The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove Lindent changes as a TODO item in the wlan-ng directory of staging tree.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lindent script cleanups in wlan-ng driver in the staging tree.
This is a item in the TODO list.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The expression !(ext->alg & IW_ENCODE_ALG_WEP) appears to be incorrect,
because there are several possible values for ext->alg that give 1 when
bit-anded with IW_ENCODE_ALG_WEP. Therefore Richard Kennedy suggested to
rewrite the code with !=
Added \n at the end of the debug string as well.
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change uses of KERN_DEBUG over to pr_debug to match original driver
where messages are only needed during driver development.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move prism2 firmware loading from userspace into driver, using linux
request_firmware(). Firmware is now loaded (if available) on device
probing, before it is registered as a netdevice and advertised to userspace.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The commit 'mac80211: unify config_interface and bss_info_changed' from
Johannes Berg <johannes@sipsolutions.net> removed the config_interface structure
tag from struct ieee80211_ops. The BSSID detection functionality migrated to
ieee80211_ops.bss_info_changed.
Since wbsoft_config_interface() was largely empty, there wasn't much to do
other then to remove the function itself. There is currently no support
for BSSID change detection.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The remaining functions are local to phy_calibration.c so move them
there and remove wbhal.c.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
It's a trivial wrapper that is used in only one place, so lets inline it.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
This patch moves all the functions in wbhal.c that are used only in
wbusb.c to the latter file.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
In preparation for merging wbhal.c with wbusb.c, use Lindet to reformat
the file.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
No need to keep read-only data on the stack.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The contact details in MODULE_AUTHOR do not reflect current state of
affairs so remove it.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Use scripts/Lindent on the file and clean up the rest by hand.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The hal_set_phy_type() is called in wb35_hw_init() only so inline the
function there. Also remove a redundant assignment of ->phy_type to
RF_WB_242_1.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Remove some useless comments and clean up others.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Now that hal_halt() is called from wb35_hw_halt() only where
->InitialResource is always set to 4, we can simplify
hal_init_hardware() and hal_halt().
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: fix, cleanup
If initialization in hal_init_hardware() fails, we call hal_halt() to
clean up and release resource. However, hal_halt() will attempt to
call del_timer_sync() on ->LEDTimer on "stage 3" although it's not
initialized at that point. Fix that up by simplifying error handling
logic in hal_init_hardware() with gotos.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Use gotos to simplify the deep if-statement nesting in
hal_init_hardware().
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
Change hal_init_hardware() to return an error code rather than a boolean
to simplify error handling in wb35_hw_init().
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
The hal_init_hardware() and hal_halt() functions are only used in
wbusb.c so move them there.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Impact: cleanup
This patch replaces the switch-based error handling in wb35_hw_init()
with regular gotos.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't initialize hardware multicast filter in the driver nor do we know how
to do that. Therefore, remove some code that isn't actually used from
wbsoft_configure_filter().
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The semantic patch that makes this change is:
(http://www.emn.fr/x-info/coccinelle/)
@@ expression E; constant C; @@
(
- !E == C
+ E != C
)
Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Do not go beyond ARRAY_SIZE of wd->ap.wds.encryMode
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Cc: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
`!' has a higher precedence than `&' and `|' has a higher precedence than `?'
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wmm_param[1].ac_aci_acm_aifsn was tested twice, the second should have been
wmm_param[3].ac_aci_acm_aifsn.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use the recently added to_delayed_work() helper function.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The use of sprintf() to append to a buffer, as in
sprintf(buf, "%sEntry: %d\n", buf, i)
is not valid according to C99 ("If copying takes place between objects
that overlap, the behavior is undefined."). It breaks at least in
userspace under gcc -D_FORTIFY_SOURCE. Replace this construct with
sprintf(buf + strlen(buf), "Entry: %d\n", i)
This patch was automatically generated using
perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g'
perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g'
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bartlomiej Zolnierkiewicz