Commit graph

139 commits

Author SHA1 Message Date
Al Viro
63997e98a3 split invalidate_inodes()
Pull removal of fsnotify marks into generic_shutdown_super().
Split umount-time work into a new function - evict_inodes().
Make sure that invalidate_inodes() will be able to cope with
I_FREEING once we change locking in iput().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:27:18 -04:00
Nick Piggin
6416ccb789 fs: scale files_lock
fs: scale files_lock

Improve scalability of files_lock by adding per-cpu, per-sb files lists,
protected with an lglock. The lglock provides fast access to the per-cpu lists
to add and remove files. It also provides a snapshot of all the per-cpu lists
(although this is very slow).

One difficulty with this approach is that a file can be removed from the list
by another CPU. We must track which per-cpu list the file is on with a new
variale in the file struct (packed into a hole on 64-bit archs). Scalability
could suffer if files are frequently removed from different cpu's list.

However loads with frequent removal of files imply short interval between
adding and removing the files, and the scheduler attempts to avoid moving
processes too far away. Also, even in the case of cross-CPU removal, the
hardware has much more opportunity to parallelise cacheline transfers with N
cachelines than with 1.

A worst-case test of 1 CPU allocating files subsequently being freed by N CPUs
degenerates to contending on a single lock, which is no worse than before. When
more than one CPU are allocating files, even if they are always freed by
different CPUs, there will be more parallelism than the single-lock case.

Testing results:

On a 2 socket, 8 core opteron, I measure the number of times the lock is taken
to remove the file, the number of times it is removed by the same CPU that
added it, and the number of times it is removed by the same node that added it.

Booting:    locks=  25049 cpu-hits=  23174 (92.5%) node-hits=  23945 (95.6%)
kbuild -j16 locks=2281913 cpu-hits=2208126 (96.8%) node-hits=2252674 (98.7%)
dbench 64   locks=4306582 cpu-hits=4287247 (99.6%) node-hits=4299527 (99.8%)

So a file is removed from the same CPU it was added by over 90% of the time.
It remains within the same node 95% of the time.

Tim Chen ran some numbers for a 64 thread Nehalem system performing a compile.

                throughput
2.6.34-rc2      24.5
+patch          24.9

                us      sys     idle    IO wait (in %)
2.6.34-rc2      51.25   28.25   17.25   3.25
+patch          53.75   18.5    19      8.75

So significantly less CPU time spent in kernel code, higher idle time and
slightly higher throughput.

Single threaded performance difference was within the noise of microbenchmarks.
That is not to say penalty does not exist, the code is larger and more memory
accesses required so it will be slightly slower.

Cc: linux-kernel@vger.kernel.org
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 08:35:48 -04:00
Al Viro
dca332528b no need for list_for_each_entry_safe()/resetting with superblock list
just delay __put_super() a bit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:49:02 -04:00
Al Viro
7a4dec5389 Fix sget() race with failing mount
If sget() finds a matching superblock being set up, it'll
grab an active reference to it and grab s_umount.  That's
fine - we'll wait for completion of foofs_get_sb() that way.
However, if said foofs_get_sb() fails we'll end up holding
the halfway-created superblock.  deactivate_locked_super()
called by foofs_get_sb() will just unlock the sucker since
we are holding another active reference to it.

What we need is a way to tell if superblock has been successfully
set up.  Unfortunately, neither ->s_root nor the check for
MS_ACTIVE quite fit.  Cheap and easy way, suitable for backport:
new flag set by the (only) caller of ->get_sb().  If that flag
isn't present by the time sget() grabbed s_umount on preexisting
superblock it has found, it's seeing a stillborn and should
just bury it with deactivate_locked_super() (and repeat the search).

Longer term we want to set that flag in ->get_sb() instances (and
check for it to distinguish between "sget() found us a live sb"
and "sget() has allocated an sb, we need to set it up" in there,
instead of checking ->s_root as we do now).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
2010-08-09 16:49:01 -04:00
Tejun Heo
4f331f01b9 vfs: don't hold s_umount over close_bdev_exclusive() call
Fix an obscure AB-BA deadlock in get_sb_bdev().

When a superblock is mounted more than once get_sb_bdev() calls
close_bdev_exclusive() to drop the extra bdev reference while holding
s_umount.  However, sb->s_umount nests inside bd_mutex during
__invalidate_device() and close_bdev_exclusive() acquires bd_mutex during
blkdev_put(); thus creating an AB-BA deadlock.

This condition doesn't trigger frequently.  For this condition to be
visible to lockdep, the filesystem must occupy the whole device (as
__invalidate_device() only grabs bd_mutex for the whole device), the FS
must be mounted more than once and partition rescan should be issued while
the FS is still mounted.

Fix it by dropping s_umount over close_bdev_exclusive().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:59 -04:00
npiggin@suse.de
57439f878a fs: fix superblock iteration race
list_for_each_entry_safe is not suitable to protect against concurrent
modification of the list. 6754af6 introduced a race in sb walking.

list_for_each_entry can use the trick of pinning the current entry in
the list before we drop and retake the lock because it subsequently
follows cur->next. However list_for_each_entry_safe saves n=cur->next
for following before entering the loop body, so when the lock is
dropped, n may be deleted.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Frank Mayhar <fmayhar@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-29 10:38:22 -07:00
Linus Torvalds
d28619f156 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Convert quota statistics to generic percpu_counter
  ext3 uses rb_node = NULL; to zero rb_root.
  quota: Fixup dquot_transfer
  reiserfs: Fix resuming of quotas on remount read-write
  pohmelfs: Remove dead quota code
  ufs: Remove dead quota code
  udf: Remove dead quota code
  quota: rename default quotactl methods to dquot_
  quota: explicitly set ->dq_op and ->s_qcop
  quota: drop remount argument to ->quota_on and ->quota_off
  quota: move unmount handling into the filesystem
  quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
  quota: move remount handling into the filesystem
  ocfs2: Fix use after free on remount read-only

Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
2010-05-30 09:11:11 -07:00
Randy Dunlap
7000d3c424 fs/super: fix kernel-doc warning
Fix fs/super.c kernel-doc warning and function notation:
Warning(fs/super.c:957): No description found for parameter 'sb'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:06:23 -04:00
Christoph Hellwig
123e9caf1e quota: explicitly set ->dq_op and ->s_qcop
Only set the quota operation vectors if the filesystem actually supports
quota instead of doing it for all filesystems in alloc_super().

[Jan Kara: Export dquot_operations and vfs_quotactl_ops]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:10:17 +02:00
Christoph Hellwig
e0ccfd959c quota: move unmount handling into the filesystem
Currently the VFS calls into the quotactl interface for unmounting
filesystems.  This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount.  Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.

Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem.  But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:09:12 +02:00
Christoph Hellwig
c79d967de3 quota: move remount handling into the filesystem
Currently do_remount_sb calls into the dquot code to tell it about going
from rw to ro and ro to rw.  Move this code into the filesystem to
not depend on the dquot code in the VFS - note ocfs2 already ignores
these calls and handles remount by itself.  This gets rid of overloading
the quotactl calls and allows to unify the VFS and XFS codepaths in
that area later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:06:39 +02:00
Roland Dreier
51ee049e77 vfs: add lockdep annotation to s_vfs_rename_key for ecryptfs
>  =============================================
 >  [ INFO: possible recursive locking detected ]
 >  2.6.31-2-generic #14~rbd3
 >  ---------------------------------------------
 >  firefox-3.5/4162 is trying to acquire lock:
 >   (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >
 >  but task is already holding lock:
 >   (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >
 >  other info that might help us debug this:
 >  3 locks held by firefox-3.5/4162:
 >   #0:  (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >   #1:  (&sb->s_type->i_mutex_key#11/1){+.+.+.}, at: [<ffffffff81139d5a>] lock_rename+0x6a/0xf0
 >   #2:  (&sb->s_type->i_mutex_key#11/2){+.+.+.}, at: [<ffffffff81139d6f>] lock_rename+0x7f/0xf0
 >
 >  stack backtrace:
 >  Pid: 4162, comm: firefox-3.5 Tainted: G         C 2.6.31-2-generic #14~rbd3
 >  Call Trace:
 >   [<ffffffff8108ae74>] print_deadlock_bug+0xf4/0x100
 >   [<ffffffff8108ce26>] validate_chain+0x4c6/0x750
 >   [<ffffffff8108d2e7>] __lock_acquire+0x237/0x430
 >   [<ffffffff8108d585>] lock_acquire+0xa5/0x150
 >   [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
 >   [<ffffffff815526ad>] __mutex_lock_common+0x4d/0x3d0
 >   [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
 >   [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
 >   [<ffffffff8120eaf9>] ? ecryptfs_rename+0x99/0x170
 >   [<ffffffff81552b36>] mutex_lock_nested+0x46/0x60
 >   [<ffffffff81139d31>] lock_rename+0x41/0xf0
 >   [<ffffffff8120eb2a>] ecryptfs_rename+0xca/0x170
 >   [<ffffffff81139a9e>] vfs_rename_dir+0x13e/0x160
 >   [<ffffffff8113ac7e>] vfs_rename+0xee/0x290
 >   [<ffffffff8113c212>] ? __lookup_hash+0x102/0x160
 >   [<ffffffff8113d512>] sys_renameat+0x252/0x280
 >   [<ffffffff81133eb4>] ? cp_new_stat+0xe4/0x100
 >   [<ffffffff8101316a>] ? sysret_check+0x2e/0x69
 >   [<ffffffff8108c34d>] ? trace_hardirqs_on_caller+0x14d/0x190
 >   [<ffffffff8113d55b>] sys_rename+0x1b/0x20
 >   [<ffffffff81013132>] system_call_fastpath+0x16/0x1b

The trace above is totally reproducible by doing a cross-directory
rename on an ecryptfs directory.

The issue seems to be that sys_renameat() does lock_rename() then calls
into the filesystem; if the filesystem is ecryptfs, then
ecryptfs_rename() again does lock_rename() on the lower filesystem, and
lockdep can't tell that the two s_vfs_rename_mutexes are different.  It
seems an annotation like the following is sufficient to fix this (it
does get rid of the lockdep trace in my simple tests); however I would
like to make sure I'm not misunderstanding the locking, hence the CC
list...

Signed-off-by: Roland Dreier <rdreier@cisco.com>
Cc: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:22 -04:00
Josef Bacik
18e9e5104f Introduce freeze_super and thaw_super for the fsfreeze ioctl
Currently the way we do freezing is by passing sb>s_bdev to freeze_bdev and then
letting it do all the work.  But freezing is more of an fs thing, and doesn't
really have much to do with the bdev at all, all the work gets done with the
super.  In btrfs we do not populate s_bdev, since we can have multiple bdev's
for one fs and setting s_bdev makes removing devices from a pool kind of tricky.
This means that freezing a btrfs filesystem fails, which causes us to corrupt
with things like tux-on-ice which use the fsfreeze mechanism.  So instead of
populating sb->s_bdev with a random bdev in our pool, I've broken the actual fs
freezing stuff into freeze_super and thaw_super.  These just take the
super_block that we're freezing and does the appropriate work.  It's basically
just copy and pasted from freeze_bdev.  I've then converted freeze_bdev over to
use the new super helpers.  I've tested this with ext4 and btrfs and verified
everything continues to work the same as before.

The only new gotcha is multiple calls to the fsfreeze ioctl will return EBUSY if
the fs is already frozen.  I thought this was a better solution than adding a
freeze counter to the super_block, but if everybody hates this idea I'm open to
suggestions.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:18 -04:00
Al Viro
e1e46bf186 Trim includes in fs/super.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:17 -04:00
Al Viro
d3f2147307 Move grabbing s_umount to callers of grab_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:17 -04:00
Al Viro
7ed1ee6118 Take statfs variants to fs/statfs.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:17 -04:00
Al Viro
01a05b337a new helper: iterate_supers()
... and switch the simple "loop over superblocks and do something"
loops to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:16 -04:00
Al Viro
35cf7ba0b4 Bury __put_super_and_need_restart()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:16 -04:00
Al Viro
df40c01a92 In get_super() and user_get_super() restarts are unconditional
If superblock had been still alive, we would've returned it...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:16 -04:00
Al Viro
1494583de5 fix get_active_super()/umount() race
This one needs restarts...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:15 -04:00
Al Viro
e7fe0585ca fix do_emergency_remount()/umount() races
need list_for_each_entry_safe() here.  Original didn't even
have restart logics, so if you race with umount() it blew up.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:15 -04:00
Al Viro
6754af6464 Convert simple loops over superblocks to list_for_each_entry_safe
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:15 -04:00
Al Viro
8edd64bd60 get rid of restarts in sync_filesystems()
At the same time we can kill s_need_restart and local mutex in there.
__put_super() made public for a while; will be gone later.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:15 -04:00
Al Viro
551de6f34d Leave superblocks on s_list until the end
We used to remove from s_list and s_instances at the same
time.  So let's *not* do the former and skip superblocks
that have empty s_instances in the loops over s_list.

The next step, of course, will be to get rid of rescan logics
in those loops.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:14 -04:00
Al Viro
1712ac8fda Saner locking around deactivate_super()
Make sure that s_umount is acquired *before* we drop the final
active reference; we still have the fast path (atomic_dec_unless)
and we have gotten rid of the window between the moment when
s_active hits zero and s_umount is acquired.  Which simplifies
the living hell out of grab_super() and inotify pin_to_kill()
stuff.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:14 -04:00
Al Viro
b20bd1a5e7 get rid of S_BIAS
use atomic_inc_not_zero(&sb->s_active) instead of playing games with
checking ->s_count > S_BIAS

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:14 -04:00
Al Viro
389b8be6ef get rid of open-coded grab_super() in get_active_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:14 -04:00
Christoph Hellwig
a135aa2cd7 remove incorrect comment in do_emergency_remount
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:12 -04:00
Jens Axboe
5477d0face fs: fs/super.c needs to include backing-dev.h for !CONFIG_BLOCK
When CONFIG_BLOCK is set, it ends up getting backing-dev.h included.
But for !CONFIG_BLOCK, it isn't so lucky. The proper thing to do is
include <linux/backing-dev.h> directly from the file it's used from,
so do that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-29 20:33:35 +02:00
Jörn Engel
5129a469a9 Catch filesystems lacking s_bdi
noop_backing_dev_info is used only as a flag to mark filesystems that
don't have any backing store, like tmpfs, procfs, spufs, etc.

Signed-off-by: Joern Engel <joern@logfs.org>

Changed the BUG_ON() to a WARN_ON(). Note that adding dirty inodes
to the noop_backing_dev_info is not legal and will not result in
them being flushed, but we already catch this condition in
__mark_inode_dirty() when checking for a registered bdi.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-25 08:54:42 +02:00
Al Viro
8089352a13 Mirror MS_KERNMOUNT in ->mnt_flags
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:08:00 -05:00
Nick Piggin
d208bbdda9 fs: improve remount,ro vs buffercache coherency
Invalidate sb->s_bdev on remount,ro.

Fixes a problem reported by Jorge Boncompte who is seeing corruption
trying to snapshot a minix filesystem image.  Some filesystems modify
their metadata via a path other than the bdev buffer cache (eg.  they may
use a private linear mapping for their metadata, or implement directories
in pagecache, etc).  Also, file data modifications usually go to the bdev
via their own mappings.

These updates are not coherent with buffercache IO (eg.  via /dev/bdev)
and never have been.  However there could be a reasonable expectation that
after a mount -oremount,ro operation then the buffercache should
subsequently be coherent with previous filesystem modifications.

So invalidate the bdev mappings on a remount,ro operation to provide a
coherency point.

The problem was exposed when we switched the old rd to brd because old rd
didn't really function like a normal block device and updates to rd via
mappings other than the buffercache would still end up going into its
buffercache.  But the same problem has always affected other "normal"
block devices, including loop.

[akpm@linux-foundation.org: repair comment layout]
Reported-by: "Jorge Boncompte [DTI2]" <jorge@dti2.net>
Tested-by: "Jorge Boncompte [DTI2]" <jorge@dti2.net>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 13:00:20 -05:00
Kay Sievers
9329d1beae vfs: get_sb_single() - do not pass options twice
Filesystem code usually destroys the option buffer while
parsing it. This leads to errors when the same buffer is
passed twice. In case we fill a new superblock do not call
remount.

This is needed to quite a warning that the debugfs code
causes every boot.

Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:43 -08:00
Christoph Hellwig
4504230a71 freeze_bdev: grab active reference to frozen superblocks
Currently we held s_umount while a filesystem is frozen, despite that we
might return to userspace and unlock it from a different process.  Instead
grab an active reference to keep the file system busy and add an explicit
check for frozen filesystems in remount and reject the remount instead
of blocking on s_umount.

Add a new get_active_super helper to super.c for use by freeze_bdev that
grabs an active reference to a superblock from a given block device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 07:47:41 -04:00
Christoph Hellwig
4fadd7bb20 freeze_bdev: kill bd_mount_sem
Now that we have the freeze count there is not much reason for bd_mount_sem
anymore.  The actual freeze/thaw operations are serialized using the
bd_fsfreeze_mutex, and the only other place we take bd_mount_sem is
get_sb_bdev which tries to prevent mounting a filesystem while the block
device is frozen.  Instead of add a check for bd_fsfreeze_count and
return -EBUSY if a filesystem is frozen.  While that is a change in user
visible behaviour a failing mount is much better for this case rather
than having the mount process stuck uninterruptible for a long time.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 07:47:39 -04:00
Jeff Layton
42cb56ae2a vfs: change sb->s_maxbytes to a loff_t
sb->s_maxbytes is supposed to indicate the maximum size of a file that can
exist on the filesystem.  It's declared as an unsigned long long.

Even if a filesystem has no inherent limit that prevents it from using
every bit in that unsigned long long, it's still problematic to set it to
anything larger than MAX_LFS_FILESIZE.  There are places in the kernel
that cast s_maxbytes to a signed value.  If it's set too large then this
cast makes it a negative number and generally breaks the comparison.

Change s_maxbytes to be loff_t instead.  That should help eliminate the
temptation to set it too large by making it a signed value.

Also, add a warning for couple of releases to help catch filesystems that
set s_maxbytes too large.  Eventually we can either convert this to a
BUG() or just remove it and in the hope that no one will get it wrong now
that it's a signed value.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Robert Love <rlove@google.com>
Cc: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 07:47:33 -04:00
Alexey Dobriyan
b87221de6a const: mark remaining super_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Jens Axboe
32a88aa1b6 fs: Assign bdi in super_block
We do this automatically in get_sb_bdev() from the set_bdev_super()
callback. Filesystems that have their own private backing_dev_info
must assign that in ->fill_super().

Note that ->s_bdi assignment is required for proper writeback!

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:18:51 +02:00
Jens Axboe
03ba3782e8 writeback: switch to per-bdi threads for flushing data
This gets rid of pdflush for bdi writeout and kupdated style cleaning.
pdflush writeout suffers from lack of locality and also requires more
threads to handle the same workload, since it has to work in a
non-blocking fashion against each queue. This also introduces lumpy
behaviour and potential request starvation, since pdflush can be starved
for queue access if others are accessing it. A sample ffsb workload that
does random writes to files is about 8% faster here on a simple SATA drive
during the benchmark phase. File layout also seems a LOT more smooth in
vmstat:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 0  1      0 608848   2652 375372    0    0     0 71024  604    24  1 10 48 42
 0  1      0 549644   2712 433736    0    0     0 60692  505    27  1  8 48 44
 1  0      0 476928   2784 505192    0    0     4 29540  553    24  0  9 53 37
 0  1      0 457972   2808 524008    0    0     0 54876  331    16  0  4 38 58
 0  1      0 366128   2928 614284    0    0     4 92168  710    58  0 13 53 34
 0  1      0 295092   3000 684140    0    0     0 62924  572    23  0  9 53 37
 0  1      0 236592   3064 741704    0    0     4 58256  523    17  0  8 48 44
 0  1      0 165608   3132 811464    0    0     0 57460  560    21  0  8 54 38
 0  1      0 102952   3200 873164    0    0     4 74748  540    29  1 10 48 41
 0  1      0  48604   3252 926472    0    0     0 53248  469    29  0  7 47 45

where vanilla tends to fluctuate a lot in the creation phase:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 1  1      0 678716   5792 303380    0    0     0 74064  565    50  1 11 52 36
 1  0      0 662488   5864 319396    0    0     4   352  302   329  0  2 47 51
 0  1      0 599312   5924 381468    0    0     0 78164  516    55  0  9 51 40
 0  1      0 519952   6008 459516    0    0     4 78156  622    56  1 11 52 37
 1  1      0 436640   6092 541632    0    0     0 82244  622    54  0 11 48 41
 0  1      0 436640   6092 541660    0    0     0     8  152    39  0  0 51 49
 0  1      0 332224   6200 644252    0    0     4 102800  728    46  1 13 49 36
 1  0      0 274492   6260 701056    0    0     4 12328  459    49  0  7 50 43
 0  1      0 211220   6324 763356    0    0     0 106940  515    37  1 10 51 39
 1  0      0 160412   6376 813468    0    0     0  8224  415    43  0  6 49 45
 1  1      0  85980   6452 886556    0    0     4 113516  575    39  1 11 54 34
 0  2      0  85968   6452 886620    0    0     0  1640  158   211  0  0 46 54

A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A
SSD based writeback test on XFS performs over 20% better as well, with
the throughput being very stable around 1GB/sec, where pdflush only
manages 750MB/sec and fluctuates wildly while doing so. Random buffered
writes to many files behave a lot better as well, as does random mmap'ed
writes.

A separate thread is added to sync the super blocks. In the long term,
adding sync_supers_bdi() functionality could get rid of this thread again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 09:20:25 +02:00
Jens Axboe
66f3b8e2e1 writeback: move dirty inodes from super_block to backing_dev_info
This is a first step at introducing per-bdi flusher threads. We should
have no change in behaviour, although sb_has_dirty_inodes() is now
ridiculously expensive, as there's no easy way to answer that question.
Not a huge problem, since it'll be deleted in subsequent patches.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 09:20:25 +02:00
Al Viro
f21f62208a ... and the same for vfsmount id/mount group id
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:15:26 -04:00
Al Viro
c63e09eccc Make allocation of anon devices cheaper
Standard trick - add a new variable (start) such that
for each n < start n is known to be busy.  Allocation can
skip checking everything in [0..start) and if it returns
n, we can set start to n + 1.  Freeing below start sets
start to what we'd just freed.

Of course, it still sucks if we do something like
	free 0
	allocate
	allocate
in a loop - still O(n^2) time.  However, on saner loads it
improves the things a lot and the entire thing is not worth
the trouble of switching to something with better worst-case
behaviour.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:15:25 -04:00
J. R. Okajima
b0895513f4 remove unlock_kernel() left accidentally
commit 337eb00a2c
Push BKL down into ->remount_fs()
and
commit 4aa98cf768
Push BKL down into do_remount_sb()

were uncorrectly merged.
The former removes one pair of lock/unlock_kernel(), but the latter adds
several unlock_kernel(). Finally a few unlock_kernel() calls left.

Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-17 00:36:35 -04:00
Alessio Igor Bogani
337eb00a2c Push BKL down into ->remount_fs()
[xfs, btrfs, capifs, shmem don't need BKL, exempt]

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:11 -04:00
Christoph Hellwig
ebc1ac1645 ->write_super lock_super pushdown
Push down lock_super into ->write_super instances and remove it from the
caller.

Following filesystem don't need ->s_lock in ->write_super and are skipped:

 * bfs, nilfs2 - no other uses of s_lock and have internal locks in
	->write_super
 * ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
 * reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
 	->write_super
 * xfs - no other uses of s_lock and uses internal lock (buffer lock on
	superblock buffer) to serialize ->write_super.  Also xfs_fs_write_super
	is superflous and will go away in the next merge window

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:09 -04:00
Al Viro
4aa98cf768 Push BKL down into do_remount_sb()
[folded fix from Jiri Slaby]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:08 -04:00
Al Viro
bbd6851a32 Push lock_super() into the ->remount_fs() of filesystems that care about it
Note that since we can't run into contention between remount_fs and write_super
(due to exclusion on s_umount), we have to care only about filesystems that
touch lock_super() on their own.  Out of those ext3, ext4, hpfs, sysv and ufs
do need it; fat doesn't since its ->remount_fs() only accesses assign-once
data (basically, it's "we have no atime on directories and only have atime on
files for vfat; force nodiratime and possibly noatime into *flags").

[folded a build fix from hch]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:08 -04:00
Christoph Hellwig
6cfd014842 push BKL down into ->put_super
Move BKL into ->put_super from the only caller.  A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment.  Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.

[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:07 -04:00
Al Viro
a9e220f832 No need to do lock_super() for exclusion in generic_shutdown_super()
We can't run into contention on it.  All other callers of lock_super()
either hold s_umount (and we have it exclusive) or hold an active
reference to superblock in question, which prevents the call of
generic_shutdown_super() while the reference is held.  So we can
replace lock_super(s) with get_fs_excl() in generic_shutdown_super()
(and corresponding change for unlock_super(), of course).

Since ext4 expects s_lock held for its put_super, take lock_super()
into it.  The rest of filesystems do not care at all.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:07 -04:00
Al Viro
443b94baaa Make sure that all callers of remount hold s_umount exclusive
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:07 -04:00