Commit graph

18 commits

Author SHA1 Message Date
Jiro SEKIBA
abdb318b79 nilfs2: replace mark_inode_dirty as nilfs_mark_inode_dirty
Replace mark_inode_dirty() as nilfs_mark_inode_dirty()
to reduce deep function calls.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:16 +09:00
Jiro SEKIBA
9ca941d4b6 nilfs2: delete mark_inode_dirty in nilfs_new_inode
It is redundant to call mark_inode_dirty() in nilfs_new_inode() because
all caller of nilfs_new_inode() will call mark_inode_dirty()
after calling nilfs_new_inode() directly or indirectly in transaction.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-27 20:05:15 +09:00
Ryusuke Konishi
9cb4e0d2b9 nilfs2: move out mark_inode_dirty calls from bmap routines
Previously, nilfs_bmap_add_blocks() and nilfs_bmap_sub_blocks() called
mark_inode_dirty() after they changed the number of data blocks.

This moves these calls outside bmap outermost functions like
nilfs_bmap_insert() or nilfs_bmap_truncate().

This will mitigate overhead for truncate or delete operation since
they repeatedly remove set of blocks.  Nearly 10 percent improvement
was observed for removal of a large file:

 # dd if=/dev/zero of=/test/aaa bs=1M count=512
 # time rm /test/aaa

  real  2.968s -> 2.705s

Further optimization may be possible by eliminating these
mark_inode_dirty() uses though I avoid mixing separate changes here.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Ryusuke Konishi
a49762fd11 nilfs2: remove buffer locking in nilfs_mark_inode_dirty
This lock is eliminable because inodes on the buffer can be updated
independently.  Although a log writer also fills in bmap data on the
on-disk inodes, this update is exclusively done by a log writer lock.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Jiro SEKIBA
18dafac1a4 nilfs2: deleted inconsistent comment in nilfs_load_inode_block()
The comment says, "Caller of this function MUST lock s_inode_lock",
however just above the comment, it locks s_inode_lock in the function.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-15 17:17:46 +09:00
Ryusuke Konishi
3cc811bffd nilfs2: fix missing initialization of i_dir_start_lookup member
The i_dir_start_lookup field in nilfs_inode_info objects should be
cleared when the objects are allocated, but the the initialization was
missing in case of reading from disk.  This adds the initialization.

Since the variable just gives a start page on directory lookups, the
bug was nonfatal until now.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-29 20:32:13 +09:00
Alexey Dobriyan
7f09410bbc const: mark remaining address_space_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Ryusuke Konishi
1b2f5a641b nilfs2: fix ignored error code in __nilfs_read_inode()
The __nilfs_read_inode function is ignoring the error code returned
from nilfs_read_inode_common(), and wrongly delivers a success code
(zero) when it escapes from the function in erroneous cases.

This adds the missing error handling.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:12 +09:00
Al Viro
d441b1c293 switch nilfs2 to inode->i_acl
Actually, get rid of private analog, since nothing in there is
using ACLs at all so far.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:17:05 -04:00
Ryusuke Konishi
c3a7abf06c nilfs2: support contiguous lookup of blocks
Although get_block() callback function can return extent of contiguous
blocks with bh->b_size, nilfs_get_block() function did not support
this feature.

This adds contiguous lookup feature to the block mapping codes of
nilfs, and allows the nilfs_get_blocks() function to return the extent
information by applying the feature.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:12 +09:00
Ryusuke Konishi
e85dc1d529 nilfs2: enable sync_page method
This adds a missing sync_page method which unplugs bio requests when
waiting for page locks. This will improve read performance of nilfs.

Here is a measurement result using dd command.

Without this patch:

 # mount -t nilfs2 /dev/sde1 /test
 # dd if=/test/aaa of=/dev/null bs=512k
 1024+0 records in
 1024+0 records out
 536870912 bytes (537 MB) copied, 6.00688 seconds, 89.4 MB/s

With this patch:

 # mount -t nilfs2 /dev/sde1 /test
 # dd if=/test/aaa of=/dev/null bs=512k
 1024+0 records in
 1024+0 records out
 536870912 bytes (537 MB) copied, 3.54998 seconds, 151 MB/s

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Hisashi Hifumi
258ef67e24 NILFS2: Pagecache usage optimization on NILFS2
Hi,

I introduced "is_partially_uptodate" aops for NILFS2.

A page can have multiple buffers and even if a page is not uptodate, some buffers
can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read after
random write workloads can be optimized and we can get performance improvement.

I did a performance test using the sysbench.

1 --file-block-size=8K --file-total-size=2G --file-test-mode=rndrw --file-fsync-freq=0 --fil
e-rw-ratio=1 run

-2.6.30-rc5

Test execution summary:
    total time:                          151.2907s
    total number of events:              200000
    total time taken by event execution: 2409.8387
    per-request statistics:
         min:                            0.0000s
         avg:                            0.0120s
         max:                            0.9306s
         approx.  95 percentile:         0.0439s

Threads fairness:
    events (avg/stddev):           12500.0000/238.52
    execution time (avg/stddev):   150.6149/0.01

-2.6.30-rc5-patched

Test execution summary:
    total time:                          140.8828s
    total number of events:              200000
    total time taken by event execution: 2240.8577
    per-request statistics:
         min:                            0.0000s
         avg:                            0.0112s
         max:                            0.8750s
         approx.  95 percentile:         0.0418s

Threads fairness:
    events (avg/stddev):           12500.0000/218.43
    execution time (avg/stddev):   140.0536/0.01

arch: ia64
pagesize: 16k

Thanks.

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi
612392307c nilfs2: support nanosecond timestamp
After a review of user's feedback for finding out other compatibility
issues, I found nilfs improperly initializes timestamps in inode;
CURRENT_TIME was used there instead of CURRENT_TIME_SEC even though nilfs
didn't have nanosecond timestamps on disk.  A few users gave us the report
that the tar program sometimes failed to expand symbolic links on nilfs,
and it turned out to be the cause.

Instead of applying the above displacement, I've decided to support
nanosecond timestamps on this occation.  Fortunetaly, a needless 64-bit
field was in the nilfs_inode struct, and I found it's available for this
purpose without impact for the users.

So, this will do the enhancement and resolve the tar problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:20 -07:00
Ryusuke Konishi
458c5b0822 nilfs2: clean up sketch file
The sketch file is a file to mark checkpoints with user data.  It was
experimentally introduced in the original implementation, and now
obsolete.  The file was handled differently with regular files; the file
size got truncated when a checkpoint was created.

This stops the special treatment and will treat it as a regular file.
Most users are not affected because mkfs.nilfs2 no longer makes this file.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi
1f5abe7e7d nilfs2: replace BUG_ON and BUG calls triggerable from ioctl
Pekka Enberg advised me:
> It would be nice if BUG(), BUG_ON(), and panic() calls would be
> converted to proper error handling using WARN_ON() calls. The BUG()
> call in nilfs_cpfile_delete_checkpoints(), for example, looks to be
> triggerable from user-space via the ioctl() system call.

This will follow the comment and keep them to a minimum.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi
47420c7998 nilfs2: avoid double error caused by nilfs_transaction_end
Pekka Enberg pointed out that double error handlings found after
nilfs_transaction_end() can be avoided by separating abort operation:

 OK, I don't understand this. The only way nilfs_transaction_end() can
 fail is if we have NILFS_TI_SYNC set and we fail to construct the
 segment. But why do we want to construct a segment if we don't commit?

 I guess what I'm asking is why don't we have a separate
 nilfs_transaction_abort() function that can't fail for the erroneous
 case to avoid this double error value tracking thing?

This does the separation and renames nilfs_transaction_end() to
nilfs_transaction_commit() for clarification.

Since, some calls of these functions were used just for exclusion control
against the segment constructor, they are replaced with semaphore
operations.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:17 -07:00
Ryusuke Konishi
f30bf3e40f nilfs2: fix missed-sync issue for do_sync_mapping_range()
Chris Mason pointed out that there is a missed sync issue in
nilfs_writepages():

On Wed, 17 Dec 2008 21:52:55 -0500, Chris Mason wrote:
> It looks like nilfs_writepage ignores WB_SYNC_NONE, which is used by
> do_sync_mapping_range().

where WB_SYNC_NONE in do_sync_mapping_range() was replaced with
WB_SYNC_ALL by Nick's patch (commit:
ee53a891f4).

This fixes the problem by letting nilfs_writepages() write out the log of
file data within the range if sync_mode is WB_SYNC_ALL.

This involves removal of nilfs_file_aio_write() which was previously
needed to ensure O_SYNC sync writes.

Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:15 -07:00
Ryusuke Konishi
05fe58fdc1 nilfs2: inode operations
This adds inode level operations of the nilfs2 file system.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:14 -07:00