Commit graph

1952 commits

Author SHA1 Message Date
Namhyung Kim
fcde90759a md/raid5: remove unusual use of bio_iovec_idx()
In the bio_for_each_segment loop, bvl always points current
bio_vec, so the same as bio_iovec_idx(, i). Let's get rid of
it.

Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-14 14:23:57 +10:00
Namhyung Kim
b062962edb md/raid5: fix FUA request handling in ops_run_io()
Commit e9c7469bb4 ("md: implment REQ_FLUSH/FUA support")
introduced R5_WantFUA flag and set rw to WRITE_FUA in that case.
However remaining code still checks whether rw is exactly same
as WRITE or not, so FUAed-write ends up with being treated as
READ. Fix it.

This bug has been present since 2.6.37 and the fix is suitable for any
-stable kernel since then.  It is not clear why this has not caused
more problems.

Cc: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-14 14:20:19 +10:00
Namhyung Kim
9b2dc8b665 md/raid5: fix raid5_set_bi_hw_segments
The @bio->bi_phys_segments consists of active stripes count in the
lower 16 bits and processed stripes count in the upper 16 bits. So
logical-OR operator should be bitwise one.

This bug has been present since 2.6.27 and the fix is suitable for any
-stable kernel since then.  Fortunately the bad code is only used on
error paths and is relatively unlikely to be hit.

Cc: stable@kernel.org
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-14 14:09:41 +10:00
Namhyung Kim
97b3d4aacf md/bitmap: remove unused fields from struct bitmap
Get rid of ->syncchunk and ->counter_bits since they're never used.

Also discard COUNTER_BYTE_RATIO which is unused.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09 11:43:01 +10:00
Namhyung Kim
27d5ea04d0 md/bitmap: use proper accessor macro
Use COUNTER()/NEEDED() macro instead of open-coding them.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09 11:42:57 +10:00
Namhyung Kim
01393f3d58 md: check ->hot_remove_disk when removing disk
Check pers->hot_remove_disk instead of pers->hot_add_disk in slot_store()
during disk removal. The linear personality only has ->hot_add_disk and
no ->hot_remove_disk, so that removing disk in the array resulted to
following kernel bug:

$ sudo mdadm --create /dev/md0 --level=linear --raid-devices=4 /dev/loop[0-3]
$ echo none | sudo tee /sys/block/md0/md/dev-loop2/slot
 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<          (null)>]           (null)
 PGD c9f5d067 PUD 8575a067 PMD 0
 Oops: 0010 [#1] SMP
 CPU 2
 Modules linked in: linear loop bridge stp llc kvm_intel kvm asus_atk0110 sr_mod cdrom sg

 Pid: 10450, comm: tee Not tainted 3.0.0-rc1-leonard+ #173 System manufacturer System Product Name/P5G41TD-M PRO
 RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
 RSP: 0018:ffff880085757df0  EFLAGS: 00010282
 RAX: ffffffffa00168e0 RBX: ffff8800d1431800 RCX: 000000000000006e
 RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff88008543c000
 RBP: ffff880085757e48 R08: 0000000000000002 R09: 000000000000000a
 R10: 0000000000000000 R11: ffff88008543c2e0 R12: 00000000ffffffff
 R13: ffff8800b4641000 R14: 0000000000000005 R15: 0000000000000000
 FS:  00007fe8c9e05700(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 00000000b4502000 CR4: 00000000000406e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process tee (pid: 10450, threadinfo ffff880085756000, task ffff8800c9f08000)
 Stack:
  ffffffff8138496a ffff8800b4641000 ffff88008543c268 0000000000000000
  ffff8800b4641000 ffff88008543c000 ffff8800d1431868 ffffffff81a78a90
  ffff8800b4641000 ffff88008543c000 ffff8800d1431800 ffff880085757e98
 Call Trace:
  [<ffffffff8138496a>] ? slot_store+0xaa/0x265
  [<ffffffff81384bae>] rdev_attr_store+0x89/0xa8
  [<ffffffff8115a96a>] sysfs_write_file+0x108/0x144
  [<ffffffff81106b87>] vfs_write+0xb1/0x10d
  [<ffffffff8106e6c0>] ? trace_hardirqs_on_caller+0x111/0x135
  [<ffffffff81106cac>] sys_write+0x4d/0x77
  [<ffffffff814fe702>] system_call_fastpath+0x16/0x1b
 Code:  Bad RIP value.
 RIP  [<          (null)>]           (null)
  RSP <ffff880085757df0>
 CR2: 0000000000000000
 ---[ end trace ba5fc64319a826fb ]---

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09 11:42:54 +10:00
马建朋
9864c0053d md: Using poll /proc/mdstat can monitor the events of adding a spare disks
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09 11:42:48 +10:00
Jonathan Brassow
d744540cd3 MD: use is_power_of_2 macro
Make use of is_power_of_2 macro.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09 11:42:36 +10:00
Jonathan Brassow
d6b212f4b1 MD: raid5 do not set fullsync
Add check to determine if a device needs full resync or if partial resync will do

RAID 5 was assuming that if a device was not In_sync, it must undergo a full
resync.  We add a check to see if 'saved_raid_disk' is the same as 'raid_disk'.
If it is, we can safely skip the full resync and rely on the bitmap for
partial recovery instead.  This is the legitimate purpose of 'saved_raid_disk',
from md.h:
int saved_raid_disk;            /* role that device used to have in the
                                 * array and could again if we did a partial
                                 * resync from the bitmap
                                 */

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09 11:42:29 +10:00
Jonathan Brassow
9c81075f43 MD: support initial bitmap creation in-kernel
Add bitmap support to the device-mapper specific metadata area.

This patch allows the creation of the bitmap metadata area upon
initial array creation via device-mapper.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09 11:41:36 +10:00
Jonathan Brassow
076f968b37 MD: add sync_super to mddev_t struct
Add the 'sync_super' function pointer to MD array structure (struct mddev_s)

If device-mapper (dm-raid.c) is to define its own on-disk superblock and be
able to load it, there must still be a way for MD to initiate superblock
updates.  The simplest way to make this happen is to provide a pointer in
the MD array structure that can be set by device-mapper (or other module)
with a function to do this.  If the function has been set, it will be used;
otherwise, the method with be looked up via 'super_types' as usual.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-08 15:11:31 +10:00
Jonathan Brassow
1ed7242e59 MD: raid1 changes to allow use by device mapper
MD RAID1: Changes to allow RAID1 to be used by device-mapper (dm-raid.c)

Added the necessary congestion function and conditionalize calls requiring an
array 'queue' or 'gendisk'.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-08 15:11:31 +10:00
Jonathan Brassow
0fd018af37 MD: move thread wakeups into resume
Move personality and sync/recovery thread starting outside md_run.

Moving the wakeup's of the personality and sync/recovery threads out of
md_run and into do_md_run and mddev_resume solves two issues:
1) It allows bitmap_load to be called before the sync_thread is run and
2) when MD personalities are used by device-mapper (dm-raid.c), the start-up
of the array is better alligned with device-mapper primatives
(CTR/resume/suspend/DTR).  I/O - in this case, recovery operations - should
not happen until after a resume has taken place.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-08 15:11:31 +10:00
Jonathan Brassow
ac42450c7c MD: possible typo
Make message a bit clearer by s/blocks/k/

I chose 'k' vs 'kiB' or 'kB' because it is what is used earlier in the
message.  'k' may be a bit ambigous, but I think it's better than "blocks"
which normally means 512, but means 1024 in MD.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-08 15:11:31 +10:00
Jonathan Brassow
68866e425b MD: no sync IO while suspended
Disallow resync I/O while the RAID array is suspended.

Recovery, resync, and metadata I/O should not be allowed while a device is
suspended.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-08 15:10:08 +10:00
Jonathan Brassow
629acb6aba MD: no integrity register if no gendisk
Don't attempt md_integrity_register if there is no gendisk struct available.

When MD arrays are built via device-mapper, the gendisk structure is not
available via mddev.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-08 15:10:08 +10:00
Mikulas Patocka
fa34ce7307 dm kcopyd: return client directly and not through a pointer
Return client directly from dm_kcopyd_client_create, not through a
parameter, making it consistent with dm_io_client_create.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:03:13 +01:00
Mikulas Patocka
5f43ba2950 dm kcopyd: reserve fewer pages
Reserve just the minimum of pages needed to process one job.

Because we allocate pages from page allocator, we don't need to reserve
a large number of pages.  The maximum job size is SUB_JOB_SIZE and we
calculate the number of reserved pages based on this.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:03:11 +01:00
Mikulas Patocka
bda8efec5c dm io: use fixed initial mempool size
Replace the arbitrary calculation of an initial io struct mempool size
with a constant.

The code calculated the number of reserved structures based on the request
size and used a "magic" multiplication constant of 4.  This patch changes
it to reserve a fixed number - itself still chosen quite arbitrarily.
Further testing might show if there is a better number to choose.

Note that if there is no memory pressure, we can still allocate an
arbitrary number of "struct io" structures.  One structure is enough to
process the whole request.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:03:09 +01:00
Mikulas Patocka
d04714580f dm kcopyd: alloc pages from the main page allocator
This patch changes dm-kcopyd so that it allocates pages from the main
page allocator with __GFP_NOWARN | __GFP_NORETRY flags (so that it can
fail in case of memory pressure). If the allocation fails, dm-kcopyd
allocates pages from its own reserve.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:03:07 +01:00
Mikulas Patocka
f99b55eec7 dm kcopyd: add gfp parm to alloc_pl
Introduce a parameter for gfp flags to alloc_pl() for use in following
patches.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:03:04 +01:00
Mikulas Patocka
4cc1b4cffd dm kcopyd: remove superfluous page allocation spinlock
Remove the spinlock protecting the pages allocation.  The spinlock is only
taken on initialization or from single-threaded workqueue.  Therefore, the
spinlock is useless.

The spinlock is taken in kcopyd_get_pages and kcopyd_put_pages.

kcopyd_get_pages is only called from run_pages_job, which is only
called from process_jobs called from do_work.

kcopyd_put_pages is called from client_alloc_pages (which is initialization
function) or from run_complete_job. run_complete_job is only called from
process_jobs called from do_work.

Another spinlock, kc->job_lock is taken each time someone pushes or pops
some work for the worker thread.  Once we take kc->job_lock, we
guarantee that any written memory is visible to the other CPUs.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:03:02 +01:00
Mikulas Patocka
c6ea41fbbe dm kcopyd: preallocate sub jobs to avoid deadlock
There's a possible theoretical deadlock in dm-kcopyd because multiple
allocations from the same mempool are required to finish a request.
Avoid this by preallocating sub jobs.

There is a mempool of 512 entries. Each request requires up to 9
entries from the mempool. If we have at least 57 concurrent requests
running, the mempool may overflow and mempool allocations may start
blocking until another entry is freed to the mempool. Because the same
thread is used to free entries to the mempool and allocate entries from
the mempool, this may result in a deadlock.

This patch changes it so that one mempool entry contains all 9 "struct
kcopyd_job" required to fulfill the whole request. The allocation is
done only once in dm_kcopyd_copy and no further mempool allocations are
done during request processing.

If dm_kcopyd_copy is not run in the completion thread, this
implementation is deadlock-free.

MIN_JOBS needs reducing accordingly and we've chosen to reduce it
further to 8.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:03:00 +01:00
Mikulas Patocka
a705a34a56 dm kcopyd: avoid pointless job splitting
Don't split SUB_JOB_SIZE jobs

If the job size equals SUB_JOB_SIZE, there is no point in splitting it.
Splitting it just unnecessarily wastes time, because the split job size
is SUB_JOB_SIZE too.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:02:58 +01:00
Martin K. Petersen
6f13f6fba7 dm mpath: do not fail paths after integrity errors
Integrity errors need to be passed to the owner of the integrity
metadata for processing. Consequently EILSEQ should be passed up the
stack.

Cc: stable@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:02:55 +01:00
Milan Broz
f4808ca99a dm table: reject devices without request fns
This patch adds a check that a block device has a request function
defined before it is used.  Otherwise, misconfiguration can cause an oops.

Because we are allowing devices with zero size e.g. an offline multipath
device as in commit 2cd54d9bed
("dm: allow offline devices") there needs to be an additional check
to ensure devices are initialised.  Some block devices, like a loop
device without a backing file, exist but have no request function.

Reproducer is trivial: dm-mirror on unbound loop device
(no backing file on loop devices)

dmsetup create x --table "0 8 mirror core 2 8 sync 2 /dev/loop0 0 /dev/loop1 0"

and mirror resync will immediatelly cause OOps.

BUG: unable to handle kernel NULL pointer dereference at   (null)
 ? generic_make_request+0x2bd/0x590
 ? kmem_cache_alloc+0xad/0x190
 submit_bio+0x53/0xe0
 ? bio_add_page+0x3b/0x50
 dispatch_io+0x1ca/0x210 [dm_mod]
 ? read_callback+0x0/0xd0 [dm_mirror]
 dm_io+0xbb/0x290 [dm_mod]
 do_mirror+0x1e0/0x748 [dm_mirror]

Signed-off-by: Milan Broz <mbroz@redhat.com>
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 13:02:52 +01:00
Mike Snitzer
4c25932701 dm table: allow targets to support discards internally
Permit a target to support discards regardless of whether or not all its
underlying devices do.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29 12:52:55 +01:00
Linus Torvalds
57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
NeilBrown
b098636cf0 md: allow resync_start to be set while an array is active.
The sysfs attribute 'resync_start' (known internally as recovery_cp),
records where a resync is up to.  A value of 0 means the array is
not known to be in-sync at all.  A value of MaxSector means the array
is believed to be fully in-sync.

When the size of member devices of an array (RAID1,RAID4/5/6) is
increased, the array can be increased to match.  This process sets
resync_start to the old end-of-device offset so that the new part of
the array gets resynced.

However with RAID1 (and RAID6) a resync is not technically necessary
and may be undesirable.  So it would be good if the implied resync
after the array is resized could be avoided.

So: change 'resync_start' so the value can be changed while the array
is active, and as a precaution only allow it to be changed while
resync/recovery is 'frozen'.  Changing it once resync has started is
not going to be useful anyway.

This allows the array to be resized without a resync by:
  write 'frozen' to 'sync_action'
  write new size to 'component_size' (this will set resync_start)
  write 'none' to 'resync_start'
  write 'idle' to 'sync_action'.

Also slightly improve some tests on recovery_cp when resizing
raid1/raid5.  Now that an arbitrary value could be set we should be
more careful in our tests.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 15:52:21 +10:00
NeilBrown
ab9d47e990 md/raid10: reformat some loops with less indenting.
When a loop ends with an 'if' with a large body, it is neater
to make the if 'continue' on the inverse condition, and then
the body is indented less.

Apply this pattern 3 times, and wrap some other long lines.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:41 +10:00
NeilBrown
f17ed07c85 md/raid10: remove unused variable.
This variable 'disk' is never used - how odd.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:32 +10:00
NeilBrown
a8830bcaf3 md/raid10: make more use of 'slot' in raid10d.
Now that we have a 'slot' variable, make better use of it to simplify
some code a little.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:54:19 +10:00
NeilBrown
7c4e06ff2b md/raid10: some tidying up in fix_read_error
Currently the rdev on which a read error happened could be removed
before we perform the fix_error handling.  This requires extra tests
for NULL.

So delay the rdev_dec_pending call until after the call to
fix_read_error so that we can be sure that the rdev still exists.

This allows an 'if' clause to be removed so the body gets re-indented
back one level.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:53:17 +10:00
NeilBrown
af6d7b760c md/raid1: improve handling of pages allocated for write-behind.
The current handling and freeing of these pages is a bit fragile.
We only keep the list of allocated pages in each bio, so we need to
still have a valid bio when freeing the pages, which is a bit clumsy.

So simply store the allocated page list in the r1_bio so it can easily
be found and freed when we are finished with the r1_bio.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:51:19 +10:00
NeilBrown
7ca78d57d1 md/raid1: try fix_sync_read_error before process_checks.
If we get a read error during resync/recovery we current repeat with
single-page reads to find out just where the error is, and possibly
read each page from a different device.

With check/repair we don't currently do that, we just fail.
However it is possible that while all devices fail on the large 64K
read, we might be able to satisfy each 4K from one device or another.

So call fix_sync_read_error before process_checks to maximise the
chance of finding good data and writing it out to the devices with
read errors.

For this to work, we need to set the 'uptodate' flags properly after
fix_sync_read_error has succeeded.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:50:37 +10:00
NeilBrown
78d7f5f726 md/raid1: tidy up new functions: process_checks and fix_sync_read_error.
These changes are mostly cosmetic:

1/ change mddev->raid_disks to conf->raid_disks because the later is
   technically safer, though in current practice it doesn't matter in
   this particular context.
2/ Rearrange two for / if loops to have an early 'continue' so the
   body of the 'if' doesn't need to be indented so much.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:48:56 +10:00
NeilBrown
a68e587035 md/raid1: split out two sub-functions from sync_request_write
sync_request_write is too big and too deep.
So split out two self-contains bits of functionality into separate
function.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:40:44 +10:00
NeilBrown
6f8d0c77ce md: make error_handler functions more uniform and correct.
- there is no need to test_bit Faulty, as that was already done in
  md_error which is the only caller of these functions.
- MD_CHANGE_DEVS should be set *after* faulty is set to ensure
  metadata is updated correctly.
- spinlock should be held while updating ->degraded.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:38:44 +10:00
NeilBrown
92f861a72a md/multipath: discard ->working_disks in favour of ->degraded
conf->working_disks duplicates information already available
in mddev->degraded.
So remove working_disks.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:38:02 +10:00
NeilBrown
76073054c9 md/raid1: clean up read_balance.
read_balance has two loops which both look for a 'best'
device based on slightly different criteria.
This is clumsy and makes is hard to add extra criteria.

So replace it all with a single loop that combines everything.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:34:56 +10:00
NeilBrown
56d9912106 md: simplify raid10 read_balance
raid10 read balance has two different loop for looking through
possible devices to chose the best.
Collapse those into one loop and generally make the code more
readable.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:27:03 +10:00
NeilBrown
8258c53208 md/bitmap: fix saving of events_cleared and other state.
If a bitmap is found to be 'stale' the events_cleared value
is set to match 'events'.
However if the array is degraded this does not get stored on disk.
This can subsequently lead to incorrect behaviour.

So change bitmap_update_sb to always update events_cleared in the
superblock from the known events_cleared.
For neatness also set ->state from ->flags.
This requires updating ->state whenever we update ->flags, which makes
sense anyway.

This is suitable for any active -stable release.

cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:26:30 +10:00
NeilBrown
bedd86b777 md: reject a re-add request that cannot be honoured.
The 'add_new_disk' ioctl can be used to add a device either as a
spare, or as an active disk that just needs to be resynced based on
write-intent-bitmap information (re-add)

Currently if a re-add is requested but fails we add as a spare
instead.  This makes it impossible for user-space to check for
failure.

So change to require that a re-add attempt will either succeed or
completely fail.  User-space can then decide what to do next.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-05-11 14:26:20 +10:00
NeilBrown
b0140891a8 md: Fix race when creating a new md device.
There is a race when creating an md device by opening /dev/mdXX.

If two processes do this at much the same time they will follow the
call path
  __blkdev_get -> get_gendisk -> kobj_lookup

The first will call
  -> md_probe -> md_alloc -> add_disk -> blk_register_region

and the race happens when the second gets to kobj_lookup after
add_disk has called blk_register_region but before it returns to
md_alloc.

In the case the second will not call md_probe (as the probe is already
done) but will get a handle on the gendisk, return to __blkdev_get
which will then call md_open (via the ->open) pointer.

As mddev->gendisk hasn't been set yet, md_open will think something is
wrong an return with ERESTARTSYS.

This can loop endlessly while the first thread makes no progress
through add_disk.  Nothing is blocking it, but due to scheduler
behaviour it doesn't get a turn.
So this is essentially a live-lock.

We fix this by simply moving the assignment to mddev->gendisk before
the call the add_disk() so md_open doesn't get confused.
Also move blk_queue_flush earlier because add_disk should be as late
as possible.

To make sure that md_open doesn't complete until md_alloc has done all
that is needed, we take mddev->open_mutex during the last part of
md_alloc.  md_open will wait for this.

This can cause a lock-up on boot so Cc:ing for stable.
For 2.6.36 and earlier a different patch will be needed as the
'blk_queue_flush' call isn't there.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Tested-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Cc: stable@kernel.org
2011-05-11 14:26:17 +10:00
Jesper Juhl
aeb878b096 md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
There's a small typo in a comment in drivers/md/raid5.c - 'Of course' is
misspelled as 'Ofcourse'. This patch fixes the spelling error.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-10 10:18:36 +02:00
Randy Dunlap
d76c8420c3 raid5: fix build error, sector_t usage
Change <sectors> from unsigned long long to sector_t.
This matches its source field.

  ERROR: "__udivdi3" [drivers/md/raid456.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-21 10:00:00 -07:00
Krzysztof Wojcik
fee68723cf md: Cleanup after raid45->raid0 takeover
Problem:
After raid4->raid0 takeover operation, another takeover operation
(e.g raid0->raid10) results "kernel oops".
Root cause:
Variables 'degraded' in mddev structure is not cleared
on raid45->raid0 takeover.

This patch reset this variable.

Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-20 15:39:53 +10:00
NeilBrown
3b71bd9337 md: Fix dev_sectors on takeover from raid0 to raid4/5
A raid0 array doesn't set 'dev_sectors' as each device might
contribute a different number of sectors.
So when converting to a RAID4 or RAID5 we need to set dev_sectors
as they need the number.
We have already verified that in fact all devices do contribute
the same number of sectors, so use that number.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-20 15:38:18 +10:00
NeilBrown
2b7da309ff md/raid5: remove setting of ->queue_lock
We previously needed to set ->queue_lock to match the raid5
device_lock so we could safely use queue_flag_* operations (e.g. for
plugging). which test the ->queue_lock is in fact locked.

However that need has completely gone away and is unlikely to come
back to remove this now-pointless setting.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-20 15:38:07 +10:00
NeilBrown
c3b328ac84 md: fix up raid1/raid10 unplugging.
We just need to make sure that an unplug event wakes up the md
thread, which is exactly what mddev_check_plugged does.

Also remove some plug-related code that is no longer needed.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18 18:25:43 +10:00