We don't need them anymore, so kill:
- REQ_ON_PLUG checks in various places
- !rq_mergeable() check in plug merging
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently we take a queue lock on each bio to check if there are any
throttling rules associated with the group and also update the stats.
Now access the group under rcu and update the stats without taking
the queue lock. Queue lock is taken only if there are throttling rules
associated with the group.
So the common case of root group when there are no rules, save
unnecessary pounding of request queue lock.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Now dispatch stats update is lock free. But reset of these stats still
takes blkg->stats_lock and is dependent on that. As stats are per cpu,
we should be able to just reset the stats on each cpu without any locks.
(Atleast for 64bit arch).
On 32bit arch there is a small race where 64bit updates are not atomic.
The result of this race can be that in the presence of other writers,
one might not get 0 value after reset of a stat and might see something
intermediate
One can write more complicated code to cover this race like sending IPI
to other cpus to reset stats and for offline cpus, reset these directly.
Right not I am not taking that path because reset_update is more of a
debug feature and it can happen only on 32bit arch and possibility of
it happening is small. Will fix it if it becomes a real problem. For
the time being going for code simplicity.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Some of the stats are 64bit and updation will be non atomic on 32bit
architecture. Use sequence counters on 32bit arch to make reading
of stats safe.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently we take blkg_stat lock for even updating the stats. So even if
a group has no throttling rules (common case for root group), we end
up taking blkg_lock, for updating the stats.
Make dispatch stats per cpu so that these can be updated without taking
blkg lock.
If cpu goes offline, these stats simply disappear. No protection has
been provided for that yet. Do we really need anything for that?
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Soon we will allow accessing a throtl_grp under rcu_read_lock(). Hence
start freeing up throtl_grp after one rcu grace period.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Use same helper function for root group as we use with dynamically
allocated groups to add it to various lists.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
A helper function for the code which is used at 2-3 places. Makes reading
code little easier.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently, we allocate root throtl_grp statically. But as we will be
introducing per cpu stat pointers and that will be allocated
dynamically even for root group, we might as well make whole root
throtl_grp allocation dynamic and treat it in same manner as other
groups.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently, all the cfq_group or throtl_group allocations happen while
we are holding ->queue_lock and sleeping is not allowed.
Soon, we will move to per cpu stats and also need to allocate the
per group stats. As one can not call alloc_percpu() from atomic
context as it can sleep, we need to drop ->queue_lock, allocate the
group, retake the lock and continue processing.
In throttling code, I check the queue DEAD flag again to make sure
that driver did not call blk_cleanup_queue() in the mean time.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
blkg->key = cfqd is an rcu protected pointer and hence we used to do
call_rcu(cfqd->rcu_head) to free up cfqd after one rcu grace period.
The problem here is that even though cfqd is around, there are no
gurantees that associated request queue (td->queue) or q->queue_lock
is still around. A driver might have called blk_cleanup_queue() and
release the lock.
It might happen that after freeing up the lock we call
blkg->key->queue->queue_ock and crash. This is possible in following
path.
blkiocg_destroy()
blkio_unlink_group_fn()
cfq_unlink_blkio_group()
Hence, wait for an rcu peirod if there are groups which have not
been unlinked from blkcg->blkg_list. That way, if there are any groups
which are taking cfq_unlink_blkio_group() path, can safely take queue
lock.
This is how we have taken care of race in throttling logic also.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Nobody seems to be using cfq_find_alloc_cfqg() function parameter "create".
Get rid of that.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
cgroup unaccounted_time file is created only if CONFIG_DEBUG_BLK_CGROUP=y.
there are some fields which are out side this config option. Fix that.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Group initialization code seems to be at two places. root group
initialization in blk_throtl_init() and dynamically allocated group
in throtl_find_alloc_tg(). Create a common function and use at both
the places.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.
Also fixes up conflicts in the below files.
Conflicts:
drivers/block/paride/pcd.c
drivers/cdrom/viocd.c
drivers/ide/ide-cd.c
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
blk_cleanup_queue() calls elevator_exit() and after this, we can't
touch the elevator without oopsing. __elv_next_request() must check
for this state because in the refcounted queue model, we can still
call it after blk_cleanup_queue() has been called.
This was reported as causing an oops attributable to scsi.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Let's check a scenario:
1. blk_delay_queue(q, SCSI_QUEUE_DELAY);
2. blk_run_queue_async();
the second one will became a noop, because q->delay_work already has
WORK_STRUCT_PENDING_BIT set, so the delayed work will still run after
SCSI_QUEUE_DELAY. But blk_run_queue_async actually hopes the delayed
work runs immediately.
Fix this by doing a cancel on potentially pending delayed work
before queuing an immediate run of the workqueue.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In some cases we would end up stacking discard_zeroes_data incorrectly.
Fix this by enabling the feature by default for stacking drivers and
clearing it for low-level drivers. Incorporating a device that does not
support dzd will then cause the feature to be disabled in the stacking
driver.
Also ensure that the maximum discard value does not overflow when
exported in sysfs and return 0 in the alignment and dzd fields for
devices that don't support discard.
Reported-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currentlly we first map the task to cgroup and then cgroup to
blkio_cgroup. There is a more direct way to get to blkio_cgroup
from task using task_subsys_state(). Use that.
The real reason for the fix is that it also avoids a race in generic
cgroup code. During remount/umount rebind_subsystems() is called and
it can do following with and rcu protection.
cgrp->subsys[i] = NULL;
That means if somebody got hold of cgroup under rcu and then it tried
to do cgroup->subsys[] to get to blkio_cgroup, it would get NULL which
is wrong. I was running into this race condition with ltp running on a
upstream derived kernel and that lead to crash.
So ideally we should also fix cgroup generic code to wait for rcu
grace period before setting pointer to NULL. Li Zefan is not very keen
on introducing synchronize_wait() as he thinks it will slow
down moun/remount/umount operations.
So for the time being atleast fix the kernel crash by taking a more
direct route to blkio_cgroup.
One tester had reported a crash while running LTP on a derived kernel
and with this fix crash is no more seen while the test has been
running for over 6 days.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently we return -EOPNOTSUPP in blkdev_issue_discard() if any of the
bio fails due to underlying device not supporting discard request.
However, if the device is for example dm device composed of devices
which some of them support discard and some of them does not, it is ok
for some bios to fail with EOPNOTSUPP, but it does not mean that discard
is not supported at all.
This commit removes the check for bios failed with EOPNOTSUPP and change
blkdev_issue_discard() to return operation not supported if and only if
the device does not actually supports it, not just part of the device as
some bios might indicate.
This change also fixes problem with BLKDISCARD ioctl() which now works
correctly on such dm devices.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In blkdev_issue_zeroout() we are submitting regular WRITE bios, so we do
not need to check for -EOPNOTSUPP specifically in case of error. Also
there is no need to have label submit: because there is no way to jump
out from the while cycle without an error and we really want to exit,
rather than try again. And also remove the check for (sz == 0) since at
that point sz can never be zero.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently we are waiting for every submitted REQ_DISCARD bio separately,
but it can have unwanted consequences of repeatedly flushing the queue,
so we rather submit bios in batches and wait for the entire batch, hence
narrowing the window of other ios going in.
Use bio_batch_end_io() and struct bio_batch for that purpose, the same
is used by blkdev_issue_zeroout(). Also change bio_batch_end_io() so we
always set !BIO_UPTODATE in the case of error and remove the check for
bb, since we are the only user of this function and we always set this.
Remove bio_get()/bio_put() from the blkdev_issue_discard() since
bio_alloc() and bio_batch_end_io() is doing the same thing, hence it is
not needed anymore.
I have done simple dd testing with surprising results. The script I have
used is:
for i in $(seq 10); do
echo $i
dd if=/dev/sdb1 of=/dev/sdc1 bs=4k &
sleep 5
done
/usr/bin/time -f %e ./blkdiscard /dev/sdc1
Running time of BLKDISCARD on the whole device:
with patch without patch
0.95 15.58
So we can see that in this artificial test the kernel with the patch
applied is approx 16x faster in discarding the device.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In some drives, flush requests are non-queueable. When flush request is
running, normal read/write requests can't run. If block layer dispatches
such request, driver can't handle it and requeue it. Tejun suggested we
can hold the queue when flush is running. This can avoid unnecessary
requeue. Also this can improve performance. For example, we have
request flush1, write1, flush 2. flush1 is dispatched, then queue is
hold, write1 isn't inserted to queue. After flush1 is finished, flush2
will be dispatched. Since disk cache is already clean, flush2 will be
finished very soon, so looks like flush2 is folded to flush1.
In my test, the queue holding completely solves a regression introduced by
commit 53d63e6b0d:
block: make the flush insertion use the tail of the dispatch list
It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.
which causes about 20% regression running a sysbench fileio
workload.
Stable: 2.6.39 only
Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
flush request isn't queueable in some drives. Add a flag to let driver
notify block layer about this. We can optimize flush performance with the
knowledge.
Stable: 2.6.39 only
Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
After the anticipatory scheduler was dropped, there was no need to
special-case the request_module string. As such, drop the redundant
sprintf and stack variable.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
unplug is replaced with blk_run_queue now in blk_execute_rq_nowait,
so change the comment accordingly.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
DISK_EVENT_MEDIA_CHANGE is used for both userland visible event and
internal event for revalidation of removeable devices. Some legacy
drivers don't implement proper event detection and continuously
generate events under certain circumstances. For example, ide-cd
generates media changed continuously if there's no media in the drive,
which can lead to infinite loop of events jumping back and forth
between the driver and userland event handler.
This patch updates disk event infrastructure such that it never
propagates events not listed in disk->events to userland. Those
events are processed the same for internal purposes but uevent
generation is suppressed.
This also ensures that userland only gets events which are advertised
in the @events sysfs node lowering risk of confusion.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The sort insert is the one that goes to the IO scheduler. With
the SORT_MERGE addition, we could bypass IO scheduler setup
but still ask the IO scheduler to insert the request. This would
cause an oops on switching IO schedulers through the sysfs
interface, unless the disk just happened to be idle while it
occured.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In queue_requests_store, the code looks like
if (rl->count[BLK_RW_SYNC] >= q->nr_requests) {
blk_set_queue_full(q, BLK_RW_SYNC);
} else if (rl->count[BLK_RW_SYNC]+1 <= q->nr_requests) {
blk_clear_queue_full(q, BLK_RW_SYNC);
wake_up(&rl->wait[BLK_RW_SYNC]);
}
If we don't satify the situation of "if", we can get that
rl->count[BLK_RW_SYNC} < q->nr_quests. It is the same as
rl->count[BLK_RW_SYNC]+1 <= q->nr_requests.
All the "else" should satisfy the "else if" check so it isn't
needed actually.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We do not call blk_trace_remove_sysfs() in err return path
if kobject_add() fails. This path fixes it.
Cc: stable@kernel.org
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We don't pass in a 'force_kblockd' anymore, get rid of the
stsale comment.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We are currently using this flag to check whether it's safe
to call into ->request_fn(). If it is set, we punt to kblockd.
But we get a lot of false positives and excessive punts to
kblockd, which hurts performance.
The only real abuser of this infrastructure is SCSI. So export
the async queue run and convert SCSI over to use that. There's
room for improvement in that SCSI need not always use the async
call, but this fixes our performance issue and they can fix that
up in due time.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
For some configurations of CONFIG_PREEMPT that is not true. So
get rid of __call_for_each_cic() and always uses the explicitly
rcu_read_lock() protected call_for_each_cic() instead.
This fixes a potential bug related to IO scheduler removal or
online switching.
Thanks to Paul McKenney for clarifying this.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
With all drivers and file systems converted, we only have
in-core use of this function. So remove the export.
Reporteed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly. I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If we know we are going to punt to kblockd, we can drop the queue
lock before calling into __blk_run_queue() since it only does a
safe bit test and a workqueue call. Since kblockd needs to grab
this very lock as one of the first things it does, it's a good
optimization to drop the lock before waking kblockd.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
MD can't use this since it really requires us to be able to
keep more than a single piece of state for the unplug. Commit
048c9374 added the required support for MD, so get rid of this
now unused code.
This reverts commit f75664570d.
Conflicts:
block/blk-core.c
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
md/raid requires an unplug callback, but as it does not uses
requests the current code cannot provide one.
So allow arbitrary callbacks to be attached to the blk_plug.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
For the explicit unplugging, we'd prefer to kick things off
immediately and not pay the penalty of the latency to switch
to kblockd. So let blk_finish_plug() do the run inline, while
the implicit-on-schedule-out unplug will punt to kblockd.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It's a bit of a mess currently. task->plug is being cleared
and reset in __blk_finish_plug(), and blk_finish_plug() is
testing for a NULL plug which cannot happen even from schedule()
anymore since it uses blk_needs_flush_plug() to determine
whether to call into this function at all.
So get rid of some of the cruft.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In the function blk_register_queue(), var _dev_ is already assigned by
disk_to_dev().So use it directly instead of calling disk_to_dev() again.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Modified by me to delete an empty line in the same function while
in there anyway.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There are worries that we are now consuming a lot more stack in
some cases, since we potentially call into IO dispatch from
schedule() or io_schedule(). We can reduce this problem by moving
the running of the queue to kblockd, like the old plugging scheme
did as well.
This may or may not be a good idea from a performance perspective,
depending on how many tasks have queue plugs running at the same
time. For even the slightly contended case, doing just a single
queue run from kblockd instead of multiple runs directly from the
unpluggers will be faster.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The original use for this dates back to when we had to track write
requests for serializing around barriers. That's not needed anymore,
so kill it.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This was removed with the queue plug state. But we can easily readd
by checking if this is the first request going to this queue. It's
good information to have when tracing to see how effective the
plugging is.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
MD would like to know when a queue is unplugged, so it can flush
it's bitmap writes. Add such a callback.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If the request_fn ends up blocking, we could be re-entering
the plug flush. Since the list is protected by explicitly
not allowing schedule events, this isn't a terribly good idea.
Additionally, it can cause us to recurse. As request_fn called by
__blk_run_queue is allowed to 'schedule()' (after dropping the queue
lock of course), it is possible to get a recursive call:
schedule -> blk_flush_plug -> __blk_finish_plug -> flush_plug_list
-> __blk_run_queue -> request_fn -> schedule
We must make sure that the second schedule does not call into
blk_flush_plug again. So instead of leaving the list of requests on
blk_plug->list, move them to a separate list leaving blk_plug->list
empty.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Comparison function for list_sort() must be anticommutative,
otherwise it is not sorting in ordinary meaning.
But fortunately list_sort() always check ((*cmp)(priv, a, b) <= 0)
it not distinguish negative and zero, so comparison function can
implement only less-or-equal instead of full three-way comparison.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The current block integrity (DIF/DIX) support in DM is verifying that
all devices' integrity profiles match during DM device resume (which
is past the point of no return). To some degree that is unavoidable
(stacked DM devices force this late checking). But for most DM
devices (which aren't stacking on other DM devices) the ideal time to
verify all integrity profiles match is during table load.
Introduce the notion of an "initialized" integrity profile: a profile
that was blk_integrity_register()'d with a non-NULL 'blk_integrity'
template. Add blk_integrity_is_initialized() to allow checking if a
profile was initialized.
Update DM integrity support to:
- check all devices with _initialized_ integrity profiles match
during table load; uninitialized profiles (e.g. for underlying DM
device(s) of a stacked DM device) are ignored.
- disallow a table load that would result in an integrity profile that
conflicts with a DM device's existing (in-use) integrity profile
- avoid clearing an existing integrity profile
- validate all integrity profiles match during resume; but if they
don't all we can do is report the mismatch (during resume we're past
the point of no return)
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
xchg does not work portably with smaller than 32bit types.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently we just dump a non-informative 'request botched' message.
Lets actually try and print something sane to help debug issues
around this.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When the queue work handler was converted to delayed work, the
stopping was inadvertently made sync as well. Change this back
to being async stop, using __cancel_delayed_work() instead of
cancel_delayed_work().
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
With the introduction of the on-stack plugging, we would assume
that any request being inserted was a normal file system request.
As flush/fua requires a special insert mode, this caused problems.
Fix this up by checking for this in flush_plug_list() and use
the appropriate insert mechanism.
Big thanks goes to Markus Tripplesdorf for tirelessly testing
patches, and to Sergey Senozhatsky for helping find the real
issue.
Reported-by: Markus Tripplesdorf <markus@trippelsdorf.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
Removing think time checking. A high thinktime queue might means the queue
dispatches several requests and then do away. Limitting such queue seems
meaningless. And also this can simplify code. This is suggested by Vivek.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
For v2, I added back lines to cfq_preempt_queue() that were removed
during updates for accounting unaccounted_time. Thanks for pointing out
that I'd missed these, Vivek.
Previous commit "cfq-iosched: Don't set active queue in preempt" wrongly
cleared stats for preempting queues when it shouldn't have, because when
we choose a queue to preempt, it still isn't necessarily scheduled next.
Thanks to Vivek Goyal for figuring this out and understanding how the
preemption code works.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Lina reported that if throttle limits are initially very high and then
dropped, then no new bio might be dispatched for a long time. And the
reason being that after dropping the limits we don't reset the existing
slice and do the rate calculation with new low rate and account the bios
dispatched at high rate. To fix it, reset the slice upon rate change.
https://lkml.org/lkml/2011/3/10/298
Another problem with very high limit is that we never queued the
bio on throtl service tree. That means we kept on extending the
group slice but never trimmed it. Fix that also by regulary
trimming the slice even if bio is not being queued up.
Reported-by: Lina Lu <lulina_nuaa@foxmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This change moves unaccounted_time to only be reported when
CONFIG_DEBUG_BLK_CGROUP is true.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Commit "Add unaccounted time to timeslice_used" changed the behavior of
cfq_preempt_queue to set cfqq active. Vivek pointed out that other
preemption rules might get involved, so we shouldn't manually set which
queue is active.
This cleans up the code to just clear the queue stats at preemption
time.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
One of the disadvantages of on-stack plugging is that we potentially
lose out on merging since all pending IO isn't always visible to
everybody. When we flush the on-stack plugs, right now we don't do
any checks to see if potential merge candidates could be utilized.
Correct this by adding a new insert variant, ELEVATOR_INSERT_SORT_MERGE.
It works just ELEVATOR_INSERT_SORT, but first checks whether we can
merge with an existing request before doing the insertion (if we fail
merging).
This fixes a regression with multiple processes issuing IO that
can be merged.
Thanks to Shaohua Li <shaohua.li@intel.com> for testing and fixing
an accounting bug.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
[SCSI] scsi_dh_rdac: Add MD36xxf into device list
[SCSI] scsi_debug: add consecutive medium errors
[SCSI] libsas: fix ata list corruption issue
[SCSI] hpsa: export resettable host attribute
[SCSI] hpsa: move device attributes to avoid forward declarations
[SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
[SCSI] sd: Logical Block Provisioning update
[SCSI] Include protection operation in SCSI command trace
[SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
[SCSI] target: Fix volume size misreporting for volumes > 2TB
[SCSI] bnx2fc: Broadcom FCoE offload driver
[SCSI] fcoe: fix broken fcoe interface reset
[SCSI] fcoe: precedence bug in fcoe_filter_frames()
[SCSI] libfcoe: Remove stale fcoe-netdev entries
[SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
[SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
[SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
[SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
[SCSI] libfc: Fixing a memory leak when destroying an interface
[SCSI] megaraid_sas: Version and Changelog update
...
Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
Version 3 is updated to apply to for-2.6.39/core.
For version 2, I took Vivek's advice and made sure we update the group
weight from cfq_group_service_tree_add().
If a weight was updated while a group is on the service tree, the
calculation for the total weight of the service tree can be adjusted
improperly, which either leads to bad service tree weights, or
potentially crashes (if total_weight becomes 0).
This patch defers updates to the weight until a group is off the service
tree.
Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There are two kind of times that tasks are not charged for: the first
seek and the extra time slice used over the allocated timeslice. Both
of these exported as a new unaccounted_time stat.
I think it would be good to have this reported in 'time' as well, but
that is probably a separate discussion.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
barrier is already removed, so remove the obsolete comments
in blkdev_issue_zeroout.
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
BZ29402
https://bugzilla.kernel.org/show_bug.cgi?id=29402
We can hit serious mis-synchronization in bio completion path of
blkdev_issue_zeroout() leading to a panic.
The problem is that when we are going to wait_for_completion() in
blkdev_issue_zeroout() we check if the bb.done equals issued (number of
submitted bios). If it does, we can skip the wait_for_completition()
and just out of the function since there is nothing to wait for.
However, there is a ordering problem because bio_batch_end_io() is
calling atomic_inc(&bb->done) before complete(), hence it might seem to
blkdev_issue_zeroout() that all bios has been completed and exit. At
this point when bio_batch_end_io() is going to call complete(bb->wait),
bb and wait does not longer exist since it was allocated on stack in
blkdev_issue_zeroout() ==> panic!
(thread 1) (thread 2)
bio_batch_end_io() blkdev_issue_zeroout()
if(bb) { ...
if (bb->end_io) ...
bb->end_io(bio, err); ...
atomic_inc(&bb->done); ...
... while (issued != atomic_read(&bb.done))
... (let issued == bb.done)
... (do the rest of the function)
... return ret;
complete(bb->wait);
^^^^^^^^
panic
We can fix this easily by simplifying bio_batch and completion counting.
Also remove bio_end_io_t *end_io since it is not used.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Eric Whitney <eric.whitney@hp.com>
Tested-by: Eric Whitney <eric.whitney@hp.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Use plug in throttle dispatch also as we are dispatching a bunch of
bios in throttle context and some of them might merge.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.
The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.
The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently, disk_unblock_events() implicitly kick event check if the
block count reaches zero. This behavior is not described in the
comment and hinders with future changes. Make the unblocker
explicitly check events by calling disk_check_events() as necessary.
This patch doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
We've found that we still get good, useful isolation at weights this
low. I'd like to adjust the minimum so that any other changes can take
these values into account.
Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When throttle group limits are updated through cgroups, a thread is
woken up to process these updates. While reviewing that code, oleg noted
couple of race conditions existed in the code and he also suggested that
code can be simplified.
This patch fixes the races simplifies the code based on Oleg's suggestions:
- Use xchg().
- Introduced a common function throtl_update_blkio_group_common()
which is shared now by all iops/bps update functions.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixed a merge issue, throtl_schedule_delayed_work() takes throtl_data
as the argument now, not the queue.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
With the help of cgroup interface one can go and upate the bps/iops
limits of existing group. Once the limits are udpated, a thread is
woken up to see if some blocked group needs recalculation based on new
limits and needs to be requeued.
There was also a piece of code where I was checking for group limit
update when a fresh bio comes in. This patch gets rid of that piece of
code and keeps processing the limit change at one place
throtl_process_limit_change(). It just keeps the code simple and easy
to understand.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The update_vdisktime logic is broken since commit
b54ce60eb7, st->min_vdisktime never makes
a progress. Fix it.
Thanks Vivek for pointing it out.
Signed-off-by: Gui Jianfeng <guijianfen@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If there are a sync and an async queue and the sync queue's think time
is small, we can ignore the sync queue's dispatch quantum. Because the
sync queue will always preempt the async queue, we don't need to care
about async's latency. This can fix a performance regression of
aiostress test, which is introduced by commit f8ae6e3eb8. The issue
should exist even without the commit, but the commit amplifies the
impact.
The initial post does the same optimization for RT queue too, but since
I have no real workload for it, Vivek suggests to drop it.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This merge creates two set of conflicts. One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.
The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core. The conflict
isn't trivial but the resolution is straight-forward.
* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
should be called with @force_kblockd set to %true.
* elv_insert() in blk_kick_flush() should use
%ELEVATOR_INSERT_REQUEUE.
Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.
Signed-off-by: Tejun Heo <tj@kernel.org>
Move blk_throtl_exit() in blk_cleanup_queue() as blk_throtl_exit() is
written in such a way that it needs queue lock. In blk_release_queue()
there is no gurantee that ->queue_lock is still around.
Initially blk_throtl_exit() was in blk_cleanup_queue() but Ingo reported
one problem.
https://lkml.org/lkml/2010/10/23/86
And a quick fix moved blk_throtl_exit() to blk_release_queue().
commit 7ad58c0286
Author: Jens Axboe <jaxboe@fusionio.com>
Date: Sat Oct 23 20:40:26 2010 +0200
block: fix use-after-free bug in blk throttle code
This patch reverts above change and does not try to shutdown the
throtl work in blk_sync_queue(). By avoiding call to
throtl_shutdown_timer_wq() from blk_sync_queue(), we should also avoid
the problem reported by Ingo.
blk_sync_queue() seems to be used only by md driver and it seems to be
using it to make sure q->unplug_fn is not called as md registers its
own unplug functions and it is about to free up the data structures
used by unplug_fn(). Block throttle does not call back into unplug_fn()
or into md. So there is no need to cancel blk throttle work.
In fact I think cancelling block throttle work is bad because it might
happen that some bios are throttled and scheduled to be dispatched later
with the help of pending work and if work is cancelled, these bios might
never be dispatched.
Block layer also uses blk_sync_queue() during blk_cleanup_queue() and
blk_release_queue() time. That should be safe as we are also calling
blk_throtl_exit() which should make sure all the throttling related
data structures are cleaned up.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There does not seem to be a clear convention whether q->queue_lock is
initialized or not when blk_cleanup_queue() is called. In the past it
was not necessary but now blk_throtl_exit() takes up queue lock by
default and needs queue lock to be available.
In fact elevator_exit() code also has similar requirement just that it
is less stringent in the sense that elevator_exit() is called only if
elevator is initialized.
Two problems have been noticed because of ambiguity about spin lock
status.
- If a driver calls blk_alloc_queue() and then soon calls
blk_cleanup_queue() almost immediately, (because some other
driver structure allocation failed or some other error happened)
then blk_throtl_exit() will run into issues as queue lock is not
initialized. Loop driver ran into this issue recently and I
noticed error paths in md driver too. Similar error paths should
exist in other drivers too.
- If some driver provided external spin lock and zapped the lock
before blk_cleanup_queue(), then it can lead to issues.
So this patch initializes the default queue lock at queue allocation time.
block throttling code is one of the users of queue lock and it is
initialized at the queue allocation time, so it makes sense to
initialize ->queue_lock also to internal lock. A driver can overide that
lock later. This will take care of the issue where a driver does not have
to worry about initializing the queue lock to default before calling
blk_cleanup_queue()
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Rename the numerals in the diskstats_show() into the macros.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
blk-flush decomposes a flush into sequence of multiple requests. On
completion of a request, the next one is queued; however, block layer
must not implicitly call into q->request_fn() directly from completion
path. This makes the queue behave unexpectedly when seen from the
drivers and violates the assumption that q->request_fn() is called
with process context + queue_lock.
This patch makes blk-flush the following two changes to make sure
q->request_fn() is not called directly from request completion path.
- blk_flush_complete_seq_end_io() now asks __blk_run_queue() to always
use kblockd instead of calling directly into q->request_fn().
- queue_next_fseq() uses ELEVATOR_INSERT_REQUEUE instead of
ELEVATOR_INSERT_FRONT so that elv_insert() doesn't try to unplug the
request queue directly.
Reported by Jan in the following threads.
http://thread.gmane.org/gmane.linux.ide/48778http://thread.gmane.org/gmane.linux.ide/48786
stable: applicable to v2.6.37.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
__blk_run_queue() automatically either calls q->request_fn() directly
or schedules kblockd depending on whether the function is recursed.
blk-flush implementation needs to be able to explicitly choose
kblockd. Add @force_kblockd.
All the current users are converted to specify %false for the
parameter and this patch doesn't introduce any behavior change.
stable: This is prerequisite for fixing ide oops caused by the new
blk-flush implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Effectively, make group_isolation=1 the default and remove the tunable.
The setting group_isolation=0 was because by default we idle on
sync-noidle tree and on fast devices, this can be very harmful for
throughput.
However, this problem can also be addressed by tuning slice_idle and
possibly group_idle on faster storage devices.
This change simplifies the CFQ code by removing the feature entirely.
Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Dominik Klein reported a system hang issue while doing some blkio
throttling testing.
https://lkml.org/lkml/2011/2/24/173
o Some tracing revealed that CFQ was not dispatching any more jobs as
queue unplug was not happening. And queue unplug was not happening
because unplug work was not being called as there was one throttling
work on same cpu which as not finished yet. And throttling work had not
finished as it was tyring to dispatch a bio to CFQ but all the request
descriptors were consume to it was put to sleep.
o So basically it is a cyclic dependecny between CFQ unplug work and
throtl dispatch work. Tejun suggested that use separate workqueue for
such cases.
o This patch uses a separate workqueue for throttle related work and
does not rely on kblockd workqueue anymore.
Cc: stable@kernel.org
Reported-by: Dominik Klein <dk@in-telegence.net>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-linus' of git://neil.brown.name/md:
md: Fix - again - partition detection when array becomes active
Fix over-zealous flush_disk when changing device size.
md: avoid spinlock problem in blk_throtl_exit
md: correctly handle probe of an 'mdp' device.
md: don't set_capacity before array is active.
md: Fix raid1->raid0 takeover
Adam Kovari and others reported that disconnecting an USB drive with
an ntfs-3g filesystem would cause "kernel BUG at fs/inode.c:1421!" to
be triggered.
The BUG could be traced back to ioctl(BLKBSZSET), which would
erroneously decrement the refcount on the bdev. This is because
blkdev_get() expects the refcount to be already incremented and either
returns success or decrements the refcount and returns an error.
The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().
This fixes
https://bugzilla.kernel.org/show_bug.cgi?id=29202
(and likely 29792 too)
Reported-by: Adam Kovari <kovariadam@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two cases when we call flush_disk.
In one, the device has disappeared (check_disk_change) so any
data will hold becomes irrelevant.
In the oter, the device has changed size (check_disk_size_change)
so data we hold may be irrelevant.
In both cases it makes sense to discard any 'clean' buffers,
so they will be read back from the device if needed.
In the former case it makes sense to discard 'dirty' buffers
as there will never be anywhere safe to write the data. In the
second case it *does*not* make sense to discard dirty buffers
as that will lead to file system corruption when you simply enlarge
the containing devices.
flush_disk calls __invalidate_devices.
__invalidate_device calls both invalidate_inodes and invalidate_bdev.
invalidate_inodes *does* discard I_DIRTY inodes and this does lead
to fs corruption.
invalidate_bev *does*not* discard dirty pages, but I don't really care
about that at present.
So this patch adds a flag to __invalidate_device (calling it
__invalidate_device2) to indicate whether dirty buffers should be
killed, and this is passed to invalidate_inodes which can choose to
skip dirty inodes.
flusk_disk then passes true from check_disk_change and false from
check_disk_size_change.
dm avoids tripping over this problem by calling i_size_write directly
rathher than using check_disk_size_change.
md does use check_disk_size_change and so is affected.
This regression was introduced by commit 608aeef17a which causes
check_disk_size_change to call flush_disk, so it is suitable for any
kernel since 2.6.27.
Cc: stable@kernel.org
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NeilBrown <neilb@suse.de>
Classify severity of I/O errors for target, nexus, and
transport errors.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Flush requests are never put on the IO scheduler. Convert request
structure's elevator_private* into an array and have the flush fields
share a union with it.
Reclaim the space lost in 'struct request' by moving 'completion_data'
back in the union with 'rb_node'.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Skip elevator initialization for flush requests by passing priv=0 to
blk_alloc_request() in get_request(). As such elv_set_request() is
never called for flush requests.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cdrom: support devices that have check_events but not media_changed
cfq-iosched: Don't wait if queue already has requests.
blkio-throttle: Avoid calling blkiocg_lookup_group() for root group
cfq: rename a function to give it more appropriate name
cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
drivers/block/aoe/Makefile: replace the use of <module>-objs with <module>-y
loop: queue_lock NULL pointer derefence in blk_throtl_exit
drivers/block/Makefile: replace the use of <module>-objs with <module>-y
blktrace: Don't output messages if NOTIFY isn't set.
Commit 7667aa0630 added logic to wait for
the last queue of the group to become busy (have at least one request),
so that the group does not lose out for not being continuously
backlogged. The commit did not check for the condition that the last
queue already has some requests. As a result, if the queue already has
requests, wait_busy is set. Later on, cfq_select_queue() checks the
flag, and decides that since the queue has a request now and wait_busy
is set, the queue is expired. This results in early expiration of the
queue.
This patch fixes the problem by adding a check to see if queue already
has requests. If it does, wait_busy is not set. As a result, time slices
do not expire early.
The queues with more than one request are usually buffered writers.
Testing shows improvement in isolation between buffered writers.
Cc: stable@kernel.org
Signed-off-by: Justin TerAvest <teravest@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The current FLUSH/FUA support has evolved from the implementation
which had to perform queue draining. As such, sequencing is done
queue-wide one flush request after another. However, with the
draining requirement gone, there's no reason to keep the queue-wide
sequential approach.
This patch reimplements FLUSH/FUA support such that each FLUSH/FUA
request is sequenced individually. The actual FLUSH execution is
double buffered and whenever a request wants to execute one for either
PRE or POSTFLUSH, it queues on the pending queue. Once certain
conditions are met, a flush request is issued and on its completion
all pending requests proceed to the next sequence.
This allows arbitrary merging of different type of flushes. How they
are merged can be primarily controlled and tuned by adjusting the
above said 'conditions' used to determine when to issue the next
flush.
This is inspired by Darrick's patches to merge multiple zero-data
flushes which helps workloads with highly concurrent fsync requests.
* As flush requests are never put on the IO scheduler, request fields
used for flush share space with rq->rb_node. rq->completion_data is
moved out of the union. This increases the request size by one
pointer.
As rq->elevator_private* are used only by the iosched too, it is
possible to reduce the request size further. However, to do that,
we need to modify request allocation path such that iosched data is
not allocated for flush requests.
* FLUSH/FUA processing happens on insertion now instead of dispatch.
- Comments updated as per Vivek and Mike.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
bio's for flush are completed twice - once during the data phase and
one more time after the whole sequence is complete. The first
completion shouldn't notify completion to the issuer.
This was achieved by skipping all bio completion steps in
req_bio_endio() for the first completion; however, this has two
drawbacks.
* Error is not recorded in bio and must be tracked somewhere else.
* Partial completion is not supported.
Both don't cause problems for the current users; however, they make
further improvements difficult. Change req_bio_endio() such that it
only skips the actual notification part for the first completion. bio
completion is implemented with partial completions on mind anyway so
this is as simple as moving the REQ_FLUSH_SEQ conditional such that
only calling of bio_endio() is skipped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
rq == &q->flush_rq was used to determine whether a rq is part of a
flush sequence, which worked because all requests in a flush sequence
were sequenced using the single dedicated request. This is about to
change, so introduce REQ_FLUSH_SEQ flag to distinguish flush sequence
requests.
This patch doesn't cause any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.
This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).
Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
o Jeff Moyer was doing some testing on a RAM backed disk and
blkiocg_lookup_group() showed up high overhead after memcpy(). Similarly
somebody else reported that blkiocg_lookup_group() is eating 6% extra
cpu. Though looking at the code I can't think why the overhead of
this function is so high. One thing is that it is called with very high
frequency (once for every IO).
o For lot of folks blkio controller will be compiled in but they might
not have actually created cgroups. Hence optimize the case of root
cgroup where we can avoid calling blkiocg_lookup_group() if IO is happening
in root group (common case).
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Rename a function to give it more approprate name. We are calculating
cfq queue slice and function name gives the impression as if cfq group
slice length is being calculated.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If a queue is preempted before it gets slice assigned, the queue doesn't get
compensation, which looks unfair. For such queue, we compensate it for a whole
slice.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
I got this:
fio-874 [007] 2157.724514: 8,32 m N cfq874 preempt
fio-874 [007] 2157.724519: 8,32 m N cfq830 slice expired t=1
fio-874 [007] 2157.724520: 8,32 m N cfq830 sl_used=1 disp=0 charge=1 iops=0 sect=0
fio-874 [007] 2157.724521: 8,32 m N cfq830 set_active wl_prio:0 wl_type:0
fio-874 [007] 2157.724522: 8,32 m N cfq830 Not idling. st->count:1
cfq830 is an async queue, and preempted by a sync queue cfq874. But since we
have cfqg->saved_workload_slice mechanism, the preempt is a nop.
Looks currently our preempt is totally broken if the two queues are not from
the same workload type.
Below patch fixes it. This will might make async queue starvation, but it's
what our old code does before cgroup is added.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
cfq_group->ref is used with queue_lock hold, the only exception is
cfq_set_request, which looks like a bug to me, so ref doesn't need
to be an atomic and atomic operation is slower.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
cfq_queue->ref is used with queue_lock hold, so ref doesn't need to be an atomic
and atomic operation is slower.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We can't use krefs since it's apparently restricted to very basic
reference counting.
This reverts commit e4a683c8.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
/proc/diskstats would display a strange output as follows.
$ cat /proc/diskstats |grep sda
8 0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089
8 1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691
~~~~~~~~~~
8 2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390
8 3 sda3 54 487 2188 92 0 0 0 0 0 88 92
8 4 sda4 4 0 8 0 0 0 0 0 0 0 0
8 5 sda5 81 2027 2130 138 0 0 0 0 0 87 137
Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is
merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE.
The detailed root cause is as follows.
Assuming that there are two partition, sda1 and sda2.
1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight
is 0 and sda2's one is 1.
| hd_struct->in_flight
---------------------------
sda1 | 0
sda2 | 1
---------------------------
2. A bio belongs to sda1 is issued and is merged into the request mentioned on
step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed
from sda2 region to sda1 region. However the two partition's
hd_struct->in_flight are not changed.
| hd_struct->in_flight
---------------------------
sda1 | 0
sda2 | 1
---------------------------
3. The request is finished and blk_account_io_done() is called. In this case,
sda2's hd_struct->in_flight, not a sda1's one, is decremented.
| hd_struct->in_flight
---------------------------
sda1 | -1
sda2 | 1
---------------------------
The patch fixes the problem by caching the partition lookup
inside the request structure, hence making sure that the increment
and decrement will always happen on the same partition struct. This
also speeds up IO with accounting enabled, since it cuts down on
the number of lookups we have to do.
Also add a refcount to struct hd_struct to keep the partition in
memory as long as users exist. We use kref_test_and_get() to ensure
we don't add a reference to a partition which is going away.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
kblockd is used for unplugging and may affect IO latency and
throughput and the max number of concurrent work items are bound by
the number of block devices. Make it HIGHPRI workqueue w/ default max
concurrency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
This patch fixes a spelling error in a source code comment and removes
superfluous braces in the function exit_io_context().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cciss: fix cciss_revalidate panic
block: max hardware sectors limit wrapper
block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
blk-throttle: Correct the placement of smp_rmb()
blk-throttle: Trim/adjust slice_end once a bio has been dispatched
block: check for proper length of iov entries earlier in blk_rq_map_user_iov()
drbd: fix for spin_lock_irqsave in endio callback
drbd: don't recvmsg with zero length
The major/minor device numbers are always defined and used as `unsigned'.
Signed-off-by: Yang Zhang <kthreadd@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When cfq_choose_cfqg() is called in select_queue(), there must be at least one
backlogged CFQ queue waiting for dispatching, hence there must be at least one
backlogged CFQ group on service tree. So we never call choose_service_tree()
with cfqg == NULL.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Implement blk_limits_max_hw_sectors() and make
blk_queue_max_hw_sectors() a wrapper around it.
DM needs this to avoid setting queue_limits' max_hw_sectors and
max_sectors directly. dm_set_device_limits() now leverages
blk_limits_max_hw_sectors() logic to establish the appropriate
max_hw_sectors minimum (PAGE_SIZE). Fixes issue where DM was
incorrectly setting max_sectors rather than max_hw_sectors (which
caused dm_merge_bvec()'s max_hw_sectors check to be ineffective).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When stacking devices, a request_queue is not always available. This
forced us to have a no_cluster flag in the queue_limits that could be
used as a carrier until the request_queue had been set up for a
metadevice.
There were several problems with that approach. First of all it was up
to the stacking device to remember to set queue flag after stacking had
completed. Also, the queue flag and the queue limits had to be kept in
sync at all times. We got that wrong, which could lead to us issuing
commands that went beyond the max scatterlist limit set by the driver.
The proper fix is to avoid having two flags for tracking the same thing.
We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the
block layer merging functions. The queue_limit 'no_cluster' is turned
into 'cluster' to avoid double negatives and to ease stacking.
Clustering defaults to being enabled as before. The queue flag logic is
removed from the stacking function, and explicitly setting the cluster
flag is no longer necessary in DM and MD.
Reported-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently, media presence polling for removeable block devices is done
from userland. There are several issues with this.
* Polling is done by periodically opening the device. For SCSI
devices, the command sequence generated by such action involves a
few different commands including TEST_UNIT_READY. This behavior,
while perfectly legal, is different from Windows which only issues
single command, GET_EVENT_STATUS_NOTIFICATION. Unfortunately, some
ATAPI devices lock up after being periodically queried such command
sequences.
* There is no reliable and unintrusive way for a userland program to
tell whether the target device is safe for media presence polling.
For example, polling for media presence during an on-going burning
session can make it fail. The polling program can avoid this by
opening the device with O_EXCL but then it risks making a valid
exclusive user of the device fail w/ -EBUSY.
* Userland polling is unnecessarily heavy and in-kernel implementation
is lighter and better coordinated (workqueue, timer slack).
This patch implements framework for in-kernel disk event handling,
which includes media presence polling.
* bdops->check_events() is added, which supercedes ->media_changed().
It should check whether there's any pending event and return if so.
Currently, two events are defined - DISK_EVENT_MEDIA_CHANGE and
DISK_EVENT_EJECT_REQUEST. ->check_events() is guaranteed not to be
called parallelly.
* gendisk->events and ->async_events are added. These should be
initialized by block driver before passing the device to add_disk().
The former contains the mask of all supported events and the latter
the mask of all events which the device can report without polling.
/sys/block/*/events[_async] export these to userland.
* Kernel parameter block.events_dfl_poll_msecs controls the system
polling interval (default is 0 which means disable) and
/sys/block/*/events_poll_msecs control polling intervals for
individual devices (default is -1 meaning use system setting). Note
that if a device can report all supported events asynchronously and
its polling interval isn't explicitly set, the device won't be
polled regardless of the system polling interval.
* If a device is opened exclusively with write access, event checking
is automatically disabled until all write exclusive accesses are
released.
* There are event 'clearing' events. For example, both of currently
defined events are cleared after the device has been successfully
opened. This information is passed to ->check_events() callback
using @clearing argument as a hint.
* Event checking is always performed from system_nrt_wq and timer
slack is set to 25% for polling.
* Nothing changes for drivers which implement ->media_changed() but
not ->check_events(). Going forward, all drivers will be converted
to ->check_events() and ->media_change() will be dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There's no reason for register_disk() and del_gendisk() to be in
fs/partitions/check.c. Move both to genhd.c. While at it, collapse
unlink_gendisk(), which was artificially in a separate function due to
genhd.c / check.c split, into del_gendisk().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If priority is changed, continuing to check workload_expires and service tree
count of the previous workload does not make sense. We should always choose
the workload with lowest key of new priority in such case.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This patch corrects an issue in bsg that results in a general protection
fault if an LLD is removed while an application is using an open file
handle to a bsg device, and the application issues an ioctl. The fault
occurs because the class_dev is NULL, having been cleared in
bsg_unregister_queue() when the driver was removed. With this
patch, a check is made for the class_dev, and the application
will receive ENXIO if the related object is gone.
Signed-off-by: Carl Lajeunesse <carl.lajeunesse@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
o I was discussing what are the variable being updated without spin lock and
why do we need barriers and Oleg pointed out that location of smp_rmb()
should be between read of td->limits_changed and tg->limits_changed. This
patch fixes it.
o Following is one possible sequence of events. Say cpu0 is executing
throtl_update_blkio_group_read_bps() and cpu1 is executing
throtl_process_limit_change().
cpu0 cpu1
tg->limits_changed = true;
smp_mb__before_atomic_inc();
atomic_inc(&td->limits_changed);
if (!atomic_read(&td->limits_changed))
return;
if (tg->limits_changed)
do_something;
If cpu0 has updated tg->limits_changed and td->limits_changed, we want to
make sure that if update to td->limits_changed is visible on cpu1, then
update to tg->limits_changed should also be visible.
Oleg pointed out to ensure that we need to insert an smp_rmb() between
td->limits_changed read and tg->limits_changed read.
o I had erroneously put smp_rmb() before atomic_read(&td->limits_changed).
This patch fixes it.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o During some testing I did following and noticed throttling stops working.
- Put a very low limit on a cgroup, say 1 byte per second.
- Start some reads, this will set slice_end to a very high value.
- Change the limit to higher value say 1MB/s
- Now IO unthrottles and finishes as expected.
- Try to do the read again but IO is not limited to 1MB/s as expected.
o What is happening.
- Initially low value of limit sets slice_end to a very high value.
- During updation of limit, slice_end is not being truncated.
- Very high value of slice_end leads to keeping the existing slice
valid for a very long time and new slice does not start.
- tg_may_dispatch() is called in blk_throtle_bio(), and trim_slice()
is not called in this path. So slice_start is some old value and
practically we are able to do huge amount of IO.
o There are many ways it can be fixed. I have fixed it by trying to
adjust/cleanup slice_end in trim_slice(). Generally we extend slices if bio
is big and can't be dispatched in one slice. After dispatch of bio, readjust
the slice_end to make sure we don't end up with huge values.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It's able to check whether a CFQ group on a service tree by
checking "cfqg->rb_node". There's no need to maintain an
extra flag here.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When a cfq group is running, it won't be dequeued from service tree, so
there's no need to store the active one in st->active. Just gid rid of it.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
commit 9284bcf checks for proper length of iov entries in
blk_rq_map_user_iov(). But if the map is unaligned, kernel
will break out the loop without checking for the proper length.
So we need to check the proper length before the unalign check.
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cciss: fix build for PROC_FS disabled
block: fix amiga and atari floppy driver compile warning
blk-throttle: Fix calculation of max number of WRITES to be dispatched
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()
xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests
xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER
xen/blkfront: change blk_shadow.request to proper pointer
xen/blkfront: map REQ_FLUSH into a full barrier
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
o Allow hierarchical cgroup creation for blkio controller
o Currently we disallow it as both the io controller policies (throttling
as well as proportion bandwidth) do not support hierarhical accounting
and control. But the flip side is that blkio controller can not be used with
libvirt as libvirt creates a cgroup hierarchy deeper than 1 level.
<top-level-cgroup-dir>/<controller>/libvirt/qemu/<virtual-machine-groups>
o So this patch will allow creation of cgroup hierarhcy but at the backend
everything will be treated as flat. So if somebody created a an hierarchy
like as follows.
root
/ \
test1 test2
|
test3
CFQ and throttling will practically treat all groups at same level.
pivot
/ | \ \
root test1 test2 test3
o Once we have actual support for hierarchical accounting and control
then we can introduce another cgroup tunable file "blkio.use_hierarchy"
which will be 0 by default but if user wants to enforce hierarhical
control then it can be set to 1. This way there should not be any
ABI problems down the line.
o The only not so pretty part is introduction of extra file "use_hierarchy"
down the line. Kame-san had mentioned that hierarhical accounting is
expensive in memory controller hence they keep it off by default. I
suspect same will be the case for IO controller also as for each IO
completion we shall have to account IO through hierarchy up to the root.
if yes, then it probably is not a very bad idea to introduce this extra
file so that it will be used only when somebody needs it and some people
might enable hierarchy only in part of the hierarchy.
o This is how basically memory controller also uses "use_hierarhcy" and
they also allowed creation of hierarchies when actual backend support
was not available.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Tested-by: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Currently we try to dispatch more READS and less WRITES (75%, 25%) in one
dispatch round. ummy pointed out that there is a bug in max_nr_writes
calculation. This patch fixes it.
Reported-by: ummy y <yummylln@yahoo.com.cn>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.
* blkdev_get/put() are the primary open and close functions.
* bd_claim/release() deal with exclusive open.
* open/close_bdev_exclusive() are combination of open and claim and
the other way around, respectively.
* bd_link/unlink_disk_holder() to create and remove holder/slave
symlinks.
* open_by_devnum() wraps bdget() + blkdev_get().
The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access. Reorganize the interface such that,
* blkdev_get() is extended to include exclusive access management.
@holder argument is added and, if is @FMODE_EXCL specified, it will
gain exclusive access atomically w.r.t. other exclusive accesses.
* blkdev_put() is similarly extended. It now takes @mode argument and
if @FMODE_EXCL is set, it releases an exclusive access. Also, when
the last exclusive claim is released, the holder/slave symlinks are
removed automatically.
* bd_claim/release() and close_bdev_exclusive() are no longer
necessary and either made static or removed.
* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
is no longer necessary and removed.
* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
and blkdev_get(). It also has an unexpected extra bdev_read_only()
test which probably should be moved into blkdev_get().
* open_by_devnum() is modified to take @holder argument and pass it to
blkdev_get().
Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should). This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.
open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features. Well, let's leave them for another day.
Most conversions are straight-forward. drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
REQ_HARDBARRIER is dead now, so remove the leftovers. What's left
at this point is:
- various checks inside the block layer.
- sanity checks in bio based drivers.
- now unused bio_empty_barrier helper.
- Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
but Xen really needs to sort out it's barrier situaton.
- setting of ordered tags in uas - dead code copied from old scsi
drivers.
- scsi different retry for barriers - it's dead and should have been
removed when flushes were converted to FS requests.
- blktrace handling of barriers - removed. Someone who knows blktrace
better should add support for REQ_FLUSH and REQ_FUA, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Structure hd_geometry is copied to userland with 4 padding bytes
between cylinders and start fields uninitialized on 64-bit platforms.
It leads to leaking of contents of kernel stack memory.
Currently there is no memset() in real implementations of getgeo()
in drivers/block/, so it makes sense to have memset() in blkdev_ioctl().
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Convert direct reads of an inode's i_size to using i_size_read().
i_size_{read,write} use a seqcount to protect reads from accessing
incomple writes. Concurrent i_size_write()s require mutual exclussion
to protect the seqcount that is used by i_size_{read,write}. But
i_size_read() callers do not need to use additional locking.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Ensure that we pass down properly validated iov segments before
calling into the mapping or copy functions.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Vivek suggests we don't need schedule a dispatch when an idle queue
becomes nonidle. And he is right, cfq_should_preempt already covers
the logic.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If a deep seek queue slowly deliver requests but disk is much faster, idle
for the queue just wastes disk throughput. If the queue delevers all requests
before half its slice is used, the patch disable idle for it.
In my test, application delivers 32 requests one time, the disk can accept
128 requests at maxium and disk is fast. without the patch, the throughput
is just around 30m/s, while with it, the speed is about 80m/s. The disk is
a SSD, but is detected as a rotational disk. I can configure it as SSD, but
I thought the deep seek queue logic should be fixed too, for example,
considering a fast raid.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
A queue is idle at cfq_dispatch_requests(), but it gets noidle later. Unless
other task explictly does unplug or all requests are drained, we will not
deliever requests to the disk even cfq_arm_slice_timer doesn't make the
queue idle. For example, cfq_should_idle() returns true because of
service_tree->count == 1, and then other queues are added. Note, I didn't
see obvious performance impacts so far with the patch, but just thought
this could be a problem.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This reverts commit 7681bfeecc.
Conflicts:
include/linux/genhd.h
It has numerous issues with the cleanup path and non-elevator
devices. Revert it for now so we can come up with a clean
version without rushing things.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
blk_throtl_exit() frees the throttle data hanging off the queue
in blk_cleanup_queue(), but blk_put_queue() will indirectly
dereference this data when calling blk_sync_queue() which in
turns calls throtl_shutdown_timer_wq().
Fix this by moving the freeing of the throttle data to when
the queue is truly being released, and post the call to
blk_sync_queue().
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
driver core: Display error codes when class suspend fails
Driver core: Add section count to memory_block struct
Driver core: Add mutex for adding/removing memory blocks
Driver core: Move find_memory_block routine
hpilo: Despecificate driver from iLO generation
driver core: Convert link_mem_sections to use find_memory_block_hinted.
driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
kobject: Introduce kset_find_obj_hinted.
driver core: fix build for CONFIG_BLOCK not enabled
driver-core: base: change to new flag variable
sysfs: only access bin file vm_ops with the active lock
sysfs: Fail bin file mmap if vma close is implemented.
FW_LOADER: fix kconfig dependency warning on HOTPLUG
uio: Statically allocate uio_class and use class .dev_attrs.
uio: Support 2^MINOR_BITS minors
uio: Cleanup irq handling.
uio: Don't clear driver data
uio: Fix lack of locking in init_uio_class
SYSFS: Allow boot time switching between deprecated and modern sysfs layout
driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
...
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
xen-blkfront: disable barrier/flush write support
Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
block: remove BLKDEV_IFL_WAIT
aic7xxx_old: removed unused 'req' variable
block: remove the BH_Eopnotsupp flag
block: remove the BLKDEV_IFL_BARRIER flag
block: remove the WRITE_BARRIER flag
swap: do not send discards as barriers
fat: do not send discards as barriers
ext4: do not send discards as barriers
jbd2: replace barriers with explicit flush / FUA usage
jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
jbd: replace barriers with explicit flush / FUA usage
nilfs2: replace barriers with explicit flush / FUA usage
reiserfs: replace barriers with explicit flush / FUA usage
gfs2: replace barriers with explicit flush / FUA usage
btrfs: replace barriers with explicit flush / FUA usage
xfs: replace barriers with explicit flush / FUA usage
block: pass gfp_mask and flags to sb_issue_discard
dm: convey that all flushes are processed as empty
...
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
cfq-iosched: Fix a gcc 4.5 warning and put some comments
block: Turn bvec_k{un,}map_irq() into static inline functions
block: fix accounting bug on cross partition merges
block: Make the integrity mapped property a bio flag
block: Fix double free in blk_integrity_unregister
block: Ensure physical block size is unsigned int
blkio-throttle: Fix possible multiplication overflow in iops calculations
blkio-throttle: limit max iops value to UINT_MAX
blkio-throttle: There is no need to convert jiffies to milli seconds
blkio-throttle: Fix link failure failure on i386
blkio: Recalculate the throttled bio dispatch time upon throttle limit change
blkio: Add root group to td->tg_list
blkio: deletion of a cgroup was causes oops
blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: revert bad fix for memory hotplug causing bounces
Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: Prevent hang_check firing during long I/O
cfq: improve fsync performance for small files
...
Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
block: autoconvert trivial BKL users to private mutex
drivers: autoconvert trivial BKL users to private mutex
ipmi: autoconvert trivial BKL users to private mutex
mac: autoconvert trivial BKL users to private mutex
mtd: autoconvert trivial BKL users to private mutex
scsi: autoconvert trivial BKL users to private mutex
Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
I have some systems which need legacy sysfs due to old tools that are
making assumptions that a directory can never be a symlink to another
directory, and it's a big hazzle to compile separate kernels for them.
This patch turns CONFIG_SYSFS_DEPRECATED into a run time option
that can be switched on/off the kernel command line. This way
the same binary can be used in both cases with just a option
on the command line.
The old CONFIG_SYSFS_DEPRECATED_V2 option is still there to set
the default. I kept the weird name to not break existing
config files.
Also the compat code can be still completely disabled by undefining
CONFIG_SYSFS_DEPRECATED_SWITCH -- just the optimizer takes
care of this now instead of lots of ifdefs. This makes the code
look nicer.
v2: This is an updated version on top of Kay's patch to only
handle the block devices. I tested it on my old systems
and that seems to work.
Cc: axboe@kernel.dk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Andi encountedred following warning with gcc 4.5
linux/block/cfq-iosched.c: In function ‘cfq_dispatch_requests’:
linux/block/cfq-iosched.c:2156:3: warning: array subscript is above array
bounds
- Warning happens due to following code.
slice = group_slice * count /
max_t(unsigned, cfqg->busy_queues_avg[cfqd->serving_prio],
cfq_group_busy_queues_wl(cfqd->serving_prio, cfqd, cfqg));
gcc is complaining about cfqg->busy_queues_avg[] being indexed by CFQ
prio classes (RT, BE and IDLE) while the array size is only 2.
- At run time, we never access cfqg->busy_queues_avg[IDLE] and return from
function before this code hits.
- To fix warning increase the array size though it will remain unused. This
patch also puts some comments to clarify some of the confusions.
- I have taken Jens's patch and modified it a bit.
- Compile tested with gcc 4.4 and boot tested. I don't have gcc 4.5
running, Andi can you please test it with gcc 4.5 to make sure it
worked.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
/proc/diskstats would display a strange output as follows.
$ cat /proc/diskstats |grep sda
8 0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089
8 1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691
~~~~~~~~~~
8 2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390
8 3 sda3 54 487 2188 92 0 0 0 0 0 88 92
8 4 sda4 4 0 8 0 0 0 0 0 0 0 0
8 5 sda5 81 2027 2130 138 0 0 0 0 0 87 137
Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is
merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE.
The detailed root cause is as follows.
Assuming that there are two partition, sda1 and sda2.
1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight
is 0 and sda2's one is 1.
| hd_struct->in_flight
---------------------------
sda1 | 0
sda2 | 1
---------------------------
2. A bio belongs to sda1 is issued and is merged into the request mentioned on
step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed
from sda2 region to sda1 region. However the two partition's
hd_struct->in_flight are not changed.
| hd_struct->in_flight
---------------------------
sda1 | 0
sda2 | 1
---------------------------
3. The request is finished and blk_account_io_done() is called. In this case,
sda2's hd_struct->in_flight, not a sda1's one, is decremented.
| hd_struct->in_flight
---------------------------
sda1 | -1
sda2 | 1
---------------------------
The patch fixes the problem by caching the partition lookup
inside the request structure, hence making sure that the increment
and decrement will always happen on the same partition struct. This
also speeds up IO with accounting enabled, since it cuts down on
the number of lookups we have to do.
When reloading partition tables, quiesce IO to ensure that no
request references to the partition struct exists. When it is safe
to free the partition table, the IO for that device is restarted
again.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
bsg incorrectly returns sg's masked_status value for device_status.
[jejb: fix up expression logic]
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Commit 3839e4b introduced a kobject_put but failed to remove the
kmem_cache_free beneath it, leading to a double free.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Physical block size was declared unsigned int to accomodate the maximum
size reported by READ CAPACITY(16). Make sure we use the right type in
the related functions.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2.6.36 introduces an API for drivers to switch the IO scheduler
instead of manually calling the elevator exit and init functions.
This API was added since q->elevator must be cleared in between
those two calls. And since we already have this functionality
directly from use by the sysfs interface to switch schedulers
online, it was prudent to reuse it internally too.
But this API needs the queue to be in a fully initialized state
before it is called, or it will attempt to unregister elevator
kobjects before they have been added. This results in an oops
like this:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000051
IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
PGD 47ddfc067 PUD 47c6a1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq
CPU 2
Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb
Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R
RIP: 0010:[<ffffffff8116f15e>] [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
RSP: 0018:ffff88027da25d08 EFLAGS: 00010246
RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000
RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88
RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0
R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528
FS: 00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090)
Stack:
ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88
<0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77
<0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528
Call Trace:
[<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0
[<ffffffff8123fd98>] kobject_add_varg+0x38/0x60
[<ffffffff8123feb9>] kobject_add+0x69/0x90
[<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
[<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0
[<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50
[<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
[<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0
[<ffffffff81224204>] elv_register_queue+0x34/0xa0
[<ffffffff81224aad>] elevator_change+0xfd/0x250
[<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
[<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
[<ffffffffa007e0a8>] t_init+0xa8/0x361 [t]
[<ffffffff810001de>] do_one_initcall+0x3e/0x170
[<ffffffff8108c3fd>] sys_init_module+0xbd/0x220
[<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b
Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6
RIP [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
RSP <ffff88027da25d08>
CR2: 0000000000000051
---[ end trace a6541d3bf07945df ]---
Fix this by adding a registered bit to the elevator queue, which is
set when the sysfs kobjects have been registered.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The block device drivers have all gained new lock_kernel
calls from a recent pushdown, and some of the drivers
were already using the BKL before.
This turns the BKL into a set of per-driver mutexes.
Still need to check whether this is safe to do.
file=$1
name=$2
if grep -q lock_kernel ${file} ; then
if grep -q 'include.*linux.mutex.h' ${file} ; then
sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
else
sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
fi
sed -i ${file} \
-e "/^#include.*linux.mutex.h/,$ {
1,/^\(static\|int\|long\)/ {
/^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
} }" \
-e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
-e '/[ ]*cycle_kernel_lock();/d'
else
sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \
-e '/cycle_kernel_lock()/d'
fi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
o User can specify max iops value of 32bit (UINT_MAX), through cgroup
interface. If a user has specified say 4294967294 (UNIT_MAX - 2), then
on 32bit platform, following multiplication can overflow.
io_allowed = (tg->iops[rw] * jiffy_elapsed_rnd)
o Explicitly cast the multiplication to 64bit and then perform division and
then check whether result is still great then UNINT_MAX.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
- Limit max iops value to UINT_MAX and return error to user if value is more
than that instead of accepting bigger values and truncating implicitly.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Do not convert jiffies to mili seconds as it is not required. Just work
with jiffies and HZ.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Randy Dunlap reported following linux-next failure. This patch fixes it.
on i386:
blk-throttle.c:(.text+0x1abb8): undefined reference to `__udivdi3'
blk-throttle.c:(.text+0x1b1dc): undefined reference to `__udivdi3'
o bytes_per_second interface is 64bit and I was continuing to do 64 bit
division even on 32bit platform without help of special macros/functions
hence the failure.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Currently any cgroup throttle limit changes are processed asynchronousy and
the change does not take affect till a new bio is dispatched from same group.
o It might happen that a user sets a redicuously low limit on throttling.
Say 1 bytes per second on reads. In such cases simple operations like mount
a disk can wait for a very long time.
o Once bio is throttled, there is no easy way to come out of that wait even if
user increases the read limit later.
o This patch fixes it. Now if a user changes the cgroup limits, we recalculate
the bio dispatch time according to new limits.
o Can't take queueu lock under blkcg_lock, hence after the change I wake
up the dispatch thread again which recalculates the time. So there are some
variables being synchronized across two threads without lock and I had to
make use of barriers. Hoping I have used barriers correctly. Any review of
memory barrier code especially will help.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Currently all the dynamically allocated groups, except root grp is added
to td->tg_list. This was not a problem so far but in next patch I will
travel through td->tg_list to process any updates of limits on the group.
If root group is not in tg_list, then root group's updates are not
processed.
o It is better to root group also to tg_list instead of doing special
processing for it during limit updates.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Now a cgroup list of blkg elements can contain blkg from multiple policies.
Before sending an unlink event, make sure blkg belongs to they policy. If
policy does not own the blkg, do not send update for this blkg.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently throttling related files were visible even if user had disabled
throttling using config options. It was switching off background throttling
of bio but not the cgroup files. This patch fixes it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The bounce_pfn of the request queue in 64 bit systems is set to the
current max_low_pfn. Adding more memory later makes this incorrect.
Memory allocated beyond this boot time max_low_pfn appear to require
bounce buffers (bounce buffers are actually not allocated but used in
calculating segments that may result in "over max segments limit"
errors).
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Revert "block: set the bounce_pfn to the actual DMA limit rather than to max memory"
This reverts commit c49825facf.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Add logic to prevent two I/O requests being merged if
only one of them is a discard. Ditto secure discard.
Without this fix, it is possible for write requests
to transform into discard requests. For example:
Submit bio 1 to discard 8 sectors from sector n
Submit bio 2 to write 8 sectors from sector n + 16
Submit bio 3 to write 8 sectors from sector n + 8
Bio 1 becomes request 1. Bio 2 becomes request 2.
Bio 3 is merged with request 2, and then subsequently
request 2 is merged with request 1 resulting in just
one I/O request which discards all 24 sectors.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
(Moved the checks above the position checks /Jens)
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The bounce_pfn of the request queue in 64 bit systems is set to the
current max_low_pfn. Adding more memory later makes this incorrect.
Memory allocated beyond this boot time max_low_pfn appear to require
bounce buffers (bounce buffers are actually not allocated but used in
calculating segments that may result in "over max segments limit"
errors).
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
During long I/O operations, the hang_check timer may fire,
trigger stack dumps that unnecessarily alarm the user.
Eg. hdparm --security-erase NULL /dev/sdb ## can take *hours* to complete
So, if hang_check is armed, we should wake up periodically
to prevent it from triggering. This patch uses a wake-up interval
equal to half the hang_check timer period, which keeps overhead low enough.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Mike reported a kernel crash when a usb key hotplug is performed while all
kernel thrads are not in a root cgroup and are running in one of the child
cgroups of blkio controller.
BUG: unable to handle kernel NULL pointer dereference at 0000002c
IP: [<c11c7b08>] cfq_get_queue+0x232/0x412
*pde = 00000000
Oops: 0000 [#1] PREEMPT
last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/host3/scsi_host/host3/uevent
[..]
Pid: 30039, comm: scsi_scan_3 Not tainted 2.6.35.2-fg.roam #1 Volvi2 /Aspire 4315
EIP: 0060:[<c11c7b08>] EFLAGS: 00010086 CPU: 0
EIP is at cfq_get_queue+0x232/0x412
EAX: f705f9c0 EBX: e977abac ECX: 00000000 EDX: 00000000
ESI: f00da400 EDI: f00da4ec EBP: e977a800 ESP: dff8fd00
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process scsi_scan_3 (pid: 30039, ti=dff8e000 task=f6b6c9a0 task.ti=dff8e000)
Stack:
00000000 00000000 00000001 01ff0000 f00da508 00000000 f00da524 f00da540
<0> e7994940 dd631750 f705f9c0 e977a820 e977ac44 f00da4d0 00000001 f6b6c9a0
<0> 00000010 00008010 0000000b 00000000 00000001 e977a800 dd76fac0 00000246
Call Trace:
[<c11c7f10>] ? cfq_set_request+0x228/0x34c
[<c11c7ce8>] ? cfq_set_request+0x0/0x34c
[<c11bb3b9>] ? elv_set_request+0xf/0x1c
[<c11bdd51>] ? get_request+0x1ad/0x22f
[<c11bddf2>] ? get_request_wait+0x1f/0x11a
[<c11d013b>] ? kvasprintf+0x33/0x3b
[<c127b537>] ? scsi_execute+0x1d/0x103
[<c127b675>] ? scsi_execute_req+0x58/0x83
[<c127c391>] ? scsi_probe_and_add_lun+0x188/0x7c2
[<c12718c6>] ? attribute_container_add_device+0x15/0xfa
[<c11c95d1>] ? kobject_get+0xf/0x13
[<c126d1db>] ? get_device+0x10/0x14
[<c127be93>] ? scsi_alloc_target+0x217/0x24d
[<c127cbd8>] ? __scsi_scan_target+0x95/0x480
[<c10204eb>] ? dequeue_entity+0x14/0x1fe
[<c1020491>] ? update_curr+0x165/0x1ab
[<c1020491>] ? update_curr+0x165/0x1ab
[<c127d00d>] ? scsi_scan_channel+0x4a/0x76
[<c127d0b0>] ? scsi_scan_host_selected+0x77/0xad
[<c127d13c>] ? do_scan_async+0x0/0x11a
[<c127d137>] ? do_scsi_scan_host+0x51/0x56
[<c127d13c>] ? do_scan_async+0x0/0x11a
[<c127d14a>] ? do_scan_async+0xe/0x11a
[<c127d13c>] ? do_scan_async+0x0/0x11a
[<c10354c5>] ? kthread+0x5e/0x63
[<c1035467>] ? kthread+0x0/0x63
[<c1002af6>] ? kernel_thread_helper+0x6/0x10
Code: 44 24 1c 54 83 44 24 18 54 83 fa 03 75 94 8b 06 c7 86 64 02 00 00 01 00 00 00 83 e0 03 09 f0 89 06 8b 44 24 28 8b 90 58 01 00 00 <8b> 42 2c 85 c0 75 03 8b 42 08 8d 54 24 48 52 8d 4c 24 50 51 68
EIP: [<c11c7b08>] cfq_get_queue+0x232/0x412 SS:ESP 0068:dff8fd00
CR2: 000000000000002c
---[ end trace 9a88306573f69b12 ]---
The problem here is that we don't have bdi->dev information available when
thread does some IO. Hence when dev_name() tries to access bdi->dev, it
crashes.
This problem does not happen if kernel threads are in root group as root
group is statically allocated at device initialization time and we don't
hit this piece of code.
Fix it by delaying the filling of major and minor number information of
device in blk_group. Initially a blk_group is created with 0 as device
information and this information is filled later once some more IO comes
in from same group.
Reported-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This bug was introduced in 7b6d91daee
"block: unify flags for struct bio and struct request"
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.
Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.
This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
tree.
Having the queue associated to the fsync-ing process and the one associated
to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
after the noidle tree expires its slice.
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When a new disk is being discovered, add_disk() first ties the bdev to gendisk
(via register_disk()->blkdev_get()) and only after that calls
bdi_register_bdev(). Because register_disk() also creates disk's kobject, it
can happen that userspace manages to open and modify the device's data (or
inode) before its BDI is properly initialized leading to a warning in
__mark_inode_dirty().
Fix the problem by registering BDI early enough.
This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=16312
Cc: stable@kernel.org
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Actual implementation of throttling policy in block layer. Currently it
implements READ and WRITE bytes per second throttling logic. IOPS throttling
comes in later patches.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o cgroup chagnes for throttle policy.
o Introduces READ and WRITE bytes per second throttling rules.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o This patch prepares the base for introducing new IO control policies.
Currently all the code is written knowing there is only one policy
and that is proportional bandwidth. Creating infrastructure for newer
policies to come in.
o Also there were many functions which were generated using macro. It was
very confusing. Got rid of those.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Kill extra "dev weight" header which is printed when somebody reads
blkio.weight_device file. This really seems to be out of convention. No other
blkio files are printing any header at the start of file. I think it is ok
to just print values and how to interpret values should be part of
documentation.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This is the third patch in a series which adds support for
storing partition metadata, optionally, off of the hd_struct.
One major use for that data is being able to resolve partition
by other identities than just the index on a block device. Device
enumeration varies by platform and there's a benefit to being able
to use something like EFI GPT's GUIDs to determine the correct
block device and partition to mount as the root.
This change adds that support to root= by adding support for
the following syntax:
root=PARTUUID=hex-uuid
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
I'm reposting this patch series as v4 since there have been no additional
comments, and I cleaned up one extra bit of unneeded code (in 3/3). The patches
are against Linus's tree: 2bfc96a127
(2.6.36-rc3).
Would this patchset be suitable for inclusion in an mm branch?
This changes adds a partition_meta_info struct which itself contains a
union of structures that provide partition table specific metadata.
This change leaves the union empty. The subsequent patch includes an
implementation for CONFIG_EFI_PARTITION-based metadata.
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Change type of 2nd parameter of blk_rq_aligned() into unsigned long
and remove unnecessary casting. Now we can call it with 'uaddr'
instead of 'ubuf' in __blk_rq_map_user() so that it can remove
following warnings from sparse:
block/blk-map.c:57:31: warning: incorrect type in argument 2 (different address spaces)
block/blk-map.c:57:31: expected void *addr
block/blk-map.c:57:31: got void [noderef] <asn:1>*ubuf
However blk_rq_map_kern() needs one more local variable to handle it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Some controllers have a hardware limit on the number of protection
information scatter-gather list segments they can handle.
Introduce a max_integrity_segments limit in the block layer and provide
a new scsi_host_template setting that allows HBA drivers to provide a
value suitable for the hardware.
Add support for honoring the integrity segment limit when merging both
bios and requests.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
We have several users of min_not_zero, each of them using their own
definition. Move the define to kernel.h.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
Remove support for barriers on discards, which is unused now. Also
remove the DISCARD_NOBARRIER I/O type in favour of just setting the
rw flags up locally in blkdev_issue_discard.
tj: Also remove DISCARD_SECURE and use REQ_SECURE directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently __blk_rq_prep_clone() copies only REQ_WRITE and REQ_DISCARD.
There's no reason to omit other command flags and REQ_FUA needs to be
copied to implement FUA support in request-based dm.
REQ_COMMON_MASK which specifies flags to be copied from bio to request
already identifies all the command flags. Define REQ_CLONE_MASK to be
the same as REQ_COMMON_MASK for clarity and make __blk_rq_prep_clone()
copy all flags in the mask.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Update blkdev_issue_flush() to use new REQ_FLUSH interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
rq->rq_disk and bio->bi_bdev->bd_disk may differ if a request has
passed through remapping drivers. FSEQ_DATA request incorrectly
followed bio->bi_bdev->bd_disk ending up being issued w/ mismatching
rq_disk. Make it follow orig_rq->rq_disk.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Tested-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
While completing a request from a REQ_FLUSH/FUA sequence, another
request can be pushed to the request queue. If a driver tests
elv_queue_empty() before completing a request and runs the queue again
only if the queue wasn't empty, this may lead to hang. Please note
that most drivers either kick the queue unconditionally or test queue
emptiness after completing the current request and don't have this
problem.
This patch removes this possibility by making REQ_FLUSH/FUA sequence
code kick the queue if the queue was empty before completing a request
from REQ_FLUSH/FUA sequence.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
init_flush_request() only set REQ_FLUSH when initializing flush
requests making them READ requests. Use WRITE_FLUSH instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We need to call blk_rq_init and elv_insert for all cases in queue_next_fseq,
so take these calls into common code. Also move the end_io initialization
from queue_flush into queue_next_fseq and rename queue_flush to
init_flush_request now that it's old name doesn't apply anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There are a number of make_request based drivers which don't support
cache flushes. Filter out flush bio's in __generic_make_request() so
that they don't have to worry about them. All FLUSH/FUA requests with
data are converted to regular IO requests and empty ones are completed
immediately.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Now that the backend conversion is complete, export sequenced
FLUSH/FUA capability through REQ_FLUSH/FUA flags. REQ_FLUSH means the
device cache should be flushed before executing the request. REQ_FUA
means that the data in the request should be on non-volatile media on
completion.
Block layer will choose the correct way of implementing the semantics
and execute it. The request may be passed to the device directly if
the device can handle it; otherwise, it will be sequenced using one or
more proxy requests. Devices will never see REQ_FLUSH and/or FUA
which it doesn't support.
Also, unlike the original REQ_HARDBARRIER, REQ_FLUSH/FUA requests are
never failed with -EOPNOTSUPP. If the underlying device doesn't
support FLUSH/FUA, the block layer simply make those noop. IOW, it no
longer distinguishes between writeback cache which doesn't support
cache flush and writethrough/no cache. Devices which have WB cache
w/o flush are very difficult to come by these days and there's nothing
much we can do anyway, so it doesn't make sense to require everyone to
implement -EOPNOTSUPP handling. This will simplify filesystems and
block drivers as they can drop -EOPNOTSUPP retry logic for barriers.
* QUEUE_ORDERED_* are removed and QUEUE_FSEQ_* are moved into
blk-flush.c.
* REQ_FLUSH w/o data can also be directly passed to drivers without
sequencing but some drivers assume that zero length requests don't
have rq->bio which isn't true for these requests requiring the use
of proxy requests.
* REQ_COMMON_MASK now includes REQ_FLUSH | REQ_FUA so that they are
copied from bio to request.
* WRITE_BARRIER is marked deprecated and WRITE_FLUSH, WRITE_FUA and
WRITE_FLUSH_FUA are added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
With ordering requirements dropped, barrier and ordered are misnomers.
Now all block layer does is sequencing FLUSH and FUA. Rename them to
flush.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Without ordering requirements, barrier and ordering are minomers.
Rename block/blk-barrier.c to block/blk-flush.c. Rename of symbols
will follow.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Filesystems will take all the responsibilities for ordering requests
around commit writes and will only indicate how the commit writes
themselves should be handled by block layers. This patch drops
barrier ordering by queue draining from block layer. Ordering by
draining implementation was somewhat invasive to request handling.
List of notable changes follow.
* Each queue has 1 bit color which is flipped on each barrier issue.
This is used to track whether a given request is issued before the
current barrier or not. REQ_ORDERED_COLOR flag and coloring
implementation in __elv_add_request() are removed.
* Requests which shouldn't be processed yet for draining were stalled
by returning -EAGAIN from blk_do_ordered() according to the test
result between blk_ordered_req_seq() and blk_blk_ordered_cur_seq().
This logic is removed.
* Draining completion logic in elv_completed_request() removed.
* All barrier sequence requests were queued to request queue and then
trckled to lower layer according to progress and thus maintaining
request orders during requeue was necessary. This is replaced by
queueing the next request in the barrier sequence only after the
current one is complete from blk_ordered_complete_seq(), which
removes the need for multiple proxy requests in struct request_queue
and the request sorting logic in the ELEVATOR_INSERT_REQUEUE path of
elv_insert().
* As barriers no longer have ordering constraints, there's no need to
dump the whole elevator onto the dispatch queue on each barrier.
Insert barriers at the front instead.
* If other barrier requests come to the front of the dispatch queue
while one is already in progress, they are stored in
q->pending_barriers and restored to dispatch queue one-by-one after
each barrier completion from blk_ordered_complete_seq().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Make the following cleanups in preparation of barrier/flush update.
* blk_do_ordered() declaration is moved from include/linux/blkdev.h to
block/blk.h.
* blk_do_ordered() now returns pointer to struct request, with %NULL
meaning "try the next request" and ERR_PTR(-EAGAIN) "try again
later". The third case will be dropped with further changes.
* In the initialization of proxy barrier request, data direction is
already set by init_request_from_bio(). Drop unnecessary explicit
REQ_WRITE setting and move init_request_from_bio() above REQ_FUA
flag setting.
* add_request() is collapsed into __make_request().
These changes don't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA
requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with
-EOPNOTSUPP and blk_queue_ordered() is replaced with simpler
blk_queue_flush().
blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a
device has write cache and can flush it, it should set REQ_FLUSH. If
the device can handle FUA writes, it should also set REQ_FUA.
All blk_queue_ordered() users are converted.
* ORDERED_DRAIN is mapped to 0 which is the default value.
* ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH.
* ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Nobody is making meaningful use of ORDERED_BY_TAG now and queue
draining for barrier requests will be removed soon which will render
the advantage of tag ordering moot. Kill ORDERED_BY_TAG. The
following users are affected.
* brd: converted to ORDERED_DRAIN.
* virtio_blk: ORDERED_TAG path was already marked deprecated. Removed.
* xen-blkfront: ORDERED_TAG case dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
While testing CPU DLPAR, the following problem was discovered.
We were DLPAR removing the first CPU, which in this case was
logical CPUs 0-3. CPUs 0-2 were already marked offline and
we were in the process of offlining CPU 3. After marking
the CPU inactive and offline in cpu_disable, but before the
cpu was completely idle (cpu_die), we ended up in __make_request
on CPU 3. There we looked at the topology map to see which CPU
to complete the I/O on and found no CPUs in the cpu_sibling_map.
This resulted in the block layer setting the completion cpu
to be NR_CPUS, which then caused an oops when we tried to
complete the I/O.
Fix this by sanity checking the value we return from blk_cpu_to_group
to be a valid cpu value.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently drivers must do an elevator_exit() + elevator_init()
to switch IO schedulers. There are a few problems with this:
- Since commit 1abec4fdbb,
elevator_init() requires a zeroed out q->elevator
pointer. The two existing in-kernel users don't do that.
- It will only work at initialization time, since using the
above two-staged construct does not properly quisce the queue.
So add elevator_change() which takes care of this, and convert
the elv_iosched_store() sysfs interface to use this helper as well.
Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reported-by: Kevin Vigor <kevin@vigor.nu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Return of the bi_rw tests is no longer bool after commit 74450be1. But
results of such tests are stored in bools. This doesn't fit in there
for some compilers (gcc 4.5 here), so either use !! magic to get real
bools or use ulong where the result is assigned somewhere.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Divyesh had gotten rid of this code in the past. I want to re-introduce it
back as it helps me a lot during debugging.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Implement a new tunable group_idle, which allows idling on the group
instead of a cfq queue. Hence one can set slice_idle = 0 and not idle
on the individual queues but idle on the group. This way on fast storage
we can get fairness between groups at the same time overall throughput
improves.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Implement another CFQ mode where we charge group in terms of number
of requests dispatched instead of measuring the time. Measuring in terms
of time is not possible when we are driving deeper queue depths and there
are requests from multiple cfq queues in the request queue.
o This mode currently gets activated if one sets slice_idle=0 and associated
disk supports NCQ. Again the idea is that on an NCQ disk with idling disabled
most of the queues will dispatch 1 or more requests and then cfq queue
expiry happens and we don't have a way to measure time. So start providing
fairness in terms of IOPS.
o Currently IOPS mode works only with cfq group scheduling. CFQ is following
different scheduling algorithms for queue and group scheduling. These IOPS
stats are used only for group scheduling hence in non-croup mode nothing
should change.
o For CFQ group scheduling one can disable slice idling so that we don't idle
on queue and drive deeper request queue depths (achieving better throughput),
at the same time group idle is enabled so one should get service
differentiation among groups.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Do not idle either on cfq queue or service tree if slice_idle=0. User does
not want any queue or service tree idling. Currently even if slice_idle=0,
we were waiting for request to finish before expiring the queue and that
can lead to lower queue depths.
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If the cgroup hierarchy for blkio control groups is deeper than two
levels, kernel should not allow the creation of further levels. mkdir
system call does not except EINVAL as a return value. This patch
replaces EINVAL with more appropriate EPERM
Signed-off-by: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Secure discard is the same as discard except that all copies of the
discarded sectors (perhaps created by garbage collection) must also be
erased.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid more patches, I also fixed other spelling
and grammar bugs when they were in the same or
following line:
successfull -> successful
parse -> parses
controler -> controller
controlers -> controllers
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- If function called without barrier option retvalue is incorrect
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Propagate REQ_DISCARD in cmd_flags when cloning a discard request.
Skip blk_rq_check_limits's existing checks for discard requests because
discard limits will have already been checked in blkdev_issue_discard.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
q->bar_rq.rq_disk is NULL. Use the rq_disk of the original request
instead.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
the block layer doesn't set rq->cmd_type on flush requests. By
definition, it should be REQ_TYPE_FS (the lower layers build a command
and interpret the result of it, that is, the block layer doesn't know
the details).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If the queue doesn't have a limit set, or it just set UINT_MAX like
we default to, we coud be sending down a discard request that isn't
of the correct granularity if the block size is > 512b.
Fix this by adjusting max_discard_sectors down to the proper
alignment.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Issuing a blkdev_issue_flush() on an unconfigured loop device causes a panic as
q->make_request_fn is not configured. This can occur when trying to mount the
unconfigured loop device as an XFS filesystem. There are no guards that catch
the bio before the request function is called because we don't add a payload to
the bio. Instead, manually check this case as soon as we have a pointer to the
queue to flush.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The blkpg_ioctl and blkdev_reread_part access fields of
the bdev and gendisk structures, yet they always do so
under the protection of bdev->bd_mutex, which seems
sufficient.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
cked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We only call the functions set_device_ro(),
invalidate_bdev(), sync_filesystem() and sync_blockdev()
while holding the BKL in these commands. All
of these are also done in other code paths without
the BKL, which leads me to the conclusion that
the BKL is not needed here either.
The reason we hold it here is that it was originally
pushed down into the ioctl function from vfs_ioctl.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The blktrace driver currently needs the BKL, but
we should not need to take that in the block layer,
so just push it down into the driver itself.
It is quite likely that the BKL is not actually
required in blktrace code and could be removed
in a follow-on patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
As a preparation for the removal of the big kernel
lock in the block layer, this removes the BKL
from the common ioctl handling code, moving it
into every single driver still using it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This is preparation for removing q->prepare_flush_fn.
Temporarily, blk_queue_ordered() permits QUEUE_ORDERED_DO_PREFLUSH and
QUEUE_ORDERED_DO_POSTFLUSH without prepare_flush_fn.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
SCSI-ml needs a way to mark a request as flush request in
q->prepare_flush_fn because it needs to identify them later (e.g. in
q->request_fn or prep_rq_fn).
queue_flush sets REQ_HARDBARRIER in rq->cmd_flags however the block
layer also sends normal REQ_TYPE_FS requests with REQ_HARDBARRIER. So
SCSI-ml can't use REQ_HARDBARRIER to identify flush requests.
We could change the block layer to clear REQ_HARDBARRIER bit before
sending non flush requests to the lower layers. However, intorudcing
the new flag looks cleaner (surely easier).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alasdair G Kergon <agk@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
