Commit graph

65 commits

Author SHA1 Message Date
Denis V. Lunev
76e6ebfb40 netns: add namespace parameter to rt_cache_flush
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05 19:00:44 -07:00
Adrian Bunk
0b04082995 net: remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11 21:00:38 -07:00
Denis Cheng
51f82a2b12 net/ipv4/arp.c: Use common hex_asc helpers
Here the local hexbuf is a duplicate of global const char hex_asc from
lib/hexdump.c, except the hex letters' cases:

	const char hexbuf[] = "0123456789ABCDEF";

	const char hex_asc[] = "0123456789abcdef";

and here to print HW addresses, the hex cases are not significant.

Thanks to Harvey Harrison to introduce the hex_asc_hi/hex_asc_lo helpers.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-21 17:34:32 -07:00
Johannes Berg
f5184d267c net: Allow netdevices to specify needed head/tailroom
This patch adds needed_headroom/needed_tailroom members to struct
net_device and updates many places that allocate sbks to use them. Not
all of them can be converted though, and I'm sure I missed some (I
mostly grepped for LL_RESERVED_SPACE)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12 20:48:31 -07:00
YOSHIFUJI Hideaki
a7d632b6b4 [IPV4]: Use NIPQUAD_FMT to format ipv4 addresses.
And use %u to format port.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14 04:09:00 -07:00
YOSHIFUJI Hideaki
c346dca108 [NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.
Introduce per-net_device inlines: dev_net(), dev_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:39:53 +09:00
Denis V. Lunev
ffc31d3d77 [NETNS]: /proc/net/arp namespacing.
Seqfile operation showing /proc/net/arp are already namespace
aware. All we need is to register this file for each namespace.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-24 15:28:43 -07:00
Denis V. Lunev
49e8a279a1 [NETNS]: Process ARP in the context of the correct namespace.
Get namespace from a device and pass it to the routing engine. Enable
ARP packet processing and device notifiers after that.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-24 15:28:12 -07:00
Eric Dumazet
ee6b967301 [IPV4]: Add 'rtable' field in struct sk_buff to alias 'dst' and avoid casts
(Anonymous) unions can help us to avoid ugly casts.

A common cast it the (struct rtable *)skb->dst one.

Defining an union like  :
union {
     struct dst_entry *dst;
     struct rtable *rtable;
};
permits to use skb->rtable in place.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:30:47 -08:00
Pavel Emelyanov
988b705077 [ARP]: Introduce the arp_hdr_len helper.
There are some place, that calculate the ARP header length. These
calculations are correct, but 
 a) some operate with "magic" constants,
 b) enlarge the code length (sometimes at the cost of coding style),
 c) are not informative from the first glance.

The proposal is to introduce a helper, that includes all the good
sides of these calculations.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03 12:20:57 -08:00
David S. Miller
9ff5660746 Revert "[NDISC]: Fix race in generic address resolution"
This reverts commit 69cc64d8d9.

It causes recursive locking in IPV6 because unlike other
neighbour layer clients, it even needs neighbour cache
entries to send neighbour soliciation messages :-(

We'll have to find another way to fix this race.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17 18:39:54 -08:00
David S. Miller
69cc64d8d9 [NDISC]: Fix race in generic address resolution
Frank Blaschka provided the bug report and the initial suggested fix
for this bug.  He also validated this version of this fix.

The problem is that the access to neigh->arp_queue is inconsistent, we
grab references when dropping the lock lock to call
neigh->ops->solicit() but this does not prevent other threads of
control from trying to send out that packet at the same time causing
corruptions because both code paths believe they have exclusive access
to the skb.

The best option seems to be to hold the write lock on neigh->lock
during the ->solicit() call.  I looked at all of the ndisc_ops
implementations and this seems workable.  The only case that needs
special care is the IPV4 ARP implementation of arp_solicit().  It
wants to take neigh->lock as a reader to protect the header entry in
neigh->ha during the emission of the soliciation.  We can simply
remove the read lock calls to take care of that since holding the lock
as a writer at the caller providers a superset of the protection
afforded by the existing read locking.

The rest of the ->solicit() implementations don't care whether the
neigh is locked or not.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-12 17:54:17 -08:00
Jan Engelhardt
abfdf1c489 [NETFILTER]: ebtables: remove casts, use consts
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:33 -08:00
Denis V. Lunev
f206351a50 [NETNS]: Add namespace parameter to ip_route_output_key.
Needed to propagate it down to the ip_route_output_flow.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:07 -08:00
Denis V. Lunev
39a6d06300 [NETNS]: Process inet_confirm_addr in the correct namespace.
inet_confirm_addr can be called with NULL in_dev from arp_ignore iff
scope is RT_SCOPE_LINK.

Lets always pass the device and check for RT_SCOPE_LINK scope inside
inet_confirm_addr. This let us take network namespace from in_device a
need for an additional argument.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:02:13 -08:00
Denis V. Lunev
9bd85e3264 [IPV4]: Remove extra argument from arp_ignore.
arp_ignore has two arguments: dev & in_dev. dev is used for
inet_confirm_addr calling only.

inet_confirm_addr, in turn, either gets in_dev from the device passed
or iterates over all network devices if the device passed is NULL. It
seems logical to directly pass in_dev into inet_confirm_addr.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:02:12 -08:00
Denis V. Lunev
2db82b534b [NETNS]: Make arp code network namespace consistent.
Some calls in the arp.c have network namespace as an argument. Getting
init_net inside these functions is simply inconsistent. Fix this.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:02:08 -08:00
Denis V. Lunev
a79878f00d [ARP]: Move inet_addr_type call after simple error checks in arp_contructor.
The neighbour entry will be destroyed in the case of error, so it is
pointless to perform constly routing table lookup in this case.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:02:08 -08:00
Eric W. Biederman
6b175b26c1 [NETNS]: Add netns parameter to inet_(dev_)add_type.
The patch extends the inet_addr_type and inet_dev_addr_type with the
network namespace pointer. That allows to access the different tables
relatively to the network namespace.

The modification of the signature function is reported in all the
callers of the inet_addr_type using the pointer to the well known
init_net.

Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:27 -08:00
Rami Rosen
cb7928a528 [IPV4]: Remove unsupported DNAT (RTCF_NAT and RTCF_NAT) in IPV4
- The DNAT (Destination NAT) is not implemented in IPV4.

- This patch remove the code which checks these flags
in net/ipv4/arp.c and net/ipv4/route.c.

The RTCF_NAT and RTCF_NAT should stay in the header (linux/in_route.h)
because they are used in DECnet.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:07 -08:00
Eric W. Biederman
426b5303eb [NETNS]: Modify the neighbour table code so it handles multiple network namespaces
I'm actually surprised at how much was involved.  At first glance it
appears that the neighbour table data structures are already split by
network device so all that should be needed is to modify the user
interface commands to filter the set of neighbours by the network
namespace of their devices.

However a couple things turned up while I was reading through the
code.  The proxy neighbour table allows entries with no network
device, and the neighbour parms are per network device (except for the
defaults) so they now need a per network namespace default.

So I updated the two structures (which surprised me) with their very
own network namespace parameter.  Updated the relevant lookup and
destroy routines with a network namespace parameter and modified the
code that interacts with users to filter out neighbour table entries
for devices of other namespaces.

I'm a little concerned that we can modify and display the global table
configuration and from all network namespaces.  But this appears good
enough for now.

I keep thinking modifying the neighbour table to have per network
namespace instances of each table type would should be cleaner.  The
hash table is already dynamically sized so there are it is not a
limiter.  The default parameter would be straight forward to take care
of.  However when I look at the how the network table is built and
used I still find some assumptions that there is only a single
neighbour table for each type of table in the kernel.  The netlink
operations, neigh_seq_start, the non-core network users that call
neigh_lookup.  So while it might be doable it would require more
refactoring than my current approach of just doing a little extra
filtering in the code.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:03 -08:00
Joe Perches
f97c1e0c6e [IPV4] net/ipv4: Use ipv4_is_<type>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:58:15 -08:00
Pavel Emelyanov
586f121152 [IPV4]: Switch users of ipv4_devconf(_all) to use the pernet one
These are scattered over the code, but almost all the
"critical" places already have the proper struct net
at hand except for snmp proc showing function and routing
rtnl handler.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:58:12 -08:00
Pavel Emelyanov
32e569b727 [IPV4]: Pass the net pointer to the arp_req_set_proxy()
This one will need to set the IPV4_DEVCONF_ALL(PROXY_ARP), but
there's no ways to get the net right in place, so we have to
pull one from the inet_ioctl's struct sock.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:58:09 -08:00
Pavel Emelyanov
f8b33fdfaf [ARP]: Consolidate some code in arp_req_set/delete_publc
The PROXY_ARP is set on devconfigs in a similar way in
both calls.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:56:38 -08:00
Pavel Emelyanov
46479b4329 [ARP]: Minus one level of ndentation in arp_req_delete
The same cleanup for deletion requests.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:56:38 -08:00
Pavel Emelyanov
43dc170117 [ARP]: Minus one level of indentation in arp_req_set
The ATF_PUBL requests are handled completely separate from
the others. Emphasize it with a separate function. This also
reduces the indentation level.

The same issue exists with the arp_delete_request, but
when I tried to make it in one patch diff produced completely
unreadable patch. So I split it into two, but they may be
done with one commit.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:56:37 -08:00
Rolf Manderscheid
a9e527e3f9 IPoIB: improve IPv4/IPv6 to IB mcast mapping functions
An IPoIB subnet on an IB fabric that spans multiple IB subnets can't
use link-local scope in multicast GIDs.  The existing routines that
map IP/IPv6 multicast addresses into IB link-level addresses hard-code
the scope to link-local, and they also leave the partition key field
uninitialised.  This patch adds a parameter (the link-level broadcast
address) to the mapping routines, allowing them to initialise both the
scope and the P_Key appropriately, and fixes up the call sites.

The next step will be to add a way to configure the scope for an IPoIB
interface.

Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:37 -08:00
Mark Ryden
e0260feddf [IPV4] ARP: Remove not used code
In arp_process() (net/ipv4/arp.c), there is unused code: definition
and assignment of tha (target hw address ).

Signed-off-by: Mark Ryden <markryde@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-19 23:38:11 -08:00
Adrian Bunk
3660019e5f [IPV4]: Remove bogus ifdef mess in arp_process
The #ifdef's in arp_process() were not only a mess, they were also wrong 
in the CONFIG_NET_ETHERNET=n and (CONFIG_NETDEV_1000=y or 
CONFIG_NETDEV_10000=y) cases.

Since they are not required this patch removes them.

Also removed are some #ifdef's around #include's that caused compile 
errors after this change.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-26 23:17:53 +08:00
Jonas Danielsson
b4a9811c42 [ARP]: Fix arp reply when sender ip 0
Fix arp reply when received arp probe with sender ip 0.

Send arp reply with target ip address 0.0.0.0 and target hardware
address set to hardware address of requester. Previously sent reply
with target ip address and target hardware address set to same as
source fields.

Signed-off-by: Jonas Danielsson <the.sator@gmail.com>
Acked-by: Alexey Kuznetov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-20 17:38:16 -08:00
Pavel Emelyanov
cf7732e4cc [NET]: Make core networking code use seq_open_private
This concerns the ipv4 and ipv6 code mostly, but also the netlink
and unix sockets.

The netlink code is an example of how to use the __seq_open_private()
call - it saves the net namespace on this private.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:33 -07:00
Stephen Hemminger
3b04ddde02 [NET]: Move hardware header operations out of netdevice.
Since hardware header operations are part of the protocol class
not the device instance, make them into a separate object and
save memory.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:52 -07:00
Stephen Hemminger
0c4e85813d [NET]: Wrap netdevice hardware header creation.
Add inline for common usage of hardware header creation, and
fix bug in IPV6 mcast where the assumption about negative return is
an errno. Negative return from hard_header means not enough space
was available,(ie -N bytes).

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:50 -07:00
Eric W. Biederman
881d966b48 [NET]: Make the device list and device lookups per namespace.
This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:10 -07:00
Eric W. Biederman
e9dc865340 [NET]: Make device event notification network namespace safe
Every user of the network device notifiers is either a protocol
stack or a pseudo device.  If a protocol stack that does not have
support for multiple network namespaces receives an event for a
device that is not in the initial network namespace it quite possibly
can get confused and do the wrong thing.

To avoid problems until all of the protocol stacks are converted
this patch modifies all netdev event handlers to ignore events on
devices that are not in the initial network namespace.

As the rest of the code is made network namespace aware these
checks can be removed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:09 -07:00
Eric W. Biederman
e730c15519 [NET]: Make packet reception network namespace safe
This patch modifies every packet receive function
registered with dev_add_pack() to drop packets if they
are not from the initial network namespace.

This should ensure that the various network stacks do
not receive packets in a anything but the initial network
namespace until the code has been converted and is ready
for them.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:08 -07:00
Eric W. Biederman
457c4cbc5a [NET]: Make /proc/net per network namespace
This patch makes /proc/net per network namespace.  It modifies the global
variables proc_net and proc_net_stat to be per network namespace.
The proc_net file helpers are modified to take a network namespace argument,
and all of their callers are fixed to pass &init_net for that argument.
This ensures that all of the /proc/net files are only visible and
usable in the initial network namespace until the code behind them
has been updated to be handle multiple network namespaces.

Making /proc/net per namespace is necessary as at least some files
in /proc/net depend upon the set of network devices which is per
network namespace, and even more files in /proc/net have contents
that are relevant to a single network namespace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:06 -07:00
Jean Delvare
1b1ac759d7 [IPV4]: Cleanup call to __neigh_lookup()
Back in the times of Linux 2.2, negative values for the creat parameter
of __neigh_lookup() had a particular meaning, but no longer, so we
should pass 1 instead.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 20:51:44 -07:00
Herbert Xu
42f811b8bc [IPV4]: Convert IPv4 devconf to an array
This patch converts the ipv4_devconf config members (everything except
sysctl) to an array.  This allows easier manipulation which will be
needed later on to provide better management of default config values.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:39:13 -07:00
Arnaldo Carvalho de Melo
d0a92be05e [SK_BUFF]: Introduce arp_hdr(), remove skb->nh.arph
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:12 -07:00
Arnaldo Carvalho de Melo
eddc9ec53b [SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:10 -07:00
Stephen Hemminger
f690808e17 [NET]: make seq_operations const
The seq_file operations stuff can be marked constant to
get it out of dirty cache.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:03 -07:00
Arnaldo Carvalho de Melo
c1d2bbe1cd [SK_BUFF]: Introduce skb_reset_network_header(skb)
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can
later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in
64bit land while possibly keeping it as a pointer on 32bit.

This one touches just the most simple case, next will handle the slightly more
"complex" cases.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:46 -07:00
Stephen Hemminger
132adf5463 [IPV4]: cleanup
Add whitespace around keywords.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:11 -07:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Arjan van de Ven
9a32144e9d [PATCH] mark struct file_operations const 7
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
YOSHIFUJI Hideaki
e905a9edab [NET] IPV4: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:39 -08:00
Al Viro
714e85be35 [IPV6]: Assorted trivial endianness annotations.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:22:50 -08:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00