Commit graph

2037 commits

Author SHA1 Message Date
Linus Torvalds
f0d5e12bd4 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
  x86, apic: Fix dummy apic read operation together with broken MP handling
  x86, apic: Restore irqs on fail paths
  x86: Print real IOAPIC version for x86-64
  x86: enable_update_mptable should be a macro
  sparseirq: Allow early irq_desc allocation
  x86, io-apic: Don't mark pin_programmed early
  x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
  x86, irq: update_mptable needs pci_routeirq
  x86: don't call read_apic_id if !cpu_has_apic
  x86, apic: introduce io_apic_irq_attr
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
  x86: read apic ID in the !acpi_lapic case
  x86: apic: Fixmap apic address even if apic disabled
  x86: display extended apic registers with print_local_APIC and cpu_debug code
  x86: read apic ID in the !acpi_lapic case
  x86: clean up and fix setup_clear/force_cpu_cap handling
  x86: apic: Check rev 3 fadt correctly for physical_apic bit
  x86/pci: update pirq_enable_irq() to setup io apic routing
  x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
  ...
2009-06-10 15:25:41 -07:00
Yinghai Lu
eaa958402e cpumask: alloc zeroed cpumask for static cpumask_var_ts
These are defined as static cpumask_var_t so if MAXSMP is not used,
they are cleared already.  Avoid surprises when MAXSMP is enabled.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-09 22:30:27 +09:30
Ingo Molnar
3d58f48ba0 Merge branch 'linus' into irq/numa
Conflicts:
	arch/mips/sibyte/bcm1480/irq.c
	arch/mips/sibyte/sb1250/irq.c

Merge reason: we gathered a few conflicts plus update to latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 21:06:21 +02:00
Len Brown
6afec830ac Merge branches 'bugzilla-13121+', 'bugzilla-13233', 'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release 2009-05-29 21:30:01 -04:00
Frans Pop
21671b88be ACPI processor: remove spurious newline from warning message
Commit 4973b22a ("ACPI processor: reset the throttling state once it's
invalid") introduced a new warning which prints a spurious newline.

The ACPI_WARNING macro that is used already takes care of adding a
newline, after adding ACPI_CA_VERSION to the message. Remove the newline
to avoid the message getting split into two lines.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:26:26 -04:00
Jaswinder Singh Rajput
1fc8d33aca drm/i915: acpi/video.c fix section mismatch warning
Currently acpi_video_exit() is exported as well as using __exit which causes:

  WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit()
  The symbol acpi_video_exit is exported and annotated __exit
  Fix this by removing the __exit annotation of acpi_video_exit or drop the export.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:26:25 -04:00
Zhang Rui
93bcece20e ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightness
http://bugzilla.kernel.org/show_bug.cgi?id=13121

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:24:06 -04:00
Zhang Rui
34ac272b3a ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display brightness
http://bugzilla.kernel.org/show_bug.cgi?id=13376

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:21:33 -04:00
Len Brown
34d531e640 ACPI: sanity check _PSS frequency to prevent cpufreq crash
When BIOS SETUP is changed to disable EIST, some BIOS
hand the OS an un-initialized _PSS:

        Name (_PSS, Package (0x06)
        {
            Package (0x06)
            {
                0x80000000,	// frequency [MHz]
                0x80000000,	// power [mW]
                0x80000000,	// latency [us]
                0x80000000,	// BM latency [us]
                0x80000000,	// control
                0x80000000	// status
            },
	    ...

These are outrageous values for frequency,
power and latency, raising the question where to draw
the line between legal and illegal.  We tend to survive
garbage in the power and latency fields, but we can BUG_ON
when garbage is in the frequency field.

Cpufreq multiplies the frequency by 1000 and stores it in a u32 KHz.
So disregard a _PSS with a frequency so large
that it can't be represented by cpufreq.

https://bugzilla.redhat.com/show_bug.cgi?id=500311

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 20:45:58 -04:00
Kenji Kaneshige
dacd2549ca PCI/ACPI: fix wrong ref count handling in acpi_pci_bind()
The 'dev' field of struct acpi_pci_data is having a pointer to struct
pci_dev without incrementing the reference counter. Because of this, I
got the following kernel oops when I was doing some pci hotplug
operations. This patch fixes this bug by replacing wrong hand-made
pci_find_slot() with pci_get_slot() in acpi_pci_bind().

 BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8
 IP: [<ffffffff803f0e9b>] acpi_pci_unbind+0xb1/0xdd

 Call Trace:
  [<ffffffff803ecee4>] acpi_bus_remove+0x54/0x68
  [<ffffffff803ecf6d>] acpi_bus_trim+0x75/0xe3
  [<ffffffffa0345ddd>] acpiphp_disable_slot+0x16d/0x1e0 [acpiphp]
  [<ffffffffa03441f0>] disable_slot+0x20/0x60 [acpiphp]
  [<ffffffff803cfc18>] power_write_file+0xc8/0x110
  [<ffffffff803c6a54>] pci_slot_attr_store+0x24/0x30
  [<ffffffff803469ce>] sysfs_write_file+0xce/0x140
  [<ffffffff802e94e7>] vfs_write+0xc7/0x170
  [<ffffffff802e9aa0>] sys_write+0x50/0x90
  [<ffffffff8020bd6b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Tested-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 17:53:07 -04:00
Shaohua Li
7d60e8ab0d cpuidle: fix AMD C1E suspend hang
When AMD C1E is enabled, local APIC timer will stop even in C1. To avoid
suspend/resume hang, this patch removes C1 and replace it with a cpu_relax() in
suspend/resume path. This hasn't any impact in runtime path.

http://bugzilla.kernel.org/show_bug.cgi?id=13233

[ impact: avoid suspend/resume hang in AMD CPU with C1E enabled ]

Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26 23:45:33 -04:00
Shaohua Li
87ad57bacb cpuidle: makes AMD C1E work in acpi_idle
When AMD C1E is enabled, local APIC timer will stop even in C1.
This patch uses broadcast IPI to replace local APIC timer in C1.

http://bugzilla.kernel.org/show_bug.cgi?id=13233

[ impact: avoid boot hang in AMD CPU with C1E enabled ]

Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26 23:38:56 -04:00
Len Brown
4e3507f718 Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release 2009-05-16 01:55:59 -04:00
Len Brown
a0bf284bfe ACPI: Idle C-states disabled by max_cstate should not disable the TSC
Processor idle power states C2 and C3 stop the TSC on many machines.
Linux recognizes this situation and marks the TSC as unstable:

Marking TSC unstable due to TSC halts in idle

But if those same machines are booted with "processor.max_cstate=1",
then there is no need to validate C2 and C3, and no need to
disable the TSC, which can be reliably used as a clocksource.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-16 01:52:39 -04:00
Len Brown
520daf7217 ACPI: idle: fix init-time TSC check regression
A previous 2.6.30 patch, a71e4917dc,
(ACPI: idle: mark_tsc_unstable() at init-time, not run-time)
erroneously disabled the TSC on systems that did not actually
have valid deep C-states.

Move the check after the deep-C-states are validated,
via new helper, tsc_check_state(), hich replaces tsc_halts_in_c().

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frans Pop <elendil@planet.nl>
2009-05-16 01:51:51 -04:00
Zhang Rui
4973b22aa8 ACPI processor: reset the throttling state once it's invalid
If the BIOS hands us an invalid throttling state,
write a valid state.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 23:21:54 -04:00
Zhang Rui
56c213fa01 ACPI processor: introduce module parameter processor.ignore_tpc
Introduce module parameter processor.ignore_tpc.

Some laptops are shipped with buggy _TPC,
this module parameter is used to to disable the buggy support.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 23:21:43 -04:00
Len Brown
815ab0fd40 ACPI: suspend: restore BM_RLD on resume
In 2.6.29,
31878dd86b
"ACPI: remove BM_RLD access from idle entry path"
moved BM_RLD initialization to init-time from run time.

But we discovered that some BIOS do not restore BM_RLD
after suspend, causing device errors on C3 and C4
after resume.  So now the kernel restores BM_RLD.

http://bugzilla.kernel.org/show_bug.cgi?id=13032

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 22:44:05 -04:00
Lin Ming
975b3c474c ACPI: resume: re-enable SCI-enable workaround
The BIOS bug workaround mistakenly got disabled
when we followed the ACPI specification more closely
by ignoring OS updates to that bit.

(The BIOS is supposed to update SCI_EN, not the OS)

http://bugzilla.kernel.org/show_bug.cgi?id=13289

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 22:27:49 -04:00
Ingo Molnar
6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Len Brown
ddc50b6ad6 ACPI: power: update error message
"Transitioning device [%s] to D%d" is not correct.
We print this line when we attempted to transition
the device, and it failed.

So instead, print
"Device [%s] failed to transition to D%d\n"

This can happen under two conditions:

1. acpi_power_transition() fails when trying to handle the
   _ON/_OFF for associated power resource.

2. acpi_evaluate_object() on the explicit _PS0/_PS3
   for that actual device could fail.

this change clarifies, but doesn't fix
http://bugzilla.kernel.org/show_bug.cgi?id=13243

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-08 00:07:30 -04:00
Len Brown
5afc4abe79 ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness
http://bugzilla.kernel.org/show_bug.cgi?id=13121

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-07 21:11:56 -04:00
Len Brown
5199176341 ACPICA: use acpi.* modparam namespace
Add acpi/acpica/*.c to the acpi.* modparam namespace
so that any modparams we stick into ACPICA do not
expose ACPICA filenames to users.

There are currently only two modparams in ACPICA,
just recently added for
http://bugzilla.kernel.org/show_bug.cgi?id=13041

With this change, they become

acpi.gts=1
acpi.bfs=1

rather than

hwsleep.gts=1
hwsleep.bfs=1

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-07 15:24:31 -04:00
Robert Moore
53951bd57d acpica: validate package element more carefully in acpi_rs_get_pci_routing_table_length
acpi_rs_get_pci_routing_table_length is not performing sufficient
validation on the package returned from _PRT.  It assumes a package of
packages and fails/faults if this is not the case.

We should validate each subpackage when extracted from the parent
package, and not accept objects of the wrong type, since that will just
cause the scanning to fail (likely with a kernel oops).

This can only happen with a serious BIOS bug, and is accompanied by a
warning something like this:

  ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 11:48:37 -07:00
Linus Torvalds
56a50adda4 Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: fix up error path leak in i915_cmdbuffer
  drm/i915: fix unpaired i915 device mutex on entervt failure.
  drm/i915: add support for G41 chipset
  drm/i915: Enable ASLE if present
  drm/i915: Unregister ACPI video driver when exiting
  drm/i915: Register ACPI video even when not modesetting
  drm/i915: fix transition to I915_TILING_NONE
  drm/i915: Don't let an oops get triggered from irq_emit without dma init.
  drm/i915: allow tiled front buffers on 965+
2009-04-28 17:21:20 -07:00
Yinghai Lu
a2f809b08a irq: change ACPI GSI APIs to also take a device argument
We want to use dev_to_node() later on, to be aware of the 'home node'
of the GSI in question.

[ Impact: cleanup, prepare the IRQ code to be more NUMA aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
LKML-Reference: <49F65560.20904@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:17 +02:00
Zhang Rui
45cb50e646 ACPI video: dmi check for broken _BQC on Acer Aspire 5720
On Acer Aspire 5720, _BQC always returns a value 9 smaller than
the actual brightness level.  Add dmi quirk for this laptop.

http://bugzilla.kernel.org/show_bug.cgi?id=13121

Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 12:13:18 -04:00
Len Brown
1162cf6bc6 Merge branch 'bjorn.button' into release 2009-04-24 10:42:29 -04:00
Len Brown
5f855a8f0c Merge branch 'bugzilla-13036' into release 2009-04-24 10:42:21 -04:00
Len Brown
9c18f0b709 Merge branch 'bugzilla-13142' into release 2009-04-24 10:42:03 -04:00
Len Brown
3869e929bb Merge branch 'hpet' into release 2009-04-24 10:41:31 -04:00
Len Brown
2d40570786 Merge branch 'bugzilla-12249' into release 2009-04-24 01:35:46 -04:00
Len Brown
04a2e6297d Merge branch 'bugzilla-12270' into release 2009-04-24 01:35:33 -04:00
Len Brown
ac0849fb6c Merge branch 'bugzilla-13041' into release 2009-04-24 01:35:24 -04:00
Len Brown
f752a091ab Merge branch 'idle' into release 2009-04-24 01:35:08 -04:00
Len Brown
6e6c348fb2 Merge branch 'irq' into release 2009-04-24 01:34:59 -04:00
Len Brown
7f3745ad7a Merge branch 'sony-laptop' into release 2009-04-24 01:34:52 -04:00
Len Brown
771e5ce3bd Merge branch 'thermal-regression' into release 2009-04-24 01:34:45 -04:00
Len Brown
60cd8adc6b Merge branch 'video-ac-dc' into release 2009-04-24 01:34:29 -04:00
Len Brown
a38d75fa2e Revert "ACPICA: delete check for AML access to port 0x81-83"
This reverts commit fdbdc7fc79.

That temporary quick-fix is no longer necessary,
as the previous patch, a65131e942,
"I/O port protection: update for windows compatibility"
should handle this issue for all ports, including this one.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 00:32:52 -04:00
Lin Ming
a65131e942 I/O port protection: update for windows compatibility.
For windows compatibility,
1) On a port protection violation, simply ignore the request and
   do not return an exception (allow the control method to continue execution.)
2) If only part of the request overlaps a protected port,
   read/write the individual ports that are not protected.

http://bugzilla.kernel.org/show_bug.cgi?id=13036

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 00:25:55 -04:00
Almer S. Tigelaar
5aa63f038f ACPI: EC: Fix ACPI EC resume non-query interrupt message
When resuming from standby (on a laptop) I see the following message in
my kernel.log:
"ACPI: EC: non-query interrupt received, switching to interrupt mode"
This apparently prevented sony-laptop to properly restore the brightness
level on resume.

The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the
GPE mode bit, but this is not restored in acpi_ec_resume (the function
below it). The patch below fixes this by properly restoring the GPE_MODE
bit. Tested and confirmed to work.

Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-23 23:56:57 -04:00
Len Brown
615dfd93e2 ACPI: prevent processor.max_cstate=0 boot crash
As processor.max_cstate is an init-time-only modparam,
sanity checking it at init-time is sufficient.

http://bugzilla.kernel.org/show_bug.cgi?id=13142

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-23 23:21:29 -04:00
Len Brown
f461ddea0a ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M
Linux tells ICH4 users that they can (manually) invoke
"hpet=force" to enable the undocumented ICH-4M HPET.
The HPET becomes available for both clocksource and clockevents.

But as of ff69f2bba6
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
the HPET may be used via clocksource for idle accounting, and
hpet=force on an ICH4 box hangs boot.

It turns out that touching the MMIO HPET withing
the ARB_DIS part of C3 will hang the hardware.

The fix is to simply move the timer access outside
the ARB_DIS region.  This is a no-op on modern hardware
because ARB_DIS is no longer used.

http://bugzilla.kernel.org/show_bug.cgi?id=13087

Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-23 21:51:51 -04:00
Len Brown
9261461077 ACPI: delete obsolete "bus master activity" proc field
Linux-2.6.29 deleted the legacy ACPI idle handler, leaving
the CPU_IDLE handler, which does not track bus master activity.

So delete the unused bm_activity field -- it is confusing to
print an always zero value.

This patch could break programs that parse
/proc/acpi/processor/*/power, since it deletes this
line from that file:

bus master activity:     00000000

http://bugzilla.kernel.org/show_bug.cgi?id=13145
is not fixed by this patch, but provoked this patch.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-22 19:56:09 -04:00
Len Brown
a71e4917dc ACPI: idle: mark_tsc_unstable() at init-time, not run-time
The c2 and c3 idle handlers check tsc_halts_in_c()
after every time they return from idle.  Um, when?:-)

Move this check to init-time to remove the unnecessary
run-time overhead, and also to have the check complete before
the first entry into the idle handler.

ff69f2bba6
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
replaced the hard-coded use of the PM-timer inside idle,
with ktime_get_readl(), which possibly uses the TSC --
so it is now especially prudent to detect a broken TSC
before entering idle.

http://bugzilla.kernel.org/show_bug.cgi?id=13087

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-22 19:22:18 -04:00
Len Brown
88bea188b8 ACPI: add /sys/firmware/acpi/interrupts/sci_not counter
This counter may prove useful in debugging some
spurious interrupt issues seen in the field.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-21 00:35:47 -04:00
Zhang Rui
90af2cf620 ACPI video: fix an error when the brightness levels on AC and on Battery are same
when the brightness level on AC and brightness level on Battery
are same, the level_ac_battery is 1 in the current code,
which is wrong.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-20 00:22:44 -04:00
Rafael J. Wysocki
6a7c7eaf71 PM/Suspend: Introduce two new platform callbacks to avoid breakage
Commit 900af0d973 (PM: Change suspend
code ordering) changed the ordering of suspend code in such a way
that the platform .prepare() callback is now executed after the
device drivers' late suspend callbacks have run.  Unfortunately, this
turns out to break ARM platforms that need to talk via I2C to power
control devices during the .prepare() callback.

For this reason introduce two new platform suspend callbacks,
.prepare_late() and .wake(), that will be called just prior to
disabling non-boot CPUs and right after bringing them back on line,
respectively, and use them instead of .prepare() and .finish() for
ACPI suspend.  Make the PM core execute the .prepare() and .finish()
platform suspend callbacks where they were executed previously (that
is, right after calling the regular suspend methods provided by
device drivers and right before executing their regular resume
methods, respectively).

It is not necessary to make analogous changes to the hibernation
code and data structures at the moment, because they are only used
by ACPI platforms.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Len Brown <len.brown@intel.com>
2009-04-19 20:08:42 +02:00
Matthew Garrett
67405439bc thermal: Fix polling frequency for systems without passive cooling
The polling interval (in deciseconds) was accidently interpreted as
being in milliseconds in one codepath, resulting in excessively frequent
polling. Ensure that the conversion is performed.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-18 01:05:23 -04:00