Commit graph

1151 commits

Author SHA1 Message Date
Jens Axboe
a4e7d46407 block: always assign default lock to queues
Move the assignment of a default lock below blk_init_queue() to
blk_queue_make_request(), so we also get to set the default lock
for ->make_request_fn() based drivers. This is important since the
queue flag locking requires a lock to be in place.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-28 09:07:29 +02:00
Xiaotian Feng
9cb308ce8d block: sysfs fix mismatched queue_var_{store,show} in 64bit kernel
In blk-sysfs.c, queue_var_store uses unsigned long to store data,
but queue_var_show uses unsigned int to show data.  This causes,

	# echo 70000000000 > /sys/block/<dev>/queue/read_ahead_kb
	# cat /sys/block/<dev>/queue/read_ahead_kb => get wrong value

Fix it by using unsigned long.

While at it, convert queue_rq_affinity_show() such that it uses bool
variable instead of explicit != 0 testing.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-07-17 16:54:15 +09:00
Tejun Heo
0a09f4319c block: fix failfast merge testing in elv_rq_merge_ok()
Commit ab0fd1debe tries to prevent merge
of requests with different failfast settings.  In elv_rq_merge_ok(),
it compares new bio's failfast flags against the merge target
request's.  However, the flag testing accessors for bio and blk don't
return boolean but the tested bit value directly and FAILFAST on bio
and blk don't match, so directly comparing them with == results in
false negative unnecessary preventing merge of readahead requests.

This patch convert the results to boolean by negating them before
comparison.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Garzik <jeff@garzik.org>
2009-07-17 14:50:43 +09:00
Vivek Goyal
32f2e807a3 cfq-iosched: reset oom_cfqq in cfq_set_request()
In case memory is scarce, we now default to oom_cfqq. Once memory is
available again, we should allocate a new cfqq and stop using oom_cfqq for
a particular io context.

Once a new request comes in, check if we are using oom_cfqq, and if yes,
try to allocate a new cfqq.

Tested the patch by forcing the use of oom_cfqq and upon next request thread
realized that it was using oom_cfqq and it allocated a new cfqq.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:54 +02:00
FUJITA Tomonori
76da03467a block: call blk_scsi_ioctl_init()
Currently, blk_scsi_ioctl_init() is not called since it lacks
an initcall marking. This causes the command table to be
unitialized, hence somce commands are block when they should
not have been.

This fixes a regression introduced by commit
018e044689

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
Tejun Heo
c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Tejun Heo
ab0fd1debe block: don't merge requests of different failfast settings
Block layer used to merge requests and bios with different failfast
settings.  This caused regular IOs to fail prematurely when they were
merged into failfast requests for readahead.

Niel Lambrechts could trigger the problem semi-reliably on ext4 when
resuming from STR.  ext4 uses readahead when reading inodes and
combined with the deterministic extra SATA PHY exception cycle during
resume on the specific configuration, non-readahead inode read would
fail causing ext4 errors.  Please read the following thread for
details.

  http://lkml.org/lkml/2009/5/23/21

This patch makes block layer reject merging if the failfast settings
don't match.  This is correct but likely to lower IO performance by
preventing regular IOs from mingling into surrounding readahead
requests.  Changes to allow such mixed merges and handle errors
correctly will be added later.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Niel Lambrechts <niel.lambrechts@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-03 21:06:45 +02:00
Shan Wei
b706f64281 cfq-iosched: remove redundant check for NULL cfqq in cfq_set_request()
With the changes for falling back to an oom_cfqq, we never fail
to find/allocate a queue in cfq_get_queue(). So remove the check.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 12:41:14 +02:00
NeilBrown
db64f680ba blocK: Restore barrier support for md and probably other virtual devices.
The next_ordered flag is only meaningful for devices that use __make_request.
So move the test against next_ordered out of generic code and in to
__make_request

Since this test was added, barriers have not worked on md or any
devices that don't use __make_request and so don't bother to set
next_ordered.  (dm explicitly sets something other than
QUEUE_ORDERED_NONE since
  commit 99360b4c18
but notes in the comments that it is otherwise meaningless).

Cc: Ken Milmore <ken.milmore@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:26 +02:00
Jens Axboe
018e044689 block: get rid of queue-private command filter
The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:26 +02:00
Martin K. Petersen
7878cba9f0 block: Create bip slabs with embedded integrity vectors
This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs.  Each bip slab
has an embedded bio_vec array at the end.  This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version.  Only the largest bip slab is backed by a mempool.  The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-01 10:56:25 +02:00
Jens Axboe
6118b70b3a cfq-iosched: get rid of the need for __GFP_NOFAIL in cfq_find_alloc_queue()
Setup an emergency fallback cfqq that we allocate at IO scheduler init
time. If the slab allocation fails in cfq_find_alloc_queue(), we'll just
punt IO to that cfqq instead. This ensures that cfq_find_alloc_queue()
never fails without having to ensure free memory.

On cfqq lookup, always try to allocate a new cfqq if the given cfq io
context has the oom_cfqq assigned. This ensures that we only temporarily
punt to this shared queue.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:25 +02:00
Jens Axboe
d5036d770f cfq-iosched: move cfqq initialization out of cfq_find_alloc_queue()
We're going to be needing that init code outside of that function
to get rid of the __GFP_NOFAIL in cfqq allocation.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-01 10:56:25 +02:00
Tejun Heo
245b2e70ea percpu: clean up percpu variable definitions
Percpu variable definition is about to be updated such that all percpu
symbols including the static ones must be unique.  Update percpu
variable definitions accordingly.

* as,cfq: rename ioc_count uniquely

* cpufreq: rename cpu_dbs_info uniquely

* xen: move nesting_count out of xen_evtchn_do_upcall() and rename it

* mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and
  rename it

* ipv4,6: rename cookie_scratch uniquely

* x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to
  pmc_irq_entry and nmi_entry to pmc_nmi_entry

* perf_counter: rename disable_count to perf_disable_count

* ftrace: rename test_event_disable to ftrace_test_event_disable

* kmemleak: rename test_pointer to kmemleak_test_pointer

* mce: rename next_interval to mce_next_interval

[ Impact: percpu usage cleanups, no duplicate static percpu var names ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
2009-06-24 15:13:48 +09:00
FUJITA Tomonori
1119865935 block: revert "bsg: setting rq->bio to NULL"
The SMP handler (sas_smp_request) was fixed to use the block API
properly, so we don't need this workaround to avoid blk_put_request()
warning.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:52:42 -05:00
Randy Dunlap
f740f5ca05 Fix kernel-doc parameter name typo in blk-settings.c:
Warning(block/blk-settings.c:108): No description found for parameter 'lim'
Warning(block/blk-settings.c:108): Excess function parameter 'limits' description in 'blk_set_default_limits'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-19 09:18:32 +02:00
Bartlomiej Zolnierkiewicz
90c699a9ee block: rename CONFIG_LBD to CONFIG_LBDAF
Follow-up to "block: enable by default support for large devices
and files on 32-bit archs".

Rename CONFIG_LBD to CONFIG_LBDAF to:
- allow update of existing [def]configs for "default y" change
- reflect that it is used also for large files support nowadays

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-19 08:08:50 +02:00
Martin K. Petersen
3a02c8e814 block: Fix bounce_pfn setting
Correct stacking bounce_pfn limit setting and prevent warnings on
32-bit.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-18 09:56:20 +02:00
Linus Torvalds
6fd03301d7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits)
  debugfs: use specified mode to possibly mark files read/write only
  debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
  xen: remove driver_data direct access of struct device from more drivers
  usb: gadget: at91_udc: remove driver_data direct access of struct device
  uml: remove driver_data direct access of struct device
  block/ps3: remove driver_data direct access of struct device
  s390: remove driver_data direct access of struct device
  parport: remove driver_data direct access of struct device
  parisc: remove driver_data direct access of struct device
  of_serial: remove driver_data direct access of struct device
  mips: remove driver_data direct access of struct device
  ipmi: remove driver_data direct access of struct device
  infiniband: ehca: remove driver_data direct access of struct device
  ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device
  hvcs: remove driver_data direct access of struct device
  xen block: remove driver_data direct access of struct device
  thermal: remove driver_data direct access of struct device
  scsi: remove driver_data direct access of struct device
  pcmcia: remove driver_data direct access of struct device
  PCIE: remove driver_data direct access of struct device
  ...

Manually fix up trivial conflicts due to different direct driver_data
direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
2009-06-16 12:57:37 -07:00
Li Zefan
e212d6f250 block: remove some includings of blktrace_api.h
When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 11:19:36 +02:00
Martin K. Petersen
e475bba2fd block: Introduce helper to reset queue limits to default values
DM reuses the request queue when swapping in a new device table
Introduce blk_set_default_limits() which can be used to reset the the
queue_limits prior to stacking devices.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:23:52 +02:00
Jeff Moyer
6923715ae3 cfq: remove extraneous '\n' in blktrace output
I noticed a blank line in blktrace output.  This patch fixes that.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:04 +02:00
Jens Axboe
0989a025d2 block: don't overwrite bdi->state after bdi_init() has been run
Move the defaults to where we do the init of the backing_dev_info.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:03 +02:00
Gui Jianfeng
81be834713 cfq: cleanup for last_end_request in cfq_data
Actually, last_end_request in cfq_data isn't used now. So lets
just remove it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 08:21:03 +02:00
Kay Sievers
2bdf914915 Driver Core: bsg: add nodename for bsg driver
This adds support to the BSG driver to report the proper device name to
userspace for the bsg devices.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Kay Sievers
b03f38b685 Driver Core: block: add nodename support for block drivers.
This adds support for block drivers to report their requested nodename
to userspace.  It also updates a number of block drivers to provide the
needed subdirectory and device name to be used for them.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:25 -07:00
Randy Dunlap
8ebf975608 block: fix kernel-doc in recent block/ changes
Fix kernel-doc warnings in recently changed block/ source code.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 20:14:23 -07:00
Linus Torvalds
c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Linus Torvalds
27951daa71 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (28 commits)
  ide-tape: fix debug call
  alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
  ide-dma: don't reset request fields on dma_timeout_retry()
  ide: drop rq->data handling from ide_map_sg()
  ide-atapi: kill unused fields and callbacks
  ide-tape: simplify read/write functions
  ide-tape: use byte size instead of sectors on rw issue functions
  ide-tape: unify r/w init paths
  ide-tape: kill idetape_bh
  ide-tape: use standard data transfer mechanism
  ide-tape: use single continuous buffer
  ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
  ide-tape,floppy: fix failed command completion after request sense
  ide-pm: don't abuse rq->data
  ide-cd,atapi: use bio for internal commands
  ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
  ide-cd: convert to using generic sense request
  ide: add helpers for preparing sense requests
  ide-cd: don't abuse rq->buffer
  ide-atapi: don't abuse rq->buffer
  ...
2009-06-11 10:00:03 -07:00
Kiyoshi Ueda
b0fd271d5f block: add request clone interface (v2)
This patch adds the following 2 interfaces for request-stacking drivers:

  - blk_rq_prep_clone(struct request *clone, struct request *orig,
		      struct bio_set *bs, gfp_t gfp_mask,
		      int (*bio_ctr)(struct bio *, struct bio*, void *),
		      void *data)
      * Clones bios in the original request to the clone request
        (bio_ctr is called for each cloned bios.)
      * Copies attributes of the original request to the clone request.
        The actual data parts (e.g. ->cmd, ->buffer, ->sense) are not
        copied.

  - blk_rq_unprep_clone(struct request *clone)
      * Frees cloned bios from the clone request.

Request stacking drivers (e.g. request-based dm) need to make a clone
request for a submitted request and dispatch it to other devices.

To allocate request for the clone, request stacking drivers may not
be able to use blk_get_request() because the allocation may be done
in an irq-disabled context.
So blk_rq_prep_clone() takes a request allocated by the caller
as an argument.

For each clone bio in the clone request, request stacking drivers
should be able to set up their own completion handler.
So blk_rq_prep_clone() takes a callback function which is called
for each clone bio, and a pointer for private data which is passed
to the callback.

NOTE:
blk_rq_prep_clone() doesn't copy any actual data of the original
request.  Pages are shared between original bios and cloned bios.
So caller must not complete the original request before the clone
request.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-11 13:11:05 +02:00
Linus Torvalds
8623661180 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
  Revert "x86, bts: reenable ptrace branch trace support"
  tracing: do not translate event helper macros in print format
  ftrace/documentation: fix typo in function grapher name
  tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
  tracing: add protection around module events unload
  tracing: add trace_seq_vprint interface
  tracing: fix the block trace points print size
  tracing/events: convert block trace points to TRACE_EVENT()
  ring-buffer: fix ret in rb_add_time_stamp
  ring-buffer: pass in lockdep class key for reader_lock
  tracing: add annotation to what type of stack trace is recorded
  tracing: fix multiple use of __print_flags and __print_symbolic
  tracing/events: fix output format of user stack
  tracing/events: fix output format of kernel stack
  tracing/trace_stack: fix the number of entries in the header
  ring-buffer: discard timestamps that are at the start of the buffer
  ring-buffer: try to discard unneeded timestamps
  ring-buffer: fix bug in ring_buffer_discard_commit
  ftrace: do not profile functions when disabled
  tracing: make trace pipe recognize latency format flag
  ...
2009-06-10 19:53:40 -07:00
Nikanth Karthikesan
d9c7d394a8 block: prevent possible io_context->refcount overflow
Currently io_context has an atomic_t(32-bit) as refcount.  In the case of
cfq, for each device against whcih a task does I/O, a reference to the
io_context would be taken.  And when there are multiple process sharing
io_contexts(CLONE_IO) would also have a reference to the same io_context.

Theoretically the possible maximum number of processes sharing the same
io_context + the number of disks/cfq_data referring to the same io_context
can overflow the 32-bit counter on a very high-end machine.

Even though it is an improbable case, let us make it atomic_long_t.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10 23:07:15 +02:00
Li Zefan
55782138e4 tracing/events: convert block trace points to TRACE_EVENT()
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 12:34:23 -04:00
FUJITA Tomonori
c1d4c41f2f bsg: setting rq->bio to NULL
Due to commit 1cd96c242a ("block: WARN
in __blk_put_request() for potential bio leak"), BSG SMP requests get
the false warnings:

WARNING: at block/blk-core.c:1068 __blk_put_request+0x52/0xc0()

This sets rq->bio to NULL to avoid that false warnings.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 15:17:37 +02:00
Martin K. Petersen
77634f33d4 block: Add missing bounce_pfn stacking and fix comments
DM no longer needs to set limits explicitly when calling blk_stack_limits.
Let the latter automatically deal with bounce_pfn scaling.

Fix kerneldoc variable names.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 06:23:22 +02:00
Jens Axboe
9df1bb9b51 Revert "block: Fix bounce limit setting in DM"
This reverts commit a05c0205ba.

DM doesn't need to access the bounce_pfn directly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 06:22:57 +02:00
FUJITA Tomonori
dbb66c4be0 block: needs to set the residual length of a bidi request
Tejun's "block: set rq->resid_len to blk_rq_bytes() on issue" patch
seems to be incomplete; It doesn't set rq->resid_len to blk_rq_bytes()
for a bidi request (req->next_rq). As a result, all bidi users are
broken.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09 05:47:10 +02:00
Martin K. Petersen
a05c0205ba block: Fix bounce limit setting in DM
blk_queue_bounce_limit() is more than a wrapper about the request queue
limits.bounce_pfn variable.  Introduce blk_queue_bounce_pfn() which can
be called by stacking drivers that wish to set the bounce limit
explicitly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-03 09:33:18 +02:00
Kiyoshi Ueda
53c663ce0f block: fix a possible oops on elv_abort_queue()
I found one more mis-conversion to the 'request is always dequeued
when completing' model in elv_abort_queue() during code inspection.
Although I haven't hit any problem caused by this mis-conversion yet
and just done compile/boot test, please apply if you have no problem.

Request must be dequeued when it completes.
However, elv_abort_queue() completes requests without dequeueing.
This will cause oops in the __blk_end_request_all().
This patch fixes the oops.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02 08:44:01 +02:00
James Bottomley
c143dc903d block: fix an oops on BLKPREP_KILL
Doing a bit of torture testing, I ran across a BUG in the block
subsystem (at blk-core.c:2048): the test for if the request is queued.

It turns out the trigger was a BLKPREP_KILL coming out of the SCSI prep
function.  Currently for BLKPREP_KILL requests, we send them straight
into __blk_end_request_all() with an error, but they've never been
dequeued, so they trip the bug.  Fix this by starting requests before
killing them.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-30 06:43:49 +02:00
Mike Snitzer
5d85d3247c block: export blk_stack_limits()
DM needs to use blk_stack_limits(), so it needs to be exported.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-28 11:04:53 +02:00
Kiyoshi Ueda
3c4198e874 block: fix no diskstat problem
The commit below in 2.6-block/for-2.6.31 causes no diskstat problem
because the blk_discard_rq() check was added with '&&'.
It should be 'blk_fs_request() || blk_discard_rq()'.
This patch does it and fixes the no diskstat problem.
Please review and apply.

------ /proc/diskstat without this patch -------------------------------------
   8       0 sda 0 0 0 0 0 0 0 0 0 0 0
------------------------------------------------------------------------------

----- /proc/diskstat with this patch applied ---------------------------------
   8       0 sda 4186 303 373621 61600 9578 3859 107468 169479 2 89755 231059
------------------------------------------------------------------------------

--------------------------------------------------------------------------
commit c69d48540c
Author: Jens Axboe <jens.axboe@oracle.com>
Date:   Fri Apr 24 08:12:19 2009 +0200

    block: include discard requests in IO accounting

    We currently don't do merging on discard requests, but we potentially
    could. If we do, then we need to include discard requests in the IO
    accounting, or merging would end up decrementing in_flight IO counters
    for an IO which never incremented them.

    So enable accounting for discard requests.

<snip>

 static inline int blk_do_io_stat(struct request *rq)
 {
-       return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq);
+       return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq) &&
+               blk_discard_rq(rq);
 }
--------------------------------------------------------------------------

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-27 14:50:02 +02:00
James Bottomley
ba396a6c10 block: fix oops with block tag queueing
commit e8939a50466fd963eb1ba9118c34b9ffb7ff6aa6
Author: Tejun Heo <tj@kernel.org>
Date:   Fri May 8 11:54:16 2009 +0900

    block: implement and enforce request peek/start/fetch

Added a BUG_ON(blk_queued_rq(req)) to the top of blk_finish_req().
Unfortunately, this checks whether req->queuelist is empty.  This list
is doing double duty both as the queue list and the tag list, so tagged
requests come in here with this not empty and boom (the tag list is
emptied by blk_queue_end_tag() lower down).

Fix this by moving the BUG_ON to below the end tag we also seem
vulnerable to this in blk_requeue_request() as well.  I think all uses
of blk_queued_rq() need auditing because the check is clearly wrong in
the tagged case.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-27 14:17:08 +02:00
Martin K. Petersen
c72758f337 block: Export I/O topology for block devices and partitions
To support devices with physical block sizes bigger than 512 bytes we
need to ensure proper alignment.  This patch adds support for exposing
I/O topology characteristics as devices are stacked.

  logical_block_size is the smallest unit the device can address.

  physical_block_size indicates the smallest I/O the device can write
  without incurring a read-modify-write penalty.

  The io_min parameter is the smallest preferred I/O size reported by
  the device.  In many cases this is the same as the physical block
  size.  However, the io_min parameter can be scaled up when stacking
  (RAID5 chunk size > physical block size).

  The io_opt characteristic indicates the optimal I/O size reported by
  the device.  This is usually the stripe width for arrays.

  The alignment_offset parameter indicates the number of bytes the start
  of the device/partition is offset from the device's natural alignment.
  Partition tools and MD/DM utilities can use this to pad their offsets
  so filesystems start on proper boundaries.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen
cd43e26f07 block: Expose stacked device queues in sysfs
Currently stacking devices do not have a queue directory in sysfs.
However, many of the I/O characteristics like sector size, maximum
request size, etc. are queue properties.

This patch enables the queue directory for MD/DM devices.  The elevator
code has been modified to deal with queues that do not have an I/O
scheduler.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen
025146e13b block: Move queue limits to an embedded struct
To accommodate stacking drivers that do not have an associated request
queue we're moving the limits to a separate, embedded structure.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen
ae03bf639a block: Use accessor functions for queue limits
Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Martin K. Petersen
e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Jens Axboe
e4b636366c Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/block/hd.c
	drivers/block/mg_disk.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:25:34 +02:00
Jens Axboe
0a7ae2ff0d block: change the tag sync vs async restriction logic
Make them fully share the tag space, but disallow async requests using
the last any two slots.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-20 08:54:31 +02:00
Jens Axboe
53674ac5a9 block: add warning to blk_make_request()
Add a note about how one needs to be careful when setting up these bio
chains.

Extracted from Boaz's updated patch.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 19:52:35 +02:00
Boaz Harrosh
a411f4bbb8 block: Un-export blk_rq_append_bio
OSD was the last in-tree user of blk_rq_append_bio(). Now
that it is fixed blk_rq_append_bio is un-exported and
is only used internally by block layer.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 12:14:56 +02:00
Boaz Harrosh
79eb63e9e5 block: Add blk_make_request(), takes bio, returns a request
New block API:
given a struct bio allocates a new request. This is the parallel of
generic_make_request for BLOCK_PC commands users.

The passed bio may be a chained-bio. The bio is bounced if needed
inside the call to this member.

This is in the effort of un-exporting blk_rq_append_bio().

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 12:14:56 +02:00
James Bottomley
3a5a39276d block: allow blk_rq_map_kern to append to requests
Use blk_rq_append_bio() internally instead of blk_rq_bio_prep()
so blk_rq_map_kern can be called multiple times, to map multiple
buffers.

This is in the effort to un-export blk_rq_append_bio()

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 12:14:55 +02:00
Tejun Heo
5f49f63178 block: set rq->resid_len to blk_rq_bytes() on issue
In commit c3a4d78c58, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero.  The conversion was done under the assumption that
when a request fails residue count wasn't defined.  However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.

This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers.  While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.

* ide-cd: rq->resid_len cleared on pc success

* mptsas: req->resid_len cleared on success

* sas_expander: rsp/req->resid_len cleared on success

* mpt2sas_transport: req->resid_len cleared on success

* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
  advantage of initial full count to simplify code

Boaz Harrosh spotted bug in resid_len initialization.  Fixed as
suggested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 11:36:08 +02:00
Ingo Molnar
1079cac0f4 Merge commit 'v2.6.30-rc6' into tracing/core
Merge reason: we were on an -rc4 base, sync up to -rc6

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 10:15:35 +02:00
Kazuhisa Ichikawa
af498d7fa3 block: fix the bio_vec array index out-of-bounds test
Current bio_vec array index out-of-bounds test within
__end_that_request_first() does not seem correct.
It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code
uses idx (which is, bio->bi_idx + next_idx) as the array index into
bio_vec array. This means that the test really make sense only at
the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx
== zero). Fix this by replacing bio->bi_idx with idx.
(This patch applies to 2.6.30-rc4.)

Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-12 13:27:45 +02:00
FUJITA Tomonori
b1f744937f block: move completion related functions back to blk-core.c
Let's put the completion related functions back to block/blk-core.c
where they have lived. We can also unexport blk_end_bidi_request() and
__blk_end_bidi_request(), which nobody uses.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 11:06:48 +02:00
Tejun Heo
9934c8c045 block: implement and enforce request peek/start/fetch
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:18 +02:00
Tejun Heo
a2dec7b363 block: hide request sector and data_len
Block low level drivers for some reason have been pretty good at
abusing block layer API.  Especially struct request's fields tend to
get violated in all possible ways.  Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.

This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.

[ Impact: hide internal fields, block API change ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:55 +02:00
Tejun Heo
2e46e8b27a block: drop request->hard_* and *nr_sectors
struct request has had a few different ways to represent some
properties of a request.  ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers.  The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion.  In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.

Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size.  This is more convoluted than the hard_ case.

rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests.  rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests.  This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.

rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front.  This is mainly used by drivers
which transfers data by walking request segment-by-segment.  This
value always equals rq->bio->bi_size >> 9.  However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.

In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs.  With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly.  Drop all the duplicates.  Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length.  Everything else is
defined in terms of these three and available only through accessors.

* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
  now handles pc and fs requests equally other than rq->sector update.
  This means that now pc requests can use partial completion too (no
  in-kernel user yet tho).

* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
  now uses byte count as the primary data length.

* blk_rq_pos() is now guranteed to be always correct.  In-block users
  converted.

* blk_rq_bytes() is now guaranteed to be always valid as is
  blk_rq_sectors().  In-block users converted.

* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
  More convenient one is used.

* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
  pointer to request.

[ Impact: API cleanup, single way to represent one property of a request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Tejun Heo
83096ebf12 block: convert to pos and nr_sectors accessors
With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Tejun Heo
5b93629b45 block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.

This is in preparation of request data length handling cleanup.

Geert	: suggested adding const to struct request * parameter to accessors
Sergei	: spotted error in patch description

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Tejun Heo
c3a4d78c58 block: add rq->resid_len
rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion.  This duality creates some
headaches.

First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing.  It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count.  This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.

Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred.  The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all.  This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.

This patch adds rq->resid_len which is used only for residual count.

While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.

Boaz	: spotted missing conversion in osd
Sergei	: spotted too early conversion to blk_rq_bytes() in ide-tape

[ Impact: cleanup residual count handling, report 0 resid by default ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:53 +02:00
Ingo Molnar
44347d947f Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07 11:17:34 +02:00
Alan D. Brunelle
22a7c31a96 blktrace: from-sector redundant in trace_block_remap
Remove redundant from-sector parameter: it's /always/ the bio's sector
passed in.

[ Impact: cleanup ]

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF517C.7000503@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 14:13:01 +02:00
Tejun Heo
4c94dece1b block: don't init rq fields unnecessarily
blk_get_request() always returns properly zeroed requests.  Don't set
fields to zero/NULL unnecessarily.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 08:14:50 +02:00
Nikanth Karthikesan
9eb55b030c block: catch trying to use more bits than request->cmd_flags has
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 07:37:37 +02:00
Jens Axboe
c69d48540c block: include discard requests in IO accounting
We currently don't do merging on discard requests, but we potentially
could. If we do, then we need to include discard requests in the IO
accounting, or merging would end up decrementing in_flight IO counters
for an IO which never incremented them.

So enable accounting for discard requests.

Problem found by Nikanth Karthikesan <knikanth@suse.de>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 07:37:37 +02:00
Jens Axboe
c2553b5844 block: make blk_do_io_stat() do the full "is this rq accountable" checks
We currently check for file system requests outside of blk_do_io_stat(rq),
but we may as well just include it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 07:37:37 +02:00
Tejun Heo
731ec497e5 block: kill rq->data
Now that all block request data transfer is done via bio, rq->data
isn't used.  Kill it.

While at it, make the roles of rq->special and buffer clear.

[ Impact: drop now unncessary field from struct request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
2009-04-28 07:37:36 +02:00
Tejun Heo
40cbbb781d block: implement and use [__]blk_end_request_all()
There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion.  Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.

This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request.  BUG_ON() is added to to ensure that
this actually happens.

Most conversions are simple but there are a few noteworthy ones.

* cdrom/viocd: viocd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/block/dasd: dasd_end_request() replaced with direct calls to
  __blk_end_request_all().

* s390/char/tape_block: tapeblock_end_request() replaced with direct
  calls to blk_end_request_all().

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-28 07:37:35 +02:00
Tejun Heo
b243ddcbe9 block: move rq->start_time initialization to blk_rq_init()
rq->start_time was initialized in init_request_from_bio() so special
requests didn't have start_time set.  This has been okay as start_time
has been used only for fs requests; however, there is no indication of
this actually is the case or not.  Set rq->start_time in blk_rq_init()
and guarantee that all initialized rq's have its start_time set.  This
improves consistency at virtually no cost and future changes will make
use of the timestamp for !bio requests.

[ Impact: rq->start_time is valid for all requests ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:35 +02:00
Tejun Heo
2e60e02297 block: clean up request completion API
Request completion has gone through several changes and became a bit
messy over the time.  Clean it up.

1. end_that_request_data() is a thin wrapper around
   end_that_request_data_first() which checks whether bio is NULL
   before doing anything and handles bidi completion.
   blk_update_request() is a thin wrapper around
   end_that_request_data() which clears nr_sectors on the last
   iteration but doesn't use the bidi completion.

   Clean it up by moving the initial bio NULL check and nr_sectors
   clearing on the last iteration into end_that_request_data() and
   renaming it to blk_update_request(), which makes blk_end_io() the
   only user of end_that_request_data().  Collapse
   end_that_request_data() into blk_end_io().

2. There are four visible completion variants - blk_end_request(),
   __blk_end_request(), blk_end_bidi_request() and end_request().
   blk_end_request() and blk_end_bidi_request() uses blk_end_request()
   as the backend but __blk_end_request() and end_request() use
   separate implementation in __blk_end_request() due to different
   locking rules.

   blk_end_bidi_request() is identical to blk_end_io().  Collapse
   blk_end_io() into blk_end_bidi_request(), separate out request
   update into internal helper blk_update_bidi_request() and add
   __blk_end_bidi_request().  Redefine [__]blk_end_request() as thin
   inline wrappers around [__]blk_end_bidi_request().

3. As the whole request issue/completion usages are about to be
   modified and audited, it's a good chance to convert completion
   functions return bool which better indicates the intended meaning
   of return values.

4. The function name end_that_request_last() is from the days when it
   was a public interface and slighly confusing.  Give it a proper
   internal name - blk_finish_request().

5. Add description explaning that blk_end_bidi_request() can be safely
   used for uni requests as suggested by Boaz Harrosh.

The only visible behavior change is from #1.  nr_sectors counts are
cleared after the final iteration no matter which function is used to
complete the request.  I couldn't find any place where the code
assumes those nr_sectors counters contain the values for the last
segment and this change is good as it makes the API much more
consistent as the end result is now same whether a request is
completed using [__]blk_end_request() alone or in combination with
blk_update_request().

API further cleaned up per Christoph's suggestion.

[ Impact: cleanup, rq->*nr_sectors always updated after req completion ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
2009-04-28 07:37:35 +02:00
Tejun Heo
0b302d5aa7 block: kill blk_end_request_callback()
With recent IDE updates, blk_end_request_callback() doesn't have any
user now.  Kill it.

[ Impact: removal of unused convoluted interface ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:34 +02:00
Tejun Heo
158dbda006 block: reorganize request fetching functions
Impact: code reorganization

elv_next_request() and elv_dequeue_request() are public block layer
interface than actual elevator implementation.  They mostly deal with
how requests interact with block layer and low level drivers at the
beginning of rqeuest processing whereas __elv_next_request() is the
actual eleveator request fetching interface.

Move the two functions to blk-core.c.  This prepares for further
interface cleanup.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:34 +02:00
Tejun Heo
5efccd17ce block: reorder request completion functions
Reorder request completion functions such that

* All request completion functions are located together.

* Functions which are used by only one caller is put right above the
  caller.

* end_request() is put after other completion functions but before
  blk_update_request().

This change is for completion function cleanup which will follow.

[ Impact: cleanup, code reorganization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:34 +02:00
Tejun Heo
2eef33e439 block: clean up misc stuff after block layer timeout conversion
* In blk_rq_timed_out_timer(), else { if } to else if

* In blk_add_timer(), simplify if/else block

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:34 +02:00
Tejun Heo
10732f5661 block: cleanup REQ_SOFTBARRIER usages
blk_insert_request() doesn't need to worry about REQ_SOFTBARRIER.
Don't set it.  Combined with recent ide updates, REQ_SOFTBARRIER is
now only used in elevator proper and for discard requests.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:34 +02:00
Tejun Heo
e4025f6c21 block: don't set REQ_NOMERGE unnecessarily
RQ_NOMERGE_FLAGS already clears defines which REQ flags aren't
mergeable.  There is no reason to specify it superflously.  It only
adds to confusion.  Don't set REQ_NOMERGE for barriers and requests
with specific queueing directive.  REQ_NOMERGE is now exclusively used
by the merging code.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:33 +02:00
Tejun Heo
a7f5579234 block: kill blk_start_queueing()
blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion.  None of the current users depends on
blk_start_queueing() running request_fn directly.  Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.

[ Impact: removal of mostly duplicate interface function ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:33 +02:00
Tejun Heo
a538cd03be block: merge blk_invoke_request_fn() into __blk_run_queue()
__blk_run_queue wraps blk_invoke_request_fn() such that it
additionally removes plug and bails out early if the queue is empty.
Both extra operations have their own pending mechanisms and don't
cause any harm correctness-wise when they are done superflously.

The only user of blk_invoke_request_fn() being blk_start_queue(),
there isn't much reason to keep both functions around.  Merge
blk_invoke_request_fn() into __blk_run_queue() and make
blk_start_queue() use __blk_run_queue() instead.

[ Impact: merge two subtly different internal functions ]

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:33 +02:00
Bartlomiej Zolnierkiewicz
db29a6b496 block: enable by default support for large devices and files on 32-bit archs
Enable by default support for large devices and files (CONFIG_LBD):

- With 1TB disks being a commodity hardware it is quite easy to hit 2TB
  limitation while building RAIDs etc. and many distros have been using
  CONFIG_LBD=y by default already (at least Fedora 10 and openSUSE 11.1).

- This should also prevent a subtle ext4 filesystem compatibility issue:
  mke2fs.ext4 defaults to creating filesystems with huge_files feature
  enabled and such filesystems cannot be later mounted read-write on
  machines with CONFIG_LBD=n (it should be quite easy to hit this issue
  when trying to use filesystem created using distro kernel on system
  running the self-build kernel, think about USB disk enclosures & co.).

While at it:

- Clarify config option help text w.r.t. mounting ext4 filesystems
  (they can be mounted with CONFIG_LBD=n but in the read-only mode).

Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 07:37:33 +02:00
Tejun Heo
924cec7789 block: clear req->errors on bio completion only for fs requests
Impact: subtle behavior change

For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much.  This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.

For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.

The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path.  However, future changes will
unify data accesses to bio and all non fs users care about rq error
status.  Clear rq->errors on bio completion only for fs requests.

In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers.  Unifying / cleaning up rq->errors usage and letting llds
manage it would be better.  TODO comment added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
2009-04-28 07:37:28 +02:00
Jens Axboe
f2d1f0ae78 cfq-iosched: cache prio_tree root in cfqq->p_root
Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.

Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Jens Axboe
3ac6c9f8a6 cfq-iosched: fix bug with aliased request and cooperation detection
cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.

cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Jens Axboe
26a2ac009c cfq-iosched: clear ->prio_trees[] on cfqd alloc
Not strictly needed, but we should make it clear that we init the
rbtree roots here.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:22 +02:00
Hannes Reinecke
17d5c8ca75 block: fix intermittent dm timeout based oops
Very rarely under stress testing of dm, oopses are occuring as
something tampers with an old stack frame.  This has been traced back
to blk_abort_queue() leaving a timeout_list pointing to the stack.
The reason is that sometimes blk_abort_request() won't delete the
timer (if the request is marked as complete but before the timer has
been removed, a small race window).  Fix this by splicing back from
the ususally empty list to the q->timeout_list.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:21 +02:00
Jerome Marchand
42dad7647a block: simplify I/O stat accounting
This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.

Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-24 08:54:21 +02:00
Jeff Moyer
04dc6e71a2 cfq-iosched: use the default seek distance when there aren't enough seek samples
If the cfq io context doesn't have enough samples yet to provide a mean
seek distance, then use the default threshold we have for seeky IO instead
of defaulting to 0.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:11 +02:00
Jeff Moyer
4d00aa47e2 cfq-iosched: make seek_mean converge more quickly
Right now, depending on the first sector to which a process issues I/O,
the seek time may start out way out of whack. So make sure we start
with 0 sectors in seek, instead of the offset of the first request
issued.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:11 +02:00
Jens Axboe
b759113499 block: make blk_abort_queue() ignore non-request based devices
There's nothing to do for those devices, since the timeout handling is
based on requests.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:10 +02:00
Tejun Heo
71982a409f block: include empty disks in /proc/diskstats
/proc/diskstats used to show stats for all disks whether they're
zero-sized or not and their non-zero partitions.  Commit
074a7aca7a accidentally changed the
behavior such that it doesn't print out zero sized disks.  This patch
implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and
uses it in diskstats_show() such that empty part0 is shown in
/proc/diskstats.

Reported and bisectd by Dianel Collins.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Collins <solemnwarning@solemnwarning.no-ip.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:10 +02:00
Tejun Heo
cd0aca2d55 block: fix queue bounce limit setting
Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily

All DMA address limits are expressed in terms of the last addressable
unit (byte or page) instead of one plus that.  However, when
determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(),
it compares the specified limit against 0x100000000UL to determine
whether it's below 4G ending up falsely setting GFP_DMA in
q->bounce_gfp.

As DMA zone is very small on x86_64, this makes larger SG_IO transfers
very eager to trigger OOM killer.  Fix it.  While at it, rename the
parameter to @dma_mask for clarity and convert comment to proper
winged style.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:09 +02:00
Tejun Heo
25636e282f block: fix SG_IO vector request data length handling
Impact: fix SG_IO behavior such that it matches the documentation

SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the
shorter one wins.  However, the current implementation returns -EINVAL
for such cases.  Trim iovc if it's longer than ->dxfer_len.

This patch uses iov_*() helpers which take struct iovec * by casting
struct sg_iovec * to it.  sg_iovec is always identical to iovec and
this will be further cleaned up with later patches.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-22 08:35:09 +02:00
Tejun Heo
6f41469c62 block: clear req->errors on bio completion only for fs requests
Impact: subtle behavior change

For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much.  This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.

For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.

The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path.  However, future changes will
unify data accesses to bio and all non fs users care about rq error
status.  Clear rq->errors on bio completion only for fs requests.

In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers.  Unifying / cleaning up rq->errors usage and letting llds
manage it would be better.  TODO comment added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
2009-04-19 07:00:41 +09:00
Li Zefan
1d54ad6da9 blktrace: add trace/ to /sys/block/sda
Impact: allow ftrace-plugin blktrace to trace device-mapper devices

To trace a single partition:
  # echo 1 > /sys/block/sda/sda1/enable

To trace the whole sda instead:
  # echo 1 > /sys/block/sda/enable

Thus we also fix an issue reported by Ted, that ftrace-plugin blktrace
can't be used to trace device-mapper devices.

Now:

  # echo 1 > /sys/block/dm-0/trace/enable
  echo: write error: No such device or address
  # mount -t ext4 /dev/dm-0 /mnt
  # echo 1 > /sys/block/dm-0/trace/enable
  # echo blk > /debug/tracing/current_tracer

Reported-by: Theodore Tso <tytso@mit.edu>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Shawn Du <duyuyang@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49E42665.6020506@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-16 10:10:59 +02:00
Shawn Du
d0deef5b14 blktrace: support per-partition tracing
Though one can specify '-d /dev/sda1' when using blktrace, it still
traces the whole sda.

To support per-partition tracing, when we start tracing, we initialize
bt->start_lba and bt->end_lba to the start and end sector of that
partition.

Note some actions are per device, thus we don't filter 0-sector events.

The original patch and discussion can be found here:
	http://marc.info/?l=linux-btrace&m=122949374214540&w=2

Signed-off-by: Shawn Du <duyuyang@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49E42620.4050701@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-16 10:10:57 +02:00
Jens Axboe
a36e71f996 cfq-iosched: add close cooperator code
If we have processes that are working in close proximity to each
other on disk, we don't want to idle wait. Instead allow the close
process to issue a request, getting better aggregate bandwidth.
The anticipatory scheduler has similar checks, noop and deadline do
not need it since they don't care about process <-> io mappings.

The code for CFQ is a little more involved though, since we split
request queues into per-process contexts.

This fixes a performance problem with eg dump(8), since it uses
several processes in some silly attempt to speed IO up. Even if
dump(8) isn't really a valid case (it should be fixed by using
CLONE_IO), there are other cases where we see close processes
and where idling ends up hurting performance.

Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the
initial implementation.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:15:11 +02:00
Jens Axboe
9481ffdc61 cfq-iosched: log responsible 'cfqq' in idle timer arm
Makes it easier to read the traces.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:14:13 +02:00
Jens Axboe
2d87072296 cfq-iosched: tweak kick logic a bit more
We only kick the dispatch for an idling queue, if we think it's a
(somewhat) fully merged request. Also allow a kick if we have other
busy queues in the system, since we don't want to risk waiting for
a potential merge in that case. It's better to get some work done and
proceed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:12:46 +02:00
Jens Axboe
40bb54d197 cfq-iosched: no need to save interrupts in cfq_kick_queue()
It's called from the workqueue handlers from process context, so
we always have irqs enabled when entered.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:11:10 +02:00
Nikanth Karthikesan
15afd1cc7b block: Remove code handling bio_alloc failure with __GFP_WAIT
Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_KERNEL implies __GFP_WAIT.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:12 +02:00
FUJITA Tomonori
91e463c8f5 block: fix SG_IO to return a proper error value
blk_rq_unmap_user() returns -EFAULT if a program passes an invalid
address to kernel. SG_IO path needs to pass the returned value to user
space instead of ignoring it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:11 +02:00
Jens Axboe
d6ceb25e8d cfq-iosched: don't delay queue kick for a merged request
"Zhang, Yanmin" <yanmin_zhang@linux.intel.com> reports that commit
b029195dda introduced a regression
of about 50% with sequential threaded read workloads. The test
case is:

tiotest -k0 -k1 -k3 -f 80 -t 32

which starts 32 threads each reading a 80MB file. Twiddle the kick
queue logic so that we do start IO immediately, if it appears to be
a fully merged request. We can't really detect that, so just check
if the request is bigger than a page or not. The assumption is that
since single bio issues will first queue a single request with just
one page attached and then later do merges on that, if we already
have more than a page worth of data in the request, then the request
is most likely good to go.

Verified that this doesn't cause a regression with the test case that
commit b029195dda was fixing. It does not,
we still see maximum sized requests for the queue-then-merge cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:12 +02:00
Jens Axboe
1d6bfbdf38 as-iosched: get rid of private REQ_SYNC/REQ_ASYNC defines
We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe
ff6657c6c8 cfq-iosched: get rid of private SYNC/ASYNC defines
We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe
b0b78f81a5 cfq-iosched: use rw_is_sync() to see if rw flags are sync or not
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe
f600abe2de block: fix bad spelling of quiesce
Credit goes to Andrew Morton for spotting this one.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:09 +02:00
Linus Torvalds
c93f216b5b Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y
  branch tracer: Fix for enabling branch profiling makes sparse unusable
  ftrace: Correct a text align for event format output
  Update /debug/tracing/README
  tracing/ftrace: alloc the started cpumask for the trace file
  tracing, x86: remove duplicated #include
  ftrace: Add check of sched_stopped for probe_sched_wakeup
  function-graph: add proper initialization for init task
  tracing/ftrace: fix missing include string.h
  tracing: fix incorrect return type of ns2usecs()
  tracing: remove CALLER_ADDR2 from wakeup tracer
  blktrace: fix pdu_len when tracing packet command requests
  blktrace: small cleanup in blk_msg_write()
  blktrace: NUL-terminate user space messages
  tracing: move scripts/trace/power.pl to scripts/tracing/power.pl
2009-04-07 14:10:10 -07:00
Linus Torvalds
6a5d263866 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  loop: mutex already unlocked in loop_clr_fd()
  cfq-iosched: don't let idling interfere with plugging
  block: remove unused REQ_UNPLUG
  cfq-iosched: kill two unused cfqq flags
  cfq-iosched: change dispatch logic to deal with single requests at the time
  mflash: initial support
  cciss: change to discover first memory BAR
  cciss: kernel scan thread for MSA2012
  cciss: fix residual count for block pc requests
  block: fix inconsistency in I/O stat accounting code
  block: elevator quiescing helpers
2009-04-07 11:06:41 -07:00
Linus Torvalds
132ea5e9aa Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_mv: shorten register names
  sata_mv: workaround errata SATA#13
  sata_mv: cosmetic renames
  sata_mv: workaround errata SATA#26
  sata_mv: workaround errata PCI#7
  sata_mv: replace 0x1f with ATA_PIO4 (v2)
  sata_mv: fix irq mask races
  sata_mv: revert SoC irq breakage
  libata: ahci enclosure management bios workaround
  ata: Add TRIM infrastructure
  ata_piix: VGN-BX297XP wants the controller power up on suspend
  libata: Remove some redundant casts from pata_octeon_cf.c
  pata_artop: typo
2009-04-07 08:53:02 -07:00
Jens Axboe
b029195dda cfq-iosched: don't let idling interfere with plugging
When CFQ is waiting for a new request from a process, currently it'll
immediately restart queuing when it sees such a request. This doesn't
work very well with streamed IO, since we then end up splitting IO
that would otherwise have been merged nicely. For a simple dd test,
this causes 10x as many requests to be issued as we should have.
Normally this goes unnoticed due to the low overhead of requests
at the device side, but some hardware is very sensitive to request
sizes and there it can cause big slow downs.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 11:38:31 +02:00
Jens Axboe
2385327725 block: remove unused REQ_UNPLUG
The request inherits the unplug flag from the bio, but it isn't actually
used. The bio flag stops at __make_request(), which tells it to unplug
after submission. Passing it on to the request doesn't make any sense.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:59:11 +02:00
Jens Axboe
75e50984f0 cfq-iosched: kill two unused cfqq flags
We only manipulate the must_dispatch and queue_new flags, they are not
tested anymore. So get rid of them.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:56:14 +02:00
Jens Axboe
2f5cb7381b cfq-iosched: change dispatch logic to deal with single requests at the time
The IO scheduler core calls into the IO scheduler dispatch_request hook
to move requests from the IO scheduler and into the driver dispatch
list. It only does so when the dispatch list is empty. CFQ moves several
requests to the dispatch list, which can cause higher latencies if we
suddenly have to switch to some important sync IO. Change the logic to
move one request at the time instead.

This should almost be functionally equivalent to what we did before,
except that we now honor 'quantum' as the maximum queue depth at the
device side from any single cfqq. If there's just a single active
cfqq, we allow up to 4 times the normal quantum.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:51:19 +02:00
Jerome Marchand
26308eab69 block: fix inconsistency in I/O stat accounting code
This forces in_flight to be zero when turning off or on the I/O stat
accounting and stops updating I/O stats in attempt_merge() when
accounting is turned off.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:12:38 +02:00
Jens Axboe
6c7e8cee6a block: elevator quiescing helpers
Simple helper functions to quiesce the request queue. These are
currently only used for switching IO schedulers on-the-fly, but
we can use them to properly switch IO accounting on and off as well.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:12:37 +02:00
Alan Cox
8feb4d20b4 pata_artop: typo
Fix a typo (this was in the original patch but was not merged when the code
fixes were for some reason)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-06 20:00:29 -04:00
Jens Axboe
aeb6fafb8f block: Add flag for telling the IO schedulers NOT to anticipate more IO
By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.

Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe
644b2d99b7 block: enabling plugging on SSD devices that don't do queuing
For the older SSD devices that don't do command queuing, we do want to
enable plugging to get better merging.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe
1faa16d228 block: change the request allocation/congestion logic to be sync/async based
This makes sure that we never wait on async IO for sync requests, instead
of doing the split on writes vs reads.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:53 -07:00
Linus Torvalds
714f83d5d9 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
  tracing, net: fix net tree and tracing tree merge interaction
  tracing, powerpc: fix powerpc tree and tracing tree interaction
  ring-buffer: do not remove reader page from list on ring buffer free
  function-graph: allow unregistering twice
  trace: make argument 'mem' of trace_seq_putmem() const
  tracing: add missing 'extern' keywords to trace_output.h
  tracing: provide trace_seq_reserve()
  blktrace: print out BLK_TN_MESSAGE properly
  blktrace: extract duplidate code
  blktrace: fix memory leak when freeing struct blk_io_trace
  blktrace: fix blk_probes_ref chaos
  blktrace: make classic output more classic
  blktrace: fix off-by-one bug
  blktrace: fix the original blktrace
  blktrace: fix a race when creating blk_tree_root in debugfs
  blktrace: fix timestamp in binary output
  tracing, Text Edit Lock: cleanup
  tracing: filter fix for TRACE_EVENT_FORMAT events
  ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
  x86: kretprobe-booster interrupt emulation code fix
  ...

Fix up trivial conflicts in
 arch/parisc/include/asm/ftrace.h
 include/linux/memory.h
 kernel/extable.c
 kernel/module.c
2009-04-05 11:04:19 -07:00
Linus Torvalds
90975ef712 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...
2009-04-05 10:33:07 -07:00
Linus Torvalds
b1dbb67911 Merge branch 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  s390: remove arch specific smp_send_stop()
  panic: clean up kernel/panic.c
  panic, smp: provide smp_send_stop() wrapper on UP too
  panic: decrease oops_in_progress only after having done the panic
  generic-ipi: eliminate WARN_ON()s during oops/panic
  generic-ipi: cleanups
  generic-ipi: remove CSD_FLAG_WAIT
  generic-ipi: remove kmalloc()
  generic IPI: simplify barriers and locking
2009-04-03 17:33:30 -07:00
Li Zefan
e2494e1b42 blktrace: fix pdu_len when tracing packet command requests
Impact: output all of packet commands - not just the first 4 / 8 bytes

Since commit d7e3c3249e ("block: add
large command support"), struct request->cmd has been changed from
unsinged char cmd[BLK_MAX_CDB] to unsigned char *cmd.

v1 -> v2: by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

- make sure rq->cmd_len is always intialized, and then we can use
  rq->cmd_len instead of BLK_MAX_CDB.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49D4507E.2060602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-03 15:29:26 +02:00
Ingo Molnar
8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Ingo Molnar
65fb0d23fc Merge branch 'linus' into cpumask-for-linus
Conflicts:
	arch/x86/kernel/cpu/common.c
2009-03-30 23:53:32 +02:00
Linus Torvalds
7c730ccdc1 Merge branch 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits)
  percpu: fix spurious alignment WARN in legacy SMP percpu allocator
  percpu: generalize embedding first chunk setup helper
  percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()
  percpu: make x86 addr <-> pcpu ptr conversion macros generic
  linker script: define __per_cpu_load on all SMP capable archs
  x86: UV: remove uv_flush_tlb_others() WARN_ON
  percpu: finer grained locking to break deadlock and allow atomic free
  percpu: move fully free chunk reclamation into a work
  percpu: move chunk area map extension out of area allocation
  percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free()
  x86, percpu: setup reserved percpu area for x86_64
  percpu, module: implement reserved allocation and use it for module percpu variables
  percpu: add an indirection ptr for chunk page map access
  x86: make embedding percpu allocator return excessive free space
  percpu: use negative for auto for pcpu_setup_first_chunk() arguments
  percpu: improve first chunk initial area map handling
  percpu: cosmetic renames in pcpu_setup_first_chunk()
  percpu: clean up percpu constants
  x86: un-__init fill_pud/pmd/pte
  x86: remove vestigial fix_ioremap prototypes
  ...

Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
2009-03-28 13:48:38 -07:00
Linus Torvalds
d54b3538b0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits)
  [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition
  [SCSI] mpt2sas: make global symbols unique
  [SCSI] sd: Make revalidate less chatty
  [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices
  [SCSI] sd: Refactor sd_read_capacity()
  [SCSI] mpt2sas v00.100.11.15
  [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h
  [SCSI] ch: Add scsi type modalias
  [SCSI] 3w-9xxx: add power management support
  [SCSI] bsg: add linux/types.h include to bsg.h
  [SCSI] cxgb3i: fix function descriptions
  [SCSI] libiscsi: fix possbile null ptr session command cleanup
  [SCSI] iscsi class: remove host no argument from session creation callout
  [SCSI] libiscsi: pass session failure a session struct
  [SCSI] iscsi lib: remove qdepth param from iscsi host allocation
  [SCSI] iscsi lib: have lib create work queue for transmitting IO
  [SCSI] iscsi class: fix lock dep warning on logout
  [SCSI] libiscsi: don't cap queue depth in iscsi modules
  [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging
  [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging
  ...
2009-03-28 13:30:43 -07:00
Ingo Molnar
6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Boaz Harrosh
e7cbbf1bf1 bsg: Remove bogus check against request_queue->max_sectors
bsg submits REQ_TYPE_BLOCK_PC so the right check is max_hw_sectors.
But I've removed this check because right after, bsg proceeds with
calling blk_rq_map_user() which does all the right checks.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-26 11:01:25 +01:00
Boaz Harrosh
1cd96c242a block: WARN in __blk_put_request() for potential bio leak
Put a WARN_ON in __blk_put_request if it is about to
leak bio(s). This is a serious bug that can happen in error
handling code paths.

For this to work I have fixed a couple of places in block/ where
request->bio != NULL ownership was not honored. And a small cleanup
at sg_io() while at it.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-26 11:01:23 +01:00
Boaz Harrosh
05378940ca bsg: add support for tail queuing
Currently inherited from sg.c bsg will submit asynchronous request
 at the head-of-the-queue, (using "at_head" set in the call to
 blk_execute_rq_nowait()). This is bad in situation where the queues
 are full, requests will execute out of order, and can cause
 starvation of the first submitted requests.

The sg_io_v4->flags member is used and a bit is allocated to denote the
Q_AT_TAIL. Zero is to queue at_head as before, to be compatible with old
code at the write/read path. SG_IO code path behavior was changed so to
be the same as write/read behavior. SG_IO was very rarely used and breaking
compatibility with it is OK at this stage.

sg_io_hdr at sg.h also has a flags member and uses 3 bits from the first
nibble and one bit from the last nibble. Even though none of these bits
are supported by bsg, The second nibble is allocated for use by bsg. Just
in case.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24 12:35:17 +01:00
Jens Axboe
50e1749310 block: get rid of unused blkdev_free_rq() define
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24 12:35:16 +01:00
Jens Axboe
f3b144aa7f block: remove various blk_queue_*() setting functions in blk_init_queue_node()
It calls blk_queue_make_request(), which sets the identical set of limits.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24 12:35:16 +01:00
Ingo Molnar
cd80a8142e Merge branch 'x86/core' into core/ipi 2009-03-13 11:05:58 +01:00
Rusty Russell
c69fc56de1 cpumask: use topology_core_cpumask/topology_thread_cpumask instead of cpu_core_map/cpu_sibling_map
Impact: cleanup

This is presumably what those definitions are for, and while all archs
define cpu_core_map/cpu_sibling map, that's changing (eg. x86 wants to
change it to a pointer).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:46 +10:30
Ingo Molnar
25d500067d Merge branch 'linus' into core/ipi 2009-03-13 02:14:25 +01:00
James Bottomley
f290f1970f [SCSI] Make scsi.h independent of the rest of the scsi includes
This allows it to compile and be used on the ps3 platform that wants
to use the #define values in scsi.h without actually having
CONFIG_SCSI set.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:13 -05:00
Ingo Molnar
12e87e36e0 Merge branches 'tracing/doc', 'tracing/ftrace', 'tracing/printk' and 'linus' into tracing/core 2009-03-10 09:56:25 +01:00
Ingo Molnar
467c88fee5 Merge branches 'x86/apic', 'x86/asm', 'x86/fixmap', 'x86/memtest', 'x86/mm', 'x86/urgent', 'linus' and 'core/percpu' into x86/core 2009-03-10 09:26:38 +01:00
Jens Axboe
59247eaea5 block: fix missing bio back/front segment size setting in blk_recount_segments()
Commit 1e42807918 introduced a bug where we
don't get front/back segment sizes in the bio in blk_recount_segments().
Fix this by tracking the back bio as well as the front bio in
__blk_recalc_rq_segments(), this also cleans up the interface by getting
rid of the segment size pointer passing.

Tested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-06 08:55:24 +01:00
Ingo Molnar
91d75e209b Merge branch 'x86/core' into core/percpu 2009-03-04 02:29:19 +01:00
Ingo Molnar
f701d35407 Merge branches 'tracing/ftrace' and 'linus' into tracing/core 2009-02-27 09:04:43 +01:00
Jens Axboe
1e42807918 block: reduce stack footprint of blk_recount_segments()
blk_recalc_rq_segments() requires a request structure passed in, which
we don't have from blk_recount_segments(). So the latter allocates one on
the stack, using > 400 bytes of stack for that. This can cause us to spill
over one page of stack from ext4 at least:

 0)     4560     400   blk_recount_segments+0x43/0x62
 1)     4160      32   bio_phys_segments+0x1c/0x24
 2)     4128      32   blk_rq_bio_prep+0x2a/0xf9
 3)     4096      32   init_request_from_bio+0xf9/0xfe
 4)     4064     112   __make_request+0x33c/0x3f6
 5)     3952     144   generic_make_request+0x2d1/0x321
 6)     3808      64   submit_bio+0xb9/0xc3
 7)     3744      48   submit_bh+0xea/0x10e
 8)     3696     368   ext4_mb_init_cache+0x257/0xa6a [ext4]
 9)     3328     288   ext4_mb_regular_allocator+0x421/0xcd9 [ext4]
10)     3040     160   ext4_mb_new_blocks+0x211/0x4b4 [ext4]
11)     2880     336   ext4_ext_get_blocks+0xb61/0xd45 [ext4]
12)     2544      96   ext4_get_blocks_wrap+0xf2/0x200 [ext4]
13)     2448      80   ext4_da_get_block_write+0x6e/0x16b [ext4]
14)     2368     352   mpage_da_map_blocks+0x7e/0x4b3 [ext4]
15)     2016     352   ext4_da_writepages+0x2ce/0x43c [ext4]
16)     1664      32   do_writepages+0x2d/0x3c
17)     1632     144   __writeback_single_inode+0x162/0x2cd
18)     1488      96   generic_sync_sb_inodes+0x1e3/0x32b
19)     1392      16   sync_sb_inodes+0xe/0x10
20)     1376      48   writeback_inodes+0x69/0xb3
21)     1328     208   balance_dirty_pages_ratelimited_nr+0x187/0x2f9
22)     1120     224   generic_file_buffered_write+0x1d4/0x2c4
23)      896     176   __generic_file_aio_write_nolock+0x35f/0x393
24)      720      80   generic_file_aio_write+0x6c/0xc8
25)      640      80   ext4_file_write+0xa9/0x137 [ext4]
26)      560     320   do_sync_write+0xf0/0x137
27)      240      48   vfs_write+0xb3/0x13c
28)      192      64   sys_write+0x4c/0x74
29)      128     128   system_call_fastpath+0x16/0x1b

Split the segment counting out into a __blk_recalc_rq_segments() helper
to avoid allocating an onstack request just for checking the physical
segment count.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-26 10:45:48 +01:00
Márton Németh
9e8c0bccdc block: add documentation for register_blkdev()
Add documentation for register_blkdev() function and for the parameters.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-26 10:45:48 +01:00
Peter Zijlstra
6e2756376c generic-ipi: remove CSD_FLAG_WAIT
Oleg noticed that we don't strictly need CSD_FLAG_WAIT, rework
the code so that we can use CSD_FLAG_LOCK for both purposes.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 14:13:44 +01:00
Ingo Molnar
0edcf8d692 Merge branch 'tj-percpu' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into core/percpu
Conflicts:
	arch/x86/include/asm/pgtable.h
2009-02-24 21:52:45 +01:00
Rusty Russell
313e458f81 alloc_percpu: add align argument to __alloc_percpu.
This prepares for a real __alloc_percpu, by adding an alignment argument.
Only one place uses __alloc_percpu directly, and that's for a string.

tj: af_inet also uses __alloc_percpu(), update it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
2009-02-20 16:29:08 +09:00
Ingo Molnar
72c26c9a26 Merge branch 'linus' into tracing/blktrace
Conflicts:
	block/blktrace.c

Semantic merge:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 09:00:35 +01:00
Hannes Reinecke
be987fdb55 block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list
blk_abort_queue() iterates the timeout list and aborts each request on the
list, but if the driver error handling readds a request to the timeout list
during this processing, we could be looping forever. Fix this by splicing
current entries to a local list and run over that list instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18 10:34:16 +01:00
Neil Brown
41b8c853a4 block: fix booting from partitioned md array
Hi Tejun,

 it looks like your commit:

   block: don't depend on consecutive minor space
   f331c0296f

 broke a particular case for booting from partitioned md/raid devices.
 That is the second time this has been broken recently.  The previous
 time was fixed by

   block: do_mounts - accept root=<non-existant partition>
   30f2f0eb4b

 Because the data isn't available when an md device is first created
 (we add disks and set it up after creation), the initial partition
 scan finds nothing.  It is not until the device is opened that
 another partition scan happens and finds something.

 So at the point where the kernel parameter "root=/dev/md_d0p1" is
 being parsed, md_d0 exists, but md_d0p1 does not.
 However if we let blk_lookup_devt return the correct device number
 even though the device doesn't exist, then the attempt to mount it
 will successfully find the partition.

 I have tried in the past to find a way to get the partition table to
 be read as soon as the array is assembled but that proved impossible
 (at the time).  I don't remember the details, and could possibly
 revisit it.  However it would be really nice if blk_lookup_devt
 could be adjusted to again accept non existant partitions.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18 10:33:59 +01:00
Jens Axboe
93dbb39350 block: fix bad definition of BIO_RW_SYNC
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO
and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before
213d9417fe.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18 10:32:00 +01:00
Boaz Harrosh
c1c201200a bsg: Fix sense buffer bug in SG_IO
When submitting requests via SG_IO, which does a sync io, a
bsg_command is not allocated. So an in-Kernel sense_buffer was not
set. However when calling blk_execute_rq() with no sense buffer
one is provided from the stack. Now bsg at blk_complete_sgv4_hdr_rq()
would check if rq->sense_len and a sense was requested by sg_io_v4
the rq->sense was copy_user() back, but by now it is already mangled
stack memory.

I have fixed that by forcing a sense_buffer when calling bsg_map_hdr().
The bsg_command->sense is provided in the write/read path like before,
and on-the-stack buffer is provided when doing SG_IO.

I have also fixed a dprintk message to print rq->errors in hex because
of the scsi bit-field use of this member. For other block devices it
does not matter anyway.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18 10:32:00 +01:00
Frederic Weisbecker
2db270a80b tracing/blktrace: move the tracing file to kernel/trace
Impact: cleanup

Move blktrace.c to kernel/trace, also move its config entry.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 10:51:02 +01:00
Arnaldo Carvalho de Melo
b6f11df26f trace: Call tracing_reset_online_cpus before tracer->init()
Impact: cleanup

To make it easy for ftrace plugin writers, as this was open coded in
the existing plugins

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06 01:01:41 +01:00
Arnaldo Carvalho de Melo
51a763dd84 tracing: Introduce trace_buffer_{lock_reserve,unlock_commit}
Impact: new API

These new functions do what previously was being open coded, reducing
the number of details ftrace plugin writers have to worry about.

It also standardizes the handling of stacktrace, userstacktrace and
other trace options we may introduce in the future.

With this patch, for instance, the blk tracer (and some others already
in the tree) can use the "userstacktrace" /d/tracing/trace_options
facility.

$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
  trace_vprintk              |   -5
  trace_graph_return         |  -22
  trace_graph_entry          |  -26
  trace_function             |  -45
  __ftrace_trace_stack       |  -27
  ftrace_trace_userstack     |  -29
  tracing_sched_switch_trace |  -66
  tracing_stop               |   +1
  trace_seq_to_user          |   -1
  ftrace_trace_special       |  -63
  ftrace_special             |   +1
  tracing_sched_wakeup_trace |  -70
  tracing_reset_online_cpus  |   -1
 13 functions changed, 2 bytes added, 355 bytes removed, diff: -353

linux-2.6-tip/block/blktrace.c:
  __blk_add_trace |  -58
 1 function changed, 58 bytes removed, diff: -58

linux-2.6-tip/kernel/trace/trace.c:
  trace_buffer_lock_reserve  |  +88
  trace_buffer_unlock_commit |  +86
 2 functions changed, 174 bytes added, diff: +174

/tmp/vmlinux.after:
 16 functions changed, 176 bytes added, 413 bytes removed, diff: -237

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06 01:01:41 +01:00
Arnaldo Carvalho de Melo
0a9877514c ring_buffer: remove unused flags parameter
Impact: API change, cleanup

>From ring_buffer_{lock_reserve,unlock_commit}.

$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
  trace_vprintk              |  -14
  trace_graph_return         |  -14
  trace_graph_entry          |  -10
  trace_function             |   -8
  __ftrace_trace_stack       |   -8
  ftrace_trace_userstack     |   -8
  tracing_sched_switch_trace |   -8
  ftrace_trace_special       |  -12
  tracing_sched_wakeup_trace |   -8
 9 functions changed, 90 bytes removed, diff: -90

linux-2.6-tip/block/blktrace.c:
  __blk_add_trace |   -1
 1 function changed, 1 bytes removed, diff: -1

/tmp/vmlinux.after:
 10 functions changed, 91 bytes removed, diff: -91

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06 01:01:40 +01:00
Arnaldo Carvalho de Melo
7be421510b trace: Remove unused trace_array_cpu parameter
Impact: cleanup

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 14:35:47 +01:00
Arnaldo Carvalho de Melo
268ccda0cb trace: assign defaults at register_ftrace_event
Impact: simplification of tracers

As all tracers are doing this we might as well do it in
register_ftrace_event and save one branch each time we call these
callbacks.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 14:35:46 +01:00
Arnaldo Carvalho de Melo
ae7462b4f1 trace: make the trace_event callbacks return enum print_line_t
As they actually all return these enumerators.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-04 20:48:39 +01:00
Arnaldo Carvalho de Melo
d9793bd801 trace: judicious error checking of trace_seq results
Impact: bugfix and cleanup

Some callsites were returning either TRACE_ITER_PARTIAL_LINE if the
trace_seq routines (trace_seq_printf, etc) returned 0 meaning its buffer
was full, or zero otherwise.

But...

/* Return values for print_line callback */
enum print_line_t {
        TRACE_TYPE_PARTIAL_LINE = 0,    /* Retry after flushing the seq */
        TRACE_TYPE_HANDLED      = 1,
        TRACE_TYPE_UNHANDLED    = 2     /* Relay to other output functions */
};

In other cases the return value was not being relayed at all.

Most of the time it didn't hurt because the page wasn't get filled, but
for correctness sake, handle the return values everywhere.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-04 20:48:30 +01:00
Arnaldo Carvalho de Melo
939b366977 blktrace: fix coding style in recent patches
Impact: cleanup

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 16:21:34 +01:00
Arnaldo Carvalho de Melo
08a06b83ff blkftrace: binary tracing, synthesizing old format
Impact: new feature

With this and a blkrawverify modified not to verify the sequence numbers
we can start using the userspace tools to verify that the data produced
with the ftrace plugin works as expected.

Example:

[root@f10-1 ~]# echo 1 > /sys/block/sda/sda1/trace/enable
[root@f10-1 ~]# echo bin > /d/tracing/trace_options
[root@f10-1 ~]# echo blk > /d/tracing/current_tracer
[root@f10-1 ~]# cat /d/tracing/trace_pipe > sda1.blktrace.0
^C
[root@f10-1 ~]# ./blkrawverify --noseq sda1
Verifying sda1
    CPU 0
Wrote output to sda1.verify.out
[root@f10-1 ~]# cat sda1.verify.out

---------------
Verifying sda1
    ---------------------
    Summary for cpu 0:
          1349 valid +          0 invalid (100.0%) processed

[root@f10-1 ~]#

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 14:03:53 +01:00
Arnaldo Carvalho de Melo
2c9b238eb3 trace: Change struct trace_event callbacks parameter list
Impact: API change

The trace_seq and trace_entry are in trace_iterator, where there are
more fields that may be needed by tracers, so just pass the
tracer_iterator as is already the case for struct tracer->print_line.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 14:03:52 +01:00
Ingo Molnar
dc573f9b20 Merge branches 'tracing/ftrace', 'tracing/kmemtrace' and 'linus' into tracing/core 2009-02-03 06:25:38 +01:00
Jens Axboe
fb8ec18c31 block: fix oops in blk_queue_io_stat()
Some initial probe requests don't have disk->queue mapped yet, so we
can't rely on a non-NULL queue in blk_queue_io_stat(). Wrap it in
blk_do_io_stat().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-02 08:42:32 +01:00
Divyesh Shah
3a9a3f6cc5 cfq-iosched: Allow RT requests to pre-empt ongoing BE timeslice
This patch adds the ability to pre-empt an ongoing BE timeslice when a RT
request is waiting for the current timeslice to complete. This reduces the
wait time to disk for RT requests from an upper bound of 4 (current value
of cfq_quantum) to 1 disk request.

Applied Jens' suggeested changes to avoid the rb lookup and use !cfq_class_rt()
and retested.

Latency(secs) for the RT task when doing sequential reads from 10G file.
                       | only RT | RT + BE | RT + BE + this patch
small (512 byte) reads | 143     | 163     | 145
large (1Mb) reads      | 142     | 158     | 146

Signed-off-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:47:33 +01:00
Jens Axboe
bc58ba9468 block: add sysfs file for controlling io stats accounting
This allows us to turn off disk stat accounting completely, for the cases
where the 0.5-1% reduction in system time is important.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:34:38 +01:00
Jens Axboe
cec0707e40 block: silently error an unsupported barrier bio
This fixes a "regression" from 2.6.28, where the barrier probes that file
systems may do would trigger additional end request warnings in dmesg.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:34:37 +01:00
Theodore Ts'o
dbdac9b71d block: Fix documentation for blkdev_issue_flush()
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:34:37 +01:00
Jens Axboe
213d9417fe block: seperate bio/request unplug and sync bits
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:34:37 +01:00
Bartlomiej Zolnierkiewicz
1308835fff block: export SSD/non-rotational queue flag through sysfs
For some devices (i.e. CFA ATA) we can't reliably detect whether
the device is of rotational or non-rotational type so we need to
leave the final decision about this setting to the user-space.

As a bonus do a minor CodingStyle fixup in queue_nomerges_store().

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:34:37 +01:00
Jens Axboe
f48fc4d32e block: get rid of the manual directory counting in blktrace
It can result in a stuck blktrace system, if --kill is used.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:34:36 +01:00
Martin K. Petersen
322316385d block: Allow empty integrity profile
Allow a block device to allocate and register an integrity profile
without providing a template.  This allows DM to preallocate a profile
to avoid deadlocks during table reconfiguration.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30 12:34:36 +01:00
Arnaldo Carvalho de Melo
700a3dcb90 blktrace: Use tracing_reset_online_cpus
Impact: cleanup

Use tracing_reset_online_cpus instead of open coding it.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:28:30 +01:00
Arnaldo Carvalho de Melo
32c0bd9624 blktrace: the ftrace interface needs CONFIG_TRACING
Impact: build fix

Also mention in the help text that blktrace now can be used using
the ftrace interface.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-27 14:30:36 +01:00
Arnaldo Carvalho de Melo
157f9c00e8 tracing/blktrace: fix up checkpatch reported problems in ftrace plugin patch
Also make sure sparse (make C=2 block/blktrace.o) is happy too.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 18:30:01 +01:00
Arnaldo Carvalho de Melo
c71a896154 blktrace: add ftrace plugin
Impact: New way of using the blktrace infrastructure

This drops the requirement of userspace utilities to use the blktrace
facility.

Configuration is done thru sysfs, adding a "trace" directory to the
partition directory where blktrace can be enabled for the associated
request_queue.

The same filters present in the IOCTL interface are present as sysfs
device attributes.

The /sys/block/sdX/sdXN/trace/enable file allows tracing without any
filters.

The other files in this directory: pid, act_mask, start_lba and end_lba
can be used with the same meaning as with the IOCTL interface.

Using the sysfs interface will only setup the request_queue->blk_trace
fields, tracing will only take place when the "blk" tracer is selected
via the ftrace interface, as in the following example:

To see the trace, one can use the /d/tracing/trace file or the
/d/tracign/trace_pipe file, with semantics defined in the ftrace
documentation in Documentation/ftrace.txt.

[root@f10-1 ~]# cat /t/trace
       kjournald-305   [000]  3046.491224:   8,1    A WBS 6367 + 8 <- (8,1) 6304
       kjournald-305   [000]  3046.491227:   8,1    Q   R 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491236:   8,1    G  RB 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491239:   8,1    P  NS [kjournald]
       kjournald-305   [000]  3046.491242:   8,1    I RBS 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491251:   8,1    D  WB 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491610:   8,1    U  WS [kjournald] 1
          <idle>-0     [000]  3046.511914:   8,1    C  RS 6367 + 8 [6367]
[root@f10-1 ~]#

The default line context (prefix) format is the one described in the ftrace
documentation, with the blktrace specific bits using its existing format,
described in blkparse(8).

If one wants to have the classic blktrace formatting, this is possible by
using:

[root@f10-1 ~]# echo blk_classic > /t/trace_options
[root@f10-1 ~]# cat /t/trace
  8,1    0  3046.491224   305  A WBS 6367 + 8 <- (8,1) 6304
  8,1    0  3046.491227   305  Q   R 6367 + 8 [kjournald]
  8,1    0  3046.491236   305  G  RB 6367 + 8 [kjournald]
  8,1    0  3046.491239   305  P  NS [kjournald]
  8,1    0  3046.491242   305  I RBS 6367 + 8 [kjournald]
  8,1    0  3046.491251   305  D  WB 6367 + 8 [kjournald]
  8,1    0  3046.491610   305  U  WS [kjournald] 1
  8,1    0  3046.511914     0  C  RS 6367 + 8 [6367]
[root@f10-1 ~]#

Using the ftrace standard format allows more flexibility, such
as the ability of asking for backtraces via trace_options:

[root@f10-1 ~]# echo noblk_classic > /t/trace_options
[root@f10-1 ~]# echo stacktrace > /t/trace_options

[root@f10-1 ~]# cat /t/trace
       kjournald-305   [000]  3318.826779:   8,1    A WBS 6375 + 8 <- (8,1) 6312
       kjournald-305   [000]  3318.826782:
 <= submit_bio
 <= submit_bh
 <= sync_dirty_buffer
 <= journal_commit_transaction
 <= kjournald
 <= kthread
 <= child_rip
       kjournald-305   [000]  3318.826836:   8,1    Q   R 6375 + 8 [kjournald]
       kjournald-305   [000]  3318.826837:
 <= generic_make_request
 <= submit_bio
 <= submit_bh
 <= sync_dirty_buffer
 <= journal_commit_transaction
 <= kjournald
 <= kthread

Please read the ftrace documentation to use aditional, standardized
tracing filters such as /d/tracing/trace_cpumask, etc.

See also /d/tracing/trace_mark to add comments in the trace stream,
that is equivalent to the /d/block/sdaN/msg interface.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 14:40:53 +01:00
Linus Torvalds
2150edc6c5 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
  jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
  ext4: Remove "extents" mount option
  block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
  ext4: Make printk's consistently prefixed with "EXT4-fs: "
  ext4: Add sanity checks for the superblock before mounting the filesystem
  ext4: Add mount option to set kjournald's I/O priority
  jbd2: Submit writes to the journal using WRITE_SYNC
  jbd2: Add pid and journal device name to the "kjournald2 starting" message
  ext4: Add markers for better debuggability
  ext4: Remove code to create the journal inode
  ext4: provide function to release metadata pages under memory pressure
  ext3: provide function to release metadata pages under memory pressure
  add releasepage hooks to block devices which can be used by file systems
  ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
  ext4: Init the complete page while building buddy cache
  ext4: Don't allow new groups to be added during block allocation
  ext4: mark the blocks/inode bitmap beyond end of group as used
  ext4: Use new buffer_head flag to check uninit group bitmaps initialization
  ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
  ext4: code cleanup
  ...
2009-01-08 17:14:59 -08:00
Linus Torvalds
cd764695b6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits)
  [SCSI] qla2xxx: Update version number to 8.03.00-k1.
  [SCSI] qla2xxx: Add ISP81XX support.
  [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.
  [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.
  [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
  [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.
  [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
  [SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
  [SCSI] cxgb3i: add missing include
  [SCSI] scsi_lib: fix DID_RESET status problems
  [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD
  [SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts
  [SCSI] sd: Correctly handle 6-byte commands with DIX
  [SCSI] sd: DIF: Fix tagging on platforms with signed char
  [SCSI] sd: DIF: Show app tag on error
  [SCSI] Fix error handling for DIF/DIX
  [SCSI] scsi_lib: don't decrement busy counters when inserting commands
  [SCSI] libsas: fix test for negative unsigned and typos
  [SCSI] a2091, gvp11: kill warn_unused_result warnings
  [SCSI] fusion: Move a dereference below a NULL test
  ...

Fixed up trivial conflict due to moving the async part of sd_probe
around in the async probes vs using dev_set_name() in naming.
2009-01-08 16:27:31 -08:00
Theodore Ts'o
4d783b093c block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-01-06 15:16:33 -05:00
Kay Sievers
3ada8b7e98 block: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:43 -08:00
FUJITA Tomonori
97ae77a1cd [SCSI] block: make blk_rq_map_user take a NULL user-space buffer for WRITE
The commit 818827669d (block: make
blk_rq_map_user take a NULL user-space buffer) extended
blk_rq_map_user to accept a NULL user-space buffer with a READ
command. It was necessary to convert sg to use the block layer mapping
API.

This patch extends blk_rq_map_user again for a WRITE command. It is
necessary to convert st and osst drivers to use the block layer
apping API.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 11:10:35 -06:00
FUJITA Tomonori
56c451f4b5 [SCSI] block: fix the partial mappings with struct rq_map_data
This fixes bio_copy_user_iov to properly handle the partial mappings
with struct rq_map_data (which only sg uses for now but st and osst
will shortly). It adds the offset member to struct rq_map_data and
changes blk_rq_map_user to update it so that bio_copy_user_iov can add
an appropriate page frame via bio_add_pc_page().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 11:10:08 -06:00
Rusty Russell
2ca1a61583 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	arch/x86/kernel/io_apic.c
2008-12-31 23:05:57 +10:30
Rusty Russell
33edcf133b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-12-30 08:02:35 +10:30
Jens Axboe
62c1fe9d9f cfq-iosched: fix race between exiting queue and exiting task
Original patch from Nikanth Karthikesan <knikanth@suse.de>

When a queue exits the queue lock is taken and cfq_exit_queue() would free all
the cic's associated with the queue.

But when a task exits, cfq_exit_io_context() gets cic one by one and then
locks the associated queue to call __cfq_exit_single_io_context. It looks like
between getting a cic from the ioc and locking the queue, the queue might have
exited on another cpu.

Fix this by rechecking the cfq_io_context queue key inside the queue lock
again, and not calling into __cfq_exit_single_io_context() if somebody
beat us to it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:52 +01:00
Jens Axboe
b3a6ffe16b Get rid of CONFIG_LSF
We have two seperate config entries for large devices/files. One
is CONFIG_LBD that guards just the devices, the other is CONFIG_LSF
that handles large files. This doesn't make a lot of sense, you typically
want both or none. So get rid of CONFIG_LSF and change CONFIG_LBD wording
to indicate that it covers both.

Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:51 +01:00
Roel Kluin
3c18ce71af block: make blk_softirq_init() static
Sparse asked whether these could be static.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:51 +01:00
FUJITA Tomonori
18af8b2ca3 block: use min_not_zero in blk_queue_stack_limits
zero is invalid for max_phys_segments, max_hw_segments, and
max_segment_size. It's better to use use min_not_zero instead of
min. min() works though (because the commit 0e435ac makes sure that
these values are set to the default values, non zero, if a queue is
initialized properly).

With this patch, blk_queue_stack_limits does the almost same thing
that dm's combine_restrictions_low() does. I think that it's easy to
remove dm's combine_restrictions_low.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:51 +01:00
Jens Axboe
a6f23657d3 block: add one-hit cache for disk partition lookup
disk_map_sector_rcu() returns a partition from a sector offset,
which we use for IO statistics on a per-partition basis. The
lookup itself is an O(N) list lookup, where N is the number of
partitions. This actually hurts performance quite a bit, even
on the lower end partitions. On higher numbered partitions,
it can get pretty bad.

Solve this by adding a one-hit cache for partition lookup.
This makes the lookup O(1) for the case where we do most IO to
one partition. Even for mixed partition workloads, amortized cost
is pretty close to O(1) since the natural IO batching makes the
one-hit cache last for lots of IOs.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:51 +01:00
Jens Axboe
30e0dc28bf cfq-iosched: remove limit of dispatch depth of max 4 times quantum
This basically limits the hardware queue depth to 4*quantum at any
point in time, which is 16 with the default settings. As CFQ uses
other means to shrink the hardware queue when necessary in the first
place, there's really no need for this extra heuristic. Additionally,
it ends up hurting performance in some cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:51 +01:00
Jens Axboe
b374d18a4b block: get rid of elevator_t typedef
Just use struct elevator_queue everywhere instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:50 +01:00
Jens Axboe
a31a97381c block: don't use plugging on SSD devices
We just want to hand the first bits of IO to the device as fast
as possible. Gains a few percent on the IOPS rate.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:45 +01:00
Tejun Heo
a185eb4bc8 block: fix empty barrier on write-through w/ ordered tag
Empty barrier on write-through (or no cache) w/ ordered tag has no
command to execute and without any command to execute ordered tag is
never issued to the device and the ordering is never achieved.  Force
draining for such cases.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:45 +01:00
Tejun Heo
58eea927d2 block: simplify empty barrier implementation
Empty barrier required special handling in __elv_next_request() to
complete it without letting the low level driver see it.

With previous changes, barrier code is now flexible enough to skip the
BAR step using the same barrier sequence selection mechanism.  Drop
the special handling and mask off q->ordered from start_ordered().

Remove blk_empty_barrier() test which now has no user.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:45 +01:00
Tejun Heo
8f11b3e99a block: make barrier completion more robust
Barrier completion had the following assumptions.

* start_ordered() couldn't finish the whole sequence properly.  If all
  actions are to be skipped, q->ordseq is set correctly but the actual
  completion was never triggered thus hanging the barrier request.

* Drain completion in elv_complete_request() assumed that there's
  always at least one request in the queue when drain completes.

Both assumptions are true but these assumptions need to be removed to
improve empty barrier implementation.  This patch makes the following
changes.

* Make start_ordered() use blk_ordered_complete_seq() to mark skipped
  steps complete and notify __elv_next_request() that it should fetch
  the next request if the whole barrier has completed inside
  start_ordered().

* Make drain completion path in elv_complete_request() check whether
  the queue is empty.  Empty queue also indicates drain completion.

* While at it, convert 0/1 return from blk_do_ordered() to false/true.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:45 +01:00
Tejun Heo
f671620e7d block: make every barrier action optional
In all barrier sequences, the barrier write itself was always assumed
to be issued and thus didn't have corresponding control flag.  This
patch adds QUEUE_ORDERED_DO_BAR and unify action mask handling in
start_ordered() such that any barrier action can be skipped.

This patch doesn't introduce any visible behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:45 +01:00
Tejun Heo
a7384677b2 block: remove duplicate or unused barrier/discard error paths
* Because barrier mode can be changed dynamically, whether barrier is
  supported or not can be determined only when actually issuing the
  barrier and there is no point in checking it earlier.  Drop barrier
  support check in generic_make_request() and __make_request(), and
  update comment around the support check in blk_do_ordered().

* There is no reason to check discard support in both
  generic_make_request() and __make_request().  Drop the check in
  __make_request().  While at it, move error action block to the end
  of the function and add unlikely() to q existence test.

* Barrier request, be it empty or not, is never passed to low level
  driver and thus it's meaningless to try to copy back req->sector to
  bio->bi_sector on error.  In addition, the notion of failed sector
  doesn't make any sense for empty barrier to begin with.  Drop the
  code block from __end_that_request_first().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Tejun Heo
313e42999d block: reorganize QUEUE_ORDERED_* constants
Separate out ordering type (drain,) and action masks (preflush,
postflush, fua) from visible ordering mode selectors
(QUEUE_ORDERED_*).  Ordering types are now named QUEUE_ORDERED_BY_*
while action masks are named QUEUE_ORDERED_DO_*.

This change is necessary to add QUEUE_ORDERED_DO_BAR and make it
optional to improve empty barrier implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Cheng Renquan
64d01dc9e1 block: use cancel_work_sync() instead of kblockd_flush_work()
After many improvements on kblockd_flush_work, it is now identical to
cancel_work_sync, so a direct call to cancel_work_sync is suggested.

The only difference is that cancel_work_sync is a GPL symbol,
so no non-GPL modules anymore.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Keith Mannthey
08bafc0341 block: Supress Buffer I/O errors when SCSI REQ_QUIET flag set
Allow the scsi request REQ_QUIET flag to be propagated to the buffer
file system layer. The basic ideas is to pass the flag from the scsi
request to the bio (block IO) and then to the buffer layer.  The buffer
layer can then suppress needless printks.

This patch declutters the kernel log by removed the 40-50 (per lun)
buffer io error messages seen during a boot in my multipath setup . It
is a good chance any real errors will be missed in the "noise" it the
logs without this patch.

During boot I see blocks of messages like
"
__ratelimit: 211 callbacks suppressed
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242847
Buffer I/O error on device sdm, logical block 1
Buffer I/O error on device sdm, logical block 5242878
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242872
"
in my logs.

My disk environment is multipath fiber channel using the SCSI_DH_RDAC
code and multipathd.  This topology includes an "active" and "ghost"
path for each lun. IO's to the "ghost" path will never complete and the
SCSI layer, via the scsi device handler rdac code, quick returns the IOs
to theses paths and sets the REQ_QUIET scsi flag to suppress the scsi
layer messages.

 I am wanting to extend the QUIET behavior to include the buffer file
system layer to deal with these errors as well. I have been running this
patch for a while now on several boxes without issue.  A few runs of
bonnie++ show no noticeable difference in performance in my setup.

Thanks for John Stultz for the quiet_error finalization.

Submitted-by:  Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Wu Fengguang
7c239517d9 block: don't take lock on changing ra_pages
There's no need to take queue_lock or kernel_lock when modifying
bdi->ra_pages. So remove them. Also remove out of date comment for
queue_max_sectors_store().

Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:43 +01:00
Qinghuang Feng
c6a06f707c block/blk-tag.c: cleanup kernel-doc
There is no argument named @tags in blk_init_tags,
remove its' comment.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:43 +01:00
Milton Miller
2b91bafcc0 scsi-ioctl: use clock_t <> jiffies
Convert the timeout ioctl scalling to use the clock_t functions
which are much more accurate with some USER_HZ vs HZ combinations.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:42 +01:00
Jens Axboe
70ed28b92a block: leave the request timeout timer running even on an empty list
For sync IO, we'll often do them serialized. This means we'll be touching
the queue timer for every IO, as opposed to only occasionally like we
do for queued IO. Instead of deleting the timer when the last request
is removed, just let continue running. If a new request comes up soon
we then don't have to readd the timer again. If no new requests arrive,
the timer will expire without side effect later.

This improves high iops sync IO by ~1%.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:42 +01:00
Jens Axboe
65d3618ccf block: add comment in blk_rq_timed_out() about why next can not be 0
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:42 +01:00
malahal@us.ibm.com
565e411d76 block: optimizations in blk_rq_timed_out_timer()
Now the rq->deadline can't be zero if the request is in the
timeout_list, so there is no need to have next_set. There is no need to
access a request's deadline field if blk_rq_timed_out is called on it.

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:42 +01:00
Rusty Russell
be4d638c15 cpumask: Replace cpu_coregroup_map with cpu_coregroup_mask
cpu_coregroup_map returned a cpumask_t: it's going away.

(Note, the sched part of this patch won't apply meaningfully to the
sched tree, but I'm posting it to show the goal).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
2008-12-26 22:23:43 +10:30
Ingo Molnar
30cd324e97 Merge branches 'tracing/ftrace', 'tracing/ring-buffer' and 'tracing/urgent' into tracing/core
Conflicts:
	include/linux/ftrace.h
2008-12-19 09:42:40 +01:00
Linus Torvalds
f2f1fa78a1 Enforce a minimum SG_IO timeout
There's no point in having too short SG_IO timeouts, since if the
command does end up timing out, we'll end up through the reset sequence
that is several seconds long in order to abort the command that timed
out.

As a result, shorter timeouts than a few seconds simply do not make
sense, as the recovery would be longer than the timeout itself.

Add a BLK_MIN_SG_TIMEOUT to match the existign BLK_DEFAULT_SG_TIMEOUT.

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-05 14:49:18 -08:00
Ingo Molnar
970987beb9 Merge branches 'tracing/ftrace', 'tracing/function-graph-tracer' and 'tracing/urgent' into tracing/core 2008-12-05 14:45:22 +01:00
Christoph Hellwig
fd4ce1acd0 [PATCH 1/2] kill FMODE_NDELAY_NOW
Update FMODE_NDELAY before each ioctl call so that we can kill the
magic FMODE_NDELAY_NOW.  It would be even better to do this directly
in setfl(), but for that we'd need to have FMODE_NDELAY for all files,
not just block special files.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-04 04:22:57 -05:00
Andreas Schwab
1c925604e1 [PATCH] Fix block dev compat ioctl handling
Commit 33c2dca495 (trim file propagation
in block/compat_ioctl.c) removed the handling of some ioctls from
compat_blkdev_driver_ioctl.  That caused them to be rejected as unknown
by the compat layer.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-04 04:22:55 -05:00
Milan Broz
0e435ac26e block: fix setting of max_segment_size and seg_boundary mask
Fix setting of max_segment_size and seg_boundary mask for stacked md/dm
devices.

When stacking devices (LVM over MD over SCSI) some of the request queue
parameters are not set up correctly in some cases by default, namely
max_segment_size and and seg_boundary mask.

If you create MD device over SCSI, these attributes are zeroed.

Problem become when there is over this mapping next device-mapper mapping
- queue attributes are set in DM this way:

request_queue   max_segment_size  seg_boundary_mask
SCSI                65536             0xffffffff
MD RAID1                0                      0
LVM                 65536                 -1 (64bit)

Unfortunately bio_add_page (resp.  bio_phys_segments) calculates number of
physical segments according to these parameters.

During the generic_make_request() is segment cout recalculated and can
increase bio->bi_phys_segments count over the allowed limit.  (After
bio_clone() in stack operation.)

Thi is specially problem in CCISS driver, where it produce OOPS here

    BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);

(MAXSEGENTRIES is 31 by default.)

Sometimes even this command is enough to cause oops:

  dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10

This command generates bios with 250 sectors, allocated in 32 4k-pages
(last page uses only 1024 bytes).

For LVM layer, it allocates bio with 31 segments (still OK for CCISS),
unfortunatelly on lower layer it is recalculated to 32 segments and this
violates CCISS restriction and triggers BUG_ON().

The patch tries to fix it by:

 * initializing attributes above in queue request constructor
   blk_queue_make_request()

 * make sure that blk_queue_stack_limits() inherits setting

 (DM uses its own function to set the limits because it
 blk_queue_stack_limits() was introduced later.  It should probably switch
 to use generic stack limit function too.)

 * sets the default seg_boundary value in one place (blkdev.h)

 * use this mask as default in DM (instead of -1, which differs in 64bit)

Bugs related to this:
https://bugzilla.redhat.com/show_bug.cgi?id=471639
http://bugzilla.kernel.org/show_bug.cgi?id=8672

Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:55:55 +01:00
Tejun Heo
53a08807c0 block: internal dequeue shouldn't start timer
blkdev_dequeue_request() and elv_dequeue_request() are equivalent and
both start the timeout timer.  Barrier code dequeues the original
barrier request but doesn't passes the request itself to lower level
driver, only broken down proxy requests; however, as the original
barrier code goes through the same dequeue path and timeout timer is
started on it.  If barrier sequence takes long enough, this timer
expires but the low level driver has no idea about this request and
oops follows.

Timeout timer shouldn't have been started on the original barrier
request as it never goes through actual IO.  This patch unexports
elv_dequeue_request(), which has no external user anyway, and makes it
operate on elevator proper w/o adding the timer and make
blkdev_dequeue_request() call elv_dequeue_request() and add timer.
Internal users which don't pass the request to driver - barrier code
and end_that_request_last() - are converted to use
elv_dequeue_request().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:41:26 +01:00
Cheng Renquan
bf91db18ac block: set disk->node_id before it's being used
disk->node_id will be refered in allocating in disk_expand_part_tbl, so we
should set it before disk->node_id is refered.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:41:20 +01:00
Petr Vandrovec
53cc0b2948 When block layer fails to map iov, it calls bio_unmap_user to undo
mapping.  Which is good if pages were mapped - but if they were provided
by someone else and just copied then bad things happen - pages are
released once here, and once by caller, leading to user triggerable BUG
at include/linux/mm.h:246.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:41:20 +01:00
Ingo Molnar
0bfc24559d blktrace: port to tracepoints, update
Port to the new tracepoints API: split DEFINE_TRACE() and DECLARE_TRACE()
sites. Spread them out to the usage sites, as suggested by
Mathieu Desnoyers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
2008-11-26 13:04:35 +01:00
Arnaldo Carvalho de Melo
5f3ea37c77 blktrace: port to tracepoints
This was a forward port of work done by Mathieu Desnoyers, I changed it to
encode the 'what' parameter on the tracepoint name, so that one can register
interest in specific events and not on classes of events to then check the
'what' parameter.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 12:13:34 +01:00
Jens Axboe
c26156b253 block: hold extra reference to bio in blk_rq_map_user_iov()
If the size passed in is OK but we end up mapping too many segments,
we call the unmap path directly like from IO completion. But from IO
completion we have an extra reference to the bio, so this error case
goes OOPS when it attempts to free and already free bio.

Fix it by getting an extra reference to the bio before calling the
unmap failure case.

Reported-by: Petr Vandrovec <vandrove@vc.cvut.cz>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18 15:08:56 +01:00
Zhang, Yanmin
561ec68e4d block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash
We run into system boot failure with kernel 2.6.28-rc. We found it on a
couple of machines, including T61 notebook, nehalem machine, and another
HPC NX6325 notebook.  All the machines use FedoraCore 8 or FedoraCore 9.
With kernel prior to 2.6.28-rc, system boot doesn't fail.

I debug it and locate the root cause. Pls. see
http://bugzilla.kernel.org/show_bug.cgi?id=11899
https://bugzilla.redhat.com/show_bug.cgi?id=471517

As a matter of fact, there are 2 bugs.

1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times
and fails once. nash has a bug. Some of its functions misuse return
value 0.  Sometimes, 0 means timeout and no uevent available. Sometimes,
0 means nash gets an uevent, but the uevent isn't block-related (for
exmaple, usb). If by coincidence, kernel tells nash that uevents are
available, but kernel also set timeout, nash might stops collecting
other uevents in queue if current uevent isn't block-related.  I work
out a patch for nash to fix it.
http://bugzilla.kernel.org/attachment.cgi?id=18858

2) root=LABEL=/, system always can't boot. initrd init reports
switchroot fails. Here is an executation branch of nash when booting:
    (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop)
    (2) nash query /proc/devices with the major number; It found line
	"8 sd";
    (3) nash use 'sd' to search its own probe table to find device (DISK)
	type for the device and add it to its own list;
    (4) Later on, it probes all devices in its list to get filesystem
	labels; scsi register "8 sd" always.

When major is 259, nash fails to find the device(DISK) type. I enables
CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up
for device /dev/sda1, which causes nash to fail to find device (DISK)
type.

To fixing issue 2), I create a patch for nash and another patch for
kernel.

http://bugzilla.kernel.org/attachment.cgi?id=18859
http://bugzilla.kernel.org/attachment.cgi?id=18837

Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new
block device in proc/devices.

With 2 patches on nash and 1 patch on kernel, I boot my machines for
dozens of times without failure.

Signed-off-by Zhang Yanmin <yanmin.zhang@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18 15:08:56 +01:00
Tejun Heo
ba32929a91 block: make add_partition() return pointer to hd_struct
Make add_partition() return pointer to the new hd_struct on success
and ERR_PTR() value on failure.  This change will be used to fix md
autodetection bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18 15:08:56 +01:00
Alan Stern
7838c15b8d Block: use round_jiffies_up()
This patch (as1159b) changes the timeout routines in the block core to
use round_jiffies_up().  There's no point in rounding the timer
deadline down, since if it expires too early we will have to restart
it.

The patch also removes some unnecessary tests when a request is
removed from the queue's timer list.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-06 08:42:49 +01:00
Mike Anderson
e78042e5b8 blk: move blk_delete_timer call in end_that_request_last
Move the calling  blk_delete_timer to later in end_that_request_last to
address an issue where blkdev_dequeue_request may have add a timer for the
request.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-06 08:41:56 +01:00
Tejun Heo
2920ebbd65 block: add timer on blkdev_dequeue_request() not elv_next_request()
Block queue supports two usage models - one where block driver peeks
at the front of queue using elv_next_request(), processes it and
finishes it and the other where block driver peeks at the front of
queue, dequeue the request using blkdev_dequeue_request() and finishes
it.  The latter is more flexible as it allows the driver to process
multiple commands concurrently.

These two inconsistent usage models affect the block layer
implementation confusing.  For some, elv_next_request() is considered
the issue point while others consider blkdev_dequeue_request() the
issue point.

Till now the inconsistency mostly affect only accounting, so it didn't
really break anything seriously; however, with block layer timeout,
this inconsistency hits hard.  Block layer considers
elv_next_request() the issue point and adds timer but SCSI layer
thinks it was just peeking and when the request can't process the
command right away, it's just left there without further processing.
This makes the request dangling on the timer list and, when the timer
goes off, the request which the SCSI layer and below think is still on
the block queue ends up in the EH queue, causing various problems - EH
hang (failed count goes over busy count and EH never wakes up),
WARN_ON() and oopses as low level driver trying to handle the unknown
command, etc. depending on the timing.

As SCSI midlayer is the only user of block layer timer at the moment,
moving blk_add_timer() to elv_dequeue_request() fixes the problem;
however, this two usage models definitely need to be cleaned up in the
future.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-06 08:41:55 +01:00
FUJITA Tomonori
43381785a5 block: remove unused ll_new_mergeable()
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-06 08:41:55 +01:00
Linus Torvalds
88ed86fee6 Merge branch 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: (35 commits)
  proc: remove fs/proc/proc_misc.c
  proc: move /proc/vmcore creation to fs/proc/vmcore.c
  proc: move pagecount stuff to fs/proc/page.c
  proc: move all /proc/kcore stuff to fs/proc/kcore.c
  proc: move /proc/schedstat boilerplate to kernel/sched_stats.h
  proc: move /proc/modules boilerplate to kernel/module.c
  proc: move /proc/diskstats boilerplate to block/genhd.c
  proc: move /proc/zoneinfo boilerplate to mm/vmstat.c
  proc: move /proc/vmstat boilerplate to mm/vmstat.c
  proc: move /proc/pagetypeinfo boilerplate to mm/vmstat.c
  proc: move /proc/buddyinfo boilerplate to mm/vmstat.c
  proc: move /proc/vmallocinfo to mm/vmalloc.c
  proc: move /proc/slabinfo boilerplate to mm/slub.c, mm/slab.c
  proc: move /proc/slab_allocators boilerplate to mm/slab.c
  proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c
  proc: move /proc/stat to fs/proc/stat.c
  proc: move rest of /proc/partitions code to block/genhd.c
  proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c
  proc: move /proc/devices code to fs/proc/devices.c
  proc: move rest of /proc/locks to fs/locks.c
  ...
2008-10-23 12:04:37 -07:00
Linus Torvalds
5f4f0c4d3f compat_blkdev_driver_ioctl: Remove unused variable warning
Variable 'ret' is no longer used. Don't declare it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23 10:28:25 -07:00
Alexey Dobriyan
31d85ab28e proc: move /proc/diskstats boilerplate to block/genhd.c
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-23 17:57:37 +04:00
Alexey Dobriyan
f500975a3f proc: move rest of /proc/partitions code to block/genhd.c
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-23 15:07:31 +04:00
Al Viro
56b26add02 [PATCH] kill the rest of struct file propagation in block ioctls
Now we can switch blkdev_ioctl() block_device/mode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:14 -04:00
Al Viro
6af3a56e1d [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
We need to do bd_claim() only if file hadn't been opened with O_EXCL
and then we have no need to use file itself as owner.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:12 -04:00
Al Viro
45048d0961 [PATCH] get rid of blkdev_locked_ioctl()
Most of that stuff doesn't need BKL at all; expand in the (only) caller,
merge the switch into one there and leave BKL only around the stuff that
might actually need it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:10 -04:00
Al Viro
e436fdae70 [PATCH] get rid of blkdev_driver_ioctl()
convert remaining callers to __blkdev_driver_ioctl()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:08 -04:00
Al Viro
33c2dca495 [PATCH] trim file propagation in block/compat_ioctl.c
... and remove the handling of cases when it falls back to native
without changing arguments.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:54 -04:00
Al Viro
90b8f2824c [PATCH] end of methods switch: remove the old ones
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:52 -04:00
Al Viro
d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Al Viro
633a08b812 [PATCH] introduce __blkdev_driver_ioctl()
Analog of blkdev_driver_ioctl() with sane arguments.  For
now uses fake struct file, by the end of the series it won't
and blkdev_driver_ioctl() will become a wrapper around it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:26 -04:00
Al Viro
74f3c8aff3 [PATCH] switch scsi_cmd_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:14 -04:00
Al Viro
e915e872ed [PATCH] switch sg_scsi_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:12 -04:00
Al Viro
5842e51ff2 [PATCH] pass mode instead of file to sg_io()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:10 -04:00
Al Viro
aeb5d72706 [PATCH] introduce fmode_t, do annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:06 -04:00
Linus Torvalds
c53dbf5486 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: remove __generic_unplug_device() from exports
  block: move q->unplug_work initialization
  blktrace: pass zfcp driver data
  blktrace: add support for driver data
  block: fix current kernel-doc warnings
  block: only call ->request_fn when the queue is not stopped
  block: simplify string handling in elv_iosched_store()
  block: fix kernel-doc for blk_alloc_devt()
  block: fix nr_phys_segments miscalculation bug
  block: add partition attribute for partition number
  block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT
  softirq: Add support for triggering softirq work on softirqs.
2008-10-17 09:29:55 -07:00
Linus Torvalds
ed09441dac Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n
  libiscsi: fix locking in iscsi_eh_device_reset
  libiscsi: check reason why we are stopping iscsi session to determine error value
  [SCSI] iscsi_tcp: return a descriptive error value during connection errors
  [SCSI] libiscsi: rename host reset to target reset
  [SCSI] iscsi class: fix endpoint id handling
  [SCSI] libiscsi: Support drivers initiating session removal
  [SCSI] libiscsi: fix data corruption when target has to resend data-in packets
  [SCSI] sd: Switch kernel printing level for DIF messages
  [SCSI] sd: Correctly handle all combinations of DIF and DIX
  [SCSI] sd: Always print actual protection_type
  [SCSI] sd: Issue correct protection operation
  [SCSI] scsi_error: fix target reset handling
  [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events
  [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling
  [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted
  [SCSI] scsi_dh_alua: remove REQ_NOMERGE
  [SCSI] lpfc 8.2.8 : update driver version to 8.2.8
  [SCSI] lpfc 8.2.8 : Add MSI-X support
  [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED
  ...
2008-10-17 09:00:23 -07:00
Jens Axboe
f73e2d13a1 block: remove __generic_unplug_device() from exports
The only out-of-core user is IDE, and that should be using
blk_start_queueing() instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 14:03:08 +02:00
Peter Zijlstra
713ada9ba9 block: move q->unplug_work initialization
modprobe loop; rmmod loop effectively creates a blk_queue and destroys it
which results in q->unplug_work being canceled without it ever being
initialized.

Therefore, move the initialization of q->unplug_work from
blk_queue_make_request() to blk_alloc_queue*().

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Randy Dunlap
496aa8a98f block: fix current kernel-doc warnings
Fix block kernel-doc warnings:

Warning(linux-2.6.27-git4//fs/block_dev.c:1272): No description found for parameter 'path'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'cpu'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'part'
Warning(/var/linsrc/linux-2.6.27-git4//block/genhd.c:544): No description found for parameter 'partno'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00