Commit graph

190 commits

Author SHA1 Message Date
Linus Torvalds
7355a5a654 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  mtd/nand_ids: Fix buswidth
  mtd/m25p80: fix test for end of loop
  mtd/m25p80: retlen is never NULL
  MIPS: Fix gen_nand probe structures contents
  gen_nand: Test if nr_chips field is valid
  BFIN: Fix gen_nand probe structures contents
  nand/denali: move all hardware initialization work to denali_hw_init
  nand/denali: Add a page check in denali_read_page & denali_read_page_raw
  nand/denali: use cpu_relax() while waiting for hardware interrupt
  nand/denali: change read_status function method
  nand/denali: Fixed check patch warnings
  ARM: Fix gen_nand probe structures contents
  mtd/nand_base: fix kernel-doc warnings & typos
  nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
  nand/denali: Fixed handle ECC error bugs
  nand/denali: use iowrite32() to replace denali_write32()
  nand/denali: Fixed probe function bugs
2010-08-15 17:32:47 -07:00
Marek Vasut
ef077179a2 ARM: Fix gen_nand probe structures contents
These three platforms didn't properly fill nr_chips in gen_nand 
registration and therefore depended on gen_nand bug fixed by commit 
81cbb0b177 ("mtd: gen_nand: fix support for 
multiple chips")

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-12 02:21:18 +01:00
Linus Torvalds
946880fa27 Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6
* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6:
  IXP4xx: Fix LL debugging on little-endian CPU.
  IXP4xx: Fix sparse warnings in I/O primitives.
  IXP4xx: Make mdio_bus struct static in the Ethernet driver.
  IXP4xx: Fix ixp4xx_crypto little-endian operation.
  IXP4xx: Prevent HSS transmitter lockup by disabling FRaMe signals.
  ixp4xx/vulcan: add PCI support
  ixp4xx: base support for Arcom Vulcan
2010-08-11 09:17:27 -07:00
Russell King
ceb0885d3b Merge branch 'misc' into devel
Conflicts:
	arch/arm/mm/init.c
2010-07-31 14:20:02 +01:00
Kirill A. Shutemov
6338a6aa7c ARM: 6269/1: Add 'code' parameter for hook_fault_code()
Add one more parameter to hook_fault_code() to be able to set 'code'
field of struct fsr_info.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:48:34 +01:00
Russell King
b65b4781fb ARM: Remove 'node' argument form arch_adjust_zones()
Since we no longer support discontigmem, node is always zero, so
remove this argument.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:36 +01:00
Krzysztof Hałasa
42ea573f87 IXP4xx: Fix LL debugging on little-endian CPU.
IXP4xx only needs +3 offset for UART registers when running in big-endian mode.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2010-05-27 13:49:55 +02:00
Krzysztof Hałasa
59c290176e IXP4xx: Fix sparse warnings in I/O primitives.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2010-05-27 13:02:43 +02:00
Marc Zyngier
ee977c2c4f ixp4xx/vulcan: add PCI support
Add PCI support for the Vulcan board, supporting USB and CF ports.
The PC/104 bus (actually a hack on the second CarBus slot) is not
currently supported.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2010-05-27 13:02:42 +02:00
Marc Zyngier
4d9be47f3d ixp4xx: base support for Arcom Vulcan
This patch adds some basic support for the Arcom Vulcan (ixp425 based).

Supported devices include:
- XR16L551 serial ports
- External watchdog
- Flash
- SRAM
- 1-wire id

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2010-05-27 13:02:42 +02:00
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Russell King
6262c92f51 ARM: Remove useless linux/bootmem.h includes
These files include linux/bootmem.h without using anything from this
file; remove the unnecessary include.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:48 +01:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
FUJITA Tomonori
6fee48cd33 dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask
This converts arm to the generic pci_set_dma_mask and
pci_set_consistent_dma_mask (removes HAVE_ARCH_PCI_SET_DMA_MASK for
dmabounce).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Looked-over-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
Russell King
2741ecb4ce Merge branch 'misc2' into devel 2010-02-25 22:09:41 +00:00
Russell King
186f93ea1f Merge branch 'tmpreg' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-25 22:07:25 +00:00
Fenkart/Bostandzhyan
c931b4f655 ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
Makes it consistent with VMALLOC_START

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00
Tony Lindgren
4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Mikael Pettersson
e00d9d4b17 ARM: 5869/1: ixp4xx: implement sched_clock()
Add a better sched_clock() to the ixp4xx platform,
implemented via its clocksource support.

This is based on the sched_clock() I implemented for
the IOP platform. Tested on a ds101 ixp420 machine.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-27 22:04:18 +00:00
Krzysztof Hałasa
0fd7dc7f6c IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:41 +01:00
Krzysztof Hałasa
8d3fdf31dd IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:41 +01:00
Krzysztof Hałasa
a8b7b34075 IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
31bcde3785 IXP4xx: Remove unused Motorola PrPMC1100 platform macros.
PrPMC1100 is handled by IXDP425 platform code, there is no need for
duplicate set of macros. Remove them.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
914e7bc28e IXP4xx: move FSG platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
395e71276c IXP4xx: move DSM G600 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
23fa6846a2 IXP4xx: move NAS100D platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
c1117c63d5 IXP4xx: move NSLU2 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
f89f44902a IXP4xx: move Coyote platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
ec66969685 IXP4xx: move AVILA platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
9bf4d67689 IXP4xx: move IXDP425 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
ed5b9fa0d1 IXP4xx: Extend PCI MMIO indirect address space to 1 GB.
IXP4xx CPUs can indirectly access the whole 4 GB PCI MMIO address space (using
the non-prefetch registers). Previously the available space depended on the CPU
variant, since one of the IXP43x platforms needed more than the usual 128 MB.
1 GB should be enough for everyone, and if not, we can trivially increase it.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
cba362221b IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI.
Instead of including the heavy linux/mm.h for VMALLOC_START, test the addresses
against PCI MIN and MAX addresses. Indirect PCI uses 1:1 mapping for MMIO space
making this change possible.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
58e570d118 IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
28f85cd3f6 IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:38 +01:00
Roel Kluin
efec194f57 IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request().
The indexes were signed, so negatives were possible.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:38 +01:00
Krzysztof Hałasa
9f2c94928a ARM: fix insl() and outsl() endianness on IXP4xx architecture.
The repetitive in/out functions must preserve order, not value.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:38 +01:00
Krzysztof Hałasa
6e30de84ab IXP4xx: change the timer base frequency to 66.666000 MHz.
Clock generators used by IXP4xx processors are usually 33.333 MHz, sometimes
33.33 MHz and few platforms use 33 MHz. The timers tick twice as fast,
that means 66.666, 66.66 or 66 MHz. Current 66.666666 MHz means 10 ppm
offset from the usual 66.666 MHz.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:37 +01:00
Mikael Pettersson
74c32e7234 ixp4xx: arch_idle() documentation fixup
The body of the mach-ixp4xx arch_idle() is mysteriously
disabled by an #if 0 .. #endif. Normally one would expect
to find a call to cpu_do_idle() there, but that call is
disabled, even though cpu_do_idle() is implemented for
XScale cores (and ixp4xx is one).

The explanation can be found in the ixp42x developer's manual
which states that the XScale core clock and power management
registers aren't implemented on ixp42x [3.5.2.2].

Also, the disabled code has suffered from bit rot:
- it checks hlt_counter which is obsolete, as that variable
  and all related code now is private to kernel/process.c
- it passes too many parameters to cpu_do_idle()

So this patch:
- adds a comment before the #if 0 to explain why
  cpu_do_idle() mustn't be called on ixp4xx
- removes the obsolete test of hlt_counter and the
  obsolete parameter to cpu_do_idle()

This is purely a documentation fixup and changes no
generated code. Even so, it has been tested on an
ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-09-21 19:20:03 +02:00
Mikael Pettersson
ceb69a899f ixp4xx: timer and clocks cleanups
This patch does a few simple cleanups of the ixp4xx timer
and clocksource/clockevent code in mach-ixp4xx/common.c:

- ixp4xx_clocksource_init() is static and always returns 0,
  which is ignored by its only caller: make it return void
- ixp4xx_clockevent_init(): ditto
- ixp4xx_get_cycles() is only referenced locally: make it static
- use the ixp4xx_timer_irq.dev_id field to pass &clockevent_ixp4xx
  to ixp4xx_timer_interrupt() via its dev_id parameter, allowing
  the code in ixp4xx_timer_interrupt() to be smaller and faster

Tested on an ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-09-21 19:20:03 +02:00
Linus Torvalds
d7e9660ad9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.
2009-09-14 10:37:28 -07:00
Krzysztof Halasa
5dbc46506a IXP42x HSS support for setting internal clock rate
HSS usually uses external clocks, so it's not a big deal. Internal clock
is used for direct DTE-DTE connections and when the DCE doesn't provide
it's own clock.

This also depends on the oscillator frequency. Intel seems to have
calculated the clock register settings for 33.33 MHz (66.66 MHz timer
base). Their settings seem quite suboptimal both in terms of average
frequency (60 ppm is unacceptable for G.703 applications, their primary
intended usage(?)) and jitter.

Many (most?) platforms use a 33.333 MHz oscillator, a 10 ppm difference
from Intel's base.

Instead of creating static tables, I've created a procedure to program
the HSS clock register. The register consists of 3 parts (A, B, C).
The average frequency (= bit rate) is:
66.66x MHz / (A  + (B + 1) / (C + 1))
The procedure aims at the closest average frequency, possibly at the
cost of increased jitter. Nobody would be able to directly drive an
unbufferred transmitter with a HSS anyway, and the frequency error is
what it really counts.

I've verified the above with an oscilloscope on IXP425. It seems IXP46x
and possibly IXP43x use a bit different clock generation algorithm - it
looks like the avg frequency is:
(on IXP465) 66.66x MHz / (A  + B / (C + 1)).
Also they use much greater precomputed A and B - on IXP425 it would
simply result in more jitter, but I don't know how does it work on
IXP46x (perhaps 3 least significant bits aren't used?).

Anyway it looks that they were aiming for exactly +60 ppm or -60 ppm,
while <1 ppm is typically possible (with a synchronized clock, of
course).

The attached patch makes it possible to set almost any bit rate
(my IXP425 533 MHz quits at > 22 Mb/s if a single port is used, and the
minimum is ca. 65 Kb/s).

This is independent of MVIP (multi-E1/T1 on one HSS) mode.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07 01:56:49 -07:00
Mikael Pettersson
dee2b904a1 IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes
2.6.31-rc kernels don't boot on my ixp4xx box (ds101), because the libata
driver doesn't find the PCI IDE controller any more. 2.6.30 was fine.
I traced this to a PCI update (1f82de10d6)
in 2.6.30-git19. Diffing the kernel boot logs from 2.6.30-git18 and
2.6.30-git19 illustrates the breakage:

> --- dmesg-2.6.30-git18	2009-08-04 01:45:22.000000000 +0200
> +++ dmesg-2.6.30-git19	2009-08-04 01:45:46.000000000 +0200
> @@ -26,6 +26,13 @@
>  pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot
>  pci 0000:00:02.2: PME# disabled
>  PCI: bus0: Fast back to back transfers disabled
> +pci 0000:00:01.0: BAR 0: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 1: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 2: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 3: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.1: BAR 4: can't allocate I/O resource [0x10000-0xffff]
>  bio: create slab <bio-0> at 0
>  SCSI subsystem initialized
>  NET: Registered protocol family 2
> @@ -44,11 +51,7 @@
>  console [ttyS0] enabled
>  serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
>  Driver 'sd' needs updating - please use bus_type methods
> -PCI: enabling device 0000:00:01.0 (0140 -> 0141)
> -scsi0 : pata_artop
> -scsi1 : pata_artop
> -ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1060 bmdma 0x1040 irq 28
> -ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1064 bmdma 0x1048 irq 28
> +pata_artop 0000:00:01.0: no available native port
>  Using configured DiskOnChip probe address 0x50000000
>  DiskOnChip found at 0x50000000
>  NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit)

The specific change in 1f82de10d6 responsible
for this failure turned out to be the following:

> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
>  		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
>  		if (type == pci_bar_io) {
>  			l &= PCI_BASE_ADDRESS_IO_MASK;
> -			mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
> +			mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
>  		} else {
>  			l &= PCI_BASE_ADDRESS_MEM_MASK;
>  			mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;

Every arch except arm's ixp4xx defines IO_SPACE_LIMIT as an all-bits-one
bitmask, typically -1UL but sometimes only a 16-bit 0x0000ffff. But ixp4xx
defines it as 0xffff0000, which is now causing the PCI failures.

Russell King noted that ixp4xx has 64KB PCI IO space, so IO_SPACE_LIMIT
should be 0x0000ffff. This patch makes that change, which fixes the PCI
failures on my ixp4xx box.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-08-11 19:22:20 +02:00
Krzysztof Hałasa
9733bb8e9c IXP4xx: Change QMgr function names to qmgr_stat_*_watermark and clean the comments.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-25 13:25:34 +02:00
Krzysztof Hałasa
11c79740d3 IXP4xx: support for Goramo MultiLink router platform.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:58:30 +02:00
Krzysztof Hałasa
0771c69394 IXP42x: Use __fls() in QMgr interrupt handlers.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:37:04 +02:00
Krzysztof Hałasa
d4c9e9fc97 IXP42x: Add QMgr support for IXP425 rev. A0 processors.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:36:03 +02:00
Krzysztof Hałasa
61a5ccc85a IXP42x: add NPE support for IXP425 rev. A0 processors.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:16:23 +02:00
Krzysztof Hałasa
8a4fe82497 IXP42x: Identify Intel IXP425 rev. A0 processors.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:16:21 +02:00
Krzysztof Hałasa
a6a9fb857b IXP4xx: Add support for the second half of the 64 hardware queues.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-20 15:27:07 +02:00
Linus Torvalds
2ad20802b7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits)
  bonding: fix panic if initialization fails
  IXP4xx: complete Ethernet netdev setup before calling register_netdev().
  IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.
  ipvs: Fix IPv4 FWMARK virtual services
  ipv4: Make INET_LRO a bool instead of tristate.
  net: remove stale reference to fastroute from Kconfig help text
  net: update skb_recycle_check() for hardware timestamping changes
  bnx2: Fix panic in bnx2_poll_work().
  net-sched: fix bfifo default limit
  igb: resolve panic on shutdown when SR-IOV is enabled
  wimax: oops: wimax_dev_add() is the only one that can initialize the state
  wimax: fix oops if netlink fails to add attribute
  Bluetooth: Move dev_set_name() to a context that can sleep
  netfilter: ctnetlink: fix wrong message type in user updates
  netfilter: xt_cluster: fix use of cluster match with 32 nodes
  netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE
  netfilter: add missing linux/types.h include to xt_LED.h
  mac80211: pid, fix memory corruption
  mac80211: minstrel, fix memory corruption
  cfg80211: fix comment on regulatory hint processing
  ...
2009-05-10 10:46:45 -07:00