Some are never used, some are set but never read, dev_hoq_count is
incremented and decremented, but never read.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
SBC-3 says:
A TRANSFER LENGTH field set to zero specifies that 256 logical
blocks shall be written. Any other value specifies the number
of logical blocks that shall be written.
The old code was always just returning the value in the TRANSFER LENGTH
byte. Fix this to return 256 if the byte is 0.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
IO commands with a TRANSFER LENGTH of 0 are not an error; for example,
for READ (10) and WRITE (10), SBC-3 says:
A TRANSFER LENGTH field set to zero specifies that no logical blocks
shall be read. This condition shall not be considered an error.
In case we have nothing to do, just complete the command with good status.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch changes transport_generic_map_mem_to_cmd() to reject SCSI data
overflow and to send exception status with CHECK_CONDITION + TCM_INVALID_CDB_FIELD
for fabrics that are passing a pre-populated struct scatterlist (eg: tcm_loop
and iscsi-target) being mapped into se_cmd->t_data_sg and se_cmd->t_data_nents.
This addresses an OOPs where transport_allocate_data_tasks() would walk
the incorrect post OVERFLOW cmd->data_length value beyond the end of
the passed scatterlist.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We never walk ordered_cmd_list in the se_device, so remove all code related
to supporting it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We already have a perfectly valid se_device pointer in the command, so
remove the mostly useless duplicates.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
While testing ib_srpt I noticed that the target system became
rather unresponsive during intensive I/O. The patch below made
my target system responsive again during I/O without decreasing
performance.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number
of locations and addresses cases where transport_generic_request_failure()
was returning the incorrect sense upon CHECK_CONDITION status after the
v3.1 converson to use errno return codes.
This includes the conversion of transport_generic_request_failure() to
process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT
before calling transport_send_check_condition_and_sense() to queue up
response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy
usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response
for these cases.
transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend
SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have
all been updated to set se_cmd->scsi_sense_reason and return errno codes
universally upon failure. This includes cmd->scsi_sense_reason assignment
in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code.
Finally it updates fabric modules to remove the legacy usage, and for
TFO->new_cmd_map() callers forwards return values outside of fabric code.
iscsi-target has also been updated to remove a handful of special cases
related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending()
(v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from
transport_generic_new_cmd, and re-add missing task->task_error_status
assignment in transport_complete_task)
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
Instead of calling into transport_emulate_control_cdb from
__transport_execute_tasks for some CDBs always set up ->exectute_tasks
in the command sequence and use it uniformly.
(nab: Add default passthrough break for SERVICE_ACTION_IN)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
All ->execute_task instances now need to complete the I/O explicitly,
which can either happen synchronously or asynchronously.
Note that a lot of the CDB emulations appear to return success even if
some lowlevel operations failed. Given that this is an existing issue
this patch doesn't change that fact.
(nab: Adding missing switch breaks in PR-IN + PR_OUT)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We want to be able to handle all CDBs through it and remove hacks like
always using the first task in a CDB in target_report_luns.
Also rename the callback to ->execute_task to better describe its use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Split core_scsi2_emulate_crh into one routine each for the
PERSISTENT_RESERVE_IN and PERSISTENT_RESERVE_OUT side.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Split core_scsi2_emulate_crh into one routine each for the reserve and
release side. The common code now is in a helper called by both
routines.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch adds the initial pieces of generic active I/O shutdown logic.
This is intended to be a 'opt-in' feature for fabric modules that
includes the following functions to provide a mechinism for fabric
modules to track se_cmd via se_session->sess_cmd_list:
*) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called
from fabric module incoming I/O path.
*) target_put_sess_cmd() - Check for completion or drop se_cmd from
->sess_cmd_list
*) target_splice_sess_cmd_list() - Splice active I/O list from
->sess_cmd_list to ->sess_wait_list, can called with HW fabric
lock held.
*) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on
individual ->cmd_wait_comp. Optional transport_wait_for_tasks()
call.
target_splice_sess_cmd_list() is allowed to be called under HW fabric
lock, and performs the splice into se_sess->sess_wait_list and set
se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list
waiting for individual target_put_sess_cmd() fabric callbacks to
complete.
It also adds TFO->check_release_cmd() to split the completion and memory
release calls, where a fabric module uses target_put_sess_cmd() to check
for I/O completion during session shutdown. This is currently pushed out
into fabric modules as current fabric code may sleep here waiting for
TFO->check_stop_free() to complete in main response path, and because
target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric
descriptor memory directly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
The commit
target: use a workqueue for I/O completions
accidentally removed setting t_tasks_failed in transport_complete_task.
Add it back in a slightly cleaner way; now it is set for every failed task
instead of special casing the last one completing by using the success
argument directly for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
This patch drops TRANSPORT_FREE_CMD_INTR usage from target core, which
includes the removal of transport_generic_free_cmd_intr() symbol,
TRANSPORT_FREE_CMD_INTR usage in transport_processing_thread(), and
special case LUN_RESET handling to skip TRANSPORT_FREE_CMD_INTR processing
in core_tmr_drain_cmd_list(). We now expect that fabric modules will
use an internal workqueue to provide process context when releasing
se_cmd descriptor resources via transport_generic_free_cmd().
Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Madhuranath Iyengar <mni@risingtidesystems.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
This patch converts target_core_fabric_ops->check_stop_free() usage in
transport_cmd_check_stop() and associated fabric module usage to
return '1' when the passed se_cmd has been released directly within
->check_stop_free(), or return '0' when the passed se_cmd has not
been released.
This addresses an issue where transport_cmd_finish_abort() ->
transport_cmd_check_stop_to_fabric() was leaking descriptors during
LUN_RESET for modules using ->check_stop_free(), but not directly
releasing se_cmd in all cases.
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
This patch changes target core to also check for -ENOMEM from fabric callbacks
to signal QUEUE_FULL status, instead of just -EAGAIN in order to catch a
larger set of fabric failure cases that want to trigger QUEUE_FULL logic.
This includes the callbacks for ->write_pending(), ->queue_data_in() and
->queue_status().
It also makes transport_generic_write_pending() return zero upon QUEUE_FULL,
and removes two unnecessary -EAGAIN checks to catch write pending QUEUE_FULL
cases from transport_generic_new_cmd() failures in transport_handle_cdb_direct()
and transport_processing_thread():TRANSPORT_NEW_CMD_MAP state.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
This patch removes the legacy usage of se_task->task_timer and associated
infrastructure that originally was used as a way to help manage buggy backend
SCSI LLDs that in certain cases would never return back an outstanding task.
This includes the removal of target_complete_timeout_work(), timeout logic
from transport_complete_task(), transport_task_timeout_handler(),
transport_start_task_timer(), the per device task_timeout configfs attribute,
and all task_timeout associated structure members and defines in
target_core_base.h
This is being removed in preparation to make transport_complete_task() run
in lock-less mode.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch converts target-core to use se_cmd->t_transport_sent instead of
a duplicated se_cmd->transport_sent member in a handful of locations.
It also updates iscsi_target to properly use ->t_transport_sent instead of
it's own iscsi_cmd_t->transport_sent value that was not being assigned.
Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If we only have a single task per command (which at least in my testing
is the by far most common case) we do not have to allocate a new per-task
S/G list but can reuse the one from the command.
(nab: Fix BIDI handling in transport_free_dev_tasks)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a bug for BIDI handling in transport_generic_new_cmd() where
cmd->t_task_cdbs_left and Co. where not taking into account the extra
task count generated during the first call to transport_allocate_data_tasks().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
There were only two callers, and one of them always wants the call
to transport_allocate_data_tasks anyway. Also drop the constant
lba argument to transport_allocate_data_tasks and move the variables
inside it into the minimum required scope.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
These are two fairly small functions, and merging them gives a much
more readable control flow, and opportunities for more useful comments.
It also moves all code related to resources allocation closer together
and allows to remove a forward declaration for transport_allocate_tasks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This field is never used given that BIDI handling happens at the
command and not the task level. Remove it and the dead code in
pscsi that tries to work on it.
It also prevents pSCSI passthrough for the two currently enabled BIDI
commands now that task->task_sg_bidi support has been removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Remove the now unnecessary extra call to transport_subsystem_check_init() in
target_core_register_fabric(), and also merge transport_subsystem_reqmods()
directly into transport_subsystem_check_init().
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Instead of abusing the target processing thread for offloading I/O
completion in the backends to user context add a new workqueue. This means
completions can be processed as fast as available CPU time allows it,
including in parallel with other completions and more importantly I/O
submission or QUEUE FULL retries. This should give much better performance
especially on loaded systems.
As a fallout we can merge all the completed states into a single
one.
On the downside this change complicates lun reset handling a bit by
requiring us to cancel a work item only for those states that have it
initialized. The alternative would be to either always initialize the work
item to a dummy handler, or always use the same handler and do a switch on
the state. The long term solution will be a flag that says that the command
has an initialized work item, but that's only going to be useful once we
have more users.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We never check for this state, and it makes testing for a completed
state much harder given that it overrides the existing state.
Also remove the unused deferred_t_state which is related to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We never queue an command with this state, and only set it in a completely
bogus place in tcm_fc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We only need to decrement dev->depth_left if failing a command from
__transport_execute_tasks. Instead of doing it first thing in
transport_generic_request_failure and requiring a pseudo-flag argument
for it just opencode the decrement in the two callers (which should
be factored into a single one anyway)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Currently we stop the timers for all tasks in a command fairly late during
I/O completion, which is fairly pointless and requires all kinds of safety
checks.
Instead delete pending timers early on in transport_complete_task, thus
ensuring no new timers firest after that. We take t_state_lock a bit later
in that function thus making sure currenly running timers are out of the
criticial section. To be completely sure the timer has finished we also
add another del_timer_sync call when freeing the task.
This also allows removing TF_TIMER_RUNNING as it would be equivalent
to TF_ACTIVE now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
TF_TIMER_STOP is useless as it only helps to mitigate a tiny race during
deleting the timer. But given that we have cleared TF_ACTIVE at this point
we already have another mitigation a few lines down the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
list_for_each_entry_safe only protects against deletions from the list,
but not against any concurrent modifications. Given that we drop
t_state_lock inside the loop it is not safe in transport_free_dev_tasks.
Instead of use a local dispose_list that we move all tasks that are
to be deleted to. This is safe because we never do list_emptry checks
on t_list to check if a command is on the list anywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Change one remaining user of transport_cmd_check_stop(cmd, 2, 0) to the
transport_cmd_check_stop_to_fabric wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We always operated on the same queue, so move finding it into the function,
just like we do for all other helpers operating on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Add a new boolean at_head parameter to transport_add_cmd_to_queue and thus
obsolete the SCF_EMULATE_QUEUE_FULL flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Remove the need for the transport_qf_callback callback by making
sure we have specific states with specific handlers for the two
queue full cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Add a switch statement implementing the CDB LBA/len update directly
in target_get_task_cdb and remove the old ->transport_split_cdb
callback and all its implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Instead of calling out to the backends from the core to get a per-task
CDB and then modify it for the LBA/len pair used for this CDB provide
a helper that writes the adjusted CDB into a provided buffer and call
this method from ->do_task in pscsi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The most commonly used file, iblock and rd backends have no use for
a per-task CDB and thus don't need a method to copy it into their
otherwise unused CDB fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This is a squashed version of the following unnecessary se_task structure
member removal patches:
target: remove the task_execute_queue field in se_task
Instead of using a separate flag we can simply do list_emptry checks
on t_execute_list if we make sure to always use list_del_init to remove
a task from the list. Also factor some duplicate code into a new
__transport_remove_task_from_execute_queue helper.
target: remove the read-only task_no field in se_task
The task_no field never was initialized and only used in debug printks,
so kill it.
target: remove the task_padded_sg field in se_task
This field is only check in one place and not actually needed there.
Rationale:
- transport_do_task_sg_chain asserts that we have task_sg_chaining
set early on
- we only make use of the sg_prev_nents field we calculate based on it
if there is another sg list that gets chained onto this one, which
never happens for the last (or only) task.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Replace various atomic_t variables that were mostly under t_state_lock
with new flags in task_flags. Note that the execution error path
didn't take t_state_lock before, so add it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This is a squashed version of the following se_task cleanup patches:
target: remove the unused task_state_flags field in se_task
target: remove the unused se_obj_ptr field in se_task
target: remove the se_dev field in se_task
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This is a squashed version of the following target_core_base.h
cleanup patches:
target: remove the unused SHUTDOWN_SIGS defintion
target: remove unused se_mem leftovers
target: remove the unused map_func_t typedef
target: move TRANSPORT_IOV_DATA_BUFFER to the iscsi-specific code
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Jörn Engel