Commit graph

1001 commits

Author SHA1 Message Date
Russell King
e98ff0f55a ARM: smp_on_up: allow non-ARM SMP processors
Allow non-ARM SMP processors to use the SMP_ON_UP feature.  CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check.  Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.

Cc: <stable@kernel.org>
Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31 21:48:53 +00:00
Russell King
03399c1cb4 ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode
Ensure that the twd timer reload value is reprogrammed each time we
enter periodic mode.  This ensures that the reload value is always
reset correctly.

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-25 21:17:58 +00:00
Linus Torvalds
16c1020362 Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits)
  ARM: pxa: fix building issue of missing physmap.h
  ARM: mmp: PXA910 drive strength FAST using wrong value
  ARM: mmp: MMP2 drive strength FAST using wrong value
  ARM: pxa: fix recursive calls in pxa_low_gpio_chip
  AT91: Support for gsia18s board
  AT91: Acme Systems FOX Board G20 board files
  AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h
  ARM: pxa: fix suspend/resume array index miscalculation
  ARM: pxa: use cpu_has_ipr() consistently in irq.c
  ARM: pxa: remove unused variable in clock-pxa3xx.c
  ARM: pxa: fix warning in zeus.c
  ARM: sa1111: fix typo in sa1111_retrigger_lowirq()
  ARM mxs: clkdev related compile fixes
  ARM i.MX mx31_3ds: Fix MC13783 regulator names
  ARM: plat-stmp3xxx: irq_data conversion.
  ARM: plat-spear: irq_data conversion.
  ARM: plat-orion: irq_data conversion.
  ARM: plat-omap: irq_data conversion.
  ARM: plat-nomadik: irq_data conversion.
  ARM: plat-mxc: irq_data conversion.
  ...

Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert
Buytenhek's irq_data conversion clashing with some omap irq updates)
2011-01-15 12:33:40 -08:00
Linus Torvalds
65e5d002b5 Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix missing branch in __error_a
  ARM: fix /proc/$PID/stack on SMP
  ARM: Fix build regression on SA11x0, PXA, and H720x targets
  ARM: 6625/1: use memblock memory regions for "System RAM" I/O resources
  ARM: fix wrongly patched constants
  ARM: 6624/1: fix dependency for CONFIG_SMP_ON_UP
  ARM: 6623/1: Thumb-2: Fix out-of-range offset for Thumb-2 in proc-v7.S
  ARM: 6622/1: fix dma_unmap_sg() documentation
  ARM: 6621/1: bitops: remove condition code clobber for CLZ
  ARM: 6620/1: Change misleading warning when CONFIG_CMDLINE_FORCE is used
  ARM: 6619/1: nommu: avoid mapping vectors page when !CONFIG_MMU
  ARM: sched_clock: make minsec argument to clocks_calc_mult_shift() zero
  ARM: sched_clock: allow init_sched_clock() to be called early
  ARM: integrator: fix compile warning in cpu.c
  ARM: 6616/1: Fix ep93xx-fb init/exit annotations
  ARM: twd: fix display of twd frequency
  ARM: udelay: prevent math rounding resulting in short udelays
2011-01-15 12:29:50 -08:00
Russell King
cb4d3eaebb ARM: fix missing branch in __error_a
When DEBUG_LL is not set, we don't want __error_a re-entering
__lookup_machine_type - we want it to go to the error function.  This
used to be the case before we reorganized the layout for hotplug cpu,
as we used to fall through to __error.  With the changed layout, we
need an explicit branch here instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-15 11:19:19 +00:00
Russell King
d5996b2ff0 ARM: fix /proc/$PID/stack on SMP
Rabin Vincent reports:
| On SMP, this BUG() in save_stack_trace_tsk() can be easily triggered
| from user space by reading /proc/$PID/stack, where $PID is any pid but
| the current process:
|
|	if (tsk != current) {
| #ifdef CONFIG_SMP
|		/*
|		 * What guarantees do we have here that 'tsk'
|		 * is not running on another CPU?
|		 */
|		BUG();
| #else

Fix this by replacing the BUG() with an entry to terminate the stack
trace, returning an empty trace - I'd rather not expose the dwarf
unwinder to a volatile stack of a running thread.

Reported-by: Rabin Vincent <rabin@rab.in>
Tested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-15 09:27:04 +00:00
Dima Zavin
11b9369cbb ARM: 6625/1: use memblock memory regions for "System RAM" I/O resources
Do not use memory bank info to request the "system ram" resources as
they do not track holes created by memblock_remove inside
machine's reserve callback. If the removed memory is passed as
platform_device's ioresource, then drivers that call
request_mem_region would fail due to a conflict with the incorrectly
configured system ram resource.

Instead, iterate through the regions of memblock.memory and add
those as "System RAM" resources.

Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-14 22:14:04 +00:00
David Rientjes
d0a21265df mm: unify module_alloc code for vmalloc
Four architectures (arm, mips, sparc, x86) use __vmalloc_area() for
module_init().  Much of the code is duplicated and can be generalized in a
globally accessible function, __vmalloc_node_range().

__vmalloc_node() now calls into __vmalloc_node_range() with a range of
[VMALLOC_START, VMALLOC_END) for functionally equivalent behavior.

Each architecture may then use __vmalloc_node_range() directly to remove
the duplication of code.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:34 -08:00
Lennert Buytenhek
4a87bac4c9 ARM: ecard: irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13 12:26:17 +01:00
Lennert Buytenhek
f64305a68b ARM: core irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13 12:26:17 +01:00
Alexander Holler
22eeb8f6e0 ARM: 6620/1: Change misleading warning when CONFIG_CMDLINE_FORCE is used
When CONFIG_CMDLINE_FORCE is used, the warning

  Ignoring unrecognised tag 0x54410009

was displayed. Change this to

  Ignoring tag cmdline (using the default kernel command line)

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-12 14:22:25 +00:00
Will Deacon
6cde6d4217 ARM: 6619/1: nommu: avoid mapping vectors page when !CONFIG_MMU
When running without an MMU, we do not need to install a mapping for the
vectors page. Attempting to do so causes a compile-time error because
install_special_mapping is not defined.

This patch adds compile-time guards to the vector mapping functions
so that we can build nommu configurations once more.

Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11 17:32:24 +00:00
Russell King
edc4d27255 ARM: sched_clock: make minsec argument to clocks_calc_mult_shift() zero
The purpose of the minsec argument is to prevent 64-bit math overflow
when the number of cycles is multiplied up.  However, the multipler
is 32-bit, and in the sched_clock() case, the cycle counter is up to
32-bit as well.  So the math can never overflow.

With a value of 60, and clock rates greater than 71MHz, the calculated
multiplier is unnecessarily reduced in value, which reduces accuracy by
maybe 70ppt.  It's almost not worth bothering with as the oscillator
driving the counter won't be any more than 1ppm - unless you're using
a rubidium lamp or caesium fountain frequency standard.

So, set the minsec argument to zero.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11 16:44:02 +00:00
Russell King
211baa7016 ARM: sched_clock: allow init_sched_clock() to be called early
sched_clock is supposed to be initialized early - in the recently added
init_early platform hook.  However, in doing so we end up calling
mod_timer() before the timer lists are initialized, resulting in an
oops.

Split the initialization in two - the part which the platform calls
early which starts things off.  The addition of the timer can be
delayed until after we have more of the kernel initialized - when the
normal time sources are initialized.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11 16:23:04 +00:00
Russell King
6426d2c2f0 ARM: twd: fix display of twd frequency
The fraction of MHz was not being displayed correctly as the calculation
was a factor of 10 out.  Fix this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11 12:11:01 +00:00
Linus Torvalds
3c0cb7c31c Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
  ARM: DMA: add support for DMA debugging
  ARM: PL011: add DMA burst threshold support for ST variants
  ARM: PL011: Add support for transmit DMA
  ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
  ARM: PL011: Separate hardware FIFO size from TTY FIFO size
  ARM: PL011: Allow better handling of vendor data
  ARM: PL011: Ensure error flags are clear at startup
  ARM: PL011: include revision number in boot-time port printk
  ARM: vexpress: add sched_clock() for Versatile Express
  ARM i.MX53: Make MX53 EVK bootable
  ARM i.MX53: Some bug fix about MX53 MSL code
  ARM: 6607/1: sa1100: Update platform device registration
  ARM: 6606/1: sa1100: Fix platform device registration
  ARM i.MX51: rename IPU irqs
  ARM i.MX51: Add ipu clock support
  ARM: imx/mx27_3ds: Add PMIC support
  ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
  mx51: fix usb clock support
  MX51: Add support for usb host 2
  arch/arm/plat-mxc/ehci.c: fix errors/typos
  ...
2011-01-06 16:50:35 -08:00
Russell King
404a02cbd2 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h
2011-01-06 22:33:32 +00:00
Russell King
28cdac6690 Merge branch 'pgt' (early part) into devel 2011-01-06 22:33:19 +00:00
Russell King
4073723acb Merge branch 'misc' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/common/Makefile
	arch/arm/kernel/Makefile
	arch/arm/kernel/smp.c
2011-01-06 22:32:52 +00:00
Russell King
4ec3eb1363 Merge branch 'smp' into misc
Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/mm/ioremap.c
2011-01-06 22:32:03 +00:00
Russell King
58daf18cdc Merge branch 'clksrc' into devel
Conflicts:
	arch/arm/mach-vexpress/v2m.c
	arch/arm/plat-omap/counter_32k.c
	arch/arm/plat-versatile/Makefile
2011-01-05 18:09:03 +00:00
Russell King
31edf274f9 Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and 'versatile' into devel 2011-01-05 18:08:10 +00:00
Ingo Molnar
aef1b9cef7 Merge commit 'v2.6.37' into perf/core
Merge reason: Add the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:22:10 +01:00
Russell King
dec12e62c0 ARM: provide an early platform initialization hook
This allows platforms to hook into the initialization early to setup
things like scheduler clocks, etc.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24 09:49:52 +00:00
Russell King
8ff1443c54 ARM: simplify early machine init hooks
Rather than storing each machine init hook separately, store a
pointer to the machine description record and dereference this
instead.  This pointer is only available while the init sections
are present, which is not a problem as we only use it from init
code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24 09:49:51 +00:00
Magnus Damm
cd544ce754 ARM: 6538/1: Subarch IRQ handler macros V3
Per subarch interrupt handler macros V3.

This patch breaks out code from the irq_handler macro
into arch_irq_handler and arch_irq_handler_default.

The macros are put in the header file "entry-macro-multi.S"

The arch_irq_handler_default macro is designed to be
used by irq_handler in entry-armv.S while arch_irq_handler
is suitable for per-subarch use.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24 09:47:36 +00:00
eric miao
521086412e ARM: 6532/1: Allow machine to specify it's own IRQ handlers at run-time
Normally different ARM platform has different way to decode the IRQ
hardware status and demultiplex to the corresponding IRQ handler.
This is highly optimized by macro irq_handler in entry-armv.S, and
each machine defines their own macro to decode the IRQ number.
However, this prevents multiple machine classes to be built into a
single kernel.

By allowing each machine to specify thier own handler, and making
function pointer 'handle_arch_irq' to point to it at run time, this
can be solved. And introduce CONFIG_MULTI_IRQ_HANDLER to allow both
solutions to work.

Comparing with the highly optimized macro of irq_handler, the new
function must be written with care not to lose too much performance.
And the IPI stuff on SMP is expected to move to the provided arch
IRQ handler as well.

The assembly code to invoke handle_arch_irq is optimized by Russell
King.

Signed-off-by: Eric Miao <eric.miao@canonical.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24 09:47:34 +00:00
Todd Android Poynor
d13e5edd72 ARM: 6540/1: Stop irqsoff trace on return to user
If the irqsoff tracer is in use, stop tracing the interrupt disable
interval when returning to userspace.  Tracing userspace execution time
as interrupts disabled time is not helpful for kernel performance
analysis purposes.  Only do so if the irqsoff tracer is enabled, to
avoid overhead for lockdep, which doesn't care.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24 09:37:59 +00:00
Russell King
25cf0398bd Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable 2010-12-22 22:46:24 +00:00
Russell King
112f38a4a3 ARM: sched_clock: provide common infrastructure for sched_clock()
Provide common sched_clock() infrastructure for platforms to use to
create a 64-bit ns based sched_clock() implementation from a counter
running at a non-variable clock rate.

This implementation is based upon maintaining an epoch for the counter
and an epoch for the nanosecond time.  When we desire a sched_clock()
time, we calculate the number of counter ticks since the last epoch
update, convert this to nanoseconds and add to the epoch nanoseconds.

We regularly refresh these epochs within the counter wrap interval.
We perform a similar calculation as above, and store the new epochs.

We read and write the epochs in such a way that sched_clock() can easily
(and locklessly) detect when an update is in progress, and repeat the
loading of these constants when they're known not to be stable.  The
one caveat is that sched_clock() is not called in the middle of an
update.  We achieve that by disabling IRQs.

Finally, if the clock rate is known at compile time, the counter to ns
conversion factors can be specified, allowing sched_clock() to be tightly
optimized.  We ensure that these factors are correct by providing an
initialization function which performs a run-time check.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Eric Miao <eric.y.miao@gmail.com>
Tested-by: Olof Johansson <olof@lixom.net>
Tested-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:43 +00:00
Russell King
614dd0585f ARM: pgtable: collect up identity mapping functions
We have two places where we create identity mappings - one when we bring
secondary CPUs online, and one where we setup some mappings for soft-
reboot.  Combine these two into a single implementation.  Also collect
the identity mapping deletion function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:33 +00:00
Russell King
26bbf0b57a ARM: pgtable: remove L2 cache flushes for SMP page table bring-up
The MMU is always configured to read page tables from the L2 cache
so there's little point flushing them out of the L2 cache back to
RAM.  Remove these flushes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:33 +00:00
Russell King
faabfa0816 ARM: SMP: ensure frame pointer is reinitialized for soft-CPU hotplug
When we soft-CPU hotplug a CPU, we reset the stack pointer and
jump back to start_secondary().  This allows us to restart as if
the CPU was actually reset.

However, we weren't resetting the frame pointer, which could cause
problems with backtracing.  Reset the frame pointer to zero (which
means no parent frame) just like the early assembly code also does.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 16:58:19 +00:00
Russell King
03b505eae6 ARM: SMP: split out software TLB maintainence broadcasting
smp.c is becoming too large, so split out the TLB maintainence
broadcasting into a separate smp_tlb.c file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:17 +00:00
Russell King
10034aabca ARM: localtimer: clean up local timer on hot unplug
When a CPU is hot unplugged, the generic tick code cleans up the
clock event device, but fails to call down to the device's set_mode
function to actually shut the device down.

To work around this, we've historically had a local_timer_stop()
callback out of the hotplug code.  However, this adds needless
complexity when we have the clock event device itself available.

Explicitly call the clock event device's set_mode function with
CLOCK_EVT_MODE_UNUSED, so that the hardware can be cleanly shutdown
without any special external callbacks.  When/if the generic code
is fixed, percpu_timer_stop() can be killed off.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:16 +00:00
Russell King
58613cd1d4 ARM: smp: improve CPU bringup failure diagnostics
We used to print a bland error message which gave no clue as to the
failure when we failed to bring up a secondary CPU.  Resolve this by
separating the two failure cases.

If boot_secondary() fails, we print a message indicating the returned
error code from boot_secondary():
	"CPU%u: failed to boot: %d\n", cpu, ret.

However, if boot_secondary() succeeded, but the CPU did not appear to
mark itself online within the timeout, indicate that it failed to come
online:
	"CPU%u: failed to come online\n", cpu

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:14 +00:00
Dave Martin
ed3768a8d9 ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels.
* __fixup_smp_on_up has been modified with support for the
    THUMB2_KERNEL case.  For THUMB2_KERNEL only, fixups are split
    into halfwords in case of misalignment, since we can't rely on
    unaligned accesses working before turning the MMU on.

    No attempt is made to optimise the aligned case, since the
    number of fixups is typically small, and it seems best to keep
    the code as simple as possible.

  * Add a rotate in the fixup_smp code in order to support
    CPU_BIG_ENDIAN, as suggested by Nicolas Pitre.

  * Add an assembly-time sanity-check to ALT_UP() to ensure that
    the content really is the right size (4 bytes).

    (No check is done for ALT_SMP().  Possibly, this could be fixed
    by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus
    ALT_SMP...SMP_UP_B) into two macros.  In the first case,
    ALT_SMP needs to expand to >= 4 bytes, not == 4.)

  * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due
    to macro limitations) has not been modified: the affected
    instruction (mov) has no 16-bit encoding, so the correct
    instruction size is satisfied in this case.

  * A "mode" parameter has been added to smp_dmb:

    smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser)
    smp_dmb     @ uses W() to ensure 4-byte instructions for ALT_SMP()

    This avoids assembly failures due to use of W() inside smp_dmb,
    when assembling pure-ARM code in the vectors page.

    There might be a better way to achieve this.

  * Kconfig: make SMP_ON_UP depend on
    (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now
    supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2
    currently assumes little-endian order.)

Tested using a single generic realview kernel on:
	ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y})
	ARM RealView PBX-A9 (SMP)

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:12 +00:00
Russell King
f36d340122 ARM: CPU hotplug: ensure correct ordering of unplug
Don't call idle_task_exit() with interrupts disabled, and ensure
that we have a memory barrier after interrupts are disabled but
before signalling that this CPU has shut down.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:11 +00:00
Russell King
3c030beabf ARM: CPU hotplug: move cpu_killed completion to core code
We always need to wait for the dying CPU to reach a safe state before
taking it down, irrespective of the requirements of the platform.
Move the completion code into the ARM SMP hotplug code rather than
having each platform re-implement this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:10 +00:00
Russell King
2c0136dba4 ARM: SMP: consolidate trace_hardirqs_off() into common SMP code
All platforms call trace_hardirqs_off() in their secondary startup code,
so move this into the core SMP code - it doesn't need to be in the
per-platform code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:09 +00:00
Russell King
05c74a6cbc ARM: SMP: consolidate the common parts of smp_prepare_cpus()
There is a certain amount of smp_prepare_cpus() which doesn't belong
in the platform support code - that is, code which is invariant to the
SMP implementation.  Move this code into arch/arm/kernel/smp.c, and
add a platform_ prefix to the original function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:08 +00:00
Russell King
28e18293cf ARM: SMP: ensure smp_send_stop() waits for CPUs to stop
Wait for CPUs to indicate that they've stopped, after sending the
stop IPI, rather than blindly continuing on and hoping that they've
stopped in time.  Print a warning if we fail to stop the other CPUs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:26 +00:00
Russell King
0eb0511d17 ARM: SMP: use more sane register allocation for __fixup_smp_on_up
Use r0,r3-r6 rather than r0,r3,r4,r6,r7, which makes it easier to
understand which registers can be modified.  Also document which
registers hold values which must be preserved.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:02 +00:00
Russell King
b54992fe1b ARM: SMP: collect IPI and local timer IRQs for /proc/stat
The IPI and local timer interrupts weren't being properly accounted
for in /proc/stat.  Collect them from the irq_stat structure, and
return their sum.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:01 +00:00
Russell King
4a88abd7b4 ARM: SMP: provide individual IPI interrupt statistics
This separates out the individual IPI interrupt counts from the
total IPI count, which allows better visibility of what IPIs are
being used for.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:01 +00:00
Haojian Zhuang
ef6c84454f ARM: pxa: add iwmmx support for PJ4
iwmmxt is used in XScale, XScale3, Mohawk and PJ4 core. But the instructions
of accessing CP0 and CP1 is changed in PJ4. Append more files to support
iwmmxt in PJ4 core.

Signed-off-by: Zhou Zhu <zzhu3@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:07:36 +08:00
Russell King
f13cd4170e ARM: fix /proc/interrupts formatting
As per x86, align the initial column according to how many IRQs we
have.  Also, provide an english explaination for the 'LOC:' and
'IPI:' lines.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:07:32 +00:00
Russell King
cab8c6f305 ARM: SMP: move ipi_count into irq_stat structure
Move the ipi_count into irq_stat, which allows the ipi_data structure
to be entirely removed.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:06:58 +00:00
Russell King
46c48f222f ARM: SMP: provide accessors for irq_stat data
Provide __inc_irq_stat() and __get_irq_stat() to increment and
read the irq stat counters.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:06:58 +00:00
Russell King
ec405ea9fe ARM: include local timer irq stats only when local timers configured
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:06:57 +00:00