Commit graph

187 commits

Author SHA1 Message Date
Al Viro
34c80b1d93 vfs: switch ->show_options() to struct dentry *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06 23:19:54 -05:00
Al Viro
6b520e0565 vfs: fix the stupidity with i_dentry in inode destructors
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Dan Magenheimer
e41d33af7c ocfs2: send correct UUID to cleancache initialization
ocfs2: Fix cleancache initialization call to correctly pass uuid

As reported by Steven Whitehouse in https://lkml.org/lkml/2011/5/27/221
the ocfs2 volume UUID is incorrectly passed to cleancache.
As a result, shared-ephemeral tmem pools will not actually
be created; instead they will be private (unshared) which
misses out on a major benefit of tmem.

Reported-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17 01:46:48 -08:00
Joel Becker
99b1bb61b2 Merge branch 'mw-3.1-jul25' of git://oss.oracle.com/git/smushran/linux-2.6 into ocfs2-fixes 2011-08-21 21:02:57 -07:00
Mark Fasheh
a11f7e63c5 ocfs2: serialize unaligned aio
Fix a corruption that can happen when we have (two or more) outstanding
aio's to an overlapping unaligned region.  Ext4
(e9e3bcecf4) and xfs recently had to fix
similar issues.

In our case what happens is that we can have an outstanding aio on a region
and if a write comes in with some bytes overlapping the original aio we may
decide to read that region into a page before continuing (typically because
of buffered-io fallback).  Since we have no ordering guarantees with the
aio, we can read stale or bad data into the page and then write it back out.

If the i/o is page and block aligned, then we avoid this issue as there
won't be any need to read data from disk.

I took the same approach as Eric in the ext4 patch and introduced some
serialization of unaligned async direct i/o.  I don't expect this to have an
effect on the most common cases of AIO.  Unaligned aio will be slower
though, but that's far more acceptable than data corruption.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-07-28 02:07:16 -07:00
Sunil Mushran
619c200de1 ocfs2: Clean up messages in the fs
Convert useful messages from ML_NOTICE to KERN_NOTICE to improve readability.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
2011-07-24 10:34:54 -07:00
Al Viro
9e1f1de02c more conservative S_NOSEC handling
Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.

AFAICS, the only reasonably sane way to deal with that is
	* new superblock flag; unless set, S_NOSEC is not going to be set.
	* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
	* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.

It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-03 18:24:58 -04:00
Tiger Yang
03efed8a2a ocfs2: Bugfix for hard readonly mount
ocfs2 cannot currently mount a device that is readonly at the media
("hard readonly").  Fix the broken places.
see detail: http://oss.oracle.com/bugzilla/show_bug.cgi?id=1322

[ Description edited -- Joel ]

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Reviewed-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-31 19:03:44 -07:00
Linus Torvalds
a74b81b0af Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits)
  Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly.
  ocfs2/dlm: Do not migrate resource to a node that is leaving the domain
  ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG
  Ocfs2/move_extents: Set several trivial constraints for threshold.
  Ocfs2/move_extents: Let defrag handle partial extent moving.
  Ocfs2/move_extents: move/defrag extents within a certain range.
  Ocfs2/move_extents: helper to calculate the defraging length in one run.
  Ocfs2/move_extents: move entire/partial extent.
  Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode.
  Ocfs2/move_extents: helper to probe a proper region to move in an alloc group.
  Ocfs2/move_extents: helper to validate and adjust moving goal.
  Ocfs2/move_extents: find the victim alloc group, where the given #blk fits.
  Ocfs2/move_extents: defrag a range of extent.
  Ocfs2/move_extents: move a range of extent.
  Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving.
  Ocfs2/move_extents: Add basic framework and source files for extent moving.
  Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2.
  Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c
  Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl.
  Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl.
  ...
2011-05-26 10:55:15 -07:00
Dan Magenheimer
1cfd8bd0f9 ocfs2: add cleancache support
This eighth patch of eight in this cleancache series "opts-in"
cleancache for ocfs2.  Clustered filesystems must explicitly enable
cleancache by calling cleancache_init_shared_fs anytime an instance
of the filesystem is mounted.  Ocfs2 is currently the only user of
the clustered filesystem interface but nevertheless, the cleancache
hooks in the VFS layer are sufficient for ocfs2 including the matching
cleancache_flush_fs hook which must be called on unmount.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v8: trivial merge conflict update]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Nitin Gupta <ngupta@vflare.org>
2011-05-26 10:02:08 -06:00
Tiger Yang
e2b0c215c2 ocfs2: clean up mount option about atime in ocfs2.txt
As ocfs2 supports relatime and strictatime, we need update the
relative document. Atime_quantum need work with strictatime, so only
show it in procfs when mount with strictatime.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-05-23 23:37:12 -07:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
03e4970c10 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits)
  Treat writes as new when holes span across page boundaries
  fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
  ocfs2/dlm: Move kmalloc() outside the spinlock
  ocfs2: Make the left masklogs compat.
  ocfs2: Remove masklog ML_AIO.
  ocfs2: Remove masklog ML_UPTODATE.
  ocfs2: Remove masklog ML_BH_IO.
  ocfs2: Remove masklog ML_JOURNAL.
  ocfs2: Remove masklog ML_EXPORT.
  ocfs2: Remove masklog ML_DCACHE.
  ocfs2: Remove masklog ML_NAMEI.
  ocfs2: Remove mlog(0) from fs/ocfs2/dir.c
  ocfs2: remove NAMEI from symlink.c
  ocfs2: Remove masklog ML_QUOTA.
  ocfs2: Remove mlog(0) from quota_local.c.
  ocfs2: Remove masklog ML_RESERVATIONS.
  ocfs2: Remove masklog ML_XATTR.
  ocfs2: Remove masklog ML_SUPER.
  ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c
  ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c
  ...

Fix up trivial conflict in fs/ocfs2/super.c
2011-03-28 13:03:31 -07:00
Linus Torvalds
bd2895eead Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix build failure introduced by s/freezeable/freezable/
  workqueue: add system_freezeable_wq
  rds/ib: use system_wq instead of rds_ib_fmr_wq
  net/9p: replace p9_poll_task with a work
  net/9p: use system_wq instead of p9_mux_wq
  xfs: convert to alloc_workqueue()
  reiserfs: make commit_wq use the default concurrency level
  ocfs2: use system_wq instead of ocfs2_quota_wq
  ext4: convert to alloc_workqueue()
  scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
  scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
  misc/iwmc3200top: use system_wq instead of dedicated workqueues
  i2o: use alloc_workqueue() instead of create_workqueue()
  acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
  fs/aio: aio_wq isn't used in memory reclaim path
  input/tps6507x-ts: use system_wq instead of dedicated workqueue
  cpufreq: use system_wq instead of dedicated workqueues
  wireless/ipw2x00: use system_wq instead of dedicated workqueues
  arm/omap: use system_wq in mailbox
  workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
2011-03-16 08:20:19 -07:00
Tao Ma
32a42d392b ocfs2: Remove masklog ML_SUPER.
Remove mlog(0) from fs/ocfs2/super.c and the masklog SUPER.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-23 21:29:08 +08:00
Wengang Wang
80a9a84da3 ocfs2: Add ocfs2_trace.h.
About one year ago, Wengang Wang tried some first steps
to add tracepoints to ocfs2. Hiss original patch is here:
http://oss.oracle.com/pipermail/ocfs2-devel/2009-November/005512.html

But as Steven Rostedt indicated in his article
http://lwn.net/Articles/383362/, we'd better have our trace
files resides in fs/ocfs2, so I rewrited the patch using the
method Steven mentioned in that article.

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21 11:13:14 +08:00
Tao Ma
c1e8d35ef5 ocfs2: Remove EXIT from masklog.
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
Tao Ma
ef6b689b63 ocfs2: Remove ENTRY from masklog.
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21 11:10:44 +08:00
Mark Fasheh
52c303c56c ocfs2: Check heartbeat mode for kernel stacks only
Commit 2c442719e9 added some checks for proper
heartbeat mode when the o2cb stack is running.  Unfortunately, it didn't
take into account that a userpsace stack could be running. Fix this by only
doing the check if o2cb is in use. This patch allows userspace stacks to
mount the fs again.

Cc: stable@kernel.org
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-02-20 02:36:28 -08:00
Tejun Heo
316873c958 ocfs2: use system_wq instead of ocfs2_quota_wq
ocfs2_quota_wq is not depended upon during memory reclaim and, with
cmwq, there's no reason to use a dedicated workqueue.  Drop
ocfs2_quota_wq and use system_wq instead.  dqi_sync_work is already
sync canceled on quota disable and no further synchronization is
necessary.

This change makes ocfs2_quota_setup/shutdown() noops.  Both functions
removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
2011-02-01 11:42:42 +01:00
Linus Torvalds
4843456c5c Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Fix deadlock during path resolution
2011-01-21 07:33:37 -08:00
Al Viro
ba87167c06 switch ocfs2, close races
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-12 20:02:46 -05:00
Jan Kara
f00c9e44ad quota: Fix deadlock during path resolution
As Al Viro pointed out path resolution during Q_QUOTAON calls to quotactl
is prone to deadlocks. We hold s_umount semaphore for reading during the
path resolution and resolution itself may need to acquire the semaphore
for writing when e. g. autofs mountpoint is passed.

Solve the problem by performing the resolution before we get hold of the
superblock (and thus s_umount semaphore). The whole thing is complicated
by the fact that some filesystems (OCFS2) ignore the path argument. So to
distinguish between filesystem which want the path and which do not we
introduce new .quota_on_meta callback which does not get the path. OCFS2
then uses this callback instead of old .quota_on.

CC: Al Viro <viro@ZenIV.linux.org.uk>
CC: Christoph Hellwig <hch@lst.de>
CC: Ted Ts'o <tytso@mit.edu>
CC: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-12 19:14:55 +01:00
Nick Piggin
fa0d7e3de6 fs: icache RCU free inodes
RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:26 +11:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Al Viro
152a083666 new helper: mount_bdev()
... and switch of the obvious get_sb_bdev() users to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:13 -04:00
Linus Torvalds
79f14b7c56 Merge branch 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
  BKL: remove BKL from freevxfs
  BKL: remove BKL from qnx4
  autofs4: Only declare function when CONFIG_COMPAT is defined
  autofs: Only declare function when CONFIG_COMPAT is defined
  ncpfs: Lock socket in ncpfs while setting its callbacks
  fs/locks.c: prepare for BKL removal
  BKL: Remove BKL from ncpfs
  BKL: Remove BKL from OCFS2
  BKL: Remove BKL from squashfs
  BKL: Remove BKL from jffs2
  BKL: Remove BKL from ecryptfs
  BKL: Remove BKL from afs
  BKL: Remove BKL from USB gadgetfs
  BKL: Remove BKL from autofs4
  BKL: Remove BKL from isofs
  BKL: Remove BKL from fat
  BKL: Remove BKL from ext2 filesystem
  BKL: Remove BKL from do_new_mount()
  BKL: Remove BKL from cgroup
  BKL: Remove BKL from NTFS
  ...
2010-10-22 10:52:01 -07:00
Joel Becker
fc3718918f Merge branch 'globalheartbeat-2' of git://oss.oracle.com/git/smushran/linux-2.6 into ocfs2-merge-window
Conflicts:
	fs/ocfs2/ocfs2.h
2010-10-15 13:03:09 -07:00
Tristan Ye
7bdb0d18bf ocfs2: Add a mount option "coherency=*" to handle cluster coherency for O_DIRECT writes.
Currently, the default behavior of O_DIRECT writes was allowing
concurrent writing among nodes to the same file, with no cluster
coherency guaranteed (no EX lock held).  This can leave stale data in
the cache for buffered reads on other nodes.

The new mount option introduce a chance to choose two different
behaviors for O_DIRECT writes:

    * coherency=full, as the default value, will disallow
                      concurrent O_DIRECT writes by taking
                      EX locks.

    * coherency=buffered, allow concurrent O_DIRECT writes
                          without EX lock among nodes, which
                          gains high performance at risk of
                          getting stale data on other nodes.

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-10-11 14:14:55 -07:00
Goldwyn Rodrigues
75d9bbc738 Initialize max_slots early
Functions such as ocfs2_recovery_init() make use of osb->max_slots.
Initialize osb->max_slots early so the functions may use the correct
value.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-10-11 13:56:32 -07:00
Sunil Mushran
2c442719e9 ocfs2: Add support for heartbeat=global mount option
Adds support for heartbeat=global mount option. It ensures that the heartbeat
mode passed matches the one enabled on disk.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
2010-10-07 15:23:50 -07:00
Sunil Mushran
98f486f23b ocfs2: Add an incompat feature flag OCFS2_FEATURE_INCOMPAT_CLUSTERINFO
OCFS2_FEATURE_INCOMPAT_CLUSTERINFO allows us to use sb->s_cluster_info for
both userspace and o2cb cluster stacks. It also allows us to extend cluster
info to include stack flags.

This patch also adds stackflags to sb->s_clusterinfo. It also introduces a
clusterinfo flag OCFS2_CLUSTER_O2CB_GLOBAL_HEARTBEAT to denote the enabled
global heartbeat mode.

This incompat flag can be set/cleared using tunefs.ocfs2 --fs-features. The
clusterinfo flag is set/cleared using tunefs.ocfs2 --update-cluster-stack.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
2010-10-09 10:24:46 -07:00
Arnd Bergmann
6005679412 BKL: Remove BKL from OCFS2
The BKL in ocfs2/dlmfs is used in put_super, fill_super and remount_fs
that are all three protected by the superblocks s_umount rw_semaphore.

The use in ocfs2_control_open is evidently unrelated and the function
is protected by ocfs2_control_lock.

Therefore it is safe to remove the BKL entirely.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
2010-10-04 21:10:51 +02:00
Jan Blunck
db71922217 BKL: Explicitly add BKL around get_sb/fill_super
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.

I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.

do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.

Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.

[arnd: do not add the BKL to those file systems that already
       don't use it elsewhere]

Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-04 21:10:10 +02:00
Tao Ma
b4d693fcc5 ocfs2: Cache system inodes of other slots.
Durring orphan scan, if we are slot 0, and we are replaying
orphan_dir:0001, the general process is that for every file
in this dir:
1. we will iget orphan_dir:0001, since there is no inode for it.
   we will have to create an inode and read it from the disk.
2. do the normal work, such as delete_inode and remove it from
   the dir if it is allowed.
3. call iput orphan_dir:0001 when we are done. In this case,
   since we have no dcache for this inode, i_count will
   reach 0, and VFS will have to call clear_inode and in
   ocfs2_clear_inode we will checkpoint the inode which will let
   ocfs2_cmt and journald begin to work.
4. We loop back to 1 for the next file.

So you see, actually for every deleted file, we have to read the
orphan dir from the disk and checkpoint the journal. It is very
time consuming and cause a lot of journal checkpoint I/O.
A better solution is that we can have another reference for these
inodes in ocfs2_super. So if there is no other race among
nodes(which will let dlmglue to checkpoint the inode), for step 3,
clear_inode won't be called and for step 1, we may only need to
read the inode for the 1st time. This is a big win for us.

So this patch will try to cache system inodes of other slots so
that we will have one more reference for these inodes and avoid
the extra inode read and journal checkpoint.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 08:56:24 -07:00
Patrick J. LoPresti
3bdb8efd94 OCFS2: Allow huge (> 16 TiB) volumes to mount
The OCFS2 developers have already done all of the hard work to allow
volumes larger than 16 TiB.  But there is still a "sanity check" in
fs/ocfs2/super.c that prevents the mounting of such volumes, even when
the cluster size and journal options would allow it.

This patch replaces that sanity check with a more sophisticated one to
mount a huge volume provided that (a) it is addressable by the raw
word/address size of the system (borrowing a test from ext4); (b) the
volume is using JBD2; and (c) the JBD2_FEATURE_INCOMPAT_64BIT flag is
set on the journal.

I factored out the sanity check into its own function.  I also moved it
from ocfs2_initialize_super() down to ocfs2_check_volume(); any earlier,
and the journal will not have been initialized yet.

This patch is one of a pair, and it depends on the other ("JBD2: Allow
feature checks before journal recovery").

I have tested this patch on small volumes, huge volumes, and huge
volumes without 64-bit block support in the journal.  All of them appear
to work or to fail gracefully, as appropriate.

Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 08:42:10 -07:00
Linus Torvalds
5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Al Viro
066d92dcbf convert ocfs2 to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:21 -04:00
Jiri Kosina
f1bbbb6912 Merge branch 'master' into for-next 2010-06-16 18:08:13 +02:00
Uwe Kleine-König
421f91d21a fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:05:05 +02:00
Christoph Hellwig
287a80958c quota: rename default quotactl methods to dquot_
Follow the dquot_* style used elsewhere in dquot.c.

[Jan Kara: Fixed up missing conversion of ext2]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:10:17 +02:00
Christoph Hellwig
307ae18a56 quota: drop remount argument to ->quota_on and ->quota_off
Remount handling has fully moved into the filesystem, so all this is
superflous now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:09:12 +02:00
Christoph Hellwig
0f0dd62fdd quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly.  Also rename vfs_quota_disable to
dquot_disable while we're at it.

[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:06:40 +02:00
Jan Kara
eea7feb072 ocfs2: Fix use after free on remount read-only
We also have to cancel quota syncing thread on remount read only because
at that moment quota is being turned off. Otherwise quota syncing thread
will try to access already freed quota structures.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:06:39 +02:00
Jan Kara
c06bcbfa1e ocfs2: Fix lock inversion in quotas during umount
We cannot cancel delayed work from ocfs2_local_free_info because that is called
with dqonoff_mutex held and the work it cancels requires dqonoff_mutex to
finish. Cancel the work before acquiring dqonoff_mutex.

Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:48 +02:00
Joel Becker
41841b0bce Merge branch 'discontig-bg' of git://oss.oracle.com/git/tma/linux-2.6 into ocfs2-merge-window 2010-05-18 16:40:42 -07:00
Joel Becker
e4b963f10e ocfs2: Wrap signal blocking in void functions.
ocfs2 sometimes needs to block signals around dlm operations, but it
currently does it with sigprocmask().  Even worse, it's checking the
error code of sigprocmask().  The in-kernel sigprocmask() can only error
if you get the SIG_* argument wrong.  We don't.

Wrap the sigprocmask() calls with ocfs2_[un]block_signals().  These
functions are void, but they will BUG() if somehow sigprocmask() returns
an error.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-10 11:50:10 -07:00
Sunil Mushran
4b37fcb7d4 ocfs2: Make nointr a default mount option
OCFS2 has never really supported intr. This patch acknowledges this reality
and makes nointr the default mount option. In a later patch, we intend to
support intr.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:08 -07:00
Mark Fasheh
83f92318fa ocfs2: Add dir_resv_level mount option
The default behavior for directory reservations stays the same, but we add a
mount option so people can tweak the size of directory reservations
according to their workloads.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:07 -07:00
Mark Fasheh
6b82021b9e ocfs2: increase the default size of local alloc windows
I have observed that the current size of 8M gives us pretty poor
fragmentation on multi-threaded workloads which do lots of writes.

Generally, I can increase the size of local alloc windows and observe a
marked decrease in fragmentation, even up and beyond window sizes of 512
megabytes. This makes sense for a couple reasons - larger local alloc means
more room for reservation windows. On multi-node workloads the larger local
alloc helps as well because we don't have to do window slides as often.

Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no
longer used and the comment above it was out of date.

To test fragmentation, I used a workload which launched 4 threads that did
4k writes into a series of about 140 alternating files.

With resv_level=2, and a 4k/4k file system I observed the following average
fragmentation for various localalloc= parameters:

localalloc=	avg. fragmentation
	8		48
	32		16
	64		10
	120		7

On larger cluster sizes, the difference is more dramatic.

The new default size top out at 256M, which we'll only get for cluster
sizes of 32K and above.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:07 -07:00