Commit graph

195 commits

Author SHA1 Message Date
Paul Mundt
3cc000b583 sh: Plug in support for ARCH=sh64 using sh SRCARCH.
This adds in support for building with ARCH=sh64 using the sh SRCARCH.
This tidies up the randconfig generation somewhat to make sure that we
don't end up with impossible configurations, and without having to rely
on things like KCONFIG_ALLCONFIG to detect the proper CPU support subset.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-11 08:39:27 +09:00
Paul Mundt
f802d969b6 sh: Add support for DMA API debugging.
This wires up support for the generic DMA API debugging.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-09 10:36:54 -07:00
Linus Torvalds
45e36c1666 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: sh7785lcr: Map whole PCI address space.
  sh: Fix up DSP context save/restore.
  sh: Fix up number of on-chip DMA channels on SH7091.
  sh: update defconfigs.
  sh: Kill off broken direct-mapped cache mode.
  sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
  sh: Add a command line option for disabling I/O trapping.
  sh: Select ARCH_HIBERNATION_POSSIBLE.
  sh: migor: Fix up CEU use flags.
  input: migor_ts: add wakeup support
  rtc: rtc-sh: use set_irq_wake()
  input: sh_keysc: use enable/disable_irq_wake()
  sh: intc: set_irq_wake() support
  sh: intc: install enable, disable and shutdown callbacks
  clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
  sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
  sh: Fix up -Wformat-security whining.
  sh: ap325rxa: Add ov772x support, again.
  sh: Sanitize asm/mmu.h for assembly use.
  sh: Tidy up sh7786 pinmux table.
  ...
2009-04-05 11:15:54 -07:00
Paul Mundt
e869a90ee1 sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
cpuidle wants ARCH_HAS_DEFAULT_IDLE defined in order to use the
default idle loop. So, make it accessible and enable it for all
sh machines.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02 13:08:31 +09:00
Paul Mundt
8dafc34616 sh: Select ARCH_HIBERNATION_POSSIBLE.
Now that the requisite patches have gone in, this can safely be enabled
across the board for all of the 32-bit SH platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02 11:56:38 +09:00
Nobuhiro Iwamatsu
f36b59d1a4 sh: Add MMU dependency for kexec
Kexec is not likely to work on NON-MMU CPU because this added
depend on MMU for kexec.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31 07:38:37 +09:00
Matt LaPlante
692105b8ac trivial: fix typos/grammar errors in Kconfig texts
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:01 +02:00
Magnus Damm
b7cf6ddc13 sh: add kexec jump support
Add kexec jump support to the SuperH architecture.

Similar to the x86 implementation, with the following
exceptions:

- Instead of separating the assembly code flow into
two parts for regular kexec and kexec jump we use a
single code path. In the assembly snippet regular
kexec is just kexec jump that never comes back.

- Instead of using a swap page when moving data between
pages the page copy assembly routine has been modified
to exchange the data between the pages using registers.

- We walk the page list twice in machine_kexec() to
do and undo physical to virtual address conversion.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-18 18:57:43 +09:00
Paul Mundt
8263a67e16 sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.
This adds support for extended ASIDs (up to 16-bits) on newer SH-X3 cores
that implement the PTAEX register and respective functionality. Presently
only the 65nm SH7786 (90nm only supports legacy 8-bit ASIDs).

The main change is in how the PTE is written out when loading the entry
in to the TLB, as well as in how the TLB entry is selectively flushed.

While SH-X2 extended mode splits out the memory-mapped U and I-TLB data
arrays for extra bits, extended ASID mode splits out the address arrays.
While we don't use the memory-mapped data array access, the address
array accesses are necessary for selective TLB flushes, so these are
implemented newly and replace the generic SH-4 implementation.

With this, TLB flushes in switch_mm() are almost non-existent on newer
parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17 17:49:49 +09:00
Magnus Damm
7759491274 sh: SuperH Mobile suspend support
This patch contains CONFIG_SUSPEND support to the SuperH
architecture. If enabled, SuperH Mobile processors will
register their suspend callbacks during boot.

To suspend, use "echo mem > /sys/power/state". To allow
wakeup, make sure "/sys/device/platform/../power/wakeup"
contains "enabled". Additional per-device driver patches
are most likely needed.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-16 19:52:53 +09:00
Paul Mundt
dc65a977ce sh: Define ARCH_SHMOBILE for SH-Mobile CPUs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 16:26:29 +09:00
Paul Mundt
a4b1fddcd4 sh: Set a sensible default for the SH7786 pclk.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-05 17:52:34 +09:00
Paul Mundt
37042fbd8b sh: SH7786 is an SH-X3 core, select CPU_SHX3.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03 15:57:02 +09:00
Kuninori Morimoto
55ba99eb21 sh: Add support for SH7786 CPU subtype.
This adds preliminary support for the SH7786 CPU subtype.

While this is a dual-core CPU, only UP is supported for now. L2 cache
support is likewise not yet implemented.

More information on this particular CPU subtype is available at:

	http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03 15:40:25 +09:00
Paul Mundt
508eb2ce22 sh: Restrict old CMT timer code to SH-2/SH-2A.
None of the other platforms use this, and need individual porting.
Restrict it back to the supported set of CPU subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-04 15:28:06 +09:00
Paul Mundt
c161e40f45 sh: Don't enable GENERIC_TIME for the CMT clockevent driver yet.
GENERIC_TIME still depends on the clocksource bits being there, which is
presently not supported. This allows the CMT clockevent driver to be used
alongside alternate system timers that do not yet provide a clocksource
of their own (MTU2 and so on in the case of SH-2A).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 18:11:25 +09:00
Paul Mundt
d63f3a5857 sh: Fix up MTU2 support for SH7203.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 18:10:13 +09:00
Paul Mundt
f5ad881b42 sh: Use SYS_SUPPORTS_CMT for managing CMT timer dependencies.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 18:08:58 +09:00
Magnus Damm
3fb1b6ad06 sh: CMT clockevent platform driver
SuperH CMT clockevent driver.

Both 16-bit and 32-bit CMT versions are supported, but only 32-bit
is tested. This driver contains support for both clockevents and
clocksources, but no unregistration is supported at this point.

Works fine as clock source and/or event in periodic or oneshot mode.
Tested on sh7722 and sh7723, but should work with any cpu/architecture.

This version is lacking clocksource and early platform driver support
for now - this to minimize the amount of dependencies.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 16:56:32 +09:00
Paul Mundt
ae5e6d05a6 sh: mach-highlander and mach-rsk require gpiolib.
Fix up the build for mach-highlander and mach-rsk. These operated on the
assumption that GENERIC_GPIO support with an optional GPIOLIB was
possible. This used to be true, but has not been the case since commit-id
d56cc8bc661ac1ceded8d45ba2d53bb134fee17d ("sh: use gpiolib"), where the
GENERIC_GPIO implementation was rewritten to use GPIOLIB directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27 14:49:10 +09:00
Magnus Damm
69edbba002 sh: use gpiolib
This patch updates the SuperH gpio code to make use of gpiolib. The
gpiolib callbacks get() and set() are lockless, but we use our own
spinlock for the other operations to make sure hardware register
bitfield accesses stay atomic.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-27 14:49:10 +09:00
Paul Mundt
e16038aba3 sh: Kill off obsolete busses from arch/sh/Kconfig.
ISA can go away now that the hd6446x PCMCIA drivers no longer exist
in-tree. The rationale for enabling CONFIG_ISA in the first place is
likewise no longer valid given that the subsystem has changed since
the time that assertion was valid.

While we are at it, kill off SBUS, MCA, EISA, and so on. These are
not supported and never will be.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:44:01 +09:00
Paul Mundt
78fb40263f sh: dma: Kill off ISA DMA wrapper.
There are no more users for this code, and it has been deprecated for
some time, so just kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt
8a655053ca doc: Update sh cpufreq documentation.
The sh cpufreq driver is no longer limited to just the SH-3 and SH-4,
update the documentation to reflect this fact accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt
073da9c0de sh: Kill off cf-enabler with extreme prejudice.
Now that the rest of the boards that were using cf-enabler "generically"
have switched to setting up their mappings on their own, only the mach-se
boards were left using it. All of the cf-enabler using mach-se boards
use a special initialization of the MRSHPC windows rather than going
through the special PTE as other SH-4 platforms do. This consolidates
the MRSHPC setup logic, hooks it up on the boards that care, and gets rid
of any and all remaining references to cf-enabler.

This has been long overdue, as cf-enabler has been the bane of
arch/sh/kernel for the last 7 years. Good riddance.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt
8db806ec80 sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.
This gets rid of the cf enabler use on mach-sh03 and switches to use
pata_platform with the proper address directly. cf_enabler is
subsequently disabled for mach-sh03.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Matt Fleming
70fe224743 sh: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH machines
After the recent changes to switch SuperH board support over to irq_chip
it is now possible to set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH
boards.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:42 +09:00
Paul Mundt
ab6e570ba3 sh: Generic kgdb stub support.
This migrates from the old bitrotted kgdb stub implementation and moves
to the generic stub. In the process support for SH-2/SH-2A is also added,
which the old stub never provided.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt
d7b01f78a3 sh: Enable HAVE_ARCH_TRACEHOOK for all SH, now that SH-5 supports it too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Magnus Damm
c6f17cb227 sh: allow CONFIG_CPU_IDLE
Allow users to select CONFIG_CPU_IDLE regardless of processor type or board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:52 +09:00
Magnus Damm
af998a9a0a sh: allow CONFIG_PM
Allow users to select CONFIG_PM regardless of processor type or board.
Suspend and hibernation are only allowed on supported platforms.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:52 +09:00
Peter Griffin
2825999e8a sh: Add support for SH7201 CPU subtype.
This patch adds support for the SH-2A FPU based SH7201 processor subtype.

Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:50 +09:00
Matt Fleming
fad57feba7 sh: dynamic ftrace support.
First cut at dynamic ftrace support.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Paul Mundt
f9d62c0096 sh: Disable GENERIC_HARDIRQS_NO__DO_IRQ for unconverted platforms.
Presently limited to Cayman, Dreamcast, Microdev, and SystemH 7751.
Re-enable it for everyone once these have been fixed up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-16 16:42:53 +09:00
Paul Mundt
694f94f263 sh: FTRACE renamed to FUNCTION_TRACER.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31 16:20:36 +09:00
Linus Torvalds
ed402af3c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits)
  sh: Move SH-4 CPU headers down one more level.
  sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected.
  sh: Migrate common board headers to mach-common/.
  sh: Move the CPU definition headers from asm/ to cpu/.
  serial: sh-sci: Add support SCIF of SH7723
  video: add sh_mobile_lcdc platform flags
  video: remove unused sh_mobile_lcdc platform data
  sh: remove consistent alloc cruft
  sh: add dynamic crash base address support
  sh: reduce Migo-R smc91x overruns
  sh: Fix up some merge damage.
  Fix debugfs_create_file's error checking method for arch/sh/mm/
  Fix debugfs_create_dir's error checking method for arch/sh/kernel/
  sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board
  sh: Use sh7720 GPIO on magicpanelr2 board
  sh: Add sh7720 pinmux code
  sh: Use sh7203 GPIO on rsk7203 board
  sh: Add sh7203 pinmux code
  sh: Use sh7723 GPIO on AP325RXA board
  sh: Add sh7723 pinmux code
  ...
2008-10-20 09:13:34 -07:00
Matt Helsley
dc52ddc0e6 container freezer: implement freezer cgroup subsystem
This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:34 -07:00
Magnus Damm
2967dab1ae sh: GPIO and pinmux base code
This patch adds gpio code together with the pinmux table parser.
In the future we should optimize this and switch back to gpiolib.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:33:50 +09:00
Paul Mundt
bdeb3be7cc sh: Use clk fwk for preset lpj on sh64, too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 20:14:44 +09:00
Paul Mundt
e7ab3cd251 sh: Add FPU registers to regset interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 19:04:55 +09:00
Paul Mundt
9d2b1f81dd sh: ftrace support.
This adds support for ftrace to SH. This only includes CONFIG_FTRACE,
and does not handle dynamic ftrace presently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 16:43:45 +09:00
Paul Mundt
2194478157 sh: HAVE_IOREMAP_PROT depends on MMU.
HAVE_IOREMAP_PROT enables an unconditional reference to
generic_access_phys(), which remains undefined in the nommu case.
As there's no point in supporting this there anyways, simply fix
up the dependency.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:26:44 +09:00
Paul Mundt
5a89f1adbc sh: latencytop support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-13 01:44:03 +09:00
Paul Mundt
5dadb34394 sh: Add DSP registers to regset interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:42:10 +09:00
Paul Mundt
3231739d97 sh: Enable HAVE_ARCH_TRACEHOOK.
Now that the rest of the support requirements are out of the way, finally
enable support for tracehook.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:13:36 +09:00
Paul Mundt
cb700aa4f1 sh: ioremap_prot support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 20:41:05 +09:00
Paul Mundt
cf204fa797 sh: Derive calibrate_delay lpj from clk fwk.
All CPUs must have a sensible cpu_clk definition these days, which we can
safely use for deriving the preset loops_per_jiffy. The only odd one out
is SH-5, which hasn't been hammered in to the framework yet.

Based on the ST patch.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Carl Shaw <carl.shaw@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 20:47:42 +09:00
Paul Mundt
fc63562ac2 sh: Disable seccomp support by default.
This was initially checked in with a stupid default of y, while most
everyone is going to want to have this disabled anyways.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 12:10:35 +09:00
Chris Smith
d39f545014 sh: Add kprobes support.
Initial support for kprobes/kretprobes for 32-bit SH platforms.

[ General cleanup and some rework for the kretprobe hash lock. -- PFM ]

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:05 +09:00
Paul Mundt
5840263ecb sh: Don't enable clockevents broadcasting on UP SH-X3 builds.
Fixes up compile errors with missing timer definitions. It's pointless to
have this enabled anyways if CONFIG_SMP=n.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00