If you truncated an mmap'ed hugetlbfs file, then faulted on the truncated
area, /proc/meminfo's HugePages_Rsvd wrapped hugely "negative". Reinstate my
preliminary i_size check before attempting to allocate the page (though this
only fixes the most obvious case: more work will be needed here).
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If __vmalloc is called to allocate memory with GFP_ATOMIC in atomic
context, the chain of calls results in __get_vm_area_node allocating memory
for vm_struct with GFP_KERNEL, causing the 'sleeping from invalid context'
warning. This patch fixes it by passing the gfp flags along so
__get_vm_area_node allocates memory for vm_struct with the same flags.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add __GFP_NOWARN flag to calling of __alloc_pages() in
__kmalloc_section_memmap(). It can reduce noisy failure message.
In ia64, section size is 1 GB, this means that order 8 pages are necessary
for each section's memmap. It is often very hard requirement under heavy
memory pressure as you know. So, __alloc_pages() gives up allocation and
shows many noisy stack traces which means no page for each sections.
(Current my environment shows 32 times of stack trace....)
But, __kmalloc_section_memmap() calls vmalloc() after failure of it, and it
can succeed allocation of memmap. So, its stack trace warning becomes just
noisy. I suppose it shouldn't be shown.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If try_to_free_pages / balance_pgdat are called with a gfp_mask specifying
GFP_IO and/or GFP_FS, they will reclaim the requisite number of pages, and the
reset prev_priority to DEF_PRIORITY (or to some other high (ie: unurgent)
value).
However, another reclaimer without those gfp_mask flags set (say, GFP_NOIO)
may still be struggling to reclaim pages. The concurrent overwrite of
zone->prev_priority will cause this GFP_NOIO thread to unexpectedly cease
deactivating mapped pages, thus causing reclaim difficulties.
Fix this is to key the distress calculation not off zone->prev_priority, but
also take into account the local caller's priority by using
min(zone->prev_priority, sc->priority)
Signed-off-by: Martin J. Bligh <mbligh@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The temp_priority field in zone is racy, as we can walk through a reclaim
path, and just before we copy it into prev_priority, it can be overwritten
(say with DEF_PRIORITY) by another reclaimer.
The same bug is contained in both try_to_free_pages and balance_pgdat, but
it is fixed slightly differently. In balance_pgdat, we keep a separate
priority record per zone in a local array. In try_to_free_pages there is
no need to do this, as the priority level is the same for all zones that we
reclaim from.
Impact of this bug is that temp_priority is copied into prev_priority, and
setting this artificially high causes reclaimers to set distress
artificially low. They then fail to reclaim mapped pages, when they are,
in fact, under severe memory pressure (their priority may be as low as 0).
This causes the OOM killer to fire incorrectly.
From: Andrew Morton <akpm@osdl.org>
__zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority
is used in the decision whether or not to bring mapped pages onto the inactive
list. Hence there's a risk here that __zone_reclaim() will fail because
zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up
stuck on the active list.
Fix that up by decreasing (ie making more urgent) zone->prev_priority as
__zone_reclaim() scans the zone's pages.
This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be
possible to remove that now, and to just start out at DEF_PRIORITY?
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Consolidate page_cache_alloc
- Fix splice: only the pagecache pages and filesystem data need to use
mapping_gfp_mask.
- Fix grab_cache_page_nowait: same as splice, also honour NUMA placement.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The zonelist may contain zones of nodes that have not been bootstrapped and
we will oops if we try to allocate from those zones. So check if the node
information for the slab and the node have been setup before attempting an
allocation. If it has not been setup then skip that zone.
Usually we will not encounter this situation since the slab bootstrap code
avoids falling back before we have setup the respective nodes but we seem
to have a special needs for pppc.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Kravetz <kravetz@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reintroduce NODES_SPAN_OTHER_NODES for powerpc
Revert "[PATCH] Remove SPAN_OTHER_NODES config definition"
This reverts commit f62859bb68.
Revert "[PATCH] mm: remove arch independent NODES_SPAN_OTHER_NODES"
This reverts commit a94b3ab7ea.
Also update the comments to indicate that this is still required
and where its used.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Kravetz <kravetz@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] Remove SUID when splicing into an inode
[PATCH] Add lockless helpers for remove_suid()
[PATCH] Introduce generic_file_splice_write_nolock()
[PATCH] Take i_mutex in splice_from_pipe()
--=-=-=
from mm/memory.c:
1434 static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va)
1435 {
1436 /*
1437 * If the source page was a PFN mapping, we don't have
1438 * a "struct page" for it. We do a best-effort copy by
1439 * just copying from the original user address. If that
1440 * fails, we just zero-fill it. Live with it.
1441 */
1442 if (unlikely(!src)) {
1443 void *kaddr = kmap_atomic(dst, KM_USER0);
1444 void __user *uaddr = (void __user *)(va & PAGE_MASK);
1445
1446 /*
1447 * This really shouldn't fail, because the page is there
1448 * in the page tables. But it might just be unreadable,
1449 * in which case we just give up and fill the result with
1450 * zeroes.
1451 */
1452 if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE))
1453 memset(kaddr, 0, PAGE_SIZE);
1454 kunmap_atomic(kaddr, KM_USER0);
#### D-cache have to be flushed here.
#### It seems it is just forgotten.
1455 return;
1456
1457 }
1458 copy_user_highpage(dst, src, va);
#### Ok here. flush_dcache_page() called from this func if arch need it
1459 }
Following is the patch fix this issue:
Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Qooting Adrian:
- net/sunrpc/svc.c uses highest_possible_node_id()
- include/linux/nodemask.h says highest_possible_node_id() is
out-of-line #if MAX_NUMNODES > 1
- the out-of-line highest_possible_node_id() is in lib/cpumask.c
- lib/Makefile: lib-$(CONFIG_SMP) += cpumask.o
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y, CONFIG_SMP=n, CONFIG_SUNRPC=y
-> highest_possible_node_id() is used in net/sunrpc/svc.c
CONFIG_NODES_SHIFT defined and > 0
-> include/linux/numa.h: MAX_NUMNODES > 1
-> compile error
The bug is not present on architectures where ARCH_DISCONTIGMEM_ENABLE
depends on NUMA (but m32r isn't the only affected architecture).
So move the function into page_alloc.c
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Despite mm.h is not being exported header, it does contain one thing
which is part of userspace ABI -- value disabling OOM killer for given
process. So,
a) create and export include/linux/oom.h
b) move OOM_DISABLE define there.
c) turn bounding values of /proc/$PID/oom_adj into defines and export
them too.
Note: mass __KERNEL__ removal will be done later.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Separate out the concept of "queue congestion" from "backing-dev congestion".
Congestion is a backing-dev concept, not a queue concept.
The blk_* congestion functions are retained, as wrappers around the core
backing-dev congestion functions.
This proper layering is needed so that NFS can cleanly use the congestion
functions, and so that CONFIG_BLOCK=n actually links.
Cc: "Thomas Maier" <balagi@justmail.de>
Cc: "Jens Axboe" <jens.axboe@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: David Howells <dhowells@redhat.com>
Cc: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When direct-io falls back to buffered write, it will just leave the dirty data
floating about in pagecache, pending regular writeback.
But normal direct-io semantics are that IO is synchronous, and that it leaves
no pagecache behind.
So change the fallback-to-buffered-write code to sync the file region and to
then strip away the pagecache, just as a regular direct-io write would do.
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Right now users have to grab i_mutex before calling remove_suid(), in the
unlikely event that a call to ->setattr() may be needed. Split up the
function in two parts:
- One to check if we need to remove suid
- One to actually remove it
The first we can call lockless.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
A recent change to the vmalloc() code accidentally resulted in us passing
__GFP_ZERO into the slab allocator. But we only wanted __GFP_ZERO for the
actual pages whcih are being vmalloc()ed, and passing __GFP_ZERO into slab is
not a rational thing to ask for.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We need to encode a decode the 'file' part of a handle. We simply use the
inode number and generation number to construct the filehandle.
The generation number is the time when the file was created. As inode numbers
cycle through the full 32 bits before being reused, there is no real chance of
the same inum being allocated to different files in the same second so this is
suitably unique. Using time-of-day rather than e.g. jiffies makes it less
likely that the same filehandle can be created after a reboot.
In order to be able to decode a filehandle we need to be able to lookup by
inum, which means that the inode needs to be added to the inode hash table
(tmpfs doesn't currently hash inodes as there is never a need to lookup by
inum). To avoid overhead when not exporting, we only hash an inode when it is
first exported. This requires a lock to ensure it isn't hashed twice.
This code is separate from the patch posted in June06 from Atal Shargorodsky
which provided the same functionality, but does borrow slightly from it.
Locking comment: Most filesystems that hash their inodes do so at the point
where the 'struct inode' is initialised, and that has suitable locking
(I_NEW). Here in shmem, we are hashing the inode later, the first time we
need an NFS file handle for it. We no longer have I_NEW to ensure only one
thread tries to add it to the hash table.
Cc: Atal Shargorodsky <atal@codefidence.com>
Cc: Gilad Ben-Yossef <gilad@codefidence.com>
Signed-off-by: David M. Grimes <dgrimes@navisite.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If remove_mapping() failed to remove the page from its mapping, don't go and
mark it not uptodate! Makes kernel go dead.
(Actually, I don't think the ClearPageUptodate is needed there at all).
Says Nick Piggin:
"Right, it isn't needed because at this point the page is guaranteed
by remove_mapping to have no references (except us) and cannot pick
up any new ones because it is removed from pagecache.
We can delete it."
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
.. and clean up the file mapping code while at it. No point in having a
"if (file)" repeated twice, and generally doing similar checks in two
different sections of the same code
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If try_to_release_page() is called with a zero gfp mask, then the
filesystem is effectively denied the possibility of sleeping while
attempting to release the page. There doesn't appear to be any valid
reason why this should be banned, given that we're not calling this from a
memory allocation context.
For this reason, change the gfp_mask argument of the call to GFP_KERNEL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Steve Dickson <SteveD@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A failure in invalidate_inode_pages2_range() can result in unpleasant things
happening in NFS (at least). Stick a WARN_ON_ONCE() in there so we can find
out if it happens, and maybe why.
(akpm: might be a -mm-only patch, we'll see..)
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Steve Dickson <SteveD@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the lock debug checks below the page reserved checks. Also, having
debug_check_no_locks_freed in kernel_map_pages is wrong.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After the PG_reserved check was added, arch_free_page was being called in the
wrong place (it could be called for a page we don't actually want to free).
Fix that.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With CONFIG_MIGRATION=n
mm/mempolicy.c: In function 'do_mbind':
mm/mempolicy.c:796: warning: passing argument 2 of 'migrate_pages' from incompatible pointer type
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We have a persistent dribble of reports of this BUG triggering. Its extended
diagnostics were recently made conditional on CONFIG_DEBUG_VM, which was a bad
idea - we want to know about it.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
commit fe1668ae5b causes kernel to oops with
libhugetlbfs test suite. The problem is that hugetlb pages can be shared
by multiple mappings. Multiple threads can fight over page->lru in the
unmap path and bad things happen. We now serialize __unmap_hugepage_range
to void concurrent linked list manipulation. Such serialization is also
needed for shared page table page on hugetlb area. This patch will fixed
the bug and also serve as a prepatch for shared page table.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
memmap_zone_idx() is not used anymore. It was required by an earlier
version of
account-for-memmap-and-optionally-the-kernel-image-as-holes.patch but not
any more.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Init list is called with a list parameter that is not equal to the
cachep->nodelists entry under NUMA if more than one node exists. This is
fully legitimatei. One may want to populate the list fields before
switching nodelist pointers.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a way for a no_page() handler to request a retry of the faulting
instruction. It goes back to userland on page faults and just tries again
in get_user_pages(). I added a cond_resched() in the loop in that later
case.
The problem I have with signal and spufs is an actual bug affecting apps and I
don't see other ways of fixing it.
In addition, we are having issues with infiniband and 64k pages (related to
the way the hypervisor deals with some HV cards) that will require us to muck
around with the MMU from within the IB driver's no_page() (it's a pSeries
specific driver) and return to the caller the same way using NOPAGE_REFAULT.
And to add to this, the graphics folks have been following a new approach of
memory management that involves transparently swapping objects between video
ram and main meory. To do that, they need installing PTEs from a no_page()
handler as well and that also requires returning with NOPAGE_REFAULT.
(For the later, they are currently using io_remap_pfn_range to install one PTE
from no_page() which is a bit racy, we need to add a check for the PTE having
already been installed afer taking the lock, but that's ok, they are only at
the proof-of-concept stage. I'll send a patch adding a "clean" function to do
that, we can use that from spufs too and get rid of the sparsemem hacks we do
to create struct page for SPEs. Basically, that provides a generic solution
for being able to have no_page() map hardware devices, which is something that
I think sound driver folks have been asking for some time too).
All of these things depend on having the NOPAGE_REFAULT exit path from
no_page() handlers.
Signed-off-by: Benjamin Herrenchmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reduce the NUMA text size of mm/slab.o a little on x86 by using a local
variable to store the result of numa_node_id().
text data bss dec hex filename
16858 2584 16 19458 4c02 mm/slab.o (before)
16804 2584 16 19404 4bcc mm/slab.o (after)
[akpm@osdl.org: use better names]
[pbadari@us.ibm.com: fix that]
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* master.kernel.org:/pub/scm/linux/kernel/git/davej/configh:
Remove all inclusions of <linux/config.h>
Manually resolved trivial path conflicts due to removed files in
the sound/oss/ subdirectory.
- rename ____kmalloc to kmalloc_track_caller so that people have a chance
to guess what it does just from it's name. Add a comment describing it
for those who don't. Also move it after kmalloc in slab.h so people get
less confused when they are just looking for kmalloc - move things around
in slab.c a little to reduce the ifdef mess.
[penberg@cs.helsinki.fi: Fix up reversed #ifdef]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix kernel-doc and function declaration (missing "void") in
mm/page_alloc.c.
Add mm/page_alloc.c to kernel-api.tmpl in DocBook.
mm/page_alloc.c:2589:38: warning: non-ANSI function declaration of function 'remove_all_active_ranges'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Spotted by Hugh that hugetlb page is free'ed back to global pool before
performing any TLB flush in unmap_hugepage_range(). This potentially allow
threads to abuse free-alloc race condition.
The generic tlb gather code is unsuitable to use by hugetlb, I just open
coded a page gathering list and delayed put_page until tlb flush is
performed.
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Having min be a signed quantity means gcc can't turn high latency divides
into shifts. There happen to be two such divides for GFP_ATOMIC (ie.
networking, ie. important) allocations, one of which depends on the other.
Fixing this makes code smaller as a bonus.
Shame on somebody (probably me).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch against fixes a spelling mistake ("control" instead of "cotrol").
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Randy brought it to my attention that in proper english "can not" should always
be written "cannot". I donot see any reason to argue, even if I mightnot
understand why this rule exists. This patch fixes "can not" in several
Documentation files as well as three Kconfigs.
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Implement lazy MMU update hooks which are SMP safe for both direct and shadow
page tables. The idea is that PTE updates and page invalidations while in
lazy mode can be batched into a single hypercall. We use this in VMI for
shadow page table synchronization, and it is a win. It also can be used by
PPC and for direct page tables on Xen.
For SMP, the enter / leave must happen under protection of the page table
locks for page tables which are being modified. This is because otherwise,
you end up with stale state in the batched hypercall, which other CPUs can
race ahead of. Doing this under the protection of the locks guarantees the
synchronization is correct, and also means that spurious faults which are
generated during this window by remote CPUs are properly handled, as the page
fault handler must re-check the PTE under protection of the same lock.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change pte_clear_full to a more appropriately named pte_clear_not_present,
allowing optimizations when not-present mapping changes need not be reflected
in the hardware TLB for protected page table modes. There is also another
case that can use it in the fremap code.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We don't want to read PTEs directly like this after they have been modified,
as a lazy MMU implementation of direct page tables may not have written the
updated PTE back to memory yet.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The recent fix to invalidate_inode_pages() (git commit 016eb4a) managed to
unfix invalidate_inode_pages2().
The problem is that various bits of code in the kernel can take transient refs
on pages: the page scanner will do this when inspecting a batch of pages, and
the lru_cache_add() batching pagevecs also hold a ref.
Net result is transient failures in invalidate_inode_pages2(). This affects
NFS directory invalidation (observed) and presumably also block-backed
direct-io (not yet reported).
Fix it by reverting invalidate_inode_pages2() back to the old version which
ignores the page refcounts.
We may come up with something more clever later, but for now we need a 2.6.18
fix for NFS.
Cc: Chuck Lever <cel@citi.umich.edu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is mostly included for parity with dec_nlink(), where we will have some
more hooks. This one should stay pretty darn straightforward for now.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a filesystem decrements i_nlink to zero, it means that a write must be
performed in order to drop the inode from the filesystem.
We're shortly going to have keep filesystems from being remounted r/o between
the time that this i_nlink decrement and that write occurs.
So, add a little helper function to do the decrements. We'll tie into it in a
bit to note when i_nlink hits zero.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch cleans up generic_file_*_read/write() interfaces. Christoph
Hellwig gave me the idea for this clean ups.
In a nutshell, all filesystems should set .aio_read/.aio_write methods and use
do_sync_read/ do_sync_write() as their .read/.write methods. This allows us
to cleanup all variants of generic_file_* routines.
Final available interfaces:
generic_file_aio_read() - read handler
generic_file_aio_write() - write handler
generic_file_aio_write_nolock() - no lock write handler
__generic_file_aio_write_nolock() - internal worker routine
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch vectorizes aio_read() and aio_write() methods to prepare for
collapsing all aio & vectored operations into one interface - which is
aio_read()/aio_write().
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Michael Holzheu <HOLZHEU@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
One of idiomatic ways to duplicate a region of memory is
dst = kmalloc(len, GFP_KERNEL);
if (!dst)
return -ENOMEM;
memcpy(dst, src, len);
which is neat code except a programmer needs to write size twice. Which
sometimes leads to mistakes. If len passed to kmalloc is smaller that len
passed to memcpy, it's straight overwrite-beyond-end. If len passed to
memcpy is smaller than len passed to kmalloc, it's either a) legit
behaviour ;-), or b) cloned buffer will contain garbage in second half.
Slight trolling of commit lists shows several duplications bugs
done exactly because of diverged lenghts:
Linux:
[CRYPTO]: Fix memcpy/memset args.
[PATCH] memcpy/memset fixes
OpenBSD:
kerberosV/src/lib/asn1: der_copy.c:1.4
If programmer is given only one place to play with lengths, I believe, such
mistakes could be avoided.
With kmemdup, the snippet above will be rewritten as:
dst = kmemdup(src, len, GFP_KERNEL);
if (!dst)
return -ENOMEM;
This also leads to smaller code (kzalloc effect). Quick grep shows
200+ places where kmemdup() can be used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The api for hot-add memory already has a construct for finding nodes based on
an address, memory_add_physaddr_to_nid. This patch allows the fucntion to do
something besides return 0. It uses the nodes_add infomation to lookup to
node info for a hot add event.
Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Create Kconfig namespace for MEMORY_HOTPLUG_RESERVE and MEMORY_HOTPLUG_SPARSE.
This is needed to create a disticiton between the 2 paths. Selecting the
high level opiton of MEMORY_HOTPLUG will get you MEMORY_HOTPLUG_SPARSE if you
have sparsemem enabled or MEMORY_HOTPLUG_RESERVE if you are x86_64 with
discontig and ACPI numa support.
Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Don't try and give NULL to fput() in the error handling in do_mmap_pgoff()
as it'll cause an oops.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dissociate the generic_writepages() function from the mpage stuff, moving its
declaration to linux/mm.h and actually emitting a full implementation into
mm/page-writeback.c.
The implementation is a partial duplicate of mpage_writepages() with all BIO
references removed.
It is used by NFS to do writeback.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the bounce buffer code from mm/highmem.c to mm/bounce.c so that it can be
more easily disabled when the block layer is disabled.
!!!NOTE!!! There may be a bug in this code: Should init_emergency_pool() be
contingent on CONFIG_HIGHMEM?
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stop fallback_migrate_page() from using page_has_buffers() since that might not
be available. Use PagePrivate() instead since that's more general.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move some functions out of the buffering code that aren't strictly buffering
specific. This is a precursor to being able to disable the block layer.
(*) Moved some stuff out of fs/buffer.c:
(*) The file sync and general sync stuff moved to fs/sync.c.
(*) The superblock sync stuff moved to fs/super.c.
(*) do_invalidatepage() moved to mm/truncate.c.
(*) try_to_release_page() moved to mm/filemap.c.
(*) Moved some related declarations between header files:
(*) declarations for do_invalidatepage() and try_to_release_page() moved
to linux/mm.h.
(*) __set_page_dirty_buffers() moved to linux/buffer_head.h.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
akpm draws my attention to the fact that sysctl(VM_PAGE_CLUSTER) might
conceivably change page_cluster to 0 while valid_swaphandles() is in the
middle of using it, leading to an embarrassingly long loop: take a local
snapshot of page_cluster and work with that.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ratelimit_pages in page-writeback.c is recalculated (in set_ratelimit())
every time a CPU is hot-added/removed. But this value is not recalculated
when new pages are hot-added.
This patch fixes that problem by calling set_ratelimit() when new pages
are hot-added.
[akpm@osdl.org: cleanups]
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
page-writeback.c has a static local variable "total_pages", which is the
total number of pages in the system.
There is a global variable "vm_total_pages", which is the total number of
pages the VM controls.
Both are assigned from the return value of nr_free_pagecache_pages().
This patch removes the local variable and uses the global variable in that
place.
One more issue with the local static variable "total_pages" is that it is
not updated when new pages are hot-added. Since vm_total_pages is updated
when new pages are hot-added, this patch fixes that problem too.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the list of memory nodes allowed to tasks in the top (root) nodeset
to dynamically track what cpus are online, using a call to a cpuset hook
from the memory hotplug code. Make this top cpus file read-only.
On systems that have cpusets configured in their kernel, but that aren't
actively using cpusets (for some distros, this covers the majority of
systems) all tasks end up in the top cpuset.
If that system does support memory hotplug, then these tasks cannot make
use of memory nodes that are added after system boot, because the memory
nodes are not allowed in the top cpuset. This is a surprising regression
over earlier kernels that didn't have cpusets enabled.
One key motivation for this change is to remain consistent with the
behaviour for the top_cpuset's 'cpus', which is also read-only, and which
automatically tracks the cpu_online_map.
This change also has the minor benefit that it fixes a long standing,
little noticed, minor bug in cpusets. The cpuset performance tweak to
short circuit the cpuset_zone_allowed() check on systems with just a single
cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply
changing the 'mems' of the top_cpuset had no affect, even though the change
(the write system call) appeared to succeed. With the following change,
that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly
refuses to be changed via user space writes. Thus no one should be mislead
into thinking they've changed the top_cpusets's 'mems' when in affect they
haven't.
In order to keep the behaviour of cpusets consistent between systems
actively making use of them and systems not using them, this patch changes
the behaviour of the 'mems' file in the top (root) cpuset, making it read
only, and making it automatically track the value of node_online_map. Thus
tasks in the top cpuset will have automatic use of hot plugged memory nodes
allowed by their cpuset.
[akpm@osdl.org: build fix]
[bunk@stusta.de: build fix]
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A previous patch to allow an exiting task to OOM kill itself (and thereby
avoid a little deadlock) introduced a problem. We don't want the
PF_EXITING task, even if it is 'current', to access mem reserves if there
is already a TIF_MEMDIE process in the system sucking up reserves.
Also make the commenting a little bit clearer, and note that our current
scheme of effectively single threading the OOM killer is not itself
perfect.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- It is not possible to have task->mm == &init_mm.
- task_lock() buys nothing for 'if (!p->mm)' check.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
No logic changes, but imho easier to read.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The only one usage of TASK_DEAD outside of last schedule path,
select_bad_process:
for_each_task(p) {
if (!p->mm)
continue;
...
if (p->state == TASK_DEAD)
continue;
...
TASK_DEAD state is set at the end of do_exit(), this means that p->mm
was already set == NULL by exit_mm(), so this task was already rejected
by 'if (!p->mm)' above.
Note also that the caller holds tasklist_lock, this means that p can't
pass exit_notify() and then set TASK_DEAD when p->mm != NULL.
Also, remove open-coded is_init().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I am not sure about this patch, I am asking Ingo to take a decision.
task_struct->state == EXIT_DEAD is a very special case, to avoid a confusion
it makes sense to introduce a new state, TASK_DEAD, while EXIT_DEAD should
live only in ->exit_state as documented in sched.h.
Note that this state is not visible to user-space, get_task_state() masks off
unsuitable states.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is an updated version of Eric Biederman's is_init() patch.
(http://lkml.org/lkml/2006/2/6/280). It applies cleanly to 2.6.18-rc3 and
replaces a few more instances of ->pid == 1 with is_init().
Further, is_init() checks pid and thus removes dependency on Eric's other
patches for now.
Eric's original description:
There are a lot of places in the kernel where we test for init
because we give it special properties. Most significantly init
must not die. This results in code all over the kernel test
->pid == 1.
Introduce is_init to capture this case.
With multiple pid spaces for all of the cases affected we are
looking for only the first process on the system, not some other
process that has pid == 1.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: <lxc-devel@lists.sourceforge.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In cases where we detect a single bit has been flipped, we spew the usual
slab corruption message, which users instantly think is a kernel bug. In a
lot of cases, single bit errors are down to bad memory, or other hardware
failure.
This patch adds an extra line to the slab debug messages in those cases, in
the hope that users will try memtest before they report a bug.
000: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Single bit error detected. Possibly bad RAM. Run memtest86.
[akpm@osdl.org: cleanups]
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Failing context is a multi threaded process context and the failing
sequence is as follows.
One thread T0 doing self modifying code on page X on processor P0 and
another thread T1 doing COW (breaking the COW setup as part of just
happened fork() in another thread T2) on the same page X on processor P1.
T0 doing SMC can endup modifying the new page Y (allocated by the T1 doing
COW on P1) but because of different I/D TLB's, P0 ITLB will not see the new
mapping till the flush TLB IPI from P1 is received. During this interval,
if T0 executes the code created by SMC it can result in an app error (as
ITLB still points to old page X and endup executing the content in page X
rather than using the content in page Y).
Fix this issue by first clearing the PTE and flushing it, before updating
it with new entry.
Hugh sayeth:
I was a bit sceptical, in the habit of thinking that Self Modifying Code
must look such issues itself: but I guess there's nothing it can do to avoid
this one.
Fair enough, what you're changing it to is pretty much what powerpc and
s390 were already doing, and is a more robust way of proceeding, consistent
with how ptes are set everywhere else.
The ptep_clear_flush is a bit heavy-handed (it's anxious to return the pte
that was atomically cleared), but we'd have to wander through lots of arches
to get the right minimal behaviour. It'd also be nice to eliminate
ptep_establish completely, now only used to define other macros/inlines: it
always seemed obfuscation to me, what you've got there now is clearer.
Let's put those cleanups on a TODO list.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make futexes work under NOMMU conditions.
This can be tested by running this in one shell:
#define SYSERROR(X, Y) \
do { if ((long)(X) == -1L) { perror(Y); exit(1); }} while(0)
int main()
{
int shmid, tmp, *f, n;
shmid = shmget(23, 4, IPC_CREAT|0666);
SYSERROR(shmid, "shmget");
f = shmat(shmid, NULL, 0);
SYSERROR(f, "shmat");
n = *f;
printf("WAIT: %p{%x}\n", f, n);
tmp = futex(f, FUTEX_WAIT, n, NULL, NULL, 0);
SYSERROR(tmp, "futex");
printf("WAITED: %d\n", tmp);
tmp = shmdt(f);
SYSERROR(tmp, "shmdt");
exit(0);
}
And then this in the other shell:
#define SYSERROR(X, Y) \
do { if ((long)(X) == -1L) { perror(Y); exit(1); }} while(0)
int main()
{
int shmid, tmp, *f;
shmid = shmget(23, 4, IPC_CREAT|0666);
SYSERROR(shmid, "shmget");
f = shmat(shmid, NULL, 0);
SYSERROR(f, "shmat");
(*f)++;
printf("WAKE: %p{%x}\n", f, *f);
tmp = futex(f, FUTEX_WAKE, 1, NULL, NULL, 0);
SYSERROR(tmp, "futex");
printf("WOKE: %d\n", tmp);
tmp = shmdt(f);
SYSERROR(tmp, "shmdt");
exit(0);
}
The first program will set up a SYSV IPC SHM segment and wait on a futex in it
for the number at the start to change. The program will increment that number
and wake the first program up. This leads to output of the form:
SHELL 1 SHELL 2
======================= =======================
# /dowait
WAIT: 0xc32ac000{0}
# /dowake
WAKE: 0xc32ac000{1}
WAITED: 0 WOKE: 1
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make mremap() partially work for NOMMU kernels. It may resize a VMA provided
that it doesn't exceed the size of the slab object in which the storage is
allocated that the VMA refers to. Shareable VMAs may not be resized.
Moving VMAs (as permitted by MREMAP_MAYMOVE) is not currently supported.
This patch also makes use of the fact that the VMA list is now ordered to cut
it short when possible.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Order the per-mm_struct VMA list by address so that searching it can be cut
short when the appropriate address has been exceeded.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Permit ptrace to modify a section that's non-shared but is marked
unwritable, such as is obtained by mapping the text segment of an ELF-FDPIC
executable binary with into a binary that's being ptraced[*].
[*] Under NOMMU conditions ptrace causes read-only MAP_PRIVATE mmaps to become
totally private copies because if a private mapping was actually shared
then the debugging setting breakpoints in it would potentially crash
other processes.
This is done by using the VM_MAYWRITE flag rather than the VM_WRITE flag
when deciding whether to permit a write.
Without this patch a debugger can't set breakpoints in the mapped text
sections of executables that are mapped read-only private, even if the
mmap() syscall has taken a private copy because PT_PTRACED is set.
In addition, VM_MAYREAD is used instead of VM_READ for similar reasons.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check the VMA protections in get_user_pages() against what's being asked.
This checks to see that we don't accidentally write on a non-writable VMA or
permit an I/O mapping VMA to be accessed (which may lack page structs).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In NOMMU arch, if run "cat /proc/self/mem", data from physical address 0
are read. This behavior is different from MMU arch. In IA32, message
"cat: /proc/self/mem: Input/output error" is reported.
This issue is rootcaused by not validate the start address in NOMMU
function get_user_pages(). Following patch solves this issue.
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use find_vma() in the NOMMU version of access_process_vm() rather than
reimplementing it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check that access_process_vm() is accessing a valid mapping in the target
process.
This limits ptrace() accesses and accesses through /proc/<pid>/maps to only
those regions actually mapped by a program.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The function is exported but not used from anywhere else. It's also marked as
"not for driver use" so noone out there should really care.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The empty line between the short description and the first argument
description causes a section to appear twice in the generated manpage.
Also the short description should really be short: the script can't handle
multiple lines.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use NULL instead of 0 for pointer value, eliminate sparse warnings.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement do_no_pfn() for handling mapping of memory without a struct page
backing it. This avoids creating fake page table entries for regions which
are not backed by real memory.
This feature is used by the MSPEC driver and other users, where it is
highly undesirable to have a struct page sitting behind the page (for
instance if the page is accessed in cached mode via the struct page in
parallel to the the driver accessing it uncached, which can result in data
corruption on some architectures, such as ia64).
This version uses specific NOPFN_{SIGBUS,OOM} return values, rather than
expect all negative pfn values would be an error. It also bugs on cow
mappings as this would not work with the VM.
[akpm@osdl.org: micro-optimise]
Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that we have the node in the hot zone of struct zone we can avoid
accessing zone_pgdat in zone_statistics.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We do not need to allocate pagesets for unpopulated zones.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add the node in order to optimize zone_to_nid.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>