Commit graph

54 commits

Author SHA1 Message Date
Paul Mackerras
9b781727fd powerpc: Move cpu_setup_6xx.S and temp.c over to arch/powerpc
Also renamed temp.c to tau_6xx.c (for thermal assist unit) and updated
the Kconfig option description and help text for CONFIG_TAU.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 19:15:26 +11:00
Akinobu Mita
e779b2f95f [PATCH] bitops: powerpc: use generic bitops
- remove __{,test_and_}{set,clear,change}_bit() and test_bit()
- remove generic_fls64()
- remove generic_hweight{64,32,16,8}()
- remove sched_find_first_bit()

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:14 -08:00
Paul Mackerras
23dd640112 Merge ../linux-2.6 2006-03-17 12:01:19 +11:00
Michael Ellerman
cd9c99d7e5 [PATCH] powerpc: Clarify wording for CRASH_DUMP Kconfig option
The wording of the CRASH_DUMP Kconfig option is not very clear. It gives you a
kernel that can be used _as_ the kdump kernel, not a kernel that can boot into
a kdump kernel.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16 16:55:00 +11:00
Paul Mackerras
6749c55073 Merge ../powerpc-merge 2006-02-28 16:35:24 +11:00
Linus Torvalds
add2b6fdae Make Kprobes depend on modules
Commit 9ec4b1f356 made kprobes not compile
without module support, so just make that clear in the Kconfig file.

Also, since it's marked EXPERIMENTAL, make that dependency explicit too.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26 20:24:40 -08:00
Paul Mackerras
c6622f63db powerpc: Implement accurate task and CPU time accounting
This implements accurate task and cpu time accounting for 64-bit
powerpc kernels.  Instead of accounting a whole jiffy of time to a
task on a timer interrupt because that task happened to be running at
the time, we now account time in units of timebase ticks according to
the actual time spent by the task in user mode and kernel mode.  We
also count the time spent processing hardware and software interrupts
accurately.  This is conditional on CONFIG_VIRT_CPU_ACCOUNTING.  If
that is not set, we do tick-based approximate accounting as before.

To get this accurate information, we read either the PURR (processor
utilization of resources register) on POWER5 machines, or the timebase
on other machines on

* each entry to the kernel from usermode
* each exit to usermode
* transitions between process context, hard irq context and soft irq
  context in kernel mode
* context switches.

On POWER5 systems with shared-processor logical partitioning we also
read both the PURR and the timebase at each timer interrupt and
context switch in order to determine how much time has been taken by
the hypervisor to run other partitions ("steal" time).  Unfortunately,
since we need values of the PURR on both threads at the same time to
accurately calculate the steal time, and since we can only calculate
steal time on a per-core basis, the apportioning of the steal time
between idle time (time which we ceded to the hypervisor in the idle
loop) and actual stolen time is somewhat approximate at the moment.

This is all based quite heavily on what s390 does, and it uses the
generic interfaces that were added by the s390 developers,
i.e. account_system_time(), account_user_time(), etc.

This patch doesn't add any new interfaces between the kernel and
userspace, and doesn't change the units in which time is reported to
userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(),
times(), etc.  Internally the various task and cpu times are stored in
timebase units, but they are converted to USER_HZ units (1/100th of a
second) when reported to userspace.  Some precision is therefore lost
but there should not be any accumulating error, since the internal
accumulation is at full precision.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 14:05:56 +11:00
Kumar Gala
00adbf62bd [PATCH] powerpc: Add CONFIG_DEFAULT_UIMAGE for embedded boards
Embedded boards that u-boot require a kernel image in the uImage format.
This allows a given board to specify it wants a uImage built by default.

This also fixes a warning at config time, as this symbol is referred
to in arch/powerpc/platforms/83xx/Kconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 17:15:01 +11:00
Kumar Gala
f4fc4a5b74 [PATCH] powerpc: Add CONFIG_DEFAULT_UIMAGE to build a uImage by default for a board
Embedded boards that u-boot require a kernel image in the uImage format.
This allows a given board to specify it wants a uImage built by default.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 16:13:36 +11:00
Becky Bruce
63dafe5728 [PATCH] powerpc: Updated Initial MPC8540 ADS port with OF Flat Dev
Updated patch for support for mpc8540_ads in arch/powerpc with a
flat OF device tree. This patch does not yet support PCI or I2C.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 16:11:06 +11:00
Haren Myneni
e8625d4635 [PATCH] powerpc: Kconfig changes for CRASH_DUMP
Noticed in 2.6.15-git9 that CRASH_DUMP option is moved to top level.
Moved CRASH_DUMP into "kernel options" next to KEXEC and this config
option supports only for PPC64 at this time.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 16:50:04 +11:00
Kumar Gala
08264cbc9f [PATCH] powerpc: Updated Kconfig and Makefiles for 83xx support
Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 15:35:29 +11:00
David Woodhouse
3b212db921 [PATCH] powerpc: Some ppc compile fixes...
This gets most of the Fedora rawhide RPM building again, as long as I
disable CHRP.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10 16:49:20 +11:00
Paul Mackerras
13b8a27229 powerpc: Introduce a new config symbol to control 16550 early debug code
The previous change by Kumar Gala in this area led to legacy_serial.c
and udbg_16550.c being built as modules when CONFIG_SERIAL_8250=m.
Fix this by introducing a new symbol, CONFIG_PPC_UDBG_16550, to
control whether these files get built, and arrange for it to be selected
for those platforms that need it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10 16:19:05 +11:00
Linus Torvalds
6150c32589 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge 2006-01-09 10:03:44 -08:00
Paul Mackerras
0a498d96a3 powerpc: set CONFIG_PPC_OF=y always for ARCH=powerpc
The CONFIG_PPC_OF symbol is used to mean that the firmware device tree
access functions are available.  Since we always have a device tree
with ARCH=powerpc, make CONFIG_PPC_OF always Y for ARCH=powerpc.

This fixes some compile errors reported by Kumar Gala, but in a
different way to his patch.  This also makes prom_parse.o be compiled
only if CONFIG_PPC_OF so that non-OF ARCH=ppc platforms will compile.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 20:17:01 +11:00
Matt Mackall
e585e47031 [PATCH] tiny: Make *[ug]id16 support optional
Configurable 16-bit UID and friends support

This allows turning off the legacy 16 bit UID interfaces on embedded platforms.

   text    data     bss     dec     hex filename
3330172  529036  190556 4049764  3dcb64 vmlinux-baseline
3328268  529040  190556 4047864  3dc3f8 vmlinux

From: Adrian Bunk <bunk@stusta.de>

    UID16 was accidentially disabled for !EMBEDDED.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:11 -08:00
Benjamin Herrenschmidt
1beb6a7d6c [PATCH] powerpc: Experimental support for new G5 Macs (#2)
This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:03:17 +11:00
Michael Ellerman
398ab1fcb9 [PATCH] powerpc: Add CONFIG_CRASH_DUMP
This patch adds a Kconfig variable, CONFIG_CRASH_DUMP, which configures the
built kernel for use as a Kdump kernel.

Currently "all" this involves is changing the value of KERNELBASE to 32 MB.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:52:14 +11:00
Andy Whitcroft
9100b205fd [PATCH] powerpc32: clean up available memory models
Clean up the currently available memory models for ppc32 under
the powerpc architecture.  We need FLATMEM for ppc32: enable it.
SPARSEMEM is not parameterised for ppc32 so disable that.  Take this
opportunity to clean up white space for FLATMEM_ENABLE.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:51:40 +11:00
Benjamin Herrenschmidt
51d3082fe6 [PATCH] powerpc: Unify udbg (#2)
This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:54 +11:00
Arnd Bergmann
67207b9664 [PATCH] spufs: The SPU file system, base
This is the current version of the spu file system, used
for driving SPEs on the Cell Broadband Engine.

This release is almost identical to the version for the
2.6.14 kernel posted earlier, which is available as part
of the Cell BE Linux distribution from
http://www.bsc.es/projects/deepcomputing/linuxoncell/.

The first patch provides all the interfaces for running
spu application, but does not have any support for
debugging SPU tasks or for scheduling. Both these
functionalities are added in the subsequent patches.

See Documentation/filesystems/spufs.txt on how to use
spufs.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:12 +11:00
Heiko J Schick
d7a301033f [PATCH] powerpc: IBMEBUS bus support
This patch adds the necessary core bus support used by device drivers
that sit on the IBM GX bus on modern pSeries machines like the Galaxy
infiniband for example. It provide transparent DMA ops (the low level
driver works with virtual addresses directly) along with a simple bus
layer using the Open Firmware matching routines.

Signed-off-by: Heiko J Schick <schickhj@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:06 +11:00
Olaf Hering
e8a167accb [PATCH] powerpc: correct the NR_CPUS description text
Update the help text to match the allowed range.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-02 14:51:35 +11:00
Mike Kravetz
f62859bb68 [PATCH] Remove SPAN_OTHER_NODES config definition
The config option SPAN_OTHER_NODES was created so that we could
make pSeries numa layouts work within the DISCONTIG memory model.
Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate
this option.

I'll be sending a separate patch to Andrew to remove the arch
independent code as pSeries was the only arch that needed this.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-18 14:45:54 +11:00
Paul Mackerras
5be396b00c powerpc: Mark PREP and embedded as broken for now
These machines don't have working ARCH=powerpc support yet, so make
them depend on BROKEN so people don't enable them inadvertently and
get compile errors.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 17:31:55 +11:00
Paul Mackerras
7568cb4ef6 powerpc: Move most remaining ppc64 files over to arch/powerpc
Also deletes files in arch/ppc64 that are no longer used now that
we don't compile with ARCH=ppc64 any more.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 17:30:17 +11:00
Anton Blanchard
45fb6cea09 [PATCH] ppc64: Convert NUMA to sparsemem (3)
Convert to sparsemem and remove all the discontigmem code in the
process. This has a few advantages:

- The old numa_memory_lookup_table can go away
- All the arch specific discontigmem magic can go away

We also remove the triple pass of memory properties and instead create a
list of per node extents that we iterate through. A final cleanup would
be to change our lmb code to store extents per node, then we can reuse
that information in the numa code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 22:21:11 +11:00
Mike Kravetz
7e9191daf6 [PATCH] Memory Add Fixes for ppc64
ppc64 needs a special sysfs probe file for adding new memory.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 15:17:38 +11:00
Mike Kravetz
0286486783 [PATCH] Memory Add Fixes for ppc64
On Tue, Nov 08, 2005 at 08:12:56AM +1100, Benjamin Herrenschmidt wrote:
> Yes, the MAX_ORDER should be different indeed. But can Kconfig do that ?
> That is have the default value be different based on a Kconfig option ?
> I don't see that ... We may have to do things differently here...

This seems to be done in other parts of the Kconfig file.  Using those
as an example, this should keep the MAX_ORDER block size at 16MB.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:20:00 +11:00
Benjamin Herrenschmidt
4350147a81 [PATCH] ppc64: SMU based macs cpufreq support
CPU freq support using 970FX powertune facility for iMac G5 and SMU
based single CPU desktop.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:17:34 +11:00
Prasanna S Panchamukhi
cd6b0762a0 [PATCH] Move Kprobes and Oprofile to "Instrumentation Support" menu
Andrew Morton suggested to move kprobes from kernel hacking menu, since
kernel hacking menu is in-appropriate for the Kprobes.  This patch moves
Kprobes and Oprofile under instrumentation menu.

(akpm: it's not a natural fit, but things like djprobes and the s390 guys'
statistics library need a home)

Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: John Levon <levon@movementarian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:35 -08:00
Benjamin Herrenschmidt
863c84b97c [PATCH] ppc: Fix ppc32 build after 64K pages
Oops, some last minute changes caused the 64K pages patch to break ppc32
build, this fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:23 -08:00
Benjamin Herrenschmidt
3c726f8dee [PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K.  The resulting kernel still boots on any
hardware.  On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.

Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 16:56:47 -08:00
Paul Mackerras
8ad200d7b7 powerpc: Merge smp-tbsync.c (the generic timebase sync routine)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 13:28:58 +11:00
Paul Mackerras
f4fcbbe9a7 powerpc: Merge remaining RTAS code
This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since
cell wants them as well as pseries (and chrp can use rtas-proc.c too,
at least in principle).  rtas_fw.c is gone, with its bits moved into
rtas_flash.c and rtas.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03 14:41:19 +11:00
Arnd Bergmann
edf03c1ee8 [PATCH] powerpc: move mmio_nvram.c over to arch/powerpc
The nvram code formally known as bpa_nvram.c is rather
generic really, so it is quite likely to be useful to
future boards not based on cell.

This patch puts it into arch/powerpc/sysdev.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:04 +11:00
Arnd Bergmann
e9add2eeb1 [PATCH] powerpc: move rtas_fw.c out of platforms/pseries
Cell uses the same code as pSeries for flashing the firmware
through rtas, so the implementation should not be part of
platforms/pseries.

Put it into arch/powerpc/kernel instead.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:59 +11:00
Arnd Bergmann
f3f66f599d [PATCH] powerpc: Rename BPA to Cell
The official name for BPA is now CBEA (Cell Broadband
Engine Architecture). This patch renames all occurences
of the term BPA to 'Cell' for easier recognition.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:44 +11:00
Andy Whitcroft
ffa27b6bc6 [PATCH] ppc64 memory model depends on NUMA
Currently when we first select memory model (FLAT, DISCONTIG, SPARSE) then
select whether the machine is NUMA.  However NUMA systems may not be FLAT.
This constraint it not honoured and we may configure a NUMA/FLAT system.

Reorder the configuration such that we choose NUMA first which allows us to
only list the memory models which are valid.  We now default NUMA for known
NUMA systems.  Note that this new order also matches that used in x86.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 15:27:39 +10:00
Paul Mackerras
b6a4ce526a powerpc: 32-bit powermac needs the mpc106 code
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 22:54:17 +10:00
Paul Mackerras
bbd0abda9c powerpc: Merge 32-bit CHRP support.
SMP still needs more work but UP gets as far as starting userspace
at least.  This uses the 64-bit-style code for spinning up the cpus.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:45:56 +10:00
Paul Mackerras
830825d6c3 powerpc: Pull out MPC106 (grackle) initialization code into its own file
This is so that the 32-bit CHRP code can use it.  The MPC106
initialization code is now in arch/powerpc/sysdev/grackle.c and
is controlled by CONFIG_PPC_MPC106.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:16:38 +10:00
Paul Mackerras
033ef338b6 powerpc: Merge rtas.c into arch/powerpc/kernel
This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c,
which contains generic RTAS functions useful on any CHRP platform,
and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain
some pSeries-specific firmware flashing bits.  The parts of rtas.c
that are to do with pSeries-specific error logging are protected
by a new CONFIG_RTAS_ERROR_LOGGING symbol.  The inclusion of rtas.o
is controlled by the CONFIG_PPC_RTAS symbol, and the relevant
platforms select that.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:05:24 +10:00
Paul Mackerras
f9bd170a87 powerpc: Merge i8259.c into arch/powerpc/sysdev
This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:47:42 +10:00
Paul Mackerras
25635c71e4 ppc: Use the indirect_pci.c from arch/powerpc/sysdev
This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:36:55 +10:00
Paul Mackerras
35499c0195 powerpc: Merge in 64-bit powermac support.
This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to
arch/powerpc/platforms/powermac/*.c and makes various minor tweaks
elsewhere.  On the powermac we now initialize ppc_md by copying
the whole pmac_md structure into it, which required some changes in
the ordering of initializations of individual fields of it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 16:02:39 +10:00
Paul Mackerras
5f29675533 powerpc: Make CONFIG_PROC_DEVICETREE independent of CONFIG_PPC_OF
... since all platforms will have a device tree.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:14:59 +10:00
Stephen Rothwell
3a5f8c5f78 powerpc: make iSeries boot again
On ARCH=ppc64 we were getting htab_hash_mask recalculated
to the correct value for our particular machine by accident.
In the merge tree, that code was commented out, so htab_hash_mask
was being corrupted.

We now set ppc64_pft_size instead which gets htab_has_mask
calculated correctly for us later.  We should put an
ibm,pft-size property in the device tree at some point.

Also set -mno-minimal-toc in some makefiles.
Allow iSeries to configure PROC_DEVICETREE.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12 10:58:00 +10:00
Paul Mackerras
187a00679a powerpc: Remove 64-bit cpu support from ppc32.
These days there is no good reason to run a ppc32 kernel on a 64-bit
cpu, rather than a ppc64 kernel, so remove the config option and a
bunch of code (and ifdefs) from head.S.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 12:49:05 +10:00