Commit graph

336 commits

Author SHA1 Message Date
Steven Rostedt
ad8d75fff8 tracing/events: move trace point headers into include/trace/events
Impact: clean up

Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 22:05:43 -04:00
Steven Rostedt
a8d154b009 tracing: create automated trace defines
This patch lowers the number of places a developer must modify to add
new tracepoints. The current method to add a new tracepoint
into an existing system is to write the trace point macro in the
trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or
DECLARE_TRACE, then they must add the same named item into the C file
with the macro DEFINE_TRACE(name) and then add the trace point.

This change cuts out the needing to add the DEFINE_TRACE(name).
Every file that uses the tracepoint must still include the trace/<type>.h
file, but the one C file must also add a define before the including
of that file.

 #define CREATE_TRACE_POINTS
 #include <trace/mytrace.h>

This will cause the trace/mytrace.h file to also produce the C code
necessary to implement the trace point.

Note, if more than one trace/<type>.h is used to create the C code
it is best to list them all together.

 #define CREATE_TRACE_POINTS
 #include <trace/foo.h>
 #include <trace/bar.h>
 #include <trace/fido.h>

Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with
the cleaner solution of the define above the includes over my first
design to have the C code include a "special" header.

This patch converts sched, irq and lockdep and skb to use this new
method.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 12:57:28 -04:00
Pallipadi, Venkatesh
6ec3cfeca0 x86, irq: Remove IRQ_DISABLED check in process context IRQ move
As discussed in the thread here:

  http://marc.info/?l=linux-kernel&m=123964468521142&w=2

Eric W. Biederman observed:

> It looks like some additional bugs have slipped in since last I looked.
>
> set_irq_affinity does this:
> ifdef CONFIG_GENERIC_PENDING_IRQ
>        if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
>                cpumask_copy(desc->affinity, cpumask);
>                desc->chip->set_affinity(irq, cpumask);
>        } else {
>                desc->status |= IRQ_MOVE_PENDING;
>                cpumask_copy(desc->pending_mask, cpumask);
>        }
> #else
>
> That IRQ_DISABLED case is a software state and as such it has nothing to
> do with how safe it is to move an irq in process context.

[...]

>
> The only reason we migrate MSIs in interrupt context today is that there
> wasn't infrastructure for support migration both in interrupt context
> and outside of it.

Yes. The idea here was to force the MSI migration to happen in process
context. One of the patches in the series did

        disable_irq(dev->irq);
        irq_set_affinity(dev->irq, cpumask_of(dev->cpu));
        enable_irq(dev->irq);

with the above patch adding irq/manage code check for interrupt disabled
and moving the interrupt in process context.

IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET
code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there
when we eventually submitted the patch upstream. But, looks like I did a
blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code.

Below patch fixes this. i.e., revert commit 932775a4ab
and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity
in generic code as set_affinity routines are doing it internally.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Li Shaohua" <shaohua.li@intel.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: "lcm@us.ibm.com" <lcm@us.ibm.com>
Cc: suresh.b.siddha@intel.com
LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-14 15:21:13 +02:00
Linus Torvalds
422a253483 Merge branches 'core-fixes-for-linus', 'irq-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  printk: fix wrong format string iter for printk
  futex: comment requeue key reference semantics

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: fix cpumask memory leak on offstack cpumask kernels

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF)
  posix-timers: fix RLIMIT_CPU && fork()
  timers: add missing kernel-doc
2009-04-09 10:35:30 -07:00
Ingo Molnar
9efe21cb82 Merge branch 'linus' into irq/threaded
Conflicts:
	include/linux/irq.h
	kernel/irq/handle.c
2009-04-06 01:41:22 +02:00
Yinghai Lu
9756b15e1b irq: fix cpumask memory leak on offstack cpumask kernels
Need to free the old cpumask for affinity and pending_mask.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49D18FF0.50707@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-03 19:14:44 +02:00
Ingo Molnar
8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Rafael J. Wysocki
0a0c5168df PM: Introduce functions for suspending and resuming device interrupts
Introduce helper functions allowing us to prevent device drivers from
getting any interrupts (without disabling interrupts on the CPU)
during suspend (or hibernation) and to make them start to receive
interrupts again during the subsequent resume.  These functions make it
possible to keep timer interrupts enabled while the "late" suspend and
"early" resume callbacks provided by device drivers are being
executed.  In turn, this allows device drivers' "late" suspend and
"early" resume callbacks to sleep, execute ACPI callbacks etc.

The functions introduced here will be used to rework the handling of
interrupts during suspend (hibernation) and resume.  Namely,
interrupts will only be disabled on the CPU right before suspending
sysdevs, while device drivers will be prevented from receiving
interrupts, with the help of the new helper function, before their
"late" suspend callbacks run (and analogously during resume).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:46:54 +02:00
Ingo Molnar
6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Thomas Gleixner
f48fe81e5b genirq: threaded irq handlers review fixups
Delta patch to address the review comments.

      - Implement warning when IRQ_WAKE_THREAD is requested and no
        thread handler installed
      - coding style fixes

Pointed-out-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24 12:15:23 +01:00
Arjan van de Ven
935bd5b971 genirq: add support for threaded interrupts to devres
Some devices use devres_request_irq() for to install their interrupt
handler. Add support for threaded interrupts to devres as well.

[tglx - simplified and adapted to latest threadirq version]

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24 12:15:23 +01:00
Thomas Gleixner
3aa551c9b4 genirq: add threaded interrupt handler support
Add support for threaded interrupt handlers:

A device driver can request that its main interrupt handler runs in a
thread. To achive this the device driver requests the interrupt with
request_threaded_irq() and provides additionally to the handler a
thread function. The handler function is called in hard interrupt
context and needs to check whether the interrupt originated from the
device. If the interrupt originated from the device then the handler
can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is
returned when no further action is required. IRQ_WAKE_THREAD causes
the genirq code to invoke the threaded (main) handler. When
IRQ_WAKE_THREAD is returned handler must have disabled the interrupt
on the device level. This is mandatory for shared interrupt handlers,
but we need to do it as well for obscure x86 hardware where disabling
an interrupt on the IO_APIC level redirects the interrupt to the
legacy PIC interrupt lines.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 12:15:23 +01:00
Thomas Gleixner
80c5520811 Merge branch 'cpus4096' into irq/threaded
Conflicts:
	arch/parisc/kernel/irq.c
	kernel/irq/handle.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-23 21:20:20 +01:00
Ingo Molnar
edb35028e4 Merge branches 'irq/genirq' and 'linus' into irq/core 2009-03-16 09:20:13 +01:00
Thomas Gleixner
0e57aa11ab genirq: deprecate __do_IRQ
Two years migration time is enough. Remove the compability cruft.

Add the deprecated warning in kernel/irq/handle.c because marking
__do_IRQ itself is way too noisy.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-13 16:34:02 +01:00
Thomas Gleixner
4553573277 genirq: use kzalloc instead of explicit zero initialization
Impact: simplification

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2009-03-13 14:32:29 +01:00
Thomas Gleixner
c8e2aeef0b genirq: remove redundant if condition
Impact: cleanup

The code is only compiled if CONFIG_GENERIC_HARDIRQS=y so another
check for this define in the code is redundant. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-13 14:32:28 +01:00
Magnus Damm
eb53b4e8fe irq: export remove_irq() and setup_irq() symbols
Export the setup_irq() and remove_irq() symbols.

I'd like to export these functions since I have timer
code that needs to use setup_irq() early on (too early
for request_irq()), and the same code can also be
compiled as a module.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090312120559.2926.82371.sendpatchset@rx1.opensource.se>
[ changed to _GPL as these are special APIs deep inside the irq layer. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:16:33 +01:00
Magnus Damm
cbf94f0682 irq: match remove_irq() args with setup_irq()
Modify remove_irq() to match setup_irq().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090312120551.2926.43942.sendpatchset@rx1.opensource.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:16:33 +01:00
Magnus Damm
f21cfb258d irq: add remove_irq() for freeing of setup_irq() irqs
Impact: add new API

This patch adds a remove_irq() function for releasing
interrupts requested with setup_irq().

Without this patch we have no way of releasing such
interrupts since free_irq() today tries to kfree()
the irqaction passed with setup_irq().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090312120542.2926.56609.sendpatchset@rx1.opensource.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:16:32 +01:00
Ingo Molnar
f0ef039851 Merge branch 'x86/core' into tracing/textedit
Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 16:45:01 +01:00
Peter Zijlstra
044d408409 genirq: assert that irq handlers are indeed running in hardirq context
Make sure the genirq layer handlers are indeed running handlers
in hardirq context. That is the genirq expectation and doing
anything else is broken.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1236006812.5330.632.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-03 00:05:45 +01:00
Ingo Molnar
c02368a9d0 Merge branch 'linus' into irq/genirq 2009-03-02 22:08:56 +01:00
Jason Baron
af39241b90 tracing, genirq: add irq enter and exit trace events
Impact: add new tracepoints

Add them to the generic IRQ code, that way every architecture
gets these new tracepoints, not just x86.

Using Steve's new 'TRACE_FORMAT', I can get function graph
trace as follows using the original two IRQ tracepoints:

 3)               |    handle_IRQ_event() {
 3)               |    /* (irq_handler_entry) irq=28 handler=eth0 */
 3)               |    e1000_intr_msi() {
 3)   2.460 us    |      __napi_schedule();
 3)   9.416 us    |    }
 3)               |    /* (irq_handler_exit) irq=28 handler=eth0 return=handled */
 3) + 22.935 us   |  }

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 18:43:50 +01:00
Ingo Molnar
f17c75453b irq: name 'p' variables a bit better
'p' stands for pointer - make it clear in setup_irq() and free_irq()
what kind of pointer it is.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 20:44:47 +01:00
Ingo Molnar
8316e38100 irq: further clean up the free_irq() code flow
Linus noticed that the 'pp' variable can be eliminated
altogether, and the loop can be cleaned up further.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 20:28:29 +01:00
Ingo Molnar
ae88a23b32 irq: refactor and clean up the free_irq() code flow
Impact: cleanup

- separate out the loop from the actual freeing logic, this wins us
  two indentation levels allowing a number of followup prettifications

- turn the WARN_ON() into a more informative WARN().

- clean up the comments and the code flow some more

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15 11:36:49 +01:00
Ingo Molnar
327ec5699c irq: clean up manage.c
- make printk message git-greppable
- fix a few style details

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15 11:21:37 +01:00
Ingo Molnar
8f8573ae9f Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/core 2009-02-13 11:57:18 +01:00
Johannes Weiner
0e43785c57 irq: use GFP_KERNEL for action allocation in request_irq()
request_irq() calls into proc code via __setup_irq() which is not safe
in an atomic context, so request_irq() can itself use the more
reliable GFP_KERNEL allocation for the action descriptor.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 10:52:07 +01:00
Ingo Molnar
249d51b53a Merge commit 'v2.6.29-rc4' into core/percpu
Conflicts:
	arch/x86/mach-voyager/voyager_smp.c
	arch/x86/mm/fault.c
2009-02-09 14:58:11 +01:00
Hannes Eder
548c893380 kernel/irq: fix sparse warning: make symbol static
While being at it make every occurrence of 'do_irq_select_affinity'
have the same signature in terms of signedness of the first argument.

Fix this sparse warning:
  kernel/irq/manage.c:112:5: warning: symbol 'do_irq_select_affinity' was not declared. Should it be static?

Also rename do_irq_select_affinity() to setup_affinity() - shorter name
and clearer naming.

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 10:14:05 +01:00
Yinghai Lu
005bf0e6fa irq: optimize init_kstat_irqs/init_copy_kstat_irqs
Simplify and make init_kstat_irqs etc more type proof, suggested by
Andrew.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 09:02:34 +01:00
Yinghai Lu
0f3c2a89c1 irq: clear kstat_irqs
Impact: get correct kstat_irqs [/proc/interrupts] for msi/msi-x etc

need to call clear_kstat_irqs(), so when we reuse that irq_desc,
we get correct kstat in /proc/interrupts.

This makes /proc/interrupts not have <NULL> entries.

Don't need to worry about arch that doesn't support genirq, because they
will not call dynamic_irq_cleanup().

v2: simplify and make clear_kstat_irqs more robust

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 08:55:08 +01:00
Ingo Molnar
9d45cf9e36 Merge branch 'x86/urgent' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic merge:
	arch/x86/kernel/irqinit_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:30:01 +01:00
Ingo Molnar
bb960a1e42 Merge branch 'core/xen' into x86/urgent 2009-02-04 14:54:56 +01:00
Yinghai Lu
10b888d6ce irq, x86: fix lock status with numa_migrate_irq_desc
Eric Paris reported:

> I have an hp dl785g5 which is unable to successfully run
> 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126.  During bootup
> (early in userspace daemons starting) I get the below BUG, which quickly
> renders the machine dead.  I assume it is because sparse_irq_lock never
> gets released when the BUG kills that task.

Adjust lock sequence when migrating a descriptor with
CONFIG_NUMA_MIGRATE_IRQ_DESC enabled.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01 11:36:31 +01:00
Linus Torvalds
ac56b94f80 Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: export __set_irq_handler() and handle_level_irq()
2009-01-31 15:54:30 -08:00
Ingo Molnar
c43e0e46ad Merge branch 'linus' into core/percpu
Conflicts:
	kernel/irq/handle.c
2009-01-30 18:23:30 +01:00
Ingo Molnar
6a385db5ce Merge branch 'core/percpu' into x86/core
Conflicts:
	kernel/irq/handle.c
2009-01-28 23:12:55 +01:00
David Daney
97179fd46d cpumask fallout: Initialize irq_default_affinity earlier
Move the initialization of irq_default_affinity to early_irq_init as
core_initcall is too late.

irq_default_affinity can be used in init_IRQ and potentially timer and
SMP init as well.  All of these happen before core_initcall.  Moving
the initialization to early_irq_init ensures that it is initialized
before it is used.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Mike Travis <travis@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27 16:06:55 -08:00
David Daney
1267a8df20 Make irq_*_affinity depend on CONFIG_GENERIC_HARDIRQS too.
In interrupt.h these functions are declared only if
CONFIG_GENERIC_HARDIRQS is set.  We should define them under identical
conditions.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27 16:06:49 -08:00
Ingo Molnar
74296a8ed6 irq: provide debug_poll_all_shared_irqs() method under CONFIG_DEBUG_SHIRQ
Provide a shared interrupt debug facility under CONFIG_DEBUG_SHIRQ:
it uses the existing irqpoll facilities to iterate through all
registered interrupt handlers and call those which can handle shared
IRQ lines.

This can be handy for suspend/resume debugging: if we call this function
early during resume we can trigger crashes in those drivers which have
incorrect assumptions about when exactly their ISRs will be called
during suspend/resume.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 17:46:49 +01:00
Ingo Molnar
5a2dd72abd Merge branch 'linus' into irq/genirq 2009-01-16 17:46:22 +01:00
Ingo Molnar
14819ea1e0 irq: export __set_irq_handler() and handle_level_irq()
Impact: build fix

ARM updates broke x86 allmodconfig builds:

 ERROR: "__set_irq_handler" [drivers/mfd/pcf50633-core.ko] undefined!
 ERROR: "handle_level_irq" [drivers/mfd/pcf50633-core.ko] undefined!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:34:21 +01:00
Yinghai Lu
4a046d1754 x86: arch_probe_nr_irqs
Impact: save RAM with large NR_CPUS, get smaller nr_irqs

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-12 17:39:24 -08:00
Mike Travis
92296c6d6e cpumask, irq: non-x86 build failures
Ingo Molnar wrote:

> All non-x86 architectures fail to build:
>
> In file included from /home/mingo/tip/include/linux/random.h:11,
>                  from /home/mingo/tip/include/linux/stackprotector.h:6,
>                  from /home/mingo/tip/init/main.c:17:
> /home/mingo/tip/include/linux/irqnr.h:26:63: error: asm/irq_vectors.h: No such file or directory

Do not include asm/irq_vectors.h in generic code - it's not available
on all architectures.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11 19:13:45 +01:00
Mike Travis
542d865bbe kstat: modify kstat_irqs_legacy to be variable sized
Impact: reduce memory usage.

Allocate kstat_irqs_legacy based on nr_cpu_ids to deal with this
memory usage bump when NR_CPUS bumped from 128 to 4096:

     8192   +253952    262144 +3100%  kstat_irqs_legacy(.bss)

This is only when CONFIG_SPARSE_IRQS=y.

Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 19:13:42 +01:00
Mike Travis
9332fccded irq: initialize nr_irqs based on nr_cpu_ids
Impact: Reduce memory usage.

This is the second half of the changes to make the irq_desc_ptrs be
variable sized based on nr_cpu_ids.  This is done by adding a new
"max_nr_irqs" macro to irq_vectors.h (and a dummy in irqnr.h) to
return a max NR_IRQS value based on NR_CPUS or nr_cpu_ids.

This necessitated moving the define of MAX_IO_APICS to a separate
file (asm/apicnum.h) so it could be included without the baggage
of the other asm/apicdef.h declarations.

Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 19:13:38 +01:00
Mike Travis
0fa0ebbf15 irq: allocate irq_desc_ptrs array based on nr_irqs
Impact: allocate irq_desc_ptrs in preparation for making it variable-sized.

This addresses this memory usage bump when NR_CPUS bumped from 128 to 4096:

    34816   +229376    264192  +658%  irq_desc_ptrs(.data.read_mostly)

The patch is split into two parts, the first simply allocates the
irq_desc_ptrs array.  Then next will deal with making it variable.
This is only when CONFIG_SPARSE_IRQS=y.

Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 19:13:35 +01:00
Mike Travis
e2f4d06545 irq: use WARN() instead of WARN_ON().
Impact: cleanup WARN msg.

Ingo requested:
> While at it, could you please also convert this to a WARN() construct
> instead? (in a separate commit)

... and it shall be done.  ;-)

Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 19:13:32 +01:00
Mike Travis
9594949b06 irq: change references from NR_IRQS to nr_irqs
Impact: preparation, cleanup, add KERN_INFO printk

Modify references from NR_IRQS to nr_irqs as the later will become
variable-sized based on nr_cpu_ids when CONFIG_SPARSE_IRQS=y.

Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 19:13:29 +01:00
Mike Travis
802bf931f2 cpumask: fix bug in use cpumask_var_t in irq_desc
Impact: fix bug where new irq_desc uses old cpumask pointers which are freed.

As Yinghai pointed out, init_copy_one_irq_desc() copies the old desc to
the new desc overwriting the cpumask pointers.  Since the old_desc and
the cpumask pointers are freed, then memory corruption will occur if
these old pointers are used.

Move the allocation of these pointers to after the copy.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
2009-01-11 19:13:02 +01:00
Mike Travis
7f7ace0cda cpumask: update irq_desc to use cpumask_var_t
Impact: reduce memory usage, use new cpumask API.

Replace the affinity and pending_masks with cpumask_var_t's.  This adds
to the significant size reduction done with the SPARSE_IRQS changes.

The added functions (init_alloc_desc_masks & init_copy_desc_masks) are
in the include file so they can be inlined (and optimized out for the
!CONFIG_CPUMASKS_OFFSTACK case.)  [Naming chosen to be consistent with
the other init*irq functions, as well as the backwards arg declaration
of "from, to" instead of the more common "to, from" standard.]

Includes a slight change to the declaration of struct irq_desc to embed
the pending_mask within ifdef(CONFIG_SMP) to be consistent with other
references, and some small changes to Xen.

Tested: sparse/non-sparse/cpumask_offstack/non-cpumask_offstack/nonuma/nosmp on x86_64

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: virtualization@lists.osdl.org
Cc: xen-devel@lists.xensource.com
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
2009-01-11 19:12:46 +01:00
Yinghai Lu
d7e51e6689 sparseirq: make some func to be used with genirq
Impact: clean up sparseirq fallout on random.c

Ingo suggested to change some ifdef from SPARSE_IRQ to GENERIC_HARDIRQS
so we could some #ifdef later if all arch support genirq

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11 04:46:26 +01:00
Arjan van de Ven
22a9d64567 async: Asynchronous function calls to speed up kernel boot
Right now, most of the kernel boot is strictly synchronous, such that
various hardware delays are done sequentially.

In order to make the kernel boot faster, this patch introduces
infrastructure to allow doing some of the initialization steps
asynchronously, which will hide significant portions of the hardware delays
in practice.

In order to not change device order and other similar observables, this
patch does NOT do full parallel initialization.

Rather, it operates more in the way an out of order CPU does; the work may
be done out of order and asynchronous, but the observable effects
(instruction retiring for the CPU) are still done in the original sequence.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-07 08:45:46 -08:00
Linus Torvalds
7d3b56ba37 Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
  x86: setup_per_cpu_areas() cleanup
  cpumask: fix compile error when CONFIG_NR_CPUS is not defined
  cpumask: use alloc_cpumask_var_node where appropriate
  cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
  x86: use cpumask_var_t in acpi/boot.c
  x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
  sched: put back some stack hog changes that were undone in kernel/sched.c
  x86: enable cpus display of kernel_max and offlined cpus
  ia64: cpumask fix for is_affinity_mask_valid()
  cpumask: convert RCU implementations, fix
  xtensa: define __fls
  mn10300: define __fls
  m32r: define __fls
  h8300: define __fls
  frv: define __fls
  cris: define __fls
  cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
  cpumask: zero extra bits in alloc_cpumask_var_node
  cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
  cpumask: convert mm/
  ...
2009-01-03 12:04:39 -08:00
Ingo Molnar
6bdf197b04 ia64: cpumask fix for is_affinity_mask_valid()
Impact: build fix on ia64

ia64's default_affinity_write() still had old cpumask_t usage:

 /home/mingo/tip/kernel/irq/proc.c: In function `default_affinity_write':
 /home/mingo/tip/kernel/irq/proc.c:114: error: incompatible type for argument 1 of `is_affinity_mask_valid'
 make[3]: *** [kernel/irq/proc.o] Error 1
 make[3]: *** Waiting for unfinished jobs....

update it to cpumask_var_t.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:59:33 +01:00
Linus Torvalds
b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Rusty Russell
d036e67b40 cpumask: convert kernel/irq
Impact: Reduce stack usage, use new cpumask API.  ALPHA mod!

Main change is that irq_default_affinity becomes a cpumask_var_t, so
treat it as a pointer (this effects alpha).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-01 10:12:26 +10:30
Linus Torvalds
db200df0b3 Merge branch 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sparseirq: move __weak symbols into separate compilation unit
  sparseirq: work around __weak alias bug
  sparseirq: fix hang with !SPARSE_IRQ
  sparseirq: set lock_class for legacy irq when sparse_irq is selected
  sparseirq: work around compiler optimizing away __weak functions
  sparseirq: fix desc->lock init
  sparseirq: do not printk when migrating IRQ descriptors
  sparseirq: remove duplicated arch_early_irq_init()
  irq: simplify for_each_irq_desc() usage
  proc: remove ifdef CONFIG_SPARSE_IRQ from stat.c
  irq: for_each_irq_desc() move to irqnr.h
  hrtimer: remove #include <linux/irq.h>
2008-12-31 09:00:59 -08:00
Rusty Russell
2ca1a61583 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	arch/x86/kernel/io_apic.c
2008-12-31 23:05:57 +10:30
Linus Torvalds
179475a3b4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, sparseirq: clean up Kconfig entry
  x86: turn CONFIG_SPARSE_IRQ off by default
  sparseirq: fix numa_migrate_irq_desc dependency and comments
  sparseirq: add kernel-doc notation for new member in irq_desc, -v2
  locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
  sparseirq, xen: make sure irq_desc is allocated for interrupts
  sparseirq: fix !SMP building, #2
  x86, sparseirq: move irq_desc according to smp_affinity, v7
  proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
  sparse irqs: add irqnr.h to the user headers list
  sparse irqs: handle !GENIRQ platforms
  sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
  sparseirq: fix Alpha build failure
  sparseirq: fix typo in !CONFIG_IO_APIC case
  x86, MSI: pass irq_cfg and irq_desc
  x86: MSI start irq numbering from nr_irqs_gsi
  x86: use NR_IRQS_LEGACY
  sparse irq_desc[] array: core kernel and x86 changes
  genirq: record IRQ_LEVEL in irq_desc[]
  irq.h: remove padding from irq_desc on 64bits
2008-12-30 16:20:19 -08:00
Wang Chen
efdc64f0c7 genirq: check chip->ack before calling
Impact: fix theoretical NULL dereference

The generic irq layer doesn't know whether irq_chip has ack routine on some
architectures or not. Upon that, before calling chip->ack, we should check
that it's not NULL.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 12:22:29 +01:00
Yinghai Lu
43a256322a sparseirq: move __weak symbols into separate compilation unit
GCC has a bug with __weak alias functions: if the functions are in
the same compilation unit as their call site, GCC can decide to
inline them - and thus rob the linker of the opportunity to override
the weak alias with the real thing.

So move all the IRQ handling related __weak symbols to kernel/irq/chip.c.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 12:15:49 +01:00
Ingo Molnar
b2e2fe9962 sparseirq: work around __weak alias bug
Impact: fix boot crash if the kernel is built with certain GCC versions

GCC has a bug with __weak alias functions: if the functions are in
the same compilation unit as their call site, GCC can decide to
inline them - and thus rob the linker of the opportunity to override
the weak alias with the real thing.

This can lead to the boot crash reported by Kamalesh Babulal:

 ACPI: Core revision 20080926
 Setting APIC routing to flat
 BUG: unable to handle kernel NULL pointer dereference at
 0000000000000000
 IP: [<ffffffff8021f9a8>] add_pin_to_irq_cpu+0x14/0x74
 PGD 0
 Oops: 0000 [#1] SMP
 [...]

So move the arch_init_chip_data() function from handle.c to manage.c.

Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 00:19:55 +01:00
Yinghai Lu
12026ea16a sparseirq: fix hang with !SPARSE_IRQ
Impact: fix hang

Suresh report his two sockets system only works with SPARSE_IRQ enable
it turns out we miss the setting desc->irq

so provide early_irq_init() even !SPARSE_IRQ to set desc->irq

Reported-by: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27 17:52:07 +01:00
Yinghai Lu
fa6beb37b0 sparseirq: set lock_class for legacy irq when sparse_irq is selected
Impact: add lockdep annotation to legacy IRQ descs

Warnings resulting out of this were not seen in practice, but it's prudent
to initialize the legacy descriptors to the lock class as well, symmetric
to how we do it with other descriptors.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27 17:51:45 +01:00
Yinghai Lu
13a0c3c269 sparseirq: work around compiler optimizing away __weak functions
Impact: fix panic on null pointer with sparseirq

Some GCC versions seem to inline the weak global function,
when that function is empty.

Work it around, by making the functions return a (dummy) integer.

Signed-off-by: Yinghai <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27 13:24:00 +01:00
Ingo Molnar
793f7b12a0 sparseirq: fix desc->lock init
Impact: cleanup

init_one_irq_desc() does not initialize the desc->lock properly -
you cannot init a lock by memcpying some other lock on it.

This happens to work right now (because irq_desc_init is never in use),
but it's a dangerous construct nevertheless, so fix it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27 09:29:22 +01:00
Ingo Molnar
8b07cd4451 sparseirq: do not printk when migrating IRQ descriptors
Impact: reduce printk noise

There were a couple of leftover KERN_DEBUG debugging printks, remove
them. Also clarify an error message.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27 09:29:21 +01:00
Yinghai Lu
00c2363487 sparseirq: remove duplicated arch_early_irq_init()
Impact: clean up

We already have a weak copy of this function in init/main.c

Signed-off-by: Yinghai <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26 10:43:30 +01:00
KOSAKI Motohiro
18eefedfe8 irq: simplify for_each_irq_desc() usage
Impact: cleanup

all for_each_irq_desc() usage point have !desc check.
then its check can move into for_each_irq_desc() macro.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26 09:48:18 +01:00
KOSAKI Motohiro
26ddd8d5ca proc: remove ifdef CONFIG_SPARSE_IRQ from stat.c
Impact: cleanup

irq_desc can be NULL when CONFIG_SPARSE_IRQ=y only.
therefore, NULL checking can move into kstat_irqs_cpu() of SPARSE_IRQ version.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: "Yinghai Lu" <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26 09:48:18 +01:00
KOSAKI Motohiro
f9af0e7091 irq: for_each_irq_desc() move to irqnr.h
Impact: cleanup

before CONFIG_SPARSE_IRQ age, for_each_irq_desc() sat in irqnr.h and
could be called from generic code.

CONFIG_SPARSE_IRQ breaks this assumption, but SPARSE_IRQ version
for_each_irq_desc() also can move into irqnr.h easily.

Also, this patch unifies CONFIG_SPARSE_IRQ and !CONFIG_SPARSE_IRQ
for_each_irq_desc().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26 09:48:17 +01:00
Ingo Molnar
860cf8894b Merge branches 'irq/sparseirq', 'irq/genirq' and 'irq/urgent'; commit 'v2.6.28' into irq/core 2008-12-25 16:27:54 +01:00
Yinghai Lu
b909895739 sparseirq: fix numa_migrate_irq_desc dependency and comments
Impact: reduce kconfig variable scope and clean up

Bartlomiej pointed out that the config dependencies and comments are not right.

update it depend to NUMA, and fix some comments

Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 22:56:02 +01:00
KOSAKI Motohiro
74c8a61304 locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
Impact: simplify code

commit "08678b0: generic: sparse irqs: use irq_desc() [...]" introduced
the irq_desc_lock_class variable.

But it is used only if CONFIG_SPARSE_IRQ=Y or CONFIG_TRACE_IRQFLAGS=Y.
Otherwise, following warnings happen:

	CC      kernel/irq/handle.o
	kernel/irq/handle.c:26: warning: 'irq_desc_lock_class' defined but not used

Actually, current early_init_irq_lock_class has a bit strange and messy ifdef.
In addition, it is not valueable.

1. this function is protected by !CONFIG_SPARSE_IRQ, but that is not necessary.
   if CONFIG_SPARSE_IRQ=Y, desc of all irq number are initialized by NULL
   at first - then this function calling is safe.

2. this function protected by CONFIG_TRACE_IRQFLAGS too. but it is not
   necessary either, because lockdep_set_class() doesn't have bad side
   effect even if CONFIG_TRACE_IRQFLAGS=n.

This patch bloat kernel size a bit on CONFIG_TRACE_IRQFLAGS=n and
CONFIG_SPARSE_IRQ=Y - but that's ok. early_init_irq_lock_class() is not
a fastpatch at all.

To avoid messy ifdefs is more important than a few bytes diet.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 14:35:53 +01:00
Ingo Molnar
948a7b2b5e Merge branch 'irq/sparseirq' into cpus4096
Conflicts:
	arch/x86/kernel/io_apic.c

Merge irq/sparseirq here, to resolve conflicts.
2008-12-17 13:16:08 +01:00
Yinghai Lu
48a1b10aff x86, sparseirq: move irq_desc according to smp_affinity, v7
Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes

if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:

-  make irq_desc to go with affinity aka irq_desc moving etc
-  call move_irq_desc in irq_complete_move()
-  legacy irq_desc is not moved, because they are allocated via static array

for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-17 00:14:01 +01:00
Rusty Russell
968ea6d80e Merge ../linux-2.6-x86
Conflicts:

	arch/x86/kernel/io_apic.c
	kernel/sched.c
	kernel/sched_stats.h
2008-12-13 21:55:51 +10:30
Rusty Russell
0de26520c7 cpumask: make irq_set_affinity() take a const struct cpumask
Impact: change existing irq_chip API

Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.

Fortunately, not widely used code, but hits a few architectures.

Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly.  Ingo, does this break anything?

(Folded in fix from KOSAKI Motohiro)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13 21:20:26 +10:30
Rusty Russell
29c0177e6a cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and cpulist_scnprintf to take pointers.
Impact: change calling convention of existing cpumask APIs

Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.

These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
2008-12-13 21:20:25 +10:30
Yinghai Lu
99d093d128 x86: use NR_IRQS_LEGACY
Impact: cleanup

Introduce NR_IRQS_LEGACY instead of hard coded number.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:52 +01:00
Yinghai Lu
0b8f1efad3 sparse irq_desc[] array: core kernel and x86 changes
Impact: new feature

Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.

To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.

When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).

This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:51 +01:00
Ingo Molnar
cb9c34e6d0 Merge commit 'v2.6.28-rc7' into core/locking 2008-12-04 08:52:14 +01:00
David Brownell
470c66239e genirq: warn when IRQF_DISABLED may be ignored
Impact: emit new warning

We periodically waste time tracking down problems from the genirq
framework not respecting IRQF_DISABLED for some shared IRQ cases.  Linus
views this as "will not fix", but we're still left with the bugs caused by
this misbehavior.

This patch adds a nag message in request_irq(), so that drivers can fix
their IRQ handlers to avoid this problem.

Note that developers will never see the relevant bugs when they run with
LOCKDEP, so it's no wonder these bugs are hard to find.  (That also means
LOCKDEP is overlooking some IRQ-related bugs involving IRQ handlers that
don't set IRQF_DISABLED...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 11:25:29 +01:00
David Brownell
f2b662da8d genirq: record IRQ_LEVEL in irq_desc[]
Impact: fix __irq_set_trigger() for IRQ_LEVEL

When recording the irq trigger type, let's also make sure
that IRQ_LEVEL gets set correctly.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 11:20:46 +01:00
Mark Nelson
3ff68a6a10 genirq: __irq_set_trigger: change pr_warning to pr_debug
Commit 0c5d1eb77a (genirq: record trigger
type) caused powerpc platforms that had no set_type() function in their
struct irq_chip to spew out warnings about "No set_type function for
IRQ...". This warning isn't necessarily justified though because the
generic powerpc platform code calls set_irq_type() (which in turn calls
__irq_set_trigger) with information from the device tree to establish
the interrupt mappings, regardless of whether the PIC can actually set
a type.

A platform's irq_chip might not have a set_type function for a variety
of reasons, for example: the platform may have the type essentially
hard-coded, or as in the case for Cell interrupts are just messages
past around that have no real concept of type, or the platform
could even have a virtual PIC as on the PS3.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-13 11:59:48 +01:00
Ingo Molnar
f131e2436d irq: fix typo
Impact: build fix

fix build failure on UP.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-09 22:26:45 +01:00
Thomas Gleixner
612e3684c1 genirq: fix the affinity setting in setup_irq
The affinity setting in setup irq is called before the NO_BALANCING
flag is checked and might therefore override affinity settings from the
calling code with the default setting.

Move the NO_BALANCING flag check before the call to the affinity
setting.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-09 22:23:54 +01:00
Thomas Gleixner
f6d87f4bd2 genirq: keep affinities set from userspace across free/request_irq()
Impact: preserve user-modified affinities on interrupts

Kumar Galak noticed that commit
1840475676 (genirq: Expose default irq
affinity mask (take 3))

overrides an already set affinity setting across a free /
request_irq(). Happens e.g. with ifdown/ifup of a network device.

Change the logic to mark the affinities as set and keep them
intact. This also fixes the unlocked access to irq_desc in
irq_select_affinity() when called from irq_affinity_proc_write()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-09 22:23:49 +01:00
roel kluin
3786fc710c irq: make variable static
This variable is only used in the source file, so make it static.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22 07:37:17 +02:00
Dean Nelson
b6f3b7803a genirq: NULL struct irq_desc's member 'name' in dynamic_irq_cleanup()
If the member 'name' of the irq_desc structure happens to point to a
character string that is resident within a kernel module, problems ensue
if that module is rmmod'd (at which time dynamic_irq_cleanup() is called)
and then later show_interrupts() is called by someone.

It is also not a good thing if the character string resided in kmalloc'd
space that has been kfree'd (after having called dynamic_irq_cleanup()).
dynamic_irq_cleanup() fails to NULL the 'name' member and
show_interrupts() references it on a few architectures (like h8300, sh and
x86).

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-21 15:59:21 +02:00
Chris Friesen
0b3682ba33 genirq: fix set_irq_type() when recording trigger type
Impact: fix boot hang on a G5

In set_irq_type() we want to pass the type rather than the current
interrupt state.

Signed-off-by: Chris Friesen <cfriesen@nortel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-21 10:10:08 +02:00
Thomas Gleixner
63d659d556 genirq: fix name space collision of nr_irqs in autoprobe.c
probe_irq_off() is disfunctional as the local nr_irqs is referenced
instead of the global one for the for_each_irq_desc() iterator.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:30 +02:00
Thomas Gleixner
10e580842e genirq: use iterators for irq_desc loops
Use for_each_irq_desc[_reverse] for all the iteration loops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:30 +02:00
Thomas Gleixner
d3c60047bd genirq: cleanup the sparseirq modifications
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:29 +02:00
Thomas Gleixner
d6c88a507e genirq: revert dynarray
Revert the dynarray changes. They need more thought and polishing.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:15 +02:00
Thomas Gleixner
ee32c97322 genirq: remove irq_to_desc_alloc
Remove the leftover of sparseirqs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:15 +02:00