Commit graph

5971 commits

Author SHA1 Message Date
Roderick Colenbrander
64f1650247 powerpc/virtex: Add support for Xilinx PCI host bridge
This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host
bridge IPcore.

Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-06 10:14:22 -06:00
Stephen Rothwell
baf75b0a42 powerpc/pci: Fix annotation of pcibios_claim_one_bus
It was __devinit, but it is also within a CONFIG_HOTPLUG guarded section
of code, so the __devinit does nothing but cause the following warning:

WARNING: vmlinux.o(.text+0x107a8): Section mismatch in reference from the function pcibios_finish_adding_to_bus() to the function .devinit.text:pcibios_claim_one_bus()
The function pcibios_finish_adding_to_bus() references
the function __devinit pcibios_claim_one_bus().
This is often because pcibios_finish_adding_to_bus lacks a __devinit
annotation or the annotation of pcibios_claim_one_bus is wrong.

It is also only (externally) used in arch/powerpc/kernel/of_platform.c
which cannot be built as a module so don't export it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 11:09:12 +10:00
Michael Ellerman
92e02a5125 powerpc/ftrace: Use PPC_INST_NOP directly
There's no need to wrap PPC_INST_NOP in a static inline.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:36:53 +10:00
Michael Ellerman
898b160fe9 powerpc/ftrace: Remove unused macros
These macros were used in the original port, but since commit
e4486fe316 (ftrace, use probe_kernel API to modify code) they
are unused.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:36:46 +10:00
Michael Ellerman
4a9e3f8e94 powerpc/ftrace: Use ppc_function_entry() instead of GET_ADDR
Use ppc_function_entry() from code-patching.h.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:36:32 +10:00
Nathan Fontenot
f03cdb3a66 powerpc: Display processor virtualization resource allocs in lparcfg
This patch updates the output from /proc/ppc64/lparcfg to display the
processor virtualization resource allocations for a shared processor
partition.

This information is already gathered via the h_get_ppp call, we just
have to make sure that the ibm,partition-performance-parameters-level
property is >= 1 to ensure that the information is valid.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:36:10 +10:00
Anton Blanchard
f8729e8531 powerpc: Convert RTAS event scan from kernel thread to workqueue
RTAS event scan has to run across all cpus. Right now we use a kernel
thread and set_cpus_allowed but in doing so we wake up the previous cpu
unnecessarily.

Some ftrace output shows this:

previous cpu (2):
[002]  7.022331: sched_switch: task swapper:0 [140] ==> rtasd:194 [120]
[002]  7.022338: sched_switch: task rtasd:194 [120] ==> migration/2:9 [0]
[002]  7.022344: sched_switch: task migration/2:9 [0] ==> swapper:0 [140]

next cpu (3):
[003]  7.022345: sched_switch: task swapper:0 [140] ==> rtasd:194 [120]
[003]  7.022371: sched_switch: task rtasd:194 [120] ==> swapper:0 [140]

We can use schedule_delayed_work_on and avoid the unnecessary wakeup.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:35:32 +10:00
Michael Neuling
2d8ae638bb powerpc: Make the NR_CPUS max 8192
We can compile and boot with NR_CPUS=8192, so make this the max.  1024
was an arbitrary decision anyway.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:32:24 +10:00
Benjamin Herrenschmidt
435462c6e6 Merge branch 'merge' into next 2009-05-29 13:54:52 +10:00
Benjamin Herrenschmidt
8b31e49d1d powerpc: Fix up dma_alloc_coherent() on platforms without cache coherency.
The implementation we just revived has issues, such as using a
Kconfig-defined virtual address area in kernel space that nothing
actually carves out (and thus will overlap whatever is there),
or having some dependencies on being self contained in a single
PTE page which adds unnecessary constraints on the kernel virtual
address space.

This fixes it by using more classic PTE accessors and automatically
locating the area for consistent memory, carving an appropriate hole
in the kernel virtual address space, leaving only the size of that
area as a Kconfig option. It also brings some dma-mask related fixes
from the ARM implementation which was almost identical initially but
grew its own fixes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27 16:33:59 +10:00
Benjamin Herrenschmidt
f637a49e50 powerpc: Minor cleanups of kernel virt address space definitions
Make FIXADDR_TOP a compile time constant and cleanup a
couple of definitions relative to the layout of the kernel
address space on ppc32. We also print out that layout at
boot time for debugging purposes.

This is a pre-requisite for properly fixing non-coherent
DMA allocactions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27 16:32:50 +10:00
Benjamin Herrenschmidt
b16e7766d6 powerpc: Move dma-noncoherent.c from arch/powerpc/lib to arch/powerpc/mm
(pre-requisite to make the next patches more palatable)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27 16:32:05 +10:00
Benjamin Herrenschmidt
84532a0fc3 Revert "powerpc: Rework dma-noncoherent to use generic vmalloc layer"
This reverts commit 33f00dcedb.

    While it was a good idea to try to use the mm/vmalloc.c allocator instead
    of our own (in fact, ours is itself a dup on an old variant of the vmalloc
    one), unfortunately, the approach is terminally busted since
    dma_alloc_coherent() can be called at interrupt time or in atomic contexts
    and there's little chances we'll make the code in mm/vmalloc.c cope with\       that :-(

    Until we can get the generic code to forbid that idiocy and fix all
    drivers abusing it, we pretty much have no choice but revert to
    our custom virtual space allocator.

    There's also a problem with SMP safety since freeing such mapping
    would require an IPI which cannot be done at interrupt time.

    However, right now, I don't think we support any platform that is
    both SMP and has non-coherent DMA (don't laugh, I know such things
    do exist !) so we can sort that out later.

    Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27 13:33:14 +10:00
Hideo Saito
8e35961b57 powerpc/mm: Fix broken MMU PID stealing on !SMP
The recent rework of the MMU PID handling for non-hash CPUs has a
subtle bug in the !SMP "optimized" variant of the PID stealing
function.  It clears the PID in the mm context before it calls
local_flush_tlb_mm(). However, the later will not flush anything
if the PID in the context is clear...

Signed-off-by: Hideo Saito <hsaito.ppc@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-26 13:46:49 +10:00
Michael Ellerman
6eb0ac0389 powerpc/maple: Add a quirk to disable MSI for IPR on Bimini
Something in the HW or FW setup is busted and MSIs aren't working with
IPR on Bimini, so until we figure out exaxtly what's up, we quirk them
out

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-22 16:01:11 +10:00
Kumar Gala
d7b41b1fdf powerpc/pci: clean up direct access to sysdata by iseries platform
We shouldn't directly access sysdata to get the device node.  We should
be calling pci_device_to_OF_node().

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:26 +10:00
Geert Uytterhoeven
80947e7c99 powerpc: Keep track of emulated instructions
If CONFIG_PPC_EMULATED_STATS is enabled, make available counters for the
various classes of emulated instructions under
/sys/kernel/debug/powerpc/emulated_instructions/ (assumed debugfs is mounted on
/sys/kernel/debug).  Optionally (controlled by
/sys/kernel/debug/powerpc/emulated_instructions/do_warn), rate-limited warnings
can be printed to the console when instructions are emulated.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:26 +10:00
Vinay Sridhar
f312deb4cd powerpc/xmon: Add dl command to dump contents of __log_buf
Hello All,

Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf.
Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html
I've ported the patch in the above link to 2.6.30-rc5 and have tested it.

Thanks & regards,
Vinay

Signed-off-by: Michael Ellerman <michael at ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:25 +10:00
Becky Bruce
2138422bba powerpc: Use sg->dma_length in sg_dma_len() macro on 32-bit
Currently, the 32-bit code uses sg->length instead of sg->dma_lentgh
to report sg_dma_len.  However, since the default dma code for 32-bit
(the dma_direct case) sets dma_length and length to the same thing,
we should be able to use dma_length there as well.  This gets rid of
some 32-vs-64-bit ifdefs, and is needed by the swiotlb code which
actually distinguishes between dma_length and length.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:25 +10:00
Jan Blunck
45db924089 powerpc/spufs: Remove double check for non-negative dentry
This patch removes an unnecessary double check if the dentry returned by
lookup_create() is actually non-negative. Since lookup_create() itself returns
an error in this case just remove the check.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:25 +10:00
Anton Blanchard
8d165db107 powerpc: Improve decrementer accuracy
I have been looking at sources of OS jitter and notice that after a long
NO_HZ idle period we wakeup too early:

relative time (us)    event
                      timer irq exit
    999946.405        timer irq entry
         4.835        timer irq exit
        21.685        timer irq entry
         3.540          timer (tick_sched_timer) entry

Here we slept for just under a second then took a timer interrupt that did
nothing. 21.685 us later we wake up again and do the work.

We set a rather low shift value of 16 for the decrementer clockevent, which I
think is causing this issue. On this box we have a 207MHz decrementer and see:

clockevent: decrementer mult[3501] shift[16] cpu[0]

For calculations of large intervals this mult/shift combination could be
off by a significant amount. I notice the sparc code has a loop that iterates
to find a mult/shift combination that maximises the shift value while
keeping mult under 32bit. With the patch below we get:

clockevent: decrementer mult[35015c20] shift[32] cpu[15]

And we no longer see the spurious wakeups.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Kumar Gala
9aa4e7b169 powerpc/pci: Remove redundant pcnet32 fixup
The pcnet32 driver has had in its device id table for some time a match
against the "broken" vendor ID.  No need to fake out the vendor ID
with an explicit fixup.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Kumar Gala
cf6692c07a powerpc/pci: Cleanup some minor cruft
* Removed building setup-irq on ppc32, we don't use it anymore
* Remove duplicate prototype for setup_grackle() code that needs it
  gets it from <asm/grackle.h>
* Removed gratuitous pci_io_size type differences between ppc32/ppc64

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Kumar Gala
2eb4afb69f powerpc/pci: Move pseries code into pseries platform specific area
There doesn't appear to be any specific reason that we need to setup the
pseries specific notifier in generic arch pci code.  Move it into pseries
land.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Kumar Gala
58513dc40d powerpc/pci: Clean up direct access to sysdata by celleb platforms
We shouldn't directly access sysdata to get the device node to just
go get the pci_controller.  We can call pci_bus_to_host() for this
purpose.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Kumar Gala
2f52297665 powerpc/pci: Clean up direct access to sysdata by RTAS
We shouldn't directly access sysdata to get the device node but call
pci_bus_to_OF_node() for this purpose.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Kumar Gala
95272262aa powerpc/pci: Clean up direct access to sysdata by powermac platforms
We shouldn't directly access sysdata to get the device node but call
pci_bus_to_OF_node() for this purpose.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Kumar Gala
bccd6f73f0 powerpc/pci: Clean up direct access to sysdata on tsi108 platforms
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Kumar Gala
8456993ead powerpc/pci: Clean up direct access to sysdata by CHRP platforms
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Kumar Gala
f159edaef3 powerpc/pci: Clean up direct access to sysdata by 4xx platforms
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Kumar Gala
5b21fb8e76 powerpc/pci: Clean up direct access to sysdata by 52xx platforms
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:22 +10:00
Kumar Gala
8206a110cb powerpc/pci: Clean up direct access to sysdata by FSL platforms
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:22 +10:00
Kumar Gala
19afa40797 powerpc/pci: Clean up direct access to sysdata by indirect ops
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:22 +10:00
Milton Miller
60dbf43851 powerpc: Add 2.06 tlbie mnemonics
This adds the PowerPC 2.06 tlbie mnemonics and keeps backwards
compatibilty for CPUs before 2.06.

Only useful for bare metal systems.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:21 +10:00
Milton Miller
af20aeb1a3 powerpc: Enable MMU feature sections for inline asm
powerpc: Enable MMU feature sections for inline asm

This adds the ability to do MMU feature sections for inline asm.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:21 +10:00
Michael Neuling
dfb432cb96 powerpc: Move VSX load/stores into ppc-opcode.h
Cleans up the VSX load/store instructions by moving them into
ppc-opcode.h.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:21 +10:00
Michael Neuling
da6b43c833 powerpc: Cleanup macros in ppc-opcode.h
Make macros more braces happy.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:21 +10:00
Kumar Gala
d89ebca224 powerpc: Fix up elf_read_implies_exec() usage
We believe if a toolchain supports PT_GNU_STACK that it sets the proper
PHDR permissions.  Therefor elf_read_implies_exec() should only be true
if we don't see PT_GNU_STACK set.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:21 +10:00
Michael Ellerman
8e27f4dab3 powerpc/irq: We don't need __do_IRQ() anymore
So select GENERIC_HARDIRQS_NO__DO_IRQ to disable it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:20 +10:00
Michael Ellerman
f11f76d4b8 powerpc/powermac: Use generic_handle_irq() in gatwick_action()
Don't call __do_IRQ() directly in gatwick_action(), use
generic_handle_irq().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:20 +10:00
Michael Ellerman
835363e67d powerpc/irq: Remove fallback to __do_IRQ()
We should no longer have any irq code that needs __do_IRQ(), so
remove the fallback to __do_IRQ().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:20 +10:00
Michael Ellerman
9b647a30cb powerpc/irq: Move get_irq() comment into header
The guts of do_IRQ() isn't really the right place to be documenting
the ppc_md.get_irq() interface. So move the comment into machdep.h

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:43:59 +10:00
Michael Ellerman
d7cb10d6d2 powerpc/irq: Move stack overflow check into a separate function
Makes do_IRQ() shorter and clearer.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:43:58 +10:00
Michael Ellerman
f2694ba568 powerpc/irq: Move #ifdef'ed body of do_IRQ() into a separate function
Rather than a giant ifdef in the body of do_IRQ(), including a
dangling else, move the irq stack logic into a separate routine and
do the ifdef there.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:43:58 +10:00
Geoff Levand
fb94fc2b89 powerpc/ps3: Use smp_request_message_ipi
ps3 has 4 ipis per cpu and can use the new smp_request_message_ipi to
reduce path length when receiving an ipi.

This has the side effect of setting IRQF_PERCPU.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:43:58 +10:00
Robert Jennings
14f966e794 powerpc/pseries: CMO unused page hinting
Adds support for the "unused" page hint which can be used in shared
memory partitions to flag pages not in use, which will then be stolen
before active pages by the hypervisor when memory needs to be moved to
LPARs in need of additional memory.  Failure to mark pages as 'unused'
makes the LPAR slower to give up unused memory to other partitions.

This adds the kernel parameter 'cmo_free_hint' to disable this
functionality.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:43:58 +10:00
Tony Breeds
d69a78d7da powerpc/mpic: Cleanup mpic_find() implementation
mpic_find() was overloaded to do two things, finding the mpic instance
for a given interrupt and returning if it's an IPI. Instead we introduce
mpic_is_ipi() and simplify mpic_find() to just return the mpic instance

Also silences the warning:
arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_set_priority':
arch/powerpc/sysdev/mpic.c:1382: warning: 'is_ipi' may be used uninitialized in this function

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:42:56 +10:00
Sean MacLennan
805e324b7f powerpc: Update Warp to use leds-gpio driver
Now that leds-gpio is a proper OF platform driver, the Warp can use
the leds-gpio driver rather than the old out-of-kernel driver.

One side-effect is the leds-gpio driver always turns the leds off
while the old driver left them alone. So we have to set them back to
the correct settings.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:42:56 +10:00
Kumar Gala
54c181935d powerpc/fsl: Setup PCI inbound window based on actual amount of memory
Previouslly we just always set the inbound window to 2G.  This was
broken for systems with >2G.  If a system has >=4G we will need
SWIOTLB support to handle that case.

We now allocate PCICSRBAR/PEXCSRBAR right below the lowest PCI outbound
address for MMIO or the 4G boundary (if the lowest PCI address is above
4G).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:44 -05:00
Kumar Gala
01af9507ff powerpc/85xx: Add P2020DS board support
The P2020 is a dual e500v2 core based SOC with:
* 3 PCIe controllers
* 2 General purpose DMA controllers
* 2 sRIO controllers
* 3 eTSECS
* USB 2.0
* SDHC
* SPI, I2C, DUART
* enhanced localbus
* and optional Security (P2020E) security w/XOR acceleration

The p2020 DS reference board is pretty similar to the existing MPC85xx
DS boards and has a ULI 1575 connected on one of the PCIe controllers.

Signed-off-by: Ted Peters <Ted.Peters@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:43 -05:00