Commit graph

2314 commits

Author SHA1 Message Date
Linus Torvalds
8d86dc6a5b Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)."
This reverts commit cfecde435d, since it
seems to cause some systems to not come up with any video output at all
(or video that only comes on when X starts up).

Fixes bugzilla:

    http://bugzilla.kernel.org/show_bug.cgi?id=16163

Reported-and-tested-by: David John <davidjon@xenontk.org>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
Acked-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08 20:16:28 -07:00
Dave Airlie
b62e948fd0 drm/radeon: don't poll tv dac if crtc2 is in use.
So when we added output polling, we'd suddenly use this code more often, and the fact that it always takes over crtc2 and messes with it during probing isn't what we really want to be happening. A more complete fix would to change it to use whatever crtc was free at the time, but for now lets stay simple and just don't poll if crtc2 is already in use.

Although a more correct fix was found I suspect we should do this as well, until we get a chance to readdres the tv out polling issues.

Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 15:17:48 +10:00
Dave Airlie
d294ed6940 drm/radeon: reset i2c valid to avoid incorrect tv-out polling.
We really don't want to be polling tv-out but since we weren't forcing the
i2c lines to invalid (tv-out has no DDC), we were adding tv connectors to the
polling setup and this was causing blinking on secondary displays.

This fixes the regression Torsten reported.

Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 15:16:44 +10:00
Ben Skeggs
4eb3033c72 drm/nv50: fix iommu errors caused by device reading from address 0
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 11:03:45 +10:00
Dan Carpenter
7504794448 drm/nouveau: off by one in init_i2c_device_find()
dcb->i2c[] has DCB_MAX_NUM_I2C_ENTRIES entries.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 11:03:38 +10:00
Dan Carpenter
55a4c5c515 nouveau: off by one in nv50_gpio_location()
If "gpio->line" is 32 then "nv50_gpio_reg[gpio->line >> 3]" reads past the
end of the array.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 11:03:31 +10:00
Ben Skeggs
6d69630553 drm/nouveau: completely fail init if we fail to map the PRAMIN BAR
On cards where there's a specific BAR for PRAMIN, we used to try and fall
back to the "legacy" aperture within the mmio BAR.

This is doomed to cause problems, so lets just fail completely as there's
obviously something else very wrong anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 11:02:56 +10:00
Ben Skeggs
1eb38100ab drm/nouveau: match U/DP script against SOR link
It appears version 0x21 'U' and 'd' tables require us to take the SOR link
into account when selecting the appropriate table for a particular output.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 11:02:38 +10:00
Rafał Miłecki
f712d0c7e7 drm/radeon/kms/pm: resurrect printing power states
debug only

agd5f: rebased

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:36:15 +10:00
Rafał Miłecki
0fcbe9473a drm/radeon/kms: add trivial debugging for voltage
agd5f: rebased

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:36:09 +10:00
Rafał Miłecki
a081a9d6f5 drm/radeon/kms/r600+: use voltage from requested clock mode (v3)
This fixes FDO bug #28375, it's kind of regression, so quite important to have
it for .35.

V2: Fix on RV770+ as well. All other chipsets have only one clock mode per
state.

V3: I'm out of luck today. Grepped for voltage in r*.c and missed evergreen.

agd5f: rebased

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:36:03 +10:00
Alex Deucher
4d60173fc1 drm/radeon/kms/pm: track current voltage (v2)
track the current voltage level and avoid setting it
if the requested voltage is already set.

v2: check voltage type before checking current voltage

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:53 +10:00
Alex Deucher
aa1df0f229 drm/radeon/kms/pm: Disable voltage adjust on RS780/RS880
The vddc value in the power tables is not an actual voltage
like on discrete r6xx/r7xx/evergreen systems, but instead has
a symbolic meaning (e.g., NONE, LOW, HIGH, etc.).  See atombios.h

Most RS780/RS880 vbioses don't have a SetVoltage table anyway,
so it shouldn't be doing anything to the hardware at the moment.

I need to figure out how voltage is supposed to work on the newer
IGPs; until then, disable it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:44 +10:00
Alex Deucher
cbd4623d4d drm/radeon/kms: fix typo in printing the HPD info
I forgot to fix this in 8e36ed0084

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:27 +10:00
Alex Deucher
c9e75b2125 drm/radeon/kms/pm: add mid profile
This adds an additional profile, mid, to the pm profile
code which takes the place of the old low profile.  The default
behavior remains the same, e.g., auto profile now selects between
mid and high profiles based on power source, however, you can now
manually force the low profile which was previously only available
as a dpms off state.  Enabling the low profile when the displays
are on has been known to cause display corruption in some cases.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:19 +10:00
Alex Deucher
f8ed8b4c5d drm/radeon/kms/pm: Misc fixes
- don't rest the power state in pm_init()
We already boot up to the default power state.  Note this
patch relies on:
drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
To make sure the default power state matches the boot up state.

- In the pm resume path asic init will have set the power state
back to the default so reset the tracking state values.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:13 +10:00
Alex Deucher
8de016e2bd drm/radeon/kms/combios: fix typo in voltage fix
Noticed by Rafał Miłecki.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:35:06 +10:00
Alex Deucher
148a03bc0b drm/radeon/kms/evergreen: set accel_enabled
This is needed to enable accel in the ddx.  However,
due to a bug in older versions of the ddx, it relies
on accel being disabled in order to load properly on
evergreen chips.  To maintain compatility, we add a new
get accel param and call that from the ddx.  The old one
always returns false for evergreen cards.

[this fixes a regression with older userspaces on newer kernels].

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:34:42 +10:00
Dan Carpenter
9b8eb4d147 drm/vmwgfx: return -EFAULT for copy_to_user errors
copy_to/from_user() returns the number of bytes remaining to be copied
but we want to return a negative error code here.  This gets returned to
userspace.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:33:41 +10:00
Dan Carpenter
e902a358c7 drm/drm_crtc: return -EFAULT on copy_to_user errors
copy_from_user() returns the number of bytes left to be copied but we
want to return a negative error code here.  This is in the ioctl handler
so the error code get returned to userspace.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:33:35 +10:00
Dave Airlie
fc2362afd5 drm/fb: use printk to print out the switching to text mode error.
using DRM_ERROR, results in people blaming the drm code for the oops, and
not looking at the oops.

(sadly yes I've gotten reports).

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:33:27 +10:00
Dave Airlie
9bad145ee2 drm/radeon: fix PM on non-vram cards.
PM attemps to unmap objects that aren't actually mapped into userspace ever,
so just don't bother unmapping them at this point, since all you are doing
is nothing. We should be making sure all access to these objects are locked in
kernel space instead. In theory the VRAM gart table is already done, and both
the shaders and stolen vga memory blocks are never accessed at runtime.

fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16127

Reported-by: Jure Repnic <jlp.bugs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:33:16 +10:00
Chris Wilson
5a79395b27 drm: Propagate error from drm_fb_helper_init().
The previous commit fixes the problem, these commits make sure we actually
fail properly if it happens again.

I've squashed the commits from Chris since they are all fixing one issue.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:32:02 +10:00
Dave Airlie
a3524f1b27 drm/i915: fix oops on single crtc devices.
(regression fix since fbdev/kms rework).

My fb rework didn't remember about the 84/65s.

Reported-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:31:16 +10:00
Chris Wilson
e7b526bb85 drm/i915: Move non-phys cursors into the GTT
Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b21
  https://bugs.freedesktop.org/show_bug.cgi?id=28335

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-05 20:37:37 -07:00
Linus Torvalds
1067b6c2be Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (41 commits)
  drm/radeon/kms: make sure display hw is disabled when suspending
  drm/vmwgfx: Allow userspace to change default layout. Bump minor.
  drm/vmwgfx: Fix framebuffer modesetting
  drm/vmwgfx: Fix vga save / restore with display topology.
  vgaarb: use MIT license
  vgaarb: convert pr_devel() to pr_debug()
  drm: fix typos in Linux DRM Developer's Guide
  drm/radeon/kms/pm: voltage fixes
  drm/radeon/kms/pm: radeon_set_power_state fixes
  drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
  drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
  drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
  drm/radeon/kms/evergreen: add initial CS parser
  drm/kms: disable/enable poll around switcheroo on/off
  drm/nouveau: fixup confusion over which handle the DSM is hanging off.
  drm/nouveau: attempt to get bios from ACPI v3
  drm/nv50: cast IGP memory location to u64 before shifting
  drm/ttm: Fix ttm_page_alloc.c
  drm/ttm: Fix cached TTM page allocation.
  drm/vmwgfx: Remove some leftover debug messages.
  ...
2010-06-03 07:19:45 -07:00
Alex Deucher
d8dcaa1dc5 drm/radeon/kms: make sure display hw is disabled when suspending
Disable the display hw when suspending.
Should fix bug:
https://bugzilla.redhat.com/show_bug.cgi?id=522393

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:37 +10:00
Jakob Bornecrantz
d8bd19d2af drm/vmwgfx: Allow userspace to change default layout. Bump minor.
The host may change the layout and, since the change is
communicated to the master, the master needs a way to
communicate the change to the kernel driver.

The minor version number is bumped to advertize the
availability of this feature.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:36 +10:00
Jakob Bornecrantz
991b7b44f8 drm/vmwgfx: Fix framebuffer modesetting
Must set SVGA_NUM_REG_GUEST_DISPLAY before setting up the display information.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:36 +10:00
Thomas Hellstrom
7c4f77801f drm/vmwgfx: Fix vga save / restore with display topology.
vga save / restore previously didn't handle the display topology case.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:35 +10:00
Tiago Vignatti
c0db9cbc73 vgaarb: use MIT license
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Cc: Henry Zhao <Henry.Zhao@Sun.COM>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:34 +10:00
Tiago Vignatti
2d6e9b9197 vgaarb: convert pr_devel() to pr_debug()
We want to be able to use CONFIG_DYNAMIC_DEBUG in arbiter code, switch
the few existing pr_devel() calls to pr_debug().

Also, add one more debug information regarding decoding count.

Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:33 +10:00
Alex Deucher
84d88f4c92 drm/radeon/kms/pm: voltage fixes
- Enable GPIO voltage for non pm modes as well so resetting
the default voltage works.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:31 +10:00
Alex Deucher
92645879d0 drm/radeon/kms/pm: radeon_set_power_state fixes
- wait for vbl for both profile and dynpm
- unify profile and dynpm code paths more
- call pm_misc before of after clocks to make
sure voltage is changed in the proper order.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:30 +10:00
Alex Deucher
c5e8ce61d6 drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
The default power state does not always match the default clocks and voltage
for a particular card.  The information in the firmware info table is correct
and should be used in preference to the info the default power state.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:29 +10:00
Alex Deucher
9349d5cc92 drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
I missed these in the r6xx commit.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:28 +10:00
Alex Deucher
7ac9aa5a1f drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
- This enables voltage adjustment on r6xx+ and certain
r5xx asics.
- Voltage drop support is already available for most
r1xx-r5xx asics.

V2: endian fix for voltage table.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03 13:13:24 +10:00
Linus Torvalds
709d015bb8 Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (41 commits)
  drm/i915: add HAS_BSD check to i915_getparam
  drm/i915: Honor sync polarity from VBT panel timing descriptors
  drm/i915: Unmask interrupt for render engine on Sandybridge
  drm/i915: Fix PIPE_CONTROL command on Sandybridge
  drm/i915: Fix up address spaces in slow_kernel_write()
  drm/i915: Use non-atomic kmap for slow copy paths
  drm/i915: Avoid moving from CPU domain during pwrite
  drm/i915: Cleanup after failed initialization of ringbuffers
  drm/i915: Reject bind_to_gtt() early if object > aperture
  drm/i915: Check error code whilst moving buffer to GTT domain.
  drm/i915: Remove spurious warning "Failure to install fence"
  drm/i915: Rebind bo if currently bound with incorrect alignment.
  drm/i915: Include pitch in set_base debug statement.
  drm/i915: Only print "nothing to do" debug message as required.
  drm/i915: Propagate error from unbinding an unfenceable object.
  drm/i915: Avoid nesting of domain changes when setting display plane
  drm/i915: Hold the spinlock whilst resetting unpin_work along error path
  drm/i915: Only print an message if there was an error
  drm/i915: Clean up leftover bits from hws move to ring structure.
  drm/i915: Add CxSR support on Pineview DDR3
  ...
2010-06-01 14:12:27 -07:00
Zou Nan hai
e3a815fcd3 drm/i915: add HAS_BSD check to i915_getparam
This will let userland only try to use the new media decode
functionality when the appropriate kernel is present.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-06-01 11:21:09 -07:00
Adam Jackson
9bc354998f drm/i915: Honor sync polarity from VBT panel timing descriptors
I'm actually kind of shocked that it works at all otherwise.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-06-01 10:19:37 -07:00
Alex Deucher
cb5fcbd540 drm/radeon/kms/evergreen: add initial CS parser
Advanced validation is not implemented yet.
The mesa code that uses this will be released soon.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 11:46:04 +10:00
Dave Airlie
36d1701c50 Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-testing
* 'nouveau/for-airlied' of ../drm-nouveau-next:
  drm/nv50: cast IGP memory location to u64 before shifting
  drm/nv50: use alternate source of SOR_MODE_CTRL for DP hack
  drm/nouveau: fix dual-link displays when plugged into single-link outputs
  drm/nv50: obey dcb->duallink_possible
  drm/nv50: fix duallink_possible calculation for DCB 4.0 cards
  drm/nouveau: don't execute INIT_GPIO unless we're really running the table
  drm/nv40: allow cold-booting of nv4x chipsets
  drm/nouveau: fix POST detection for certain chipsets
  drm/nouveau: Add getparam for current PTIMER time.
  drm/nouveau: allow cursor image and position to survive suspend
2010-06-01 11:32:29 +10:00
Dave Airlie
afa3b60c90 Merge branch 'drm-switcheroo-fixes' into drm-testing
* drm-switcheroo-fixes:
  drm/kms: disable/enable poll around switcheroo on/off
  drm/nouveau: fixup confusion over which handle the DSM is hanging off.
  drm/nouveau: attempt to get bios from ACPI v3
2010-06-01 11:32:06 +10:00
Dave Airlie
c09a350285 Merge branch 'drm-vmware-fixes' into drm-testing
* drm-vmware-fixes:
  drm/vmwgfx: Remove some leftover debug messages.
  drm/vmwgfx: Print warnings in kernel log about bo pinning that fails.
  drm/vmwgfx: Unpause overlay on update.
  drm/vmwgfx: Some modesetting cleanups and fixes.
  drm/vmwgfx: Don't use SVGA_REG_ENABLE in modesetting code.
  drm/vmwgfx: Remove duplicate member from struct vmw_legacy_display_unit.
  drm/vmwgfx: Reserve first part of VRAM for framebuffer.
  drm/vmwgfx: Support older hardware.
  drm/vmwgfx: Get connector status from detection function.
  drm/vmwgfx: Add kernel throttling support. Bump minor.
  drm/vmwgfx: Make sure to unpin old and pin new framebuffer.
  drm/vmwgfx: Fix single framebuffer detection.
  drm/vmwgfx: Assume larger framebuffer max size.
2010-06-01 11:32:06 +10:00
Dave Airlie
fbf81762e3 drm/kms: disable/enable poll around switcheroo on/off
Because we aren't in a suspend state the poll will still run when we have switcherooed a card off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:36:02 +10:00
Dave Airlie
fc5ea29d72 drm/nouveau: fixup confusion over which handle the DSM is hanging off.
This fixes the DSM setup correctly since vga switcheroo.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:24:30 +10:00
Dave Airlie
afeb3e1114 drm/nouveau: attempt to get bios from ACPI v3
Some of the laptops with the switchable graphics, seem to not post the secondary GPU at all, and we can't find a copy of the BIOS anywhere except in the ACPI rom retrieval.

This adds support for ACPI ROM retrieval to nouveau.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:24:21 +10:00
Ben Skeggs
8b281db596 drm/nv50: cast IGP memory location to u64 before shifting
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-06-01 09:49:12 +10:00
Thomas Hellstrom
4abe438979 drm/ttm: Fix ttm_page_alloc.c
Fix a number of typos misspellings and checkpatch.pl warnings.
Replace "[ttm] " with TTM_PFX

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 09:39:49 +10:00
Thomas Hellstrom
e8613c0e29 drm/ttm: Fix cached TTM page allocation.
This patch fixes a regression introduced with the pool page allocator
in the event that there are no highmem pages (for example x86_64),
in which case cached page allocation would fail.

Tested with the vmwgfx driver on a 64-bit vm.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 09:39:48 +10:00