Commit graph

11 commits

Author SHA1 Message Date
Thomas Gleixner
b7e113dc9d clockevents: remove the suspend/resume workaround^Wthinko
In a desparate attempt to fix the suspend/resume problem on Andrews
VAIO I added a workaround which enforced the broadcast of the oneshot
timer on resume. This was actually resolving the problem on the VAIO
but was just a stupid workaround, which was not tackling the root
cause: the assignement of lower idle C-States in the ACPI processor_idle
code. The cpuidle patches, which utilize the dynamic tick feature and
go faster into deeper C-states exposed the problem again. The correct
solution is the previous patch, which prevents lower C-states across
the suspend/resume.

Remove the enforcement code, including the conditional broadcast timer
arming, which helped to pamper over the real problem for quite a time.
The oneshot broadcast flag for the cpu, which runs the resume code can
never be set at the time when this code is executed. It only gets set,
when the CPU is entering a lower idle C-State.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-22 17:15:34 -07:00
Thomas Gleixner
31d9b3938c clockevents: do not shutdown the oneshot broadcast device
When a cpu goes offline it is removed from the broadcast masks. If the
mask becomes empty the code shuts down the broadcast device. This is
wrong, because the broadcast device needs to be ready for the online
cpu going idle (into a c-state, which stops the local apic timer).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-09-16 15:36:43 +02:00
Thomas Gleixner
07eec6af44 clockevents: Enforce oneshot broadcast when broadcast mask is set on resume
The jinxed VAIO refuses to resume without hitting keys on the keyboard
when this is not enforced. It is unclear why the cpu ends up in a lower
C State without notifying the clock events layer, but enforcing the
oneshot broadcast here is safe.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-09-16 15:36:43 +02:00
Thomas Gleixner
5590a536c0 clockevents: fix device replacement
When a device is replaced by a better rated device, then the broadcast
mode needs to be evaluated again. When the new device has no requirement
for broadcasting, then the broadcast bits for the CPU must be cleared.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 17:49:15 -07:00
Thomas Gleixner
18de5bc4c1 clockevents: fix resume logic
We need to make sure, that the clockevent devices are resumed, before
the tick is resumed. The current resume logic does not guarantee this.

Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock
event devices before resuming the tick / oneshot functionality.

Fixup the existing users.

Thanks to Nigel Cunningham for tracking down a long standing thinko,
which affected the jinxed VAIO.

[akpm@linux-foundation.org: xen build fix]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 17:49:15 -07:00
Thomas Gleixner
72fcde9662 Ignore bogus ACPI info for offline CPUs
Booting a SMP kernel with maxcpus=1 on a SMP system leads to a hard hang,
because ACPI ignores the maxcpus setting and sends timer broadcast info for
the offline CPUs.  This results in a stuck for ever call to
smp_call_function_single() on an offline CPU.

Ignore the bogus information and print a kernel error to remind ACPI
folks to fix it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:11 -07:00
Thomas Gleixner
cd05a1f818 [PATCH] clockevents: Fix suspend/resume to disk hangs
I finally found a dual core box, which survives suspend/resume without
crashing in the middle of nowhere. Sigh, I never figured out from the
code and the bug reports what's going on.

The observed hangs are caused by a stale state transition of the clock
event devices, which keeps the RCU synchronization away from completion,
when the non boot CPU is brought back up.

The suspend/resume in oneshot mode needs the similar care as the
periodic mode during suspend to RAM. My assumption that the state
transitions during the different shutdown/bringups of s2disk would go
through the periodic boot phase and then switch over to highres resp.
nohz mode were simply wrong.

Add the appropriate suspend / resume handling for the non periodic
modes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16 19:35:25 -07:00
Thomas Gleixner
6321dd60c7 [PATCH] Save/restore periodic tick information over suspend/resume
The programming of periodic tick devices needs to be saved/restored
across suspend/resume - otherwise we might end up with a system coming
up that relies on getting a PIT (or HPET) interrupt, while those devices
default to 'no interrupts' after powerup. (To confuse things it worked
to a certain degree on some systems because the lapic gets initialized
as a side-effect of SMP bootup.)

This suspend / resume thing was dropped unintentionally during the
last-minute -mm code reshuffling.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06 09:30:24 -08:00
Ingo Molnar
289f480af8 [PATCH] Add debugging feature /proc/timer_list
add /proc/timer_list, which prints all currently pending (high-res) timers,
all clock-event sources and their parameters in a human-readable form.

Sample output:

Timer List Version: v0.1
HRTIMER_MAX_CLOCK_BASES: 2
now at 4246046273872 nsecs

cpu: 0
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_stop_sched_tick, swapper/0
 # expires at 4246432689566 nsecs [in 386415694 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, pcscd/2050
 # expires at 4247018194689 nsecs [in 971920817 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, irqbalance/1909
 # expires at 4247351358392 nsecs [in 1305084520 nsecs]
 #3: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, crond/2157
 # expires at 4249097614968 nsecs [in 3051341096 nsecs]
 #4: <f5a90ec8>, it_real_fn, do_setitimer, syslogd/1888
 # expires at 4251329900926 nsecs [in 5283627054 nsecs]
  .expires_next   : 4246432689566 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 31306
  .idle_tick      : 4246020791890 nsecs
  .tick_stopped   : 1
  .idle_jiffies   : 986504
  .idle_calls     : 40700
  .idle_sleeps    : 36014
  .idle_entrytime : 4246019418883 nsecs
  .idle_sleeptime : 4178181972709 nsecs

cpu: 1
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_restart_sched_tick, swapper/0
 # expires at 4246050084568 nsecs [in 3810696 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, atd/2227
 # expires at 4261010635003 nsecs [in 14964361131 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, smartd/2332
 # expires at 5469485798970 nsecs [in 1223439525098 nsecs]
  .expires_next   : 4246050084568 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 24043
  .idle_tick      : 4246046084568 nsecs
  .tick_stopped   : 0
  .idle_jiffies   : 986510
  .idle_calls     : 26360
  .idle_sleeps    : 22551
  .idle_entrytime : 4246043874339 nsecs
  .idle_sleeptime : 4170763761184 nsecs

tick_broadcast_mask: 00000003
event_broadcast_mask: 00000001

CPU#0's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246432689566 nsecs

CPU#1's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246050084568 nsecs

Clock Event Device: hpet
 capabilities:   00000007
 max_delta_ns:   2147483647
 min_delta_ns:   3352
 mult:           61496110
 shift:          32
 set_next_event: hpet_next_event
 set_mode:       hpet_set_mode
 event_handler:  handle_nextevt_broadcast

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
79bf2bb335 [PATCH] tick-management: dyntick / highres functionality
With Ingo Molnar <mingo@elte.hu>

Add functions to provide dynamic ticks and high resolution timers.  The code
which keeps track of jiffies and handles the long idle periods is shared
between tick based and high resolution timer based dynticks.  The dyntick
functionality can be disabled on the kernel commandline.  Provide also the
infrastructure to support high resolution timers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Thomas Gleixner
f8381cba04 [PATCH] tick-management: broadcast functionality
With Ingo Molnar <mingo@elte.hu>

Add broadcast functionality, so per cpu clock event devices can be registered
as dummy devices or switched from/to broadcast on demand.  The broadcast
function distributes the events via the broadcast function of the clock event
device.  This is primarily designed to replace the switch apic timer to / from
IPI in power states, where the apic stops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00