Commit graph

20 commits

Author SHA1 Message Date
Catalin Marinas
f5886c7f96 kmemleak: Protect the seq start/next/stop sequence by rcu_read_lock()
Objects passed to kmemleak_seq_next() have an incremented reference
count (hence not freed) but they may point via object_list.next to
other freed objects. To avoid this, the whole start/next/stop sequence
must be protected by rcu_read_lock().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 12:34:58 -07:00
Catalin Marinas
53238a60dd kmemleak: Allow partial freeing of memory blocks
Functions like free_bootmem() are allowed to free only part of a memory
block. This patch adds support for this via the kmemleak_free_part()
callback which removes the original object and creates one or two
additional objects as a result of the memory block split.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-07-08 14:25:14 +01:00
Catalin Marinas
2587362eaf kmemleak: Scan objects allocated during a scanning episode
Many of the false positives in kmemleak happen on busy systems where
objects are allocated during a kmemleak scanning episode. These objects
aren't scanned by default until the next memory scan. When such object
is added, for example, at the head of a list, it is possible that all
the other objects in the list become unreferenced until the next scan.

This patch adds checking for newly allocated objects at the end of the
scan and repeats the scanning on these objects. If Linux allocates
new objects at a higher rate than their scanning, it stops after a
predefined number of passes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:13 +01:00
Catalin Marinas
b87324d082 kmemleak: Do not acquire scan_mutex in kmemleak_open()
Initially, the scan_mutex was acquired in kmemleak_open() and released
in kmemleak_release() (corresponding to /sys/kernel/debug/kmemleak
operations). This was causing some lockdep reports when the file was
closed from a different task than the one opening it. This patch moves
the scan_mutex acquiring in kmemleak_write() or kmemleak_seq_start()
with releasing in kmemleak_seq_stop().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:13 +01:00
Catalin Marinas
288c857d66 kmemleak: Remove the reported leaks number limitation
Since the leaks are no longer printed to the syslog, there is no point
in keeping this limitation. All the suspected leaks are shown on
/sys/kernel/debug/kmemleak file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:12 +01:00
Catalin Marinas
4b8a96744c kmemleak: Add more cond_resched() calls in the scanning thread
Following recent fix to no longer reschedule in the scan_block()
function, the system may become unresponsive with !PREEMPT. This patch
re-adds the cond_resched() call to scan_block() but conditioned by the
allow_resched parameter.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-07 10:32:56 +01:00
Catalin Marinas
bf2a76b317 kmemleak: Renice the scanning thread to +10
This is a long-running thread but not high-priority. So it makes sense
to renice it to +10.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-07 10:32:55 +01:00
Ingo Molnar
57d81f6f39 kmemleak: Fix scheduling-while-atomic bug
One of the kmemleak changes caused the following
scheduling-while-holding-the-tasklist-lock regression on x86:

BUG: sleeping function called from invalid context at mm/kmemleak.c:795
in_atomic(): 1, irqs_disabled(): 0, pid: 1737, name: kmemleak
2 locks held by kmemleak/1737:
 #0:  (scan_mutex){......}, at: [<c10c4376>] kmemleak_scan_thread+0x45/0x86
 #1:  (tasklist_lock){......}, at: [<c10c3bb4>] kmemleak_scan+0x1a9/0x39c
Pid: 1737, comm: kmemleak Not tainted 2.6.31-rc1-tip #59266
Call Trace:
 [<c105ac0f>] ? __debug_show_held_locks+0x1e/0x20
 [<c102e490>] __might_sleep+0x10a/0x111
 [<c10c38d5>] scan_yield+0x17/0x3b
 [<c10c3970>] scan_block+0x39/0xd4
 [<c10c3bc6>] kmemleak_scan+0x1bb/0x39c
 [<c10c4331>] ? kmemleak_scan_thread+0x0/0x86
 [<c10c437b>] kmemleak_scan_thread+0x4a/0x86
 [<c104d73e>] kthread+0x6e/0x73
 [<c104d6d0>] ? kthread+0x0/0x73
 [<c100959f>] kernel_thread_helper+0x7/0x10
kmemleak: 834 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The bit causing it is highly dubious:

static void scan_yield(void)
{
        might_sleep();

        if (time_is_before_eq_jiffies(next_scan_yield)) {
                schedule();
                next_scan_yield = jiffies + jiffies_scan_yield;
        }
}

It called deep inside the codepath and in a conditional way,
and that is what crapped up when one of the new scan_block()
uses grew a tasklist_lock dependency.

This minimal patch removes that yielding stuff and adds the
proper cond_resched().

The background scanning thread could probably also be reniced
to +10.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01 10:26:23 -07:00
Catalin Marinas
b6e687221e kmemleak: Do not warn if an unknown object is freed
vmap'ed memory blocks are not tracked by kmemleak (yet) but they may be
released with vfree() which is tracked. The corresponding kmemleak
warning is only enabled in debug mode. Future patch will add support for
ioremap and vmap.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-29 17:14:14 +01:00
Catalin Marinas
17bb9e0d90 kmemleak: Do not report new leaked objects if the scanning was stopped
If the scanning was stopped with a signal, it is possible that some
objects are left with a white colour (potential leaks) and reported. Add
a check to avoid reporting such objects.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-29 17:14:13 +01:00
Catalin Marinas
acf4968ec9 kmemleak: Slightly change the policy on newly allocated objects
Newly allocated objects are more likely to be reported as false
positives. Kmemleak ignores the reporting of objects younger than 5
seconds. However, this age was calculated after the memory scanning
completed which usually takes longer than 5 seconds. This patch
make the minimum object age calculation in relation to the start of the
memory scanning.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:29 +01:00
Catalin Marinas
4698c1f2bb kmemleak: Do not trigger a scan when reading the debug/kmemleak file
Since there is a kernel thread for automatically scanning the memory, it
makes sense for the debug/kmemleak file to only show its findings. This
patch also adds support for "echo scan > debug/kmemleak" to trigger an
intermediate memory scan and eliminates the kmemleak_mutex (scan_mutex
covers all the cases now).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:27 +01:00
Catalin Marinas
bab4a34afc kmemleak: Simplify the reports logged by the scanning thread
Because of false positives, the memory scanning thread may print too
much information. This patch changes the scanning thread to only print
the number of newly suspected leaks. Further information can be read
from the /sys/kernel/debug/kmemleak file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:26 +01:00
Catalin Marinas
e0a2a1601b kmemleak: Enable task stacks scanning by default
This is to reduce the number of false positives reported.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:25 +01:00
Catalin Marinas
a9d9058aba kmemleak: Allow the early log buffer to be configurable.
(feature suggested by Sergey Senozhatsky)

Kmemleak needs to track all the memory allocations but some of these
happen before kmemleak is initialised. These are stored in an internal
buffer which may be exceeded in some kernel configurations. This patch
adds a configuration option with a default value of 400 and also removes
the stack dump when the early log buffer is exceeded.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
2009-06-25 10:16:13 +01:00
Joe Perches
ae281064be kmemleak: use pr_fmt
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-23 14:40:26 +01:00
Catalin Marinas
2030117d27 kmemleak: Fix some typos in comments
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-17 18:29:04 +01:00
Catalin Marinas
000814f44e kmemleak: Rename kmemleak_panic to kmemleak_stop
This is to avoid the confusion created by the "panic" word.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-17 18:29:03 +01:00
Catalin Marinas
216c04b0d8 kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations
Kmemleak allocates memory for pointer tracking and it tries to avoid
using GFP_ATOMIC if the caller doesn't require it. However other gfp
flags may be passed by the caller which aren't required by kmemleak.
This patch filters the gfp flags so that only GFP_KERNEL | GFP_ATOMIC
are used.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-17 18:29:02 +01:00
Catalin Marinas
3c7b4e6b8b kmemleak: Add the base support
This patch adds the base support for the kernel memory leak
detector. It traces the memory allocation/freeing in a way similar to
the Boehm's conservative garbage collector, the difference being that
the unreferenced objects are not freed but only shown in
/sys/kernel/debug/kmemleak. Enabling this feature introduces an
overhead to memory allocations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2009-06-11 17:03:28 +01:00