Commit graph

56 commits

Author SHA1 Message Date
Jeremy Fitzhardinge
26a3e99160 xen: fix scrub_page()
Impact: fix guest kernel crash with CONFIG_XEN_SCRUB_PAGES=y

Jens noticed that scrub_page() has a buggy unmap of the wrong
thing. (virtual address instead of page)

Linus pointed out that the whole scrub_page() code is an unnecessary
reimplementation of clear_highpage() to begin with.

Just use clear_highpage() rather than reimplementing it poorly.

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-17 19:11:26 +01:00
Jianjun Kong
54074d5932 drivers: remove duplicated #include
Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-04 08:18:19 -08:00
Isaku Yamahata
ff3c536291 xen: compilation fix of drivers/xen/events.c on IA64
use set_xen_guest_handle() instead of direct assigning.

> linux-2.6/drivers/xen/events.c: In function 'xen_poll_irq':
> linux-2.6/drivers/xen/events.c:757: error: incompatible types in assignment
> make[4]: *** [drivers/xen/events.o] Error 1

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 21:54:37 +02:00
Isaku Yamahata
75909fd619 xen: portability clean up and some minor clean up for xencomm.c
clean up of xencomm.c. is_phys_contiguous() is arch dependent
function that depends on how virtual memory are laid out.
So split out the function into arch specific code.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
2008-10-23 21:54:36 +02:00
Jeremy Fitzhardinge
ed6e5e507e xen: don't reload cr3 on suspend
It isn't necessary, and it makes the code needlessly non-portable.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 21:54:35 +02:00
Al Viro
bb8985586b x86, um: ... and asm-x86 move
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22 22:55:20 -07:00
Thomas Gleixner
10e580842e genirq: use iterators for irq_desc loops
Use for_each_irq_desc[_reverse] for all the iteration loops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:30 +02:00
Alex Nixon
2b46b37de7 xen: fix memory access violation bug when CONFIG_HAVE_SPARSE_IRQ is enabled
When sparse IRQs are enabled, it is not safe to assume an IRQ descriptor
exists for every possible IRQ.  This patch causes init_evtchn_cpu_bindings
to skip initialisation of IRQ descriptors which don't exist.

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:58 +02:00
Yinghai Lu
08678b0841 generic: sparse irqs: use irq_desc() together with dyn_array, instead of irq_desc[]
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array.
Get rid of irq_desc[] array assumptions.

Preallocate 32 irq_desc, and irq_desc() will try to get more.

( No change in functionality is expected anywhere, except the odd build
  failure where we missed a code site or where a crossing commit itroduces
  new irq_desc[] usage. )

v2: according to Eric, change get_irq_desc() to irq_desc()

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:29 +02:00
Yinghai Lu
5a15d7e855 drivers/xen: use nr_irqs
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:07 +02:00
Jeremy Fitzhardinge
d19c8e516e xen: remove unused balloon.h
The balloon driver doesn't have any externally callable functions at
the moment, so remove the (effectively empty) header.  We can add it
back if we need to.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-03 10:04:10 +02:00
Ingo Molnar
3ce9bcb583 Merge branch 'core/xen' into x86/xen 2008-09-10 14:05:45 +02:00
Jeremy Fitzhardinge
0253398ca1 xen: fix 2.6.27-rc5 xen balloon driver warnings
Set the class so it doesn't clash with the normal memory class.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
===================================================================
2008-09-08 20:21:15 +02:00
Alex Nixon
5ab6d815dc Xen: fix cpu_hotplug build when !CONFIG_SMP
Compile cpu_hotplug.c conditionally on CONFIG_HOTPLUG_CPU

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 17:44:07 +02:00
Alex Nixon
5c51c637e4 Xen: fix cpu_hotplug.c build by replacing is_running_on_xen() with xen_pv_domain()
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 17:44:07 +02:00
Rusty Russell
37a7c0f3e3 stop_machine: wean Xen off stop_machine_run
This is the last use of (the deprecated) stop_machine_run in the tree.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2008-08-26 00:19:27 +10:00
Alex Nixon
d68d82afd4 xen: implement CPU hotplugging
Note the changes from 2.6.18-xen CPU hotplugging:

A vcpu_down request from the remote admin via Xenbus both hotunplugs the
CPU, and disables it by removing it from the cpu_present map, and removing
its entry in /sys.

A vcpu_up request from the remote admin only re-enables the CPU, and does
not immediately bring the CPU up. A udev event is emitted, which can be
caught by the user if he wishes to automatically re-up CPUs when available,
or implement a more complex policy.

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25 11:25:14 +02:00
Jeremy Fitzhardinge
168d2f464a xen: save previous spinlock when blocking
A spinlock can be interrupted while spinning, so make sure we preserve
the previous lock of interest if we're taking a lock from within an
interrupt handler.

We also need to deal with the case where the blocking path gets
interrupted between testing to see if the lock is free and actually
blocking.  If we get interrupted there and end up in the state where
the lock is free but the irq isn't pending, then we'll block
indefinitely in the hypervisor.  This fix is to make sure that any
nested lock-takers will always leave the irq pending if there's any
chance the outer lock became free.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21 13:52:57 +02:00
Jeremy Fitzhardinge
6e833587e1 xen: clean up domain mode predicates
There are four operating modes Xen code may find itself running in:
 - native
 - hvm domain
 - pv dom0
 - pv domU

Clean up predicates for testing for these states to make them more consistent.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20 12:40:07 +02:00
Jeremy Fitzhardinge
0d1edf46ba xen: compile irq functions without -pg for ftrace
For some reason I managed to miss a bunch of irq-related functions
which also need to be compiled without -pg when using ftrace.  This
patch moves them into their own file, and starts a cleanup process
I've been meaning to do anyway.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Alex Nixon (Intern)" <Alex.Nixon@eu.citrix.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31 12:39:39 +02:00
Jeremy Fitzhardinge
fde28e8f49 xen-balloon: clean up unused functions
Remove some unused functions:

balloon_update_driver_allowance
balloon_release_driver_page
	only used on the (obsolete, removed) flip path in netfront
alloc_empty_pages_and_pagevec
free_empty_pages_and_pagevec
	only used in backend drivers; can be reintroduced when needed

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 15:08:13 +02:00
Jeremy Fitzhardinge
167e6cf629 xen-balloon: fix up sysfs issues
1. Set the class so it doesn't clash with the normal memory class
2. Fix up the sysfs show functions to match the new prototype
3. Clean up use of memparse

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: "viets@work.de" <viets@work.de>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 15:08:07 +02:00
Andi Kleen
4a0b2b4dbe sysdev: Pass the attribute to the low level sysdev show/store function
This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.

I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.

I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.

Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:55:02 -07:00
Ingo Molnar
2e2dcc7631 Merge branch 'x86/paravirt-spinlocks' into x86/for-linus 2008-07-21 16:45:56 +02:00
Stephen Rothwell
55ca089e25 linux-next: pci tree build failure
Today's linux-next build (x86_64 allmodconfig) failed like this:

 drivers/xen/manage.c: In function 'xen_suspend':
 drivers/xen/manage.c:66: error: too few arguments to function 'device_power_up'
 drivers/xen/manage.c: In function 'do_suspend':
 drivers/xen/manage.c:117: error: too few arguments to function 'device_resume'

Caused by commit 1eede070a5 ("Introduce new
top level suspend and hibernation callbacks") interacting with new
usages ...

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 09:51:02 +02:00
Jeremy Fitzhardinge
2d9e1e2f58 xen: implement Xen-specific spinlocks
The standard ticket spinlocks are very expensive in a virtual
environment, because their performance depends on Xen's scheduler
giving vcpus time in the order that they're supposed to take the
spinlock.

This implements a Xen-specific spinlock, which should be much more
efficient.

The fast-path is essentially the old Linux-x86 locks, using a single
lock byte.  The locker decrements the byte; if the result is 0, then
they have the lock.  If the lock is negative, then locker must spin
until the lock is positive again.

When there's contention, the locker spin for 2^16[*] iterations waiting
to get the lock.  If it fails to get the lock in that time, it adds
itself to the contention count in the lock and blocks on a per-cpu
event channel.

When unlocking the spinlock, the locker looks to see if there's anyone
blocked waiting for the lock by checking for a non-zero waiter count.
If there's a waiter, it traverses the per-cpu "lock_spinners"
variable, which contains which lock each CPU is waiting on.  It picks
one CPU waiting on the lock and sends it an event to wake it up.

This allows efficient fast-path spinlock operation, while allowing
spinning vcpus to give up their processor time while waiting for a
contended lock.

[*] 2^16 iterations is threshold at which 98% locks have been taken
according to Thomas Friebel's Xen Summit talk "Preventing Guests from
Spinning Around".  Therefore, we'd expect the lock and unlock slow
paths will only be entered 2% of the time.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <clameter@linux-foundation.org>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Virtualization <virtualization@lists.linux-foundation.org>
Cc: Xen devel <xen-devel@lists.xensource.com>
Cc: Thomas Friebel <thomas.friebel@amd.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 11:15:53 +02:00
Isaku Yamahata
ad55db9fed xen: add xen_arch_resume()/xen_timer_resume hook for ia64 support
add xen_timer_resume() hook.

Timer resume should be done after event channel is resumed.
add xen_arch_resume() hook when ipi becomes usable after resume.
After resume, some cpu specific resource must be reinitialized
on ia64 that can't be set by another cpu.

However available hooks is run once on only one cpu so that ipi has
to be used.

During stop_machine_run() ipi can't be used because interrupt is masked.
So add another hook after stop_machine_run().
Another approach might be use resume hook which is run by
device_resume(). However device_resume() may be executed on
suspend error recovery path.

So it is necessary to determine whether it is executed on real resume path
or error recovery path.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 10:55:50 +02:00
Linus Torvalds
a3da5bf84a Merge branch 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (821 commits)
  x86: make 64bit hpet_set_mapping to use ioremap too, v2
  x86: get x86_phys_bits early
  x86: max_low_pfn_mapped fix #4
  x86: change _node_to_cpumask_ptr to return const ptr
  x86: I/O APIC: remove an IRQ2-mask hack
  x86: fix numaq_tsc_disable calling
  x86, e820: remove end_user_pfn
  x86: max_low_pfn_mapped fix, #3
  x86: max_low_pfn_mapped fix, #2
  x86: max_low_pfn_mapped fix, #1
  x86_64: fix delayed signals
  x86: remove conflicting nx6325 and nx6125 quirks
  x86: Recover timer_ack lost in the merge of the NMI watchdog
  x86: I/O APIC: Never configure IRQ2
  x86: L-APIC: Always fully configure IRQ0
  x86: L-APIC: Set IRQ0 as edge-triggered
  x86: merge dwarf2 headers
  x86: use AS_CFI instead of UNWIND_INFO
  x86: use ignore macro instead of hash comment
  x86: use matching CFI_ENDPROC
  ...
2008-07-14 13:43:24 -07:00
Ian Campbell
a144ff09bc xen: Avoid allocations causing swap activity on the resume path
Avoid allocations causing swap activity on the resume path by
preventing the allocations from doing IO and allowing them
to access the emergency pools.

These paths are used when a frontend device is trying to connect
to its backend driver over Xenbus.  These reconnections are triggered
on demand by IO, so by definition there is already IO underway,
and further IO would naturally deadlock.  On resume, this path
is triggered when the running system tries to continue using its
devices.  If it cannot then the resume will fail; to try to avoid this
we let it dip into the emergency pools.

[ linux-2.6.18-xen changesets e8b49cfbdac, fdb998e79aba ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03 13:21:13 +02:00
Isaku Yamahata
4653938379 xen: Use wmb instead of rmb in xen_evtchn_do_upcall().
This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg.
Use wmb instead of rmb to enforce ordering between
evtchn_upcall_pending and evtchn_pending_sel stores
in xen_evtchn_do_upcall().

Cc: Samuel Thibault <samuel.thibault@eu.citrix.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-20 14:56:30 +02:00
Isaku Yamahata
6673cf63e5 xen: Use wmb instead of rmb in xen_evtchn_do_upcall().
This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg.
Use wmb instead of rmb to enforce ordering between
evtchn_upcall_pending and evtchn_pending_sel stores
in xen_evtchn_do_upcall().

Cc: Samuel Thibault <samuel.thibault@eu.citrix.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-20 14:55:10 +02:00
Jeremy Fitzhardinge
c78277288e CONFIG_PM_SLEEP fix: xen: fix compilation when CONFIG_PM_SLEEP is disabled
Xen save/restore depends on CONFIG_PM_SLEEP being set for device_power_up/down.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 12:14:16 +02:00
Jeremy Fitzhardinge
359cdd3f86 xen: maintain clock offset over save/restore
Hook into the device model to make sure that timekeeping's resume handler
is called.  This deals with our clocksource's non-monotonicity over the
save/restore.  Explicitly call clock_has_changed() to make sure that
all the timers get retriggered properly.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:38 +02:00
Jeremy Fitzhardinge
0e91398f2a xen: implement save/restore
This patch implements Xen save/restore and migration.

Saving is triggered via xenbus, which is polled in
drivers/xen/manage.c.  When a suspend request comes in, the kernel
prepares itself for saving by:

1 - Freeze all processes.  This is primarily to prevent any
    partially-completed pagetable updates from confusing the suspend
    process.  If CONFIG_PREEMPT isn't defined, then this isn't necessary.

2 - Suspend xenbus and other devices

3 - Stop_machine, to make sure all the other vcpus are quiescent.  The
    Xen tools require the domain to run its save off vcpu0.

4 - Within the stop_machine state, it pins any unpinned pgds (under
    construction or destruction), performs canonicalizes various other
    pieces of state (mostly converting mfns to pfns), and finally

5 - Suspend the domain

Restore reverses the steps used to save the domain, ending when all
the frozen processes are thawed.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:38 +02:00
Jeremy Fitzhardinge
7d88d32a46 xenbus: rebind irq on restore
When restoring, rebind the existing xenbus irq to the new xenbus event
channel.  (It turns out in practice that this is always the same, and
is never updated on restore.  That's a bug, but Xeno-linux has been
like this for a long time, so it can't really be fixed.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:38 +02:00
Jeremy Fitzhardinge
0f2287ad7c xen: fix unbind_from_irq()
Rearrange the tests in unbind_from_irq() so that we can still unbind
an irq even if the underlying event channel is bad.  This allows a
device driver to shuffle its irqs on save/restore before the
underlying event channels have been fixed up.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:37 +02:00
Jeremy Fitzhardinge
eb1e305f4e xen: add rebind_evtchn_irq
Add rebind_evtchn_irq(), which will rebind an device driver's existing
irq to a new event channel on restore.  Since the new event channel
will be masked and bound to vcpu0, we update the state accordingly and
unmask the irq once everything is set up.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:37 +02:00
Adrian Bunk
955d6f1778 xen: drivers/xen/balloon.c: make a function static
Make the needlessly global balloon_set_new_target() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:37 +02:00
Isaku Yamahata
a90971ebdd xen: compilation fix to balloon driver for ia64 support
fix compilation error of ballon driver on ia64.
extent_start member is pointer argument. On x86 pointer argument for
xen hypercall is passed as virtual address.
On the other hand, ia64 and ppc, pointer argument is passed in pseudo
physical address. (guest physicall address.)
So they must be passed as handle and convert right before issuing hypercall.

  CC      drivers/xen/balloon.o
linux-2.6-x86/drivers/xen/balloon.c: In function 'increase_reservation':
linux-2.6-x86/drivers/xen/balloon.c:228: error: incompatible types in assignment
linux-2.6-x86/drivers/xen/balloon.c: In function 'decrease_reservation':
linux-2.6-x86/drivers/xen/balloon.c:324: error: incompatible types in assignment
linux-2.6-x86/drivers/xen/balloon.c: In function 'dealloc_pte_fn':
linux-2.6-x86/drivers/xen/balloon.c:486: error: incompatible types in assignment
linux-2.6-x86/drivers/xen/balloon.c: In function 'alloc_empty_pages_and_pagevec':
linux-2.6-x86/drivers/xen/balloon.c:522: error: incompatible types in assignment
make[2]: *** [drivers/xen/balloon.o] Error 1

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:36 +02:00
Isaku Yamahata
ec9b2065d4 xen: Move manage.c to drivers/xen for ia64/xen support
move arch/x86/xen/manage.c under drivers/xen/to share codes
with x86 and ia64.
ia64/xen also uses manage.c

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:36 +02:00
Jeremy Fitzhardinge
1775826cee xen: add balloon driver
The balloon driver allows memory to be dynamically added or removed from the domain,
in order to allow host memory to be balanced between multiple domains.

This patch introduces the Xen balloon driver, though it currently only
allows a domain to be shrunk from its initial size (and re-grown back to
that size).  A later patch will add the ability to grow a domain beyond
its initial size.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Mark McLoughlin
d2f0c52bec xen: Module autoprobing support for frontend drivers
Add module aliases to support autoprobing modules
for xen frontend devices.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Christian Limpach
1d78d70556 xen blkfront: Delay wait for block devices until after the disk is added
When the xen block frontend driver is built as a module the module load
is only synchronous up to the point where the frontend and the backend
become connected rather than when the disk is added.

This means that there can be a race on boot between loading the module and
loading the dm-* modules and doing the scan for LVM physical volumes (all
in the initrd). In the failure case the disk is not present until after the
scan for physical volumes is complete.

Taken from:

  http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/11483a00c017

Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Isaku Yamahata
b15993fcc1 xen: import arch generic part of xencomm
On xen/ia64 and xen/powerpc hypercall arguments are passed by pseudo
physical address (guest physical address) so that it's necessary to
convert from virtual address into pseudo physical address. The frame
work is called xencomm.
Import arch generic part of xencomm.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00
Isaku Yamahata
8d3d2106c1 xen: make grant table arch portable
split out x86 specific part from grant-table.c and
allow ia64/xen specific initialization.
ia64/xen grant table is based on pseudo physical address
(guest physical address) unlike x86/xen. On ia64 init_mm
doesn't map identity straight mapped area.
ia64/xen specific grant table initialization is necessary.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00
Isaku Yamahata
5f0ababbf4 xen: replace callers of alloc_vm_area()/free_vm_area() with xen_ prefixed one
Don't use alloc_vm_area()/free_vm_area() directly, instead define
xen_alloc_vm_area()/xen_free_vm_area() and use them.

alloc_vm_area()/free_vm_area() are used to allocate/free area which
are for grant table mapping. Xen/x86 grant table is based on virtual
address so that alloc_vm_area()/free_vm_area() are suitable.
On the other hand Xen/ia64 (and Xen/powerpc) grant table is based on
pseudo physical address (guest physical address) so that allocation
should be done differently.
The original version of xenified Linux/IA64 have its own
allocate_vm_area()/free_vm_area() definitions which don't allocate vm area
contradictory to those names.
Now vanilla Linux already has its definitions so that it's impossible
to have IA64 definitions of allocate_vm_area()/free_vm_area().
Instead introduce xen_allocate_vm_area()/xen_free_vm_area() and use them.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00
Isaku Yamahata
642e0c882c xen: add resend_irq_on_evtchn() definition into events.c
Define resend_irq_on_evtchn() which ia64/xen uses.
Although it isn't used by current x86/xen code, it's arch generic
so that put it into common code.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00
Isaku Yamahata
e849c3e9e0 Xen: make events.c portable for ia64/xen support
Remove x86 dependency in drivers/xen/events.c for ia64/xen support
introducing include/asm/xen/events.h.
Introduce xen_irqs_disabled() to hide regs->flags
Introduce xen_do_IRQ() to hide regs->orig_ax.
make enum ipi_vector definition arch specific. ia64/xen needs four vectors.
Add one rmb() because on ia64 xchg() isn't barrier.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00
Isaku Yamahata
e04d0d0767 xen: move events.c to drivers/xen for IA64/Xen support
move arch/x86/xen/events.c undedr drivers/xen to share codes
with x86 and ia64. And minor adjustment to compile.
ia64/xen also uses events.c

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00
Isaku Yamahata
af711cda4f xen: move features.c from arch/x86/xen/features.c to drivers/xen
ia64/xen also uses it too. Move it into common place so that
ia64/xen can share the code.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00