Commit graph

416 commits

Author SHA1 Message Date
Guennadi Liakhovetski
451c89578e mmc: extend the slot-gpio card-detection to use host's .card_event() method
The slot-gpio API provides a generic card-detection handler. To support a
wider range of hosts it has to call the host's card-event callback, if
implemented. Also increase the debounce interval to 200ms to match the
SDHCI driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-07 13:55:50 -05:00
Al Cooper
ccb52a00fd mmc: Limit MMC speed to 52MHz if not HS200
If "caps2" host capabilities does not indicate support for MMC
HS200, don't allow clock speeds >52MHz. Currently, for MMC, the
clock speed is set to the lesser of the max speed the eMMC module
supports (card->ext_csd.hs_max_dtr) or the max base clock of the
host controller (host->f_max based on BASE_CLK_FREQ in the host
CAPS register). This means that a host controller that doesn't
support HS200 mode but has a base clock of 100MHz and an eMMC module
that supports HS200 speeds will end up using a 100MHz clock.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:55:11 -05:00
Sachin Kamat
8db580ccfd mmc: Remove redundant null check before kfree in bus.c
kfree on a null pointer is a no-op.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:55:07 -05:00
Sachin Kamat
4c42d6cc24 mmc: Remove redundant null check before kfree in sdio_bus.c
kfree on a null pointer is a no-op.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:55:06 -05:00
Rafael J. Wysocki
b0afd8f68a mmc: sdio: Add empty bus-level suspend/resume callbacks
Suspend methods provided by SDIO drivers are not supposed to be called by
the PM core.  Instead, when the SDIO core gets to suspend a device's
ancestor, it calls the device driver's suspend routine.  However, the PM
core executes suspend callback routines directly for device drivers whose
bus types don't provide suspend callbacks.  In consequece, because the
SDIO bus type doesn't provide a suspend callback, the SDIO drivers'
suspend routines will be executed by the PM core (which shouldn't
happen).

To prevent this from happening, add empty system suspend/resume callbacks
for the SDIO bus type.

An analogous change had been made already by commit (e841a7c mmc: sdio:
Use empty system suspend/resume callbacks at the bus level), but then it
was reverted inadvertently by commit (d8e2ac3 mmc: sdio: Fix PM_SLEEP
related build warnings) that attempted to fix build warnings introduced
by commit e841a7c.

Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:55:04 -05:00
Loic Pallardy
67c79db8d9 mmc: core: Add mmc_set_blockcount feature
Provide support for automatically sending Set Block Count
(CMD23) messages. Used at least for RPMB support.

Signed-off-by: Alex Macro <alex.macro@stericsson.com>
Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Krishna Konda <kkonda@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:54:48 -05:00
Loic Pallardy
188cc0424e mmc: core: Extend sysfs to ext_csd parameters for RPMB support
Extend current sysfs access to ext_csd rpmb parameters (RPMB partition
size) and rel_sector information.

Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Krishna Konda <kkonda@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:54:48 -05:00
Loic Pallardy
090d25fe22 mmc: core: Expose access to RPMB partition
Following JEDEC standard, if the mmc supports RPMB partition,
a new interface is created and exposed via /dev/block.
Users will be able to access RPMB partition using standard
mmc IOCTL commands.

Signed-off-by: Alex Macro <alex.macro@stericsson.com>
Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Krishna Konda <kkonda@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:54:46 -05:00
Lee Jones
5f1a4dd037 mmc: Standardise capability type
There are discrepancies with regards to how MMC capabilities
are carried throughout the subsystem. Let's standardise them
to eliminate any confusion.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:54:44 -05:00
Kyoungil Kim
968a64ea63 mmc: sdio: Use multiple scatter/gather list
Before this patch, we always used only single sg entry for SDIO transfer.
This patch switches to using multiple sg entries. In the case of dwmci,
it supports only up to 4KB size per single sg entry. So if we want to
transfer more than 4KB, we should send more than 1 command.

When we tested before applying this patch, it took around 335 us for
5K(5120) bytes transfer with dwmci controller. After applying this patch,
it takes 242 us for 5K bytes. So this patch makes around 38% performance
improvement for 5K bytes transfer. If the transfer size is bigger, then
the performance improvement ratio will be increased.

Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:54:43 -05:00
Trey Ramsay
8fee476b21 mmc: core: Fix some driver hangs when dealing with broken devices
There are infinite loops in the mmc code that can be caused by bad
hardware.  The code will loop forever if the device never comes back
from program mode, R1_STATE_PRG, and it is not ready for data,
R1_READY_FOR_DATA.

A long timeout is added to prevent the code from looping forever.
The timeout will occur if the device never comes back from program
state or the device never becomes ready for data.

It's not clear whether the timeout will do more than log a pr_err()
and then start a fresh hang all over again.  We may need to extend
this patch later to perform some kind of reset of the device (is
that possible?) or rejection of new I/O to the device.

Signed-off-by: Trey Ramsay <tramsay@linux.vnet.ibm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:54:42 -05:00
Johan Rudholm
42cd95a060 mmc: core: debugfs: Add signal_voltage to ios dump
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-by: Philip Rakity <prakity@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-06 13:54:36 -05:00
Linus Torvalds
943c2acea5 MMC highlights for 3.7:
Core:
  - Add DT properties for card detection (broken-cd, cd-gpios, non-removable)
  - Don't poll non-removable devices
  - Fixup/rework eMMC sleep mode/"power off notify" feature
  - Support eMMC background operations (BKOPS).  To set the one-time
    programmable fuse that enables bkops on an eMMC that doesn't already
    have it set, you can use the "mmc bkops enable" command in:
      git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git
 
 Drivers:
  - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support
  - bfin_sdh: Add support for the controller in bf60x
  - dw_mmc: Support Samsung Exynos SoCs
  - eSDHC: Add ADMA support
  - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit
  - sdhci-pltfm: Support broken-cd DT property
  - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQcfc/AAoJEHNBYZ7TNxYMB3wQALPObZUjKBsR38N2llPUOz5M
 nTMNYa99Pg3/Du5EgXKwYDkoYG1M9yjNTdxBmz3Sz9cIkLueZHoDmqvpgZJv9vRn
 5l0TncExC+T2Tn7qjE5axgM7fus5r9SLKCOtbE+V8jATTWeG0d/X0DdzvKPpJLmb
 uLPmqNG50LdQQUoCkcDU3hiDONqQnOx4tDq4C7rTlf+Cr8pJXRoBPEF0C1PTvs64
 0AP8oXDtirz+RIR5xTELy08o4SVS4Wcn63PH1H56kmAIjdT5FeVnAOeyF9Aer/+R
 Sz3qMrN/sNSEEkbgCGQLJVVYACNdgB1WXdxhqk2d996iwtEQgkVB8S2ziyhpZTZ2
 SxgCMvfYf5ySOIuzvyEScGdKjw6DSV01HDr9eyFJqIYaDOBp+kUJkbM2O8ISf+Kb
 rudrc58mdfPPhX5rqjEYBKGtyC6q+LvRGOwO8QJNvZ0wAFAg4nCzcD9btAl65QR1
 7aM0qp+55pyc2xyUO9q5AvOwiaBU2sYYuBCUm1zzK3HQ8x5ZKpueQwa2KBmEa2f+
 Qp6oflWNeG/X53WHCurl/ECZY5Y4w4esHPMWXVXJP8Ao+3D2Wofkp4CSGcQClZSd
 /OBGSw9g70BIKwOTUvU9tD3ALQsG+A9UHmG7RQBhmcQFaKY709bfhzSG3/jHymSg
 AKr0VSezE/DTj6URvxaq
 =qyY5
 -----END PGP SIGNATURE-----

Merge tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "Core:
   - Add DT properties for card detection (broken-cd, cd-gpios,
     non-removable)
   - Don't poll non-removable devices
   - Fixup/rework eMMC sleep mode/"power off notify" feature
   - Support eMMC background operations (BKOPS).  To set the one-time
     programmable fuse that enables bkops on an eMMC that doesn't
     already have it set, you can use the "mmc bkops enable" command in:

       git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git

  Drivers:
   - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree
     support
   - bfin_sdh: Add support for the controller in bf60x
   - dw_mmc: Support Samsung Exynos SoCs
   - eSDHC: Add ADMA support
   - sdhci: Support testing a cd-gpio (from slot-gpio) instead of
     presence bit
   - sdhci-pltfm: Support broken-cd DT property
   - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)"

* tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits)
  mmc: core: Fixup broken suspend and eMMC4.5 power off notify
  mmc: sdhci-spear: Add clk_{un}prepare() support
  mmc: sdhci-spear: add device tree bindings
  mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume
  mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator
  mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks
  mmc: dt: Support "broken-cd" property in sdhci-pltfm
  mmc: sdhci-s3c: fix the wrong number of max bus clocks
  mmc: sh-mmcif: avoid oops on spurious interrupts
  mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ
  mmc: sdhci-s3c: Fix crash on module insertion for second time
  mmc: sdhci-s3c: Enable only required bus clock
  mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration"
  mmc: mxcmmc: fix bug that may block a data transfer forever
  mmc: omap_hsmmc: Pass on the suspend failure to the PM core
  mmc: atmel-mci: AP700x PDC is not connected to MCI
  mmc: atmel-mci: DMA can be used with other controllers
  mmc: mmci: use clk_prepare_enable and clk_disable_unprepare
  mmc: sdhci-s3c: Add device tree support
  mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
  ...
2012-10-10 10:58:42 +09:00
Ulf Hansson
e6c085863f mmc: core: Fixup broken suspend and eMMC4.5 power off notify
This patch fixes up the broken suspend sequence for eMMC with sleep
support. Additionally it reworks the eMMC4.5 Power Off Notification
feature so it fits together with the existing sleep feature.

The CMD0 based re-initialization of the eMMC at resume is re-introduced
to maintain compatiblity for devices using sleep.

A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off
Notification feature. We might be able to remove this cap later on,
if we think that Power Off Notification always is preferred over
sleep, even if the host is not able to cut the eMMC VCCQ power.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saugata Das <saugata.das@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07 17:41:45 -04:00
Chris Ball
9cde5b7a49 mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator
Before this patch, we were using MMC_CAP2_BROKEN_VOLTAGE as a way to
avoid calling regulator_set_voltage() on a fixed regulator, but that's
just duplicating information that already exists -- we should test
whether the regulator is fixed directly, instead of via a capability.

This patch implements that test.  We can't reclaim the capability bit
just yet, since there are still boards in arch/arm/ that reference it;
those references can be removed now.

Reported-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07 17:41:43 -04:00
Jaehoon Chung
950d56acce mmc: support BKOPS feature for eMMC
Enable eMMC background operations (BKOPS) feature.

If URGENT_BKOPS is set after a response, note that BKOPS are required.
Immediately run BKOPS if required.  Read/write operations should be
requested during BKOPS(LEVEL-1), then issue HPI to interrupt the
ongoing BKOPS and service the foreground operation.
(This patch only controls the LEVEL2/3.)

When repeating the writing 1GB data, at a certain time, performance is
decreased.  At that time, card triggers the Level-3 or Level-2.  After
running bkops, performance is recovered.

Future considerations:
 * Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
 * Interrupt ongoing BKOPS before powering off the card.
 * How do we get BKOPS_STATUS value (periodically send ext_csd command)?
 * If using periodic bkops, also consider runtime_pm control.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03 10:05:12 -04:00
Linus Torvalds
033d9959ed Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue changes from Tejun Heo:
 "This is workqueue updates for v3.7-rc1.  A lot of activities this
  round including considerable API and behavior cleanups.

   * delayed_work combines a timer and a work item.  The handling of the
     timer part has always been a bit clunky leading to confusing
     cancelation API with weird corner-case behaviors.  delayed_work is
     updated to use new IRQ safe timer and cancelation now works as
     expected.

   * Another deficiency of delayed_work was lack of the counterpart of
     mod_timer() which led to cancel+queue combinations or open-coded
     timer+work usages.  mod_delayed_work[_on]() are added.

     These two delayed_work changes make delayed_work provide interface
     and behave like timer which is executed with process context.

   * A work item could be executed concurrently on multiple CPUs, which
     is rather unintuitive and made flush_work() behavior confusing and
     half-broken under certain circumstances.  This problem doesn't
     exist for non-reentrant workqueues.  While non-reentrancy check
     isn't free, the overhead is incurred only when a work item bounces
     across different CPUs and even in simulated pathological scenario
     the overhead isn't too high.

     All workqueues are made non-reentrant.  This removes the
     distinction between flush_[delayed_]work() and
     flush_[delayed_]_work_sync().  The former is now as strong as the
     latter and the specified work item is guaranteed to have finished
     execution of any previous queueing on return.

   * In addition to the various bug fixes, Lai redid and simplified CPU
     hotplug handling significantly.

   * Joonsoo introduced system_highpri_wq and used it during CPU
     hotplug.

  There are two merge commits - one to pull in IRQ safe timer from
  tip/timers/core and the other to pull in CPU hotplug fixes from
  wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."

Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.

Tejun pointed out a few of them, I fixed a couple more.

* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
  workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
  workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
  workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
  workqueue: remove @delayed from cwq_dec_nr_in_flight()
  workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
  workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
  workqueue: use __cpuinit instead of __devinit for cpu callbacks
  workqueue: rename manager_mutex to assoc_mutex
  workqueue: WORKER_REBIND is no longer necessary for idle rebinding
  workqueue: WORKER_REBIND is no longer necessary for busy rebinding
  workqueue: reimplement idle worker rebinding
  workqueue: deprecate __cancel_delayed_work()
  workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
  workqueue: use mod_delayed_work() instead of __cancel + queue
  workqueue: use irqsafe timer for delayed_work
  workqueue: clean up delayed_work initializers and add missing one
  workqueue: make deferrable delayed_work initializer names consistent
  workqueue: cosmetic whitespace updates for macro definitions
  workqueue: deprecate system_nrt[_freezable]_wq
  workqueue: deprecate flush[_delayed]_work_sync()
  ...
2012-10-02 09:54:49 -07:00
Thierry Reding
d8e2ac330f mmc: sdio: Fix PM_SLEEP related build warnings
Power management callbacks defined by SIMPLE_DEV_PM_OPS are only used if
the PM_SLEEP Kconfig symbol has been defined. If not, the compiler will
complain about them being unused. However, since the callback for this
driver doesn't do anything it can just as well be dropped.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-19 16:29:43 +08:00
Kyungsik Lee
1a41313e7f mmc: core: Remove bounce buffer in mmc_send_cxd_data()
It is expected that Extended CSD register (the size of this register
is larger than CID/CSD) will be referenced more frequently as more
fields have been added to Extended CSD and it seems that it is not
a good option to double the memory used.

This patch is intended to avoid the use of bounce buffer for reading
Extended CSD register in mmc_send_cxd_data(). It will provide a better
performance gain by removing memcpy() overhead for a half KiB and
a redundant bounce buffer allocated repeatedly at the cost of providing
DMA-capable buffer from upper caller (but on-stack buffer is allowed
with no performance gain).

Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-19 16:29:42 +08:00
Chris Ball
15e8a8e429 mmc: slot-gpio: Fix missing assignment to ctx->ro_gpio
mmc_gpio_request_ro() doesn't store the requested gpio in ctx->ro_gpio.
As a result, subsequent calls to mmc_gpio_get_ro() will always fail
with -ENOSYS because the gpio number isn't available to that function.

Cc: stable <stable@vger.kernel.org>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-11 10:55:20 -04:00
Johan Rudholm
3339d1e331 mmc: core: Do not rescan non-removable devices
If MMC_CAP_NONREMOVABLE is set, only issue a detect job on init.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04 13:58:27 -04:00
Venkatraman S
6780162c00 mmc: debugfs: Print ext_csd in ascending order
ext_csd exported through debugfs is printed in reverse order (from
byte 511 to 0), which causes confusion.
Fix the for loop to print ext_csd in natural order.

Signed-off-by: Venkatraman S <svenkatr@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04 13:58:21 -04:00
Venkatraman S
211d4fe580 mmc: core: Add TRANsfer state to non-HPI state
HPI can be issued only in programming state to bring the card to
transfer state. If the card is already in transfer state, doing
a HPI is redundant.
Fix this by adding transfer state to the list of exceptions to
doing HPI and return without error.

Signed-off-by: Venkatraman S <svenkatr@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04 13:58:20 -04:00
Masanari Iida
7122bbb0d1 mmc: fix comment typos
Correct spelling typo in drivers/mmc

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 09:52:48 -07:00
Tejun Heo
3b07e9ca26 workqueue: deprecate system_nrt[_freezable]_wq
system_nrt[_freezable]_wq are now spurious.  Mark them deprecated and
convert all users to system[_freezable]_wq.

If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant, so there's no reason to use system_nrt[_freezable]_wq.
Please use system[_freezable]_wq instead.

This patch doesn't make any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-By: Lai Jiangshan <laijs@cn.fujitsu.com>

Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
2012-08-20 14:51:24 -07:00
Aaron Lu
108ecc4cf9 mmc: core: reset signal voltage on power up
Add a call to mmc_set_signal_voltage() to set signal voltage to 3.3v in
mmc_power_up so that we do not need to touch signal voltage setting in
mmc/sd/sdio init functions and rescan function.

For mmc/sd cards, when doing a suspend/resume cycle, consider the unsafe
resume case, the card will lose its power and when powered on again, we
will set signal voltage to 3.3v in mmc_power_up before its resume function
gets called, which will re-init the card.

And for sdio cards, when doing a suspend/resume cycle, consider the unsafe
resume case, the card will either lose its power or not depending on if it
wants to wakeup the host. If power is not maintained, it is the same case as
mmc/sd cards. If power is maintained, mmc_power_up will not be called and
the card's signal voltage will remain at the last setting.

Signed-off-by: Aaron Lu <aaron.lu@amd.com>
Tested-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-22 15:25:53 -04:00
Aaron Lu
55c4665ea0 mmc: sd: Fix sd current limit setting
Host has different current capabilities at different voltages, we need
to record these settings seperately. The defined voltages are 1.8/3.0/3.3.
For other voltages, we do not touch current limit setting.

Before we set the current limit for the sd card, find out the host's
operating voltage first and then find out the current capabilities of
the host at that voltage to set the current limit.

Signed-off-by: Aaron Lu <aaron.lu@amd.com>
Reviewed-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-22 15:25:52 -04:00
Liu Chuansheng
aa6439dadd mmc: sdio: Change pr_warning to pr_warn_ratelimited
When debugging one bad issue, got lots of pr_warning messages
"queuing unknown CIS tuple" which caused a printk storm and
flooded the console.

This patch changes the pr_warning to use pr_warn_ratelimited.

Signed-off-by: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-22 15:25:48 -04:00
Aaron Lu
a39ca6ae0a mmc: core: Simplify and fix for SD switch processing
In mmc_read_switch, just do a one time mode 0 switch command to get the
support bits information, no need to do multiple times as the support
bits do not change with different arguments.

And no need to check current limit support bits, as these bits are
fixed according to the signal voltage. If the signal voltage is 1.8V,
the support bits would be 0xf and if the signal voltage is 3.3V, the
support bits would be 0x01. We will check host's ability to set the
current limit.

Signed-off-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-22 15:25:47 -04:00
Alan Cox
b63b5e819d mmc: core: correct invalid error checking
The effect of the existing code is that we continue blindly when we
should warn about an invalid allocation unit.

Reported-by: dcb314@hotmail.com
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44061
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:24 -04:00
Philip Rakity
0aa6770000 mmc: sdhci: only set 200mA support for 1.8v if 200mA is available
max_current_caps can return 0 if not available from the sd controller.
If no regulator is present or the regulator specifies a current
less then 200ma, we no longer still set the 200mA caps bit anyway.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Reviewed-by: Aaron Lu <aaron_lu@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:23 -04:00
Guennadi Liakhovetski
d9adcc1286 mmc: prohibit card detection when host is not ready
Currently mmc host drivers have to decide whether to enable card
detection before calling mmc_add_host() -- in which case a card
insertion event can arrive before the host has been completely
initialised -- or after mmc_add_host(), in which case the initial
card detection can be problematic.

This patch adds an explicit indication of when card detection should
not be carried out. With it in place enabling card detection before
calling mmc_add_host() should be safe. Similarly, disabling it again
after calling mmc_remove_host() will avoid any races.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:21 -04:00
Guennadi Liakhovetski
5aa7dad305 mmc: core: add WP pin handler to slot functions
Card Write-Protect pin is often implemented, using a GPIO, which makes
it simple to provide a generic handler for it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:18 -04:00
Guennadi Liakhovetski
a7d1a1ebd8 mmc: core: convert slot functions to managed allocation
This prepares for the addition of further slot functions.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:17 -04:00
Guennadi Liakhovetski
befe4048d8 mmc: add CD GPIO polling support to slot functions
A simple extension of mmc slot functions add support for CD GPIO polling
for cases where the GPIO cannot produce interrupts, or where this is not
desired for some reason.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:17 -04:00
Guennadi Liakhovetski
27410ee7e3 mmc: core: use a more generic name for slot function types and fields
struct mmc_host::hotplug is becoming a generic hook for slot functions.
Rename it accordingly.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:16 -04:00
Guennadi Liakhovetski
e137788dd1 mmc: add a function to get regulators, supplying card's power
Add a function to get regulators, supplying card's Vdd and Vccq on a
specific host. If a Vdd supplying regulator is found, the function checks,
whether a valid OCR mask can be obtained from it. The Vccq regulator is
optional. A failure to get it is not fatal.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21 00:02:08 -04:00
Chris Ball
45a6b32e24 mmc: core: Export regulator_* functions as GPL
The regulator API functions we're wrapping are exported as GPL, so our
wrappers for the same functions should be too.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-10 23:04:06 -04:00
Venkatraman S
6af9e96e05 mmc: core: Fix the HPI execution sequence
mmc_execute_hpi should send the HPI command only once, and only
if the card is in PRG state.

According to eMMC spec, the command's completion time is
not dependent on OUT_OF_INTERRUPT_TIME. Only the transition
out of PRG STATE is guarded by OUT_OF_INTERRUPT_TIME - which
is defined to begin at the end of sending the command itself.

Specify the default timeout for the actual sending of HPI
command, and then use OUT_OF_INTERRUPT_TIME to wait for
the transition out of PRG state.

Reported-by: Alex Lemberg <Alex.Lemberg@sandisk.com>
Signed-off-by: Venkatraman S <svenkatr@ti.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-10 23:04:04 -04:00
Guennadi Liakhovetski
fd0ea65d3e mmc: extend and rename cd-gpio helpers to handle more slot GPIO functions
GPIOs can be used in MMC/SD-card slots not only for hotplug detection, but
also to implement the write-protection pin. Rename cd-gpio helpers to
slot-gpio to make addition of further slot GPIO functions possible.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-10 23:04:04 -04:00
Guennadi Liakhovetski
623b51fc86 mmc: cd-gpio: pass IRQF_ONESHOT to request_threaded_irq()
Fix a boot regression on Mackerel boards with sh_mobile_sdhi
in existing kernels causing:

genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq XXX

caused by 1c6c6952 (genirq: Reject bogus threaded irq requests).

This is backported from Guennadi's patch:
"mmc: extend and rename cd-gpio helpers to handle more slot GPIO functions"

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-10 23:03:57 -04:00
Venkatraman S
87f761b6c0 mmc: core: Revert "skip card initialization if power class selection fails"
This reverts commit 3d93576e(skip card initialization if
power class selection fails).
Problem has been reported when this is used with eMMC4.41
card with Tegra Platform. Till the issue is root caused,
bus width selection failure should not be treated as fatal.

Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-Off-by: Venkatraman S <svenkatr@ti.com>
CC: Ulf Hansson <ulf.hansson@stericsson.com>
CC: Subhash Jadavani <subhashj@codeaurora.org>
CC: Saugata Das <saugata.das@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-10 22:47:13 -04:00
Jaehoon Chung
85e727edb9 mmc: core: return an error on suspend if mmc_deselect_cards fails
When mmc_host is not spi mode, mmc/sd is doing mmc_deselect_cards().
mmc_deselect_cards could be returned error.
If returned error, we can know something wrong when enter suspend.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:49:47 -04:00
Yong Ding
2a0fe914a3 mmc: sdio: fix setting card data bus width as 4-bit
SDIO_CCCR_IF[1:0] in SDIO card is used for card data bus width
setting as below:

     00b: 1-bit bus
     01b: Reserved
     10b: 4-bit bus
     11b: 8-bit bus (only for embedded SDIO)

And sdio_enable_wide is for setting data bus width as 4-bit.
But currently, it first reads the register, second OR' 1b with
SDIO_CCCR_IF[1], and then writes it back.

As we can see, this is based on such assumption that the
SDIO_CCCR_IF[0] is always 0. Apparently, this is not right.

Signed-off-by: Yong Ding <yongd@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:22:53 -04:00
Saugata Das
a5075eb948 mmc: block: Allow disabling 512B sector size emulation
This patch adds support for large sector size of 4KB by disabling
emulation.  This patch passes eMMC DATA_SECTOR_SIZE as the logical
block size during mmc_blk_alloc_req.

In order to use this patch for 4KB sector size, ensure that
USE_NATIVE_SECTOR is enabled, partition table is 4KB sector size
aligned and file system block and sector size are 4KB multiples.

Signed-off-by: Saugata Das <saugata.das@linaro.org>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-17 09:35:21 -04:00
Philippe De Swert
f6f44590f2 mmc: core: Remove dead code
bus_width is passed to the function and when 0 (MMC_BUS_WIDTH_1)
will cause the function to return. So in in the second test it
definitely is different from 0, and the third test is redundant.

Signed-off-by: Philippe De Swert <philippedeswert@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09 20:47:49 -04:00
Ulf Hansson
fa5501890d mmc: core: Prevent eMMC VCC supply to be cut from late init
For eMMC cards that has been initialized from a bootloader,
the VCC voltage supply must not be cut in an uncontrolled
manner, without first sending SLEEP or POWEROFF_NOTIFY.

The regulator_init_complete late initcall, may cut the VCC
regulator if it's reference counter is zero. To be able to
prevent the regulator from being cut, mmc_start_host, which
should execute at device init and thus before late init,
calls mmc_power_up. Then the host driver is able to increase
the reference to the regulator.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09 12:55:01 -04:00
Subhash Jadavani
3d93576e34 mmc: core: skip card initialization if power class selection fails
With current implementation of power class selection,
mmc_select_powerclass() should never fail. So treat any error
returned by this function as serious enough to skip the card
initialization.

Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09 10:07:12 -04:00
Seungwon Jeon
10942aa40a mmc: core: fix the signaling 1.8V for HS200
Currently only 1.2V is treated for HS200 mode. If the host has only
1.8V I/O capability not 1.2V, mmc_set_signal_voltage can't be called
for 1.8V HS200. EXT_CSD_CARD_TYPE_SDR_1_8V needs to be considered.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09 10:04:12 -04:00
Seungwon Jeon
96cf5f02ae mmc: core: fix the decision of HS200/DDR card-type
Current implementation decides the card type exclusively. Even though
eMMC device can support both HS200 and DDR mode, card type will be
set only for HS200. If the host doesn't support HS200 but has DDR
capability, then DDR mode can't be selected.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09 10:03:21 -04:00