This code path doesn't test any returned pointers for NULL, leading to a bad
kernel page fault if there's no timer/intc found.
Slightly better is to BUG(), but even better still would be a printk beforehand.
Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Reviewed the Makefile on request by Michal and this is the resulting changes.
o Use ':=' for assignmnet so we do not re-evaluate for each use
o Use $(shell echo xxx) to remove ""
o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS
The settings are equally relevant for modules and the linked kernel
o Dropped LDFLAGS_BLOB - it is no longer used
o Refactored assignmnets to libs-y and core-y
o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes
and I did not wanted it spread to m68k
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
New reloc type R_MICROBLAZE_32_PCREL_LO requires a null handler (no work to do).
Remove legacy hack for broken linker pre gcc-4.1.1, that required us to extract
an offset from the code, add it to the addend, then rewrite the instruction.
Fixup the invalid reloc type error output.
Boot tested with the xilinx_emaclite ethernet driver.
Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The ipc system call is now unused in microblaze,
as the system call table points directly to the
indidual system calls for IPC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This patch add support for cases where load/store instruction
in put/get_user macro gets unaligned pointer to data and this
address is not valid. I prevent all cases which can failed.
I had to disable first stage of unaligned handler which is used
only for noMMU kernel and the whole work is done when interrupt
is enabled.
You have enable HW support for detect unaligned access in Microblaze.
This patch fixed three LTP tests:
getpeername01, getsockname01, socketpair01
Signed-off-by: Michal Simek <monstr@monstr.eu>
It is necessary to zeroed r7 when r7 points to bad
dtb - this caused that we have correct messages
about compiled-in dtb or passing via r7
Signed-off-by: Michal Simek <monstr@monstr.eu>
If r7 is zero at kernel boot, or does not point to a valid DTB, then
we fall back to a DTB (assumed to be) linked statically in the kernel, instead
of blindly copying bogus cruft into the kernel DTB memory region
Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The prototypes in syscalls.h all make sense for
microblaze, but for some of them, the actual implementation
in sys_microblaze.c needs to be adapted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
When legacy signal handling is disabled, the
arch/microblaze/kernel/signal.c implementation can
be much simpler, as most of it is handled generically
from kernel/signal.c.
This is also a prerequisite for using the generic
asm/unistd.h, which does not provide __NR_sigreturn,
because this macro is referenced by the current signal.c
implementation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Commit b99b87f70c add CONSTRUCTOR
support to Linux but Microblaze not defined KERNEL_CTORS symbols
which are used with that patch.
This patch fixed it.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Alexey removed the definition for init_mm from all architectures
but forgot microblaze, which was only recently added.
This fixes the microblaze build by dropping it there as well.
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Problem arise when is incopatibility between kernel/dts/pvr
and kernel tries to announce it. Early printk device
(uartlite in our case) was in TLB 2 and when kernel
extract DTB it necessary to allocate at least one
TLB at the end of memory. First free TLB was number two
where was early printk. But checking mechanism (kernel/dts/pvr)
was after extrahing but TLB 2 was different. This caused
that kernel hung up.
Moving early printk device to TLB 63 solve it and we don't
protect it which means that we can use early_printk messages
only for initial parts of kernel then we rewrite TLB 63.
Reported-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This patch is based on patch from Steve Magnani.
There were bug for compiled-in rootfs. We have to move
moving rootfs which is in BSS section to _ebss section
which is at the end of kernel and then clear bss section
not vice-versa.
Signed-off-by: Michal Simek <monstr@monstr.eu>
This patch fixed parsing early parameters because
current implementation does that early parse DTS
command line and then parse CMDLINE line which is compiled-in.
For case that DTS doesn't contain command line is
copied command line from kernel with is done in prom.c
that's why I can remove it from machine_early_init.
Signed-off-by: Michal Simek <monstr@monstr.eu>
We need to define set_restore_sigmask() in order to
get pselect and ppoll. Also, the setup_frame function
can not be used when __NR_sigreturn is not defined.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The security subsystem has its own initcalls, which
need support in vmlinux.lds.S.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The whole point of the __bad_xchg declaration in
system.h is to give a linker error when a variable
of invalid size is passed to __xchg. The out
of line definition in traps.c defeats this purpose
and does not any value, so remove it here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The microblaze signal handling code gets some __user
pointers wrong, as shown by sparse.
This adds the annotations where appropriate and
change sys_rt_sigreturn to correctly pass a user
stack down to do_sigaltstack instead of a kernel
structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Some device drivers require the symbols _ebss, kernel_thread,
__page_offset or ___range_ok, so export them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This patch modifies parameter of microblaze_read() from 'void' to 'struct
clocksource *cs', which fixes compile warning for incompatible parameter type.
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Michal Simek <monstr@monstr.eu>
It is not necessary to check cpuinfo.use_dcache because
this checking is done in function which call that functions
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek