Commit graph

92 commits

Author SHA1 Message Date
Martin K. Petersen
a91a2785b2 block: Require subsystems to explicitly allocate bio_set integrity mempool
MD and DM create a new bio_set for every metadevice. Each bio_set has an
integrity mempool attached regardless of whether the metadevice is
capable of passing integrity metadata. This is a waste of memory.

Instead we defer the allocation decision to MD and DM since we know at
metadevice creation time whether integrity passthrough is needed or not.

Automatic integrity mempool allocation can then be removed from
bioset_create() and we make an explicit integrity allocation for the
fs_bio_set.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Acked-by: Mike Snitzer <snizer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17 11:11:05 +01:00
Jens Axboe
4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
NeilBrown
da9cf5050a md: avoid spinlock problem in blk_throtl_exit
blk_throtl_exit assumes that ->queue_lock still exists,
so make sure that it does.
To do this, we stop redirecting ->queue_lock to conf->device_lock
and leave it pointing where it is initialised - __queue_lock.

As the blk_plug functions check the ->queue_lock is held, we now
take that spin_lock explicitly around the plug functions.  We don't
need the locking, just the warning removal.

This is needed for any kernel with the blk_throtl code, which is
which is 2.6.37 and later.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-21 18:25:57 +11:00
Krzysztof Wojcik
f7bee80945 md: Fix raid1->raid0 takeover
Takeover raid1->raid0 not succeded. Kernel message is shown:
"md/raid0:md126: too few disks (1 of 2) - aborting!"

Problem was that we weren't updating ->raid_disks for that
takeover, unlike all the others.

Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-14 10:01:41 +11:00
Krzysztof Wojcik
fc3a08b85b Add raid1->raid0 takeover support
This patch introduces raid 1 to raid0 takeover operation
in kernel space.

Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 13:47:13 +11:00
Tejun Heo
e9c7469bb4 md: implment REQ_FLUSH/FUA support
This patch converts md to support REQ_FLUSH/FUA instead of now
deprecated REQ_HARDBARRIER.  In the core part (md.c), the following
changes are notable.

* Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with
  processing of other requests and thus there is no reason to mark the
  queue congested while FLUSH/FUA is in progress.

* REQ_FLUSH/FUA failures are final and its users don't need retry
  logic.  Retry logic is removed.

* Preflush needs to be issued to all member devices but FUA writes can
  be handled the same way as other writes - their processing can be
  deferred to request_queue of member devices.  md_barrier_request()
  is renamed to md_flush_request() and simplified accordingly.

For linear, raid0 and multipath, the core changes are enough.  raid1,
5 and 10 need the following conversions.

* raid1: Handling of FLUSH/FUA bio's can simply be deferred to
  request_queues of member devices.  Barrier related logic removed.

* raid5: Queue draining logic dropped.  FUA bit is propagated through
  biodrain and stripe resconstruction such that all the updated parts
  of the stripe are written out with FUA writes if any of the dirtying
  writes was FUA.  preread_active_stripes handling in make_request()
  is updated as suggested by Neil Brown.

* raid10: FUA bit needs to be propagated to write clones.

linear, raid0, 1, 5 and 10 tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:38 +02:00
Christoph Hellwig
7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Maciej Trela
049d6c1ef9 md: enable raid4->raid0 takeover
Only level 5 with layout=PARITY_N can be taken over to raid0 now.
Lets allow level 4 either.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:34:57 +10:00
Maciej Trela
001048a318 md: clear layout after ->raid0 takeover
After takeover from raid5/10 -> raid0 mddev->layout is not cleared.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:34:45 +10:00
NeilBrown
e93f68a1fc md: fix handling of array level takeover that re-arranges devices.
Most array level changes leave the list of devices largely unchanged,
possibly causing one at the end to become redundant.
However conversions between RAID0 and RAID10 need to renumber
all devices (except 0).

This renumbering is currently being done in the ->run method when the
new personality takes over.  However this is too late as the common
code in md.c might already have invalidated some of the devices if
they had a ->raid_disk number that appeared to high.

Moving it into the ->takeover method is too early as the array is
still active at that time and wrong ->raid_disk numbers could cause
confusion.

So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate
the new raid_disk number.
Now the common code knows exactly which devices need to be renumbered,
and which can be invalidated, and can do it all at a convenient time
when the array is suspend.
It can also update some symlinks in sysfs which previously were not be
updated correctly.

Reported-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:33:24 +10:00
NeilBrown
19fdb9eefb Merge commit '3ff195b011d7decf501a4d55aeed312731094796' into for-linus
Conflicts:
	drivers/md/md.c

- Resolved conflict in md_update_sb
- Added extra 'NULL' arg to new instance of sysfs_get_dirent.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-22 08:31:36 +10:00
NeilBrown
b5a20961f3 md/raid0: tidy up printk messages.
All messages now start
   md/raid0:md-device-name:

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:59 +10:00
NeilBrown
21a52c6d05 md: pass mddev to make_request functions rather than request_queue
We used to pass the personality make_request function direct
to the block layer so the first argument had to be a queue.
But now we have the intermediary md_make_request so it makes
at lot more sense to pass a struct mddev_s.
It makes it possible to have an mddev without its own queue too.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:55 +10:00
NeilBrown
490773268c md: move io accounting out of personalities into md_make_request
While I generally prefer letting personalities do as much as possible,
given that we have a central md_make_request anyway we may as well use
it to simplify code.
Also this centralises knowledge of ->gendisk which will help later.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:52 +10:00
Trela, Maciej
9af204cf72 md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:48 +10:00
NeilBrown
84707f38e7 md: don't use mddev->raid_disks in raid0 or raid10 while array is active.
In a subsequent patch we will make it possible to change
mddev->raid_disks while a RAID0 or RAID10 array is active.  This is
part of the process of reshaping such an array.

This means that we cannot use this value while processes requests
(it is OK to use it during initialisation as we are locked against
changes then).
Both RAID0 and RAID10 have the same value stored in the private data
structure, so use that value instead.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:47 +10:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
NeilBrown
627a2d3c29 md: deal with merge_bvec_fn in component devices better.
If a component device has a merge_bvec_fn then as we never call it
we must ensure we never need to.  Currently this is done by setting
max_sector to 1 PAGE, however this does not stop a bio being created
with several sub-page iovecs that would violate the merge_bvec_fn.

So instead set max_segments to 1 and set the segment boundary to the
same as a page boundary to ensure there is only ever one single-page
segment of IO requested at a time.

This can particularly be an issue when 'xen' is used as it is
known to submit multiple small buffers in a single bio.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2010-03-16 17:04:24 +11:00
Martin K. Petersen
086fa5ff08 block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors
The block layer calling convention is blk_queue_<limit name>.
blk_queue_max_sectors predates this practice, leading to some confusion.
Rename the function to appropriately reflect that its intended use is to
set max_hw_sectors.

Also introduce a temporary wrapper for backwards compability.  This can
be removed after the merge window is closed.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26 13:58:08 +01:00
NeilBrown
0efb9e6191 md: add MODULE_DESCRIPTION for all md related modules.
Suggested by  Oren Held <orenhe@il.ibm.com>

Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 12:51:41 +11:00
NeilBrown
a2826aa92e md: support barrier requests on all personalities.
Previously barriers were only supported on RAID1.  This is because
other levels requires synchronisation across all devices and so needed
a different approach.
Here is that approach.

When a barrier arrives, we send a zero-length barrier to every active
device.  When that completes - and if the original request was not
empty -  we submit the barrier request itself (with the barrier flag
cleared) and then submit a fresh load of zero length barriers.

The barrier request itself is asynchronous, but any subsequent
request will block until the barrier completes.

The reason for clearing the barrier flag is that a barrier request is
allowed to fail.  If we pass a non-empty barrier through a striping
raid level it is conceivable that part of it could succeed and part
could fail.  That would be way too hard to deal with.
So if the first run of zero length barriers succeed, we assume all is
sufficiently well that we send the request and ignore errors in the
second run of barriers.

RAID5 needs extra care as write requests may not have been submitted
to the underlying devices yet.  So we flush the stripe cache before
proceeding with the barrier.

Note that the second set of zero-length barriers are submitted
immediately after the original request is submitted.  Thus when
a personality finds mddev->barrier to be set during make_request,
it should not return from make_request until the corresponding
per-device request(s) have been queued.

That will be done in later patches.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
NeilBrown
3fa841d7e7 md: report device as congested when suspended
This should writeback from coming when the device is temporarily
suspended.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23 18:10:29 +10:00
NeilBrown
a9f326ebf2 md: remove sparse waring "symbol xxx shadows an earlier one"
Rename some variable and remove some duplicate definitions
to avoid there warnings.  None of them are actual errors.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23 18:06:41 +10:00
Jens Axboe
1f98a13f62 bio: first step in sanitizing the bio->bi_rw flag testing
Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:31 +02:00
Andre Noll
ac5e7113e7 md: Push down data integrity code to personalities.
This patch replaces md_integrity_check() by two new public functions:
md_integrity_register() and md_integrity_add_rdev() which are both
personality-independent.

md_integrity_register() is called from the ->run and ->hot_remove
methods of all personalities that support data integrity.  The
function iterates over the component devices of the array and
determines if all active devices are integrity capable and if their
profiles match. If this is the case, the common profile is registered
for the mddev via blk_integrity_register().

The second new function, md_integrity_add_rdev() is called from the
->hot_add_disk methods, i.e. whenever a new device is being added
to a raid array. If the new device does not support data integrity,
or has a profile different from the one already registered, data
integrity for the mddev is disabled.

For raid0 and linear, only the call to md_integrity_register() from
the ->run method is necessary.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-08-03 10:59:47 +10:00
Martin K. Petersen
8f6c2e4b32 md: Use new topology calls to indicate alignment and I/O sizes
Switch MD over to the new disk_stack_limits() function which checks for
aligment and adjusts preferred I/O sizes when stacking.

Also indicate preferred I/O sizes where applicable.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-07-01 11:13:45 +10:00
Andre Noll
0894cc3066 md: Move check for bitmap presence to personality code.
If the superblock of a component device indicates the presence of a
bitmap but the corresponding raid personality does not support bitmaps
(raid0, linear, multipath, faulty), then something is seriously wrong
and we'd better refuse to run such an array.

Currently, this check is performed while the superblocks are examined,
i.e. before entering personality code. Therefore the generic md layer
must know which raid levels support bitmaps and which do not.

This patch avoids this layer violation without adding identical code
to various personalities. This is accomplished by introducing a new
public function to md.c, md_check_no_bitmap(), which replaces the
hard-coded checks in the superblock loading functions.

A call to md_check_no_bitmap() is added to the ->run method of each
personality which does not support bitmaps and assembly is aborted
if at least one component device contains a bitmap.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:49:23 +10:00
NeilBrown
13f2682b72 md: raid0/linear: ensure device sizes are rounded to chunk size.
This is currently ensured by common code, but it is more reliable to
ensure it where it is needed in personality code.
All the other personalities that care already round the size to
the chunk_size.  raid0 and linear are the only hold-outs.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:48:55 +10:00
NeilBrown
d6e412eaa5 md: raid0: chunk_sectors cleanups.
following the conversion to chunk_sectors, there is room
for cleaning up a little.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:47:00 +10:00
Andre Noll
9d8f036362 md: Make mddev->chunk_size sector-based.
This patch renames the chunk_size field to chunk_sectors with the
implied change of semantics.  Since

	is_power_of_2(chunk_size) = is_power_of_2(chunk_sectors << 9)
				  = is_power_of_2(chunk_sectors)

these bits don't need an adjustment for the shift.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:45:01 +10:00
raz ben yehuda
fbb704efb7 md: raid0 :Enables chunk size other than powers of 2.
Maintain two flows, one for pow2 chunk sizes (which uses masks and
shift), and a flow for the general case (which uses sector_div).
This is for the sake of performance.

 - introduce map_sector and is_io_in_chunk_boundary to encapsulate
   those two flows better for raid0_make_request
 - fix blk_mergeable to support the two flows.

Signed-off-by: raziebe@gmail.com
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 17:02:05 +10:00
raz ben yehuda
92e59b6ba2 md: raid0: chunk size check in raid0_run
have raid0 check chunk size in run method instead of in md.
This is part of a series moving the checks from common code to
the personalities where they belong.

hardsect is short and chunksize is an int, so it is safe to use %.

Signed-off-by: raziebe@gmail.com
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 17:00:57 +10:00
raz ben yehuda
46994191ae md: have raid0 report its formation
Report to the user what are the raid zones

Signed-off-by: raziebe@gmail.com
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 17:00:54 +10:00
raz ben yehuda
1b9614291e md: have raid0 compile with MD_DEBUG on
Because of the removal of the device list from
the strips raid0 did not compile with MD_DEBUG flag on

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:57:40 +10:00
NeilBrown
070ec55d07 md: remove mddev_to_conf "helper" macro
Having a macro just to cast a void* isn't really helpful.
I would must rather see that we are simply de-referencing ->private,
than have to know what the macro does.

So open code the macro everywhere and remove the pointless cast.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:54:21 +10:00
NeilBrown
a6b3deafe0 md: raid0: remove setting of segment boundary.
This setting doesn't seem to make sense (half the chunk size??) and
shouldn't be needed.
The segment boundary exported by raid0 should simply be the minimum
of the segment boundary of all component devices.  And we already
get that right.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:54:07 +10:00
NeilBrown
b414579f45 md: raid0: remove ->dev pointer from strip_zone structure
If we treat conf->devlist more like a 2 dimensional array,
we can get the devlist for a particular zone simply by indexing
that array, so we don't need to store the pointers to subarrays
in strip_zone.  This makes strip_zone smaller and so (hopefully)
searches faster.

Signed-of-by: NeilBrown <neilb@suse.de>
2009-06-16 16:50:52 +10:00
NeilBrown
49f357a22b md: raid0: remove ->sectors from the strip_zone structure.
storing ->sectors is redundant as is can be computed from the
difference  z->zone_end - (z-1)->zone_end

The one place where it is used, it is just as efficient to use
a zone_end value instead.

And removing it makes strip_zone smaller, so they array of these that
is searched on every request has a better chance to say in cache.

So discard the field and get the value from elsewhere.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:50:35 +10:00
Andre Noll
fb5ab4b5d6 md: raid0: Fix a memory leak when stopping a raid0 array.
raid0_stop() removes all references to the raid0 configuration but
misses to free the ->devlist buffer.

This patch closes this leak, removes a pointless initialization and
fixes a coding style issue in raid0_stop().

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:48:19 +10:00
Andre Noll
ed7b00380d md: raid0: Allocate all buffers for the raid0 configuration in one function.
Currently the raid0 configuration is allocated in raid0_run() while
the buffers for the strip_zone and the dev_list arrays are allocated
in create_strip_zones(). On errors, all three buffers are freed
in raid0_run().

It's easier and more readable to do the allocation and cleanup within
a single function. So move that code into create_strip_zones().

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:47:36 +10:00
Andre Noll
5568a6035d md: raid0: Make raid0_run() return a proper error code.
Currently raid0_run() always returns -ENOMEM on errors. This is
incorrect as running the array might fail for other reasons, for
example because not all component devices were available.

This patch changes create_strip_zones() so that it returns a proper
error code (either -ENOMEM or -EINVAL) rather than 1 on errors and
makes raid0_run(), its single caller, return that value instead
of -ENOMEM.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:47:21 +10:00
Andre Noll
8f79cfcdb6 md: raid0: Remove hash spacing and sector shift.
The "sector_shift" and "spacing" fields of struct raid0_private_data
were only used for the hash table lookups. So the removal of the
hash table allows get rid of these fields as well which simplifies
create_strip_zones() and raid0_run() quite a bit.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:47:10 +10:00
Andre Noll
09770e0b6e md: raid0: Remove hash table.
The raid0 hash table has become unused due to the changes in the
previous patch. This patch removes the hash table allocation and
setup code and kills the hash_table field of struct raid0_private_data.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:46:48 +10:00
NeilBrown
d27a43abd7 md/raid0: two cleanups in create_stripe_zones.
1/ remove current_start.  The same value is available in
     zone->dev_start and storing it separately doesn't gain anything.
2/ rename curr_zone_start to curr_zone_end as we are now more
     focused on the 'end' of each zone.  We end up storing the
     same number though - the old name was a little confusing
     (and what does 'current' mean in this context anyway).

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:46:46 +10:00
Andre Noll
dc58266385 md: raid0: Replace hash table lookup by looping over all strip_zones.
The number of strip_zones of a raid0 array is bounded by the number of
drives in the array and is in fact much smaller for typical setups. For
example, any raid0 array containing identical disks will have only
a single strip_zone.

Therefore, the hash tables which are used for quickly finding the
strip_zone that holds a particular sector are of questionable value
and add quite a bit of unnecessary complexity.

This patch replaces the hash table lookup by equivalent code which
simply loops over all strip zones to find the zone that holds the
given sector.

In order to make this loop as fast as possible, the zone->start field
of struct strip_zone has been renamed to zone_end, and it now stores
the beginning of the next zone in sectors. This allows to save one
addition in the loop.

Subsequent cleanup patches will remove the hash table structure.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:18:43 +10:00
Martin K. Petersen
ae03bf639a block: Use accessor functions for queue limits
Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Dan Williams
b522adcde9 md: 'array_size' sysfs attribute
Allow userspace to set the size of the array according to the following
semantics:

1/ size must be <= to the size returned by mddev->pers->size(mddev, 0, 0)
   a) If size is set before the array is running, do_md_run will fail
      if size is greater than the default size
   b) A reshape attempt that reduces the default size to less than the set
      array size should be blocked
2/ once userspace sets the size the kernel will not change it
3/ writing 'default' to this attribute returns control of the size to the
   kernel and reverts to the size reported by the personality

Also, convert locations that need to know the default size from directly
reading ->array_sectors to <pers>_size.  Resync/reshape operations
always follow the default size.

Finally, fixup other locations that read a number of 1k-blocks from
userspace to use strict_blocks_to_sectors() which checks for unsigned
long long to sector_t overflow and blocks to sectors overflow.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31 15:00:31 +11:00
Dan Williams
1f403624bd md: centralize ->array_sectors modifications
Get personalities out of the business of directly modifying
->array_sectors.  Lays groundwork to introduce policy on when
->array_sectors can be modified.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31 14:59:03 +11:00
Dan Williams
80c3a6ce4b md: add 'size' as a personality method
In preparation for giving userspace control over ->array_sectors we need
to be able to retrieve the 'default' size, and the 'anticipated' size
when a reshape is requested.  For personalities that do not reshape emit
a warning if anything but the default size is requested.

In the raid5 case we need to update ->previous_raid_disks to make the
new 'default' size available.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31 14:57:49 +11:00