Sort out ->sync_fs to not perform a superblock writeback for the wait = 0 case
as that is just an optional first pass and the superblock will be written back
properly in the next call with wait = 1. Instead perform an opportunistic
quota writeback to have less work later. Also remove the freeze special case
as we do a proper wait = 1 call in the freeze code anyway.
Also rename the function to xfs_fs_sync_fs to match the normal naming
convention, update comments and avoid calling into the laptop_mode logic on
an error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We need to do a synchronous xfs_sync_fsdata to make sure the superblock
actually is on disk when we return.
Also remove SYNC_BDFLUSH flag to xfs_sync_inodes because that particular
flag is never checked.
Move xfs_filestream_flush call later to only release inodes after they
have been written out.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
This is picking up on Felix's repost of Dave's patch to implement a
.dirty_inode method. We really need this notification because
the VFS keeps writing directly into the inode structure instead
of going through methods to update this state. In addition to
the long-known atime issue we now also have a caller in VM code
that updates c/mtime that way for shared writeable mmaps. And
I found another one that no one has noticed in practice in the FIFO
code.
So implement ->dirty_inode to set i_update_core whenever the
inode gets externally dirtied, and switch the c/mtime handling to
the same scheme we already use for atime (always picking up
the value from the Linux inode).
Note that this patch also removes the xfs_synchronize_atime call
in xfs_reclaim it was superflous as we already synchronize the time
when writing the inode via the log (xfs_inode_item_format) or the
normal buffers (xfs_iflush_int).
In addition also remove the I_CLEAR check before copying the Linux
timestamps - now that we always have the Linux inode available
we can always use the timestamps in it.
Also switch to just using file_update_time for regular reads/writes -
that will get us all optimization done to it for free and make
sure we notice early when it breaks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
fix the following 'make includecheck' warning:
fs/xfs/linux-2.6/xfs_iops.c: xfs_acl.h is included more than once.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We added the ENOSPC handling patch in xfs_create just after it got mered
with xfs_mkdir. Change the log reservation to the variable for either
the create or mkdir value so it does the right thing if get here for creating
a directory.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
- As ima_counts_put() may be called after the inode has been freed,
verify that the inode is not NULL, before dereferencing it.
- Maintain the IMA file counters in may_open() properly, decrementing
any counter increments on subsequent errors.
Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com
Signed-off-by: James Morris <jmorris@namei.org>
In ext2_rename(), dir_page is acquired through ext2_dotdot(). It is
then released through ext2_set_link() but only if old_dir != new_dir.
Failing that, the pkmap reference count is never decremented and the
page remains pinned forever. Repeat that a couple times with highmem
pages and all pkmap slots get exhausted, and every further kmap() calls
end up stalling on the pkmap_map_wait queue at which point the whole
system comes to a halt.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: ocfs2_write_begin_nolock() should handle len=0
ocfs2: invalidate dentry if its dentry_lock isn't initialized.
Tom Horsley reports that his debugger hangs when it tries to read
/proc/pid_of_tracee/maps, this happens since
"mm_for_maps: take ->cred_guard_mutex to fix the race with exec"
04b836cbf19e885f8366bccb2e4b0474346c02d
commit in 2.6.31.
But the root of the problem lies in the fact that do_execve() path calls
tracehook_report_exec() which can stop if the tracer sets PT_TRACE_EXEC.
The tracee must not sleep in TASK_TRACED holding this mutex. Even if we
remove ->cred_guard_mutex from mm_for_maps() and proc_pid_attr_write(),
another task doing PTRACE_ATTACH should not hang until it is killed or the
tracee resumes.
With this patch do_execve() does not use ->cred_guard_mutex directly and
we do not hold it throughout, instead:
- introduce prepare_bprm_creds() helper, it locks the mutex
and calls prepare_exec_creds() to initialize bprm->cred.
- install_exec_creds() drops the mutex after commit_creds(),
and thus before tracehook_report_exec()->ptrace_stop().
or, if exec fails,
free_bprm() drops this mutex when bprm->cred != NULL which
indicates install_exec_creds() was not called.
Reported-by: Tom Horsley <tom.horsley@att.net>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug introduced by mainline commit e7432675f8
The bug causes ocfs2_write_begin_nolock() to oops when len=0.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The function jffs2_nor_wbuf_flash_setup() doesn't allocate the verify buffer
if CONFIG_JFFS2_FS_WBUF_VERIFY is defined, so causing a kernel panic when
that macro is enabled and the verify function is called. Similarly the
jffs2_nor_wbuf_flash_cleanup() must free the buffer if
CONFIG_JFFS2_FS_WBUF_VERIFY is enabled.
The following patch fixes the problem.
The following patch applies to 2.6.30 kernel.
Signed-off-by: Massimo Cirillo <maxcir@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
If you enable group or project quotas on an XFS file system, then the
mount table presented through /proc/self/mounts erroneously shows
that both options are in effect for the file system. The root of
the problem is some bad logic in the xfs_showargs() function, which
is used to format the file system type-specific options in effect
for a file system.
The problem originated in this GIT commit:
Move platform specific mount option parse out of core XFS code
Date: 11/22/07
Author: Dave Chinner
SHA1 ID: a67d7c5f5d
For XFS quotas, project and group quota management are mutually
exclusive--only one can be in effect at a time. There are two
parts to managing quotas: aggregating usage information; and
enforcing limits. It is possible to have a quota in effect
(aggregating usage) but not enforced.
These features are recorded on an XFS mount point using these flags:
XFS_PQUOTA_ACCT - Project quotas are aggregated
XFS_GQUOTA_ACCT - Group quotas are aggregated
XFS_OQUOTA_ENFD - Project/group quotas are enforced
The code in error is in fs/xfs/linux-2.6/xfs_super.c:
if (mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))
seq_puts(m, "," MNTOPT_PRJQUOTA);
else if (mp->m_qflags & XFS_PQUOTA_ACCT)
seq_puts(m, "," MNTOPT_PQUOTANOENF);
if (mp->m_qflags & (XFS_GQUOTA_ACCT|XFS_OQUOTA_ENFD))
seq_puts(m, "," MNTOPT_GRPQUOTA);
else if (mp->m_qflags & XFS_GQUOTA_ACCT)
seq_puts(m, "," MNTOPT_GQUOTANOENF);
The problem is that XFS_OQUOTA_ENFD will be set in mp->m_qflags
if either group or project quotas are enforced, and as a result
both MNTOPT_PRJQUOTA and MNTOPT_GRPQUOTA will be shown as mount
options.
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
xfs_inobt_lookup is also used in xfs_itable.c, remove the STATIC modifier
from it's declaration to fix non-debug builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix a small typo in the compat ioctl handler that cause the swapext
compat handler to never be called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix a small typo in the compat ioctl handler that cause the swapext
compat handler to never be called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
xfs_trans_iget is a wrapper for xfs_iget that adds the inode to the
transaction after it is read. Except when the inode already is in the
inode cache, in which case it returns the existing locked inode with
increment lock recursion counts.
Now, no one in the tree every decrements these lock recursion counts,
so any user of this gets a potential double unlock when both the original
owner of the inode and the xfs_trans_iget caller unlock it. When looking
back in a git bisect in the historic XFS tree there was only one place
that decremented these counts, xfs_trans_iput. Introduced in commit
ca25df7a840f426eb566d52667b6950b92bb84b5 by Adam Sweeney in 1993,
and removed in commit 19f899a3ab155ff6a49c0c79b06f2f61059afaf3 by
Steve Lord in 2003. And as long as it didn't slip through git bisects
cracks never actually used in that time frame.
A quick audit of the callers of xfs_trans_iget shows that no caller
really relies on this behaviour fortunately - xfs_ialloc allows this
inode from disk so it must not be there before, and all the RT allocator
routines only every add each RT bitmap inode once.
In addition to removing lots of code and reducing the size of the inode
item this patch also avoids the double inode cache lookup in each
create/mkdir/mknod transaction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
The guarantees for O_SYNC are exactly the same as the ones we need to
make for an fsync call (and given that Linux O_SYNC is O_DSYNC the
equivalent is fdadatasync, but we treat both the same in XFS), except
with a range data writeout. Jan Kara has started unifying these two
path for filesystems using the generic helpers, and I've started to
look at XFS.
The actual transaction commited by xfs_fsync and xfs_write_sync_logforce
has a different transaction number, but actually is exactly the same.
We'll only use the fsync transaction going forward. One major difference
is that xfs_write_sync_logforce never issues a cache flush unless we
commit a transaction causing that as a side-effect, which is an obvious
bug in the O_SYNC handling. Second all the locking and i_update_size
vs i_update_core changes from 978b723712
never made it to xfs_write_sync_logforce, so we add them back.
To make xfs_fsync easily usable from the O_SYNC path, the filemap_fdatawait
call is moved up to xfs_file_fsync, so that we don't wait on the whole
file after we already waited for our portion in xfs_write.
We'll also use a plain call to filemap_write_and_wait_range instead
of the previous sync_page_rang which did it in two steps including
an half-hearted inode write out that doesn't help us.
Once we're done with this also remove the now useless i_update_size
tracking.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Don't search too far - abort if it is outside a certain radius and simply do
a linear search for the first free inode. In AGs with a million inodes this
can speed up allocation speed by 3-4x.
[hch: ported to the new xfs_ialloc.c world order]
Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Currenly we have a xfs_inobt_lookup* variant for each comparism direction,
and all these get all three fields of the inobt records passed, while the
common case is just looking for the inode number and we have only marginally
more callers than xfs_inobt_lookup* variants.
So opencode a direct call to xfs_btree_lookup for the single case where we
need all fields, and replace xfs_inobt_lookup* with a xfs_inobt_looku that
just takes the inode number and the direction for all other callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Clarify the control flow in xfs_dialloc. Factor out a helper to go to the
next node from the current one and improve the control flow by expanding
composite if statements and using gotos.
The xfs_ialloc_next_rec helper is borrowed from Dave Chinners dynamic
allocation policy patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Factor out a common helper from repeated debug checks in xfs_dialloc and
xfs_difree.
[hch: split out from Dave's dynamic allocation policy patches]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Both callers of xfs_inobt_update have the record in form of a
xfs_inobt_rec_incore_t, so just pass a pointer to it instead of the
individual variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Most callers of xfs_inobt_get_rec need to fill a xfs_inobt_rec_incore_t, and
those who don't yet are fine with a xfs_inobt_rec_incore_t, instead of the
three individual variables, too. So just change xfs_inobt_get_rec to write
the output into a xfs_inobt_rec_incore_t directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Factor out code to initialize new inode clusters into a function of it's own.
This keeps xfs_ialloc_ag_alloc smaller and better structured and enables a
future inode cluster initialization transaction. Also initialize the agno
variable earlier in xfs_ialloc_ag_alloc to avoid repeated byte swaps.
[hch: The original patch is from Dave from his unpublished inode create
transaction patch series, with some modifcations by me to apply stand-alone]
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
In the recent change by Al Viro that changes verious subsystems
to use "struct path" one case was missed in the autofs4 module
which causes mounts to no longer expire.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bp was tested for NULL a few lines before, followed by a return, and there
is no intervening modification of its value.
A simplified version of the semantic match that finds this problem is as
follows: (http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
expression E;
position p1,p2;
@@
if (x == NULL || ...) { ... when forall
return ...; }
... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\)
(
*x == NULL
|
*x != NULL
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Commit a19d9f887d removed the
ino64 option but left the XFS_INO64_OFFSET define it used
in place - just remove it.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
CONFIG_XFS_DEBUG builds still need xfs_read_agf to be
non-static, oops.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Seperating the addition and update of marks in inotify resulted in a
regression in that inotify never gets events. The inotify group mask is
always 0. This mask should be updated any time a new mark is added.
Signed-off-by: Eric Paris <eparis@redhat.com>
0db501bd06 introduced a regresion in that it now sends a nul
terminator but the length accounting when checking for space or
reporting to userspace did not take this into account. This corrects
all of the rounding logic.
Signed-off-by: Eric Paris <eparis@redhat.com>
When an event has no pathname, there's no need to pad it with a null byte and
therefore generate an inotify_event sized block of zeros. This fixes a
regression introduced by commit 0db501bd06 where
my system wouldn't finish booting because some process was being confused by
this.
Signed-off-by: Brian Rogers <brian@xyzw.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
In commit a5a0a63092, when
ocfs2_attch_dentry_lock fails, we call an extra iput and reset
dentry->d_fsdata to NULL. This resolve a bug, but it isn't
completed and the dentry is still there. When we want to use
it again, ocfs2_dentry_revalidate doesn't catch it and return
true. That make future ocfs2_dentry_lock panic out.
One bug is http://oss.oracle.com/bugzilla/show_bug.cgi?id=1162.
The resolution is to add a check for dentry->d_fsdata in
revalidate process and return false if dentry->d_fsdata is NULL,
so that a new ocfs2_lookup will be called again.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.infradead.org/users/eparis/notify:
inotify: Ensure we alwasy write the terminating NULL.
inotify: fix locking around inotify watching in the idr
inotify: do not BUG on idr entries at inotify destruction
inotify: seperate new watch creation updating existing watches
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: update documentation pointers
9p: remove unnecessary v9fses->options which duplicates the mount string
net/9p: insulate the client against an invalid error code sent by a 9p server
9p: Add missing cast for the error return value in v9fs_get_inode
9p: Remove redundant inode uid/gid assignment
9p: Fix possible regressions when ->get_sb fails.
9p: Fix v9fs show_options
9p: Fix possible memleak in v9fs_inode_from fid.
9p: minor comment fixes
9p: Fix possible inode leak in v9fs_get_inode.
9p: Check for error in return value of v9fs_fid_add
kAFS crashes when asked to read a symbolic link because page_getlink()
passes a NULL file pointer to read_mapping_page(), but afs_readpage()
expects a file pointer from which to extract a key.
Modify afs_readpage() to request the appropriate key from the calling
process's keyrings if a file struct is not supplied with one attached.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before the rewrite copy_event_to_user always wrote a terqminating '\0'
byte to user space after the filename. Since the rewrite that
terminating byte was skipped if your filename is exactly a multiple of
event_size. Ouch!
So add one byte to name_size before we round up and use clear_user to
set userspace to zero like /dev/zero does instead of copying the
strange nul_inotify_event. I can't quite convince myself len_to_zero
will never exceed 16 and even if it doesn't clear_user should be more
efficient and a more accurate reflection of what the code is trying to
do.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
The are races around the idr storage of inotify watches. It's possible
that a watch could be found from sys_inotify_rm_watch() in the idr, but it
could be removed from the idr before that code does it's removal. Move the
locking and the refcnt'ing so that these have to happen atomically.
Signed-off-by: Eric Paris <eparis@redhat.com>
If an inotify watch is left in the idr when an fsnotify group is destroyed
this will lead to a BUG. This is not a dangerous situation and really
indicates a programming bug and leak of memory. This patch changes it to
use a WARN and a printk rather than killing people's boxes.
Signed-off-by: Eric Paris <eparis@redhat.com>
There is nothing known wrong with the inotify watch addition/modification
but this patch seperates the two code paths to make them each easy to
verify as correct.
Signed-off-by: Eric Paris <eparis@redhat.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
ext3: Improve error message that changing journaling mode on remount is not possible
ext3: Update Kconfig description of EXT3_DEFAULTS_TO_ORDERED
Commit 76db6d9500 (nfs41: add session setup
to the state manager) introduces an infinite loop possibility in the NFSv4
state manager. By first checking nfs4_has_session() before clearing the
NFS4CLNT_SESSION_SETUP flag, it allows for a situation where someone sets
that flag, but it never gets cleared, and so the state manager loops.
In fact commit c3fad1b1aa (nfs41: add session
reset to state manager) causes this to happen every time we get a network
partition error.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/dlm: Wait on lockres instead of erroring cancel requests
ocfs2: Add missing lock name
ocfs2: Don't oops in ocfs2_kill_sb on a failed mount
ocfs2: release the buffer head in ocfs2_do_truncate.
ocfs2: Handle quota file corruption more gracefully
2.6.30's commit 8a0bdec194 removed
user_shm_lock() calls in hugetlb_file_setup() but left the
user_shm_unlock call in shm_destroy().
In detail:
Assume that can_do_hugetlb_shm() returns true and hence user_shm_lock()
is not called in hugetlb_file_setup(). However, user_shm_unlock() is
called in any case in shm_destroy() and in the following
atomic_dec_and_lock(&up->__count) in free_uid() is executed and if
up->__count gets zero, also cleanup_user_struct() is scheduled.
Note that sched_destroy_user() is empty if CONFIG_USER_SCHED is not set.
However, the ref counter up->__count gets unexpectedly non-positive and
the corresponding structs are freed even though there are live
references to them, resulting in a kernel oops after a lots of
shmget(SHM_HUGETLB)/shmctl(IPC_RMID) cycles and CONFIG_USER_SCHED set.
Hugh changed Stefan's suggested patch: can_do_hugetlb_shm() at the
time of shm_destroy() may give a different answer from at the time
of hugetlb_file_setup(). And fixed newseg()'s no_id error path,
which has missed user_shm_unlock() ever since it came in 2.6.9.
Reported-by: Stefan Huber <shuber2@gmail.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Tested-by: Stefan Huber <shuber2@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
