Commit graph

21 commits

Author SHA1 Message Date
David Sterba
3dde6ad8fc Fix trivial typos in Kconfig* files
Fix several typos in help text in Kconfig* files.

Signed-off-by: David Sterba <dave@jikos.cz>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 07:12:20 +02:00
David Gibson
d9b55a0361 [POWERPC] Early serial debug support for PPC44x
This adds support for early serial debugging via the built in
port on IBM/AMCC PowerPC 44x CPUs.  It uses a bolted TLB entry in
address space 1 for the UART's mapping, allowing robust debugging both
before and after the initialization of the MMU.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 14:47:33 +10:00
Benjamin Herrenschmidt
370a908db1 [POWERPC] DEBUG_PAGEALLOC for 64-bit
Here's an implementation of DEBUG_PAGEALLOC for 64 bits powerpc.
It applies on top of the 32 bits patch.

Unlike Anton's previous attempt, I'm not using updatepp. I'm removing
the hash entries from the bolted mapping (using a map in RAM of all the
slots). Expensive but it doesn't really matter, does it ? :-)

Memory hot-added doesn't benefit from this unless it's added at an
address that is below end_of_DRAM() as calculated at boot time.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 arch/powerpc/Kconfig.debug      |    2
 arch/powerpc/mm/hash_utils_64.c |   84 ++++++++++++++++++++++++++++++++++++++--
 2 files changed, 82 insertions(+), 4 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:39 +10:00
Benjamin Herrenschmidt
88df6e90fa [POWERPC] DEBUG_PAGEALLOC for 32-bit
Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT
mapping and is only tested with Hash table based processor though it
shouldn't be too hard to adapt it to others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 arch/powerpc/Kconfig.debug       |    9 ++++++
 arch/powerpc/mm/init_32.c        |    4 +++
 arch/powerpc/mm/pgtable_32.c     |   52 +++++++++++++++++++++++++++++++++++++++
 arch/powerpc/mm/ppc_mmu_32.c     |    4 ++-
 include/asm-powerpc/cacheflush.h |    6 ++++
 5 files changed, 74 insertions(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:39 +10:00
Kumar Gala
fd42c71751 [POWERPC] Removed config options that we don't support in embedded6xx
When we started arch/powerpc we duplicated a number of config options from
arch/ppc for various platforms that are supported.  Now that we actually
support a few platforms, remove all the ones that haven't been moved over.
Additionally, this cleanup moved the 82xx/PQ2 options over into
arch/powerpc/platforms/82xx/Kconfig where they belong.  It also killed
GEN550 which doesn't exist in arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-22 10:06:40 -05:00
Olof Johansson
39c870d5b5 [POWERPC] pasemi: UART udbg support
Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Ishizaki Kou
c347b7989e [POWERPC] Celleb: basic support
This patch adds base support for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Kumar Gala
304df8f7ef [POWERPC] Enable stack debug features on ppc32
Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage
(DEBUG_STACK_USAGE) on ppc32.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 00:45:56 -06:00
Stephen Rothwell
80814be40e [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries
and therefore combined builds.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:58 +11:00
Stephen Rothwell
bbb6817790 [POWERPC] Allow xmon to build on legacy iSeries
xmon still does not run on iSeries, but this allows us to build a combined
kernel that includes it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:56 +11:00
Michael Ellerman
e0426047cb [POWERPC] Make xmon disassembly optional
While adding spu disassembly support it struck me that we're actually
carrying quite a lot of code around, just to do disassembly in the case
of a crash.

While on large systems it's not an issue, on smaller ones it might be
nice to have xmon - but without the weight of the disassembly support.
For a Cell build this saves ~230KB (!), and for pSeries ~195KB.

We still support the 'di' and 'sdi' commands, however they just dump
the instruction in hex.

Move the definitions into a header to clean xmon.c just a tiny bit.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04 20:40:32 +11:00
Olaf Hering
26c8af5f01 [POWERPC] print backtrace when entering xmon
xmon does not print a backtrace per default. This is bad on systems with
USB keyboard, the most needed info about the crash is lost.
print a backtrace during the very first xmon entry.

Booting with xmon=nobt disables the autobacktrace functionality.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13 18:39:53 +10:00
Mike Kravetz
57852a853b [POWERPC] powerpc: Instrument Hypervisor Calls
Add instrumentation for hypervisor calls on pseries.  Call statistics
include number of calls, wall time and cpu cycles (if available) and
are made available via debugfs.  Instrumentation code is behind the
HCALL_STATS config option and has no impact if not enabled.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13 18:39:53 +10:00
Michael Ellerman
cc46bb98c0 [POWERPC] Add udbg support for RTAS console
Add udbg hooks for the RTAS console, based on the RTAS put-term-char
and get-term-char calls. Along with my previous patches, this should
enable debugging as soon as early_init_dt_scan_rtas() is called.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 11:59:48 +10:00
Michael Ellerman
485a2d54db [PATCH] powerpc: Make early debugging options behave with oldconfig
If you undefine all the early debugging options and then run make oldconfig,
you don't get prompted to see if you want to enable any of them. This is
annoying.

AFAICT we can't do this just with a choice, because the choice is either
optional, in which case we don't get prompted, or not in which case we _must_
select early debugging.

So add a bool which controls whether we have early debugging at all, and then
if that's enabled provide the choice. The extra bool will actually be useful
in another patch I have lying around, so this is a win-win.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 14:35:23 +10:00
Kumar Gala
78af90629c powerpc: remove OCP references
OCP isn't used in arch/powerpc and hopefully will never be.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-03-27 23:48:37 -06:00
Michael Ellerman
296167ae17 [PATCH] powerpc: Make early debugging configurable via Kconfig
This patch adds Kconfig entries to control the early debugging options,
currently in setup_64.c.

Doing this via Kconfig rather than #defines means you can have one source tree,
which is buildable for multiple platforms - and you can enable the correct
early debug option for each platform via .config.

I made udbg_early_init() a static inline because otherwise GCC is to daft to
optimise it away when debugging is off.

Now that we have udbg_init_rtas() we can make call_rtas_display_status* static.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 14:48:26 +11:00
Prasanna S Panchamukhi
cd6b0762a0 [PATCH] Move Kprobes and Oprofile to "Instrumentation Support" menu
Andrew Morton suggested to move kprobes from kernel hacking menu, since
kernel hacking menu is in-appropriate for the Kprobes.  This patch moves
Kprobes and Oprofile under instrumentation menu.

(akpm: it's not a natural fit, but things like djprobes and the s390 guys'
statistics library need a home)

Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: John Levon <levon@movementarian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:35 -08:00
Paul Mackerras
ff64208df7 powerpc: Merge Kconfig.debug
This merges in the ppc64 bits into arch/powerpc/Kconfig.debug

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
Stephen Rothwell
eeb2d21806 powerpc: make iSeries boot
Now that we use the device tree, it helps to build it in.
It helps to links the kernel at the correct address.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:52:26 +10:00
Paul Mackerras
14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00