Commit graph

79 commits

Author SHA1 Message Date
Volker Ernst
4e4e66029a serial/imx: check that the buffer is non-empty before sending it out
The .start_tx callback (imx_start_tx here) isn't only called when the
buffer is non-empty.  E.g. after resume or when handshaking is enabled
and the other side starts to signal being ready.

So check for an empty puffer already before sending the first character.
This prevents sending out stale (or uninitialised) data.

Signed-off-by: Volker Ernst <volker.ernst@txtr.com>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Andy Green <andy@warmcat.com>
[ukl: reword commit log, put check in while condition]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:20:10 -07:00
Alan Cox
eab4f5af6b tty: serial - fix tty back references in termios
One or two drivers go poking back into the tty from the termios setting
routine in unsafe ways. We don't need to pass the tty down because the
[ab]users are just using it to get at things they can get at anyway.

This leaves low_latency setting to sort out along with set_ldisc use.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:41 -07:00
Valentin Longchamp
1c5250d616 serial: imx.c: fix CTS trigger level lower to avoid lost chars
The imx CTS trigger level is left at its reset value that is 32
chars. Since the RX FIFO has 32 entries, when CTS is raised, the
FIFO already is full. However, some serial port devices first empty
their TX FIFO before stopping when CTS is raised, resulting in lost
chars.

This patch sets the trigger level lower so that other chars arrive
after CTS is raised, there is still room for 16 of them.

Signed-off-by: Valentin Longchamp<valentin.longchamp@epfl.ch>
Tested-by: Philippe Rétornaz<philippe.retornaz@epfl.ch>
Acked-by: Wolfram Sang<w.sang@pengutronix.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-13 12:10:56 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Russell King
988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Russell King
b93a4afcff Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable
Conflicts:
	arch/arm/Makefile
2010-03-02 23:29:32 +00:00
Baruch Siach
bbcd18d1b3 serial: imx: fix NULL dereference Oops when pdata == NULL
The platform code doesn't have to provide platform data to get sensible
default behaviour from the imx serial driver.

This patch does not handle NULL dereference in the IrDA case, which still
requires a valid platform data pointer (in imx_startup()/imx_shutdown()),
since I don't know whether there is a sensible default behaviour, or
should the operation just fail cleanly.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Oskar Schirmer <os@emlix.com>
Cc: Fabian Godehardt <fg@emlix.com>
Cc: Daniel Glöckner <dg@emlix.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:43:10 -08:00
Andy Green
94d32f99c6 imx-serial-excessive-status-clearing-on-break.patch
cc: Sasha Hauer <kernel@pengutronix.de>

We noticed that we were only able to communicate once with a GSM module
per session, if we powered down the module then the serial driver was
broken until reset, no traffic or /proc/interrupts activity could be
seen any more.

Volker noticed it was provoked by a long "break" seen on the wire when
the RX was not driven during powerdown, we discovered we could kill the
serial driver just by forcing RX low extenally for a little while.

I saw that the processing for BREAK in the driver gets too excited and
clears down all set bits in USR2, including that a character is pending.
This stops all further characters getting processed.

The attached one-liner makes the serial driver immortal against BREAK.

Signed-off-by: Andy Green <andy.green@txtr.com>
Signed-off-by: Volker Ernst <volker.ernst@txtr.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-16 17:16:47 +01:00
Roel Kluin
2e2eb509aa serial: imx: bit &/| confusion
Since UCR1_UARTEN is defined 1, the port was always treated as enabled.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Oskar Schirmer <os@emlix.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabian Godehardt <fg@emlix.com>
Cc: Daniel Glöckner <dg@emlix.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20 15:03:30 -08:00
Alan Cox
bdc04e3174 serial: move delta_msr_wait into the tty_port
This is used by various drivers not just serial and can be extracted
as commonality

Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19 13:13:31 -07:00
Alan Cox
ebd2c8f6d2 serial: kill off uart_info
We moved this into uart_state, now move the fields out of the separate
structure and kill it off.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:28 -07:00
Sascha Hauer
37d6fb629e i.MX serial: do not use #ifdef CONFIG_ARCH_*
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:53 +02:00
Sascha Hauer
1a2c4b3147 imx: Check for NULL pointer deref before calling tty_encode_baud_rate
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 12:01:17 -07:00
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Oskar Schirmer
d7f8d437bd imx: serial: use tty_encode_baud_rate to set true rate
real baud rate may be different from the one requested.
for upper layers, set the nearest value to the real rate
in favour of the rate previously requested.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:09 -07:00
Fabian Godehardt
b6e4913834 imx: serial: add IrDA support to serial driver
Using the iMX serial driver with an IrDA device
needs extra peripheral settings and specific
timing depending on the transmitter circuitry used.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Oskar Schirmer
534fca068e imx: serial: use rational library function
for calculation of numerator and denominator
used in baud rate setting, use generic library function
for optimum settings.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Daniel Glöckner
9f322ad064 imx: serial: handle initialisation failure correctly
correctly de-initialise device when setting up failed,
call to pdata->exit() was missing.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Fabian Godehardt
2e1463922a imx: serial: be sure to stop xmit upon shutdown
needed to avoid continued transmission by hardware
while software already shuts down, which might
cause dangling characters to show up in hardware
queues when restarting the device.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Fabian Godehardt
977757311e imx: serial: notify higher layers in case xmit IRQ was not called
upper layers, namely line discipline, need to be notified
when transmission of more data is possible. For spurious
cases, where IRQ handling does not supply notification
for sure, it is given additionally here, when data has just
been transmitted and space in the buffer will most probably
be available.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Daniel Glöckner
26bbb3ff1f imx: serial: fix one bit field type
"have_rtscts" is assigned 1, while it is declared
int:1, two's complement, which can hold 0 and -1
only. The code works, as the upper bits are cut
off, and tests are done against 0 only.

Nonetheless, correctly declaring the bit field
as unsigned int:1 renders the code more robust.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Oskar Schirmer
d3810cd4d7 imx: serial: fix whitespaces (no changes in functionality)
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:07 -07:00
Eric Lammerts
e76afc4e78 fix oops when using console=ttymxcN with N > 0
Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 11:51:05 +02:00
Eric Lammerts
0003b795c3 fix oops when using console=ttymxcN with N > 0
Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-20 19:09:20 +02:00
Sascha Hauer
8c8fdbc9bd [ARM] Remove arch-imx from build system
arch-imx is superseeded by the MXC architecture support.
This patch removes arch-imx from the build system.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:48 +02:00
Sascha Hauer
e65fb0099f [ARM] MXC: remove _clk suffix from clock names
The context makes it clear already that these are clocks, so there's
no need for such a suffix. This patch only changes the clocks actually
used in the tree. The remaining clocks are renamed in the subsequent
architecture specific patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:48 +01:00
Sascha Hauer
9d631b835f [ARM] MXC: remove dependency to other include files from irqs.h
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and
switches to more meaningful names for the irq related macros.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18 16:40:11 +01:00
Paulius Zaleckas
bd006a9bfe patch-mx1-UART-support
Adds support for MX1 architecture to UART driver.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:43 +01:00
Marc Kleine-Budde
9fbe604456 imx serial: fix rts handling for non imx1 based hardware
The interrupt handler for muxed interrupts (imx2/imx3) was calling
the rts handling subroutine if the RTSS bit was set.
(Which indicates the status of the RTS line), leading to an
interrupt flood on RTS bit low.

This patch fixes the problem by looking at the RTSD bit instead,
indicating a change in the RTS line.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02 10:19:30 +02:00
Marc Kleine-Budde
4411805b13 imx serial: set RXD mux bit on i.MX27 and i.MX31
RX in i.MX27 and i.MX31 UART lines does not work unless the
"RXD  Muxed Input Select" bit is set on i.MX27 and i.MX31 processors.

This patch sets the missing RXD mux bit in the UCR3 register.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02 10:19:29 +02:00
Darius Augulis
c45e7d7be8 i.MX serial: fix init failure
Adds extra "out" label to probe function after calling .init form platform data.
Because .init can return error number caused by gpio request fail.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02 10:19:29 +02:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King
be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Takashi Iwai
a88487c79b Fix compile errors in SGI console drivers (linux-next tree)
The below is the patch to replace blindly all possible places,
including Jack's fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
(Reviewed and checked rather than blindly added)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:12:36 -07:00
Sascha Hauer
604cbadce2 MX2 add support for mx2 in i.MX serial driver
add support for mx2 in i.MX serial driver

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:58 +02:00
Sascha Hauer
e3d13ff4b9 mxc: add MX3 support for i.MX internal UART driver
This patch adds MX3 support for the i.MX internal uart driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:48 +02:00
Sascha Hauer
38a41fdf94 IMX: introduce clock API
This patch introduces the clock API for i.MX and converts all
in-Kernel drivers to use it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:46 +02:00
Sascha Hauer
dbff4e9ea2 IMX UART: remove statically initialized tables
This patch removes the statically initialized tables from the i.MX serial
driver and makes the driver fully dependent on the information provided by
the platform_device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:45 +02:00
Sascha Hauer
2582d8c165 IMX UART: Add board specific init/exit functions
Add platform specific init functions. Also rename the struct
platform_device dev into pdev.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:45 +02:00
Sascha Hauer
036bb15ec9 IMX UART: do not assume 16MHz reference frequency
We assumed a 16MHz reference frequency for the UART. While this
is true for i.MX1 most of the time it is not true for MX27/MX31.
Also, add handling for the ONEMS register which is present on
newer versions of the chip and pass a sane minimum baudrate to
uart_get_baud_rate().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:44 +02:00
Russell King
cf816ecb53 Merge branch 'merge-fixes' into devel 2008-04-19 17:17:34 +01:00
Sascha Hauer
3a8daaa49f [ARM] 4999/1: <IMX UART>: fix membase
The membase field in struct uart_port should be the the physical
address. This patch fixes it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 16:22:22 +01:00
Sascha Hauer
3d454446e2 [ARM] 4998/1: <IMX UART>: do not use hardcoded io space size
Do not use hardcoded io space size. Instead use the information provided
by the resource.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 16:22:21 +01:00
Sascha Hauer
789d52589a [ARM] 4996/1: <IMX UART>: do not enable tx empty interrupt on startup
We are not interested in tranceiver empty interrupts until we actually
sent a buffer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 16:18:22 +01:00
Sascha Hauer
0d3c3938ff [ARM] 4995/1: <IMX UART>: Do not use URXD_CHARRDY for polling
Do not use the URXD_CHARRDY bit for polling for new characters. This works
on i.MX1, but on MX31 the datasheet states that this bit should not be
used for polling. On MX27 it is even worse, here we get a bus error when
we access the read FIFO when no character is present.
Instead, use USR2_RDR (receive data ready) bit.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 16:18:20 +01:00
Sascha Hauer
864eeed051 [ARM] 4994/1: <IMX UART>: Move error handling into execution path
Move the error handling code for erroneous receive characters into
execution path. This makes the code more readable and the compiler
should know how to optimize this, right?

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 16:18:19 +01:00
Sascha Hauer
8c9915bf31 [ARM] 4993/1: <IMX UART>: Trivial: Remove unused defines
This patch removes the unused defines NR_PORTS and IMX_ISR_PASS_LIMIT in
the imx serial driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 16:18:18 +01:00
Kay Sievers
e169c13964 serial: fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable serial
platform drivers, to re-enable auto loading.

NOTE that Kconfig for some of these drivers doesn't allow modular builds, and
thus doesn't match the driver source's unload support.  Presumably their
unload code is buggy and/or weakly tested...

[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:40 -07:00
Jeff Garzik
15aafa2f9d Remove pointless casts from void pointers
Mostly in and around irq handlers.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Karsten Keil <kkeil@suse.de>
Acked-by: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Sascha Hauer
4b300c362d [ARM] 4481/1: Fix a bug when i.MX is compiled as a module
Fix the unregistration order in the i.MX serial driver

Signed-off-by: Sreekrishnan Venkateswaran <krishhna@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:55:14 +01:00