Commit graph

10390 commits

Author SHA1 Message Date
Herbert Xu
7bb82d9245 gre: Initialise rtnl_link tunnel parameters properly
Brown paper bag error of calling memset with sizeof(p) instead
of sizeof(*p).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-11 12:20:15 -07:00
David S. Miller
f901b64472 ipvs: Add proper dependencies on IP_VS, and fix description header line.
Linus noted a build failure case:

net/netfilter/ipvs/ip_vs_xmit.c: In function 'ip_vs_tunnel_xmit':
net/netfilter/ipvs/ip_vs_xmit.c:616: error: implicit declaration of function 'ip_select_ident'

The proper include file (net/ip.h) is being included in ip_vs_xmit.c to get
that declaration.  So the only possible case where this can happen is if
CONFIG_INET is not enabled.

This seems to be purely a missing dependency in the ipvs/Kconfig file IP_VS
entry.

Also, while we're here, remove the out of date "EXPERIMENTAL" string in the
IP_VS config help header line.  IP_VS no longer depends upon CONFIG_EXPERIMENTAL

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-11 12:18:04 -07:00
Tobias Brunner
1839faab9a af_key: fix SADB_X_SPDDELETE response
When deleting an SPD entry using SADB_X_SPDDELETE, c.data.byid is not
initialized to zero in pfkey_spddelete(). Thus, key_notify_policy()
responds with a PF_KEY message of type SADB_X_SPDDELETE2 instead of
SADB_X_SPDDELETE.

Signed-off-by: Tobias Brunner <tobias.brunner@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10 14:07:03 -07:00
Patrick McHardy
4d74f8ba1f gre: minor cleanups in netlink interface
- use typeful helpers for IFLA_GRE_LOCAL/IFLA_GRE_REMOTE
- replace magic value by FIELD_SIZEOF
- use MODULE_ALIAS_RTNL_LINK macro

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10 12:11:06 -07:00
Patrick McHardy
ba9e64b1c2 gre: fix copy and paste error
The flags are dumped twice, the keys not at all.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10 12:10:30 -07:00
Guo-Fu Tseng
fa3e5b4eb8 tcpv6: fix error with CONFIG_TCP_MD5SIG disabled
This patch fix error with CONFIG_TCP_MD5SIG disabled.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 21:11:56 -07:00
Eric Dumazet
f24d43c07e udp: complete port availability checking
While looking at UDP port randomization, I noticed it
was litle bit pessimistic, not looking at type of sockets
(IPV6/IPV4) and not looking at bound addresses if any.

We should perform same tests than when binding to a
specific port.

This permits a cleanup of udp_lib_get_port()

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:51:27 -07:00
Ilpo Järvinen
626e264dd1 tcpv6: combine tcp_v6_send_(reset|ack)
$ codiff tcp_ipv6.o.old tcp_ipv6.o.new
net/ipv6/tcp_ipv6.c:
  tcp_v6_md5_hash_hdr | -144
  tcp_v6_send_ack     | -585
  tcp_v6_send_reset   | -540
 3 functions changed, 1269 bytes removed, diff: -1269

net/ipv6/tcp_ipv6.c:
  tcp_v6_send_response | +791
 1 function changed, 791 bytes added, diff: +791

tcp_ipv6.o.new:
 4 functions changed, 791 bytes added, 1269 bytes removed, diff: -478

I choose to leave the reset related netns comment in place (not
the one that is killed) as I cannot understand its English so
it's a bit hard for me to evaluate its usefulness :-).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:42:40 -07:00
Ilpo Järvinen
81ada62d70 tcpv6: convert opt[] -> topt in tcp_v6_send_reset
after this I get:

$ diff-funcs tcp_v6_send_reset tcp_ipv6.c tcp_ipv6.c tcp_v6_send_ack
 --- tcp_ipv6.c:tcp_v6_send_reset()
 +++ tcp_ipv6.c:tcp_v6_send_ack()
@@ -1,4 +1,5 @@
-static void tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb)
+static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
u32 ts,
+                           struct tcp_md5sig_key *key)
 {
        struct tcphdr *th = tcp_hdr(skb), *t1;
        struct sk_buff *buff;
@@ -7,31 +8,14 @@
        struct sock *ctl_sk = net->ipv6.tcp_sk;
        unsigned int tot_len = sizeof(struct tcphdr);
        __be32 *topt;
-#ifdef CONFIG_TCP_MD5SIG
-       struct tcp_md5sig_key *key;
-#endif
-
-       if (th->rst)
-               return;
-
-       if (!ipv6_unicast_destination(skb))
-               return;

+       if (ts)
+               tot_len += TCPOLEN_TSTAMP_ALIGNED;
 #ifdef CONFIG_TCP_MD5SIG
-       if (sk)
-               key = tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr);
-       else
-               key = NULL;
-
        if (key)
                tot_len += TCPOLEN_MD5SIG_ALIGNED;
 #endif

-       /*
-        * We need to grab some memory, and put together an RST,
-        * and then put it into the queue to be sent.
-        */
-
        buff = alloc_skb(MAX_HEADER + sizeof(struct ipv6hdr) + tot_len,
                         GFP_ATOMIC);
        if (buff == NULL)
@@ -46,18 +30,20 @@
        t1->dest = th->source;
        t1->source = th->dest;
        t1->doff = tot_len / 4;
-       t1->rst = 1;
-
-       if(th->ack) {
-               t1->seq = th->ack_seq;
-       } else {
-               t1->ack = 1;
-               t1->ack_seq = htonl(ntohl(th->seq) + th->syn + th->fin
-                                   + skb->len - (th->doff<<2));
-       }
+       t1->seq = htonl(seq);
+       t1->ack_seq = htonl(ack);
+       t1->ack = 1;
+       t1->window = htons(win);

        topt = (__be32 *)(t1 + 1);

+       if (ts) {
+               *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+                               (TCPOPT_TIMESTAMP << 8) |
TCPOLEN_TIMESTAMP);
+               *topt++ = htonl(tcp_time_stamp);
+               *topt++ = htonl(ts);
+       }
+
 #ifdef CONFIG_TCP_MD5SIG
        if (key) {
                *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
@@ -84,15 +70,10 @@
        fl.fl_ip_sport = t1->source;
        security_skb_classify_flow(skb, &fl);

-       /* Pass a socket to ip6_dst_lookup either it is for RST
-        * Underlying function will use this to retrieve the network
-        * namespace
-        */
        if (!ip6_dst_lookup(ctl_sk, &buff->dst, &fl)) {
                if (xfrm_lookup(&buff->dst, &fl, NULL, 0) >= 0) {
                        ip6_xmit(ctl_sk, buff, &fl, NULL, 0);
                        TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
-                       TCP_INC_STATS_BH(net, TCP_MIB_OUTRSTS);
                        return;
                }
        }


...which starts to be trivial to combine.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:42:01 -07:00
Ilpo Järvinen
77c676da1b tcpv6: trivial formatting changes to send_(ack|reset)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:41:38 -07:00
Ilpo Järvinen
78e645cb89 tcpv[46]: fix md5 pseudoheader address field ordering
Maybe it's just me but I guess those md5 people made a mess
out of it by having *_md5_hash_* to use daddr, saddr order
instead of the one that is natural (and equal to what csum
functions use). For the segment were sending, the original
addresses are reversed so buff's saddr == skb's daddr and
vice-versa.

Maybe I can finally proceed with unification of some code
after fixing it first... :-)

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:37:47 -07:00
Vlad Yasevich
a1080a8b0b sctp: update SNMP statiscts when T5 timer expired.
The T5 timer is the timer for the over-all shutdown procedure.  If
this timer expires, then shutdown procedure has not completed and we
ABORT the association.  We should update SCTP_MIB_ABORTED and
SCTP_MIB_CURRESTAB  when aborting.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:33:26 -07:00
Vlad Yasevich
56eb82bb8d sctp: Fix SNMP number of SCTP_MIB_ABORTED during violation handling.
If ABORT chunks require authentication and a protocol violation
is triggered, we do not tear down the association.  Subsequently,
we should not increment SCTP_MIB_ABORTED.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:33:01 -07:00
Wei Yongjun
3d5a019d57 sctp: Fix the SNMP number of SCTP_MIB_CURRESTAB
RFC3873 defined SCTP_MIB_CURRESTAB:
  sctpCurrEstab OBJECT-TYPE
    SYNTAX         Gauge32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
         "The number of associations for which the current state is
         either ESTABLISHED, SHUTDOWN-RECEIVED or SHUTDOWN-PENDING."
    REFERENCE
         "Section 4 in RFC2960 covers the SCTP   Association state
         diagram."

If the T4 RTO timer expires many times(timeout), the association will enter
CLOSED state, so we should dec the number of SCTP_MIB_CURRESTAB, not inc the
number of SCTP_MIB_CURRESTAB.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 14:32:24 -07:00
Herbert Xu
64194c31a0 inet: Make tunnel RX/TX byte counters more consistent
This patch makes the RX/TX byte counters for IPIP, GRE and SIT more
consistent.  Previously we included the external IP headers on the
way out but not when the packet is inbound.

The new scheme is to count payload only in both directions.  For
IPIP and SIT this simply means the exclusion of the external IP
header.  For GRE this means that we exclude the GRE header as
well.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 12:03:17 -07:00
Herbert Xu
e1a8000228 gre: Add Transparent Ethernet Bridging
This patch adds support for Ethernet over GRE encapsulation.
This is exposed to user-space with a new link type of "gretap"
instead of "gre".  It will create an ARPHRD_ETHER device in
lieu of the usual ARPHRD_IPGRE.

Note that to preserver backwards compatibility all Transparent
Ethernet Bridging packets are passed to an ARPHRD_IPGRE tunnel
if its key matches and there is no ARPHRD_ETHER device whose
key matches more closely.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 12:00:17 -07:00
Herbert Xu
c19e654ddb gre: Add netlink interface
This patch adds a netlink interface that will eventually displace
the existing ioctl interface.  It utilises the elegant rtnl_link_ops
mechanism.

This also means that user-space no longer needs to rely on the
tunnel interface being of type GRE to identify GRE tunnels.  The
identification can now occur using rtnl_link_ops.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 11:59:55 -07:00
Herbert Xu
42aa916265 gre: Move MTU setting out of ipgre_tunnel_bind_dev
This patch moves the dev->mtu setting out of ipgre_tunnel_bind_dev.
This is in prepartion of using rtnl_link where we'll need to make
the MTU setting conditional on whether the user has supplied an
MTU.  This also requires the move of the ipgre_tunnel_bind_dev
call out of the dev->init function so that we can access the user
parameters later.

This patch also adds a check to prevent setting the MTU below
the minimum of 68.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 11:59:32 -07:00
Herbert Xu
c95b819ad7 gre: Use needed_headroom
Now that we have dev->needed_headroom, we can use it instead of
having a bogus dev->hard_header_len.  This also allows us to
include dev->hard_header_len in the MTU computation so that when
we do have a meaningful hard_harder_len in future it is included
automatically in figuring out the MTU.

Incidentally, this fixes a bug where we ignored the needed_headroom
field of the underlying device in calculating our own hard_header_len.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09 11:58:54 -07:00
David S. Miller
45cec1bac0 dsa: Need to select PHYLIB.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:33:01 -07:00
Lennert Buytenhek
2e16a77e1e dsa: add support for the Marvell 88E6060 switch chip
Add support for the Marvell 88E6060 switch chip.  This chip only
supports the Header and Trailer tagging formats, and we use it in
Trailer mode since that mode is slightly easier to handle than
Header mode.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Byron Bradley <byron.bbradley@gmail.com>
Tested-by: Tim Ellis <tim.ellis@mac.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:24:22 -07:00
Lennert Buytenhek
396138f03f dsa: add support for Trailer tagging format
This adds support for the Trailer switch tagging format.  This is
another tagging that doesn't explicitly mark tagged packets with a
distinct ethertype, so that we need to add a similar hack in the
receive path as for the Original DSA tagging format.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Byron Bradley <byron.bbradley@gmail.com>
Tested-by: Tim Ellis <tim.ellis@mac.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:24:16 -07:00
Lennert Buytenhek
2e5f032095 dsa: add support for the Marvell 88E6131 switch chip
Add support for the Marvell 88E6131 switch chip.  This chip only
supports the original (ethertype-less) DSA tagging format.

On the 88E6131, there is a PHY Polling Unit (PPU) which has exclusive
access to each of the PHYs's MII management registers.  If we want to
talk to the PHYs from software, we have to disable the PPU and wait
for it to complete its current transaction before we can do so, and we
need to re-enable the PPU afterwards to make sure that the switch will
notice changes in link state and speed on the individual ports as they
occur.

Since disabling the PPU is rather slow, and since MII management
accesses are typically done in bursts, this patch keeps the PPU disabled
for 10ms after a software access completes.  This makes handling the
PPU slightly more complex, but speeds up something like running ethtool
on one of the switch slave interfaces from ~300ms to ~30ms on typical
hardware.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Nicolas Pitre <nico@marvell.com>
Tested-by: Peter van Valderen <linux@ddcrew.com>
Tested-by: Dirk Teurlings <dirk@upexia.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:24:09 -07:00
Lennert Buytenhek
cf85d08fdf dsa: add support for original DSA tagging format
Most of the DSA switches currently in the field do not support the
Ethertype DSA tagging format that one of the previous patches added
support for, but only the original DSA tagging format.

The original DSA tagging format carries the same information as the
Ethertype DSA tagging format, but with the difference that it does not
have an ethertype field.  In other words, when receiving a packet that
is tagged with an original DSA tag, there is no way of telling in
eth_type_trans() that this packet is in fact a DSA-tagged packet.

This patch adds a hook into eth_type_trans() which is only compiled in
if support for a switch chip that doesn't support Ethertype DSA is
selected, and which checks whether there is a DSA switch driver
instance attached to this network device which uses the old tag format.
If so, it sets the protocol field to ETH_P_DSA without looking at the
packet, so that the packet ends up in the right place.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Nicolas Pitre <nico@marvell.com>
Tested-by: Peter van Valderen <linux@ddcrew.com>
Tested-by: Dirk Teurlings <dirk@upexia.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:19:56 -07:00
Lennert Buytenhek
91da11f870 net: Distributed Switch Architecture protocol support
Distributed Switch Architecture is a protocol for managing hardware
switch chips.  It consists of a set of MII management registers and
commands to configure the switch, and an ethernet header format to
signal which of the ports of the switch a packet was received from
or is intended to be sent to.

The switches that this driver supports are typically embedded in
access points and routers, and a typical setup with a DSA switch
looks something like this:

	+-----------+       +-----------+
	|           | RGMII |           |
	|           +-------+           +------ 1000baseT MDI ("WAN")
	|           |       |  6-port   +------ 1000baseT MDI ("LAN1")
	|    CPU    |       |  ethernet +------ 1000baseT MDI ("LAN2")
	|           |MIImgmt|  switch   +------ 1000baseT MDI ("LAN3")
	|           +-------+  w/5 PHYs +------ 1000baseT MDI ("LAN4")
	|           |       |           |
	+-----------+       +-----------+

The switch driver presents each port on the switch as a separate
network interface to Linux, polls the switch to maintain software
link state of those ports, forwards MII management interface
accesses to those network interfaces (e.g. as done by ethtool) to
the switch, and exposes the switch's hardware statistics counters
via the appropriate Linux kernel interfaces.

This initial patch supports the MII management interface register
layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and
supports the "Ethertype DSA" packet tagging format.

(There is no officially registered ethertype for the Ethertype DSA
packet format, so we just grab a random one.  The ethertype to use
is programmed into the switch, and the switch driver uses the value
of ETH_P_EDSA for this, so this define can be changed at any time in
the future if the one we chose is allocated to another protocol or
if Ethertype DSA gets its own officially registered ethertype, and
everything will continue to work.)

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Nicolas Pitre <nico@marvell.com>
Tested-by: Byron Bradley <byron.bbradley@gmail.com>
Tested-by: Tim Ellis <tim.ellis@mac.com>
Tested-by: Peter van Valderen <linux@ddcrew.com>
Tested-by: Dirk Teurlings <dirk@upexia.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:15:19 -07:00
David S. Miller
4dd565134e Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/e1000e/ich8lan.c
	drivers/net/e1000e/netdev.c
2008-10-08 14:56:41 -07:00
Sven Wegener
071d7ab664 ipvs: Remove stray file left over from ipvs move
Commit cb7f6a7b71 ("IPVS: Move IPVS to
net/netfilter/ipvs") has left a stray file in the old location of ipvs.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 14:41:35 -07:00
Ilpo Järvinen
53b125779f tcpv6: fix option space offsets with md5
More breakage :-), part of timestamps just were previously
overwritten.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 14:36:33 -07:00
David S. Miller
db2bf2476b Merge branch 'lvs-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/lvs-2.6
Conflicts:

	net/netfilter/Kconfig
2008-10-08 14:26:36 -07:00
Vlad Yasevich
02015180e2 sctp: shrink sctp_tsnmap some more by removing gabs array
The gabs array in the sctp_tsnmap structure is only used
in one place, sctp_make_sack().  As such, carrying the
array around in the sctp_tsnmap and thus directly in
the sctp_association is rather pointless since most
of the time it's just taking up space.  Now, let
sctp_make_sack create and populate it and then throw
it away when it's done.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 14:19:01 -07:00
Vlad Yasevich
8e1ee18c33 sctp: Rework the tsn map to use generic bitmap.
The tsn map currently use is 4K large and is stuck inside
the sctp_association structure making memory references REALLY
expensive.  What we really need is at most 4K worth of bits
so the biggest map we would have is 512 bytes.   Also, the
map is only really usefull when we have gaps to store and
report.  As such, starting with minimal map of say 32 TSNs (bits)
should be enough for normal low-loss operations.  We can grow
the map by some multiple of 32 along with some extra room any
time we receive the TSN which would put us outside of the map
boundry.  As we close gaps, we can shift the map to rebase
it on the latest TSN we've seen.  This saves 4088 bytes per
association just in the map alone along savings from the now
unnecessary structure members.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 14:18:39 -07:00
Eric Dumazet
3c689b7320 inet: cleanup of local_port_range
I noticed sysctl_local_port_range[] and its associated seqlock
sysctl_local_port_range_lock were on separate cache lines.
Moreover, sysctl_local_port_range[] was close to unrelated
variables, highly modified, leading to cache misses.

Moving these two variables in a structure can help data
locality and moving this structure to read_mostly section
helps sharing of this data among cpus.

Cleanup of extern declarations (moved in include file where
they belong), and use of inet_get_local_port_range()
accessor instead of direct access to ports values.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 14:18:04 -07:00
Eric Dumazet
9088c56095 udp: Improve port randomization
Current UDP port allocation is suboptimal.
We select the shortest chain to chose a port (out of 512)
that will hash in this shortest chain.

First, it can lead to give not so ramdom ports and ease
give attackers more opportunities to break the system.

Second, it can consume a lot of CPU to scan all table
in order to find the shortest chain.

Third, in some pathological cases we can fail to find
a free port even if they are plenty of them.

This patch zap the search for a short chain and only
use one random seed. Problem of getting long chains
should be addressed in another way, since we can
obtain long chains with non random ports.

Based on a report and patch from Vitaly Mayatskikh

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:44:17 -07:00
Jarek Poplawski
53e9150349 pkt_sched: Update qdisc requeue stats in dev_requeue_skb()
After the last change of requeuing there is no info about such
incidents in tc stats. This patch updates the counter, but we should
consider this should differ from previous stats because of additional
checks preventing to repeat this. On the other hand, previous stats
didn't include requeuing of gso_segmented skbs.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:36:22 -07:00
Ilpo Järvinen
52cd5750e8 tcp: fix length used for checksum in a reset
While looking for some common code I came across difference
in checksum calculation between tcp_v6_send_(reset|ack) I
couldn't explain. I checked both v4 and v6 and found out that
both seem to have the same "feature". I couldn't find anything
in rfc nor anywhere else which would state that md5 option
should be ignored like it was in case of reset so I came to
a conclusion that this is probably a genuine bug. I suspect
that addition of md5 just was fooled by the excessive
copy-paste code in those functions and the reset part was
never tested well enough to find out the problem.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:34:06 -07:00
Denis V. Lunev
2ca89cea5c ipv6: remove unused not init_ipv6_mibs/cleanup_ipv6_mibs
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:17:07 -07:00
Denis V. Lunev
9261e53701 ipv6: making ip and icmp statistics per/namespace
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:16:45 -07:00
Denis V. Lunev
55d43808eb ipv6: added net argument to ICMP6MSGIN_INC_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:15:46 -07:00
Denis V. Lunev
5a57d4c7fd ipv6: added net argument to ICMP6MSGOUT_INC_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:15:05 -07:00
Denis V. Lunev
5c5d244bd3 ipv6: added net argument to ICMP6MSGOUT_INC_STATS
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:14:44 -07:00
Denis V. Lunev
e41b5368e0 ipv6: added net argument to ICMP6_INC_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:14:13 -07:00
Denis V. Lunev
a862f6a6dc ipv6: added net argument to ICMP6_INC_STATS
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:13:58 -07:00
Denis V. Lunev
821d57776d ipv6: added net argument to IP6_ADD_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:13:31 -07:00
Denis V. Lunev
483a47d2fe ipv6: added net argument to IP6_INC_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:09:27 -07:00
Denis V. Lunev
3bd653c845 netns: add net parameter to IP6_INC_STATS
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 10:54:51 -07:00
Denis V. Lunev
98b3377ca7 ipv6: consolidate error paths in ipv6_frag_rcv
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 10:53:30 -07:00
Denis V. Lunev
0b0588d42b ipv6: local dev is actually unused in ip6_fragment
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 10:52:42 -07:00
David S. Miller
364ae953a4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2008-10-08 09:50:38 -07:00
Jan Engelhardt
f39a9410ed netfilter: xtables: remove bogus mangle table dependency of connmark
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2008-10-08 11:35:20 +02:00
Jan Engelhardt
ab4f21e6fb netfilter: xtables: use NFPROTO_UNSPEC in more extensions
Lots of extensions are completely family-independent, so squash some code.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2008-10-08 11:35:20 +02:00