Commit graph

46 commits

Author SHA1 Message Date
Yinghai Lu
893f38d144 x86: Use find_e820() instead of hard coded trampoline address
Jens found the following crash/regression:

[    0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80
[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page

and

[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE

and bisected it to b24c2a9 ("x86: Move find_smp_config()
earlier and avoid bootmem usage").

It turns out the BIOS is using the first 64k for mptable,
without reserving it.

So try to find good range for the real-mode trampoline instead of
hard coding it, in case some bios tries to use that range for sth.

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4B21630A.6000308@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-11 09:28:22 +01:00
Thomas Gleixner
47a3d5da70 x86: Add early platform detection
Platforms like Moorestown require early setup and want to avoid the
call to reserve_ebda_region. The x86_init override is too late when
the MRST detection happens in setup_arch. Move the default i386
x86_init overrides and the call to reserve_ebda_region into a separate
function which is called as the default of a switch case depending on
the hardware_subarch id in boot params. This allows us to add a case
for MRST and let MRST have its own early setup function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 11:09:40 +02:00
Thomas Gleixner
816c25e7d4 x86: Add reserve_ebda_region to x86_init_ops
reserve_ebda_region needs to be called befor start_kernel. Moorestown
needs to override it. Make it a x86_init_ops function and initialize
it with the default reserve_ebda_region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Jeremy Fitzhardinge
93dbda7cbc x86: add brk allocation for very, very early allocations
Impact: new interface

Add a brk()-like allocator which effectively extends the bss in order
to allow very early code to do dynamic allocations.  This is better than
using statically allocated arrays for data in subsystems which may never
get used.

The space for brk allocations is in the bss ELF segment, so that the
space is mapped properly by the code which maps the kernel, and so
that bootloaders keep the space free rather than putting a ramdisk or
something into it.

The bss itself, delimited by __bss_stop, ends before the brk area
(__brk_base to __brk_limit).  The kernel text, data and bss is reserved
up to __bss_stop.

Any brk-allocated data is reserved separately just before the kernel
pagetable is built, as that code allocates from unreserved spaces
in the e820 map, potentially allocating from any unused brk memory.
Ultimately any unused memory in the brk area is used in the general
kernel memory pool.

Initially the brk space is set to 1MB, which is probably much larger
than any user needs (the largest current user is i386 head_32.S's code
to build the pagetables to map the kernel, which can get fairly large
with a big kernel image and no PSE support).  So long as the system
has sufficient memory for the bootloader to reserve the kernel+1MB brk,
there are no bad effects resulting from an over-large brk.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-14 15:37:14 -07:00
Brian Gerst
8ce031972b x86: remove pda_init()
Impact: cleanup

Copy the code to cpu_init() to satisfy the requirement that the cpu
be reinitialized.  Remove all other calls, since the segments are
already initialized in head_64.S.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20 12:29:19 +09:00
Tejun Heo
004aa322f8 x86: misc clean up after the percpu update
Do the following cleanups:

* kill x86_64_init_pda() which now is equivalent to pda_init()

* use per_cpu_offset() instead of cpu_pda() when initializing
  initial_gs

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:20:26 +01:00
Tejun Heo
b12d8db8fb x86: make pda a percpu variable
[ Based on original patch from Christoph Lameter and Mike Travis. ]

As pda is now allocated in percpu area, it can easily be made a proper
percpu variable.  Make it so by defining per cpu symbol from linker
script and declaring it in C code for SMP and simply defining it for
UP.  This change cleans up code and brings SMP and UP closer a bit.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:20:03 +01:00
Tejun Heo
9939ddaff5 x86: merge 64 and 32 SMP percpu handling
Now that pda is allocated as part of percpu, percpu doesn't need to be
accessed through pda.  Unify x86_64 SMP percpu access with x86_32 SMP
one.  Other than the segment register, operand size and the base of
percpu symbols, they behave identical now.

This patch replaces now unnecessary pda->data_offset with a dummy
field which is necessary to keep stack_canary at its place.  This
patch also moves per_cpu_offset initialization out of init_gdt() into
setup_per_cpu_areas().  Note that this change also necessitates
explicit per_cpu_offset initializations in voyager_smp.c.

With this change, x86_OP_percpu()'s are as efficient on x86_64 as on
x86_32 and also x86_64 can use assembly PER_CPU macros.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:19:58 +01:00
Tejun Heo
1a51e3a0ae x86: fold pda into percpu area on SMP
[ Based on original patch from Christoph Lameter and Mike Travis. ]

Currently pdas and percpu areas are allocated separately.  %gs points
to local pda and percpu area can be reached using pda->data_offset.
This patch folds pda into percpu area.

Due to strange gcc requirement, pda needs to be at the beginning of
the percpu area so that pda->stack_canary is at %gs:40.  To achieve
this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is
added and used to reserve pda sized chunk at the start of the percpu
area.

After this change, for boot cpu, %gs first points to pda in the
data.init area and later during setup_per_cpu_areas() gets updated to
point to the actual pda.  This means that setup_per_cpu_areas() need
to reload %gs for CPU0 while clearing pda area for other cpus as cpu0
already has modified it when control reaches setup_per_cpu_areas().

This patch also removes now unnecessary get_local_pda() and its call
sites.

A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:19:46 +01:00
Tejun Heo
c8f3329a0d x86: use static _cpu_pda array
_cpu_pda array first uses statically allocated storage in data.init
and then switches to allocated bootmem to conserve space.  However,
after folding pda area into percpu area, _cpu_pda array will be
removed completely.  Drop the reallocation part to simplify the code
for soon-to-follow changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:19:40 +01:00
Tejun Heo
f32ff5388d x86: load pointer to pda into %gs while brining up a CPU
[ Based on original patch from Christoph Lameter and Mike Travis. ]

CPU startup code in head_64.S loaded address of a zero page into %gs
for temporary use till pda is loaded but address to the actual pda is
available at the point.  Load the real address directly instead.

This will help unifying percpu and pda handling later on.

This patch is mostly taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-16 14:19:26 +01:00
Tejun Heo
3e5d8f9784 x86: make percpu symbols zerobased on SMP
[ Based on original patch from Christoph Lameter and Mike Travis. ]

This patch makes percpu symbols zerobased on x86_64 SMP by adding
PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on
the percpu output section and using it in vmlinux_64.lds.S.  A new
PHDR is added as existing ones cannot contain sections near address
zero.  PERCPU_VADDR() also adds a new symbol __per_cpu_load which
always points to the vaddr of the loaded percpu data.init region.

The following adjustments have been made to accomodate the address
change.

* code to locate percpu gdt_page in head_64.S is updated to add the
  load address to the gdt_page offset.

* __per_cpu_load is used in places where access to the init data area
  is necessary.

* pda->data_offset is initialized soon after C code is entered as zero
  value doesn't work anymore.

This patch is mostly taken from Mike Travis' "x86_64: Base percpu
variables at zero" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 14:19:14 +01:00
Ravikiran G Thirumalai
26799a6311 x86: fix incorrect __read_mostly on _boot_cpu_pda
The pda rework (commit 3461b0af02)
to remove static boot cpu pdas introduced a performance bug.

_boot_cpu_pda is the actual pda used by the boot cpu and is definitely
not "__read_mostly" and ended up polluting the read mostly section with
writes.  This bug caused regression of about 8-10% on certain syscall
intensive workloads.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Acked-by: Mike Travis <travis@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-02 17:16:29 +01:00
Rafael J. Wysocki
3e1e9002aa x86: change static allocation of trampoline area
Impact: fix trampoline sizing bug, save space

While debugging a suspend-to-RAM related issue it occured to me that
if the trampoline code had grown past 4 KB, we would have been
allocating too little memory for it, since the 4 KB size of the
trampoline is hardcoded into arch/x86/kernel/e820.c .  Change that
by making the kernel compute the trampoline size and allocate as much
memory as necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 13:49:45 +01:00
dcg
12544697f1 x86_64: be less annoying on boot, v2
Honour "quiet" boot parameter in early_printk() calls

Signed-off-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-29 10:04:53 +02:00
Bill Nottingham
f6476774f1 x86_64: be less annoying on boot
Remove mostly useless message on every boot.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-25 11:15:20 +02:00
Jan Beulich
66d4bdf22b x86-64: fix overlap of modules and fixmap areas
Plus add a build time check so this doesn't go unnoticed again.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 17:31:50 +02:00
Jeremy Fitzhardinge
5b09b2876e x86_64: add workaround for no %gs-based percpu
As a stopgap until Mike Travis's x86-64 gs-based percpu patches are
ready, provide workaround functions for x86_read/write_percpu for
Xen's use.

Specifically, this means that we can't really make use of vcpu
placement, because we can't use a single gs-based memory access to get
to vcpu fields.  So disable all that for now.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 10:58:13 +02:00
Yinghai Lu
28bb223795 x86: move reserve_setup_data to setup.c
Ying Huang would like setup_data to be reserved, but not included in the
no save range.

Here we try to modify the e820 table to reserve that range early.
also add that in early_res in case bootloader messes up with the ramdisk.

other solution would be
1. add early_res_to_highmem...
2. early_res_to_e820...
but they could reserve another type memory wrongly, if early_res has some
resource reserved early, and not needed later, but it is not removed from
early_res in time. Like the RAMDISK (already handled).

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: andi@firstfloor.org
Tested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:14 +02:00
Jeremy Fitzhardinge
f97013fd8f x86, 64-bit: split x86_64_start_kernel
Split x86_64_start_kernel() into two pieces:

   The first essentially cleans up after head_64.S.  It clears the
   bss, zaps low identity mappings, sets up some early exception
   handlers.

   The second part preserves the boot data, reserves the kernel's
   text/data/bss, pagetables and ramdisk, and then starts the kernel
   proper.

This split is so that Xen can call the second part to do the set up it
needs done.  It doesn't need any of the first part setups, because it
doesn't boot via head_64.S, and its redundant or actively damaging.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:11:06 +02:00
Ingo Molnar
2b4fa851b2 Merge branch 'x86/numa' into x86/devel
Conflicts:

	arch/x86/Kconfig
	arch/x86/kernel/e820.c
	arch/x86/kernel/efi_64.c
	arch/x86/kernel/mpparse.c
	arch/x86/kernel/setup.c
	arch/x86/kernel/setup_32.c
	arch/x86/mm/init_64.c
	include/asm-x86/proto.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 11:59:23 +02:00
Mike Travis
5deb0b2a25 x86: leave initial __cpu_pda array in place until cpus are booted
Ingo Molnar wrote:
...
> they crashed after about 3 randconfig iterations with:
>
>   early res: 4 [8000-afff] PGTABLE
>   early res: 5 [b000-b87f] MEMNODEMAP
> PANIC: early exception 0e rip 10:ffffffff8077a150 error 2 cr2 37
> Pid: 0, comm: swapper Not tainted 2.6.25-sched-devel.git-x86-latest.git #14
>
> Call Trace:
>  [<ffffffff81466196>] early_idt_handler+0x56/0x6a
>  [<ffffffff8077a150>] ? numa_set_node+0x30/0x60
>  [<ffffffff8077a129>] ? numa_set_node+0x9/0x60
>  [<ffffffff8147a543>] numa_init_array+0x93/0xf0
>  [<ffffffff8147b039>] acpi_scan_nodes+0x3b9/0x3f0
>  [<ffffffff8147a496>] numa_initmem_init+0x136/0x150
>  [<ffffffff8146da5f>] setup_arch+0x48f/0x700
>  [<ffffffff802566ea>] ? clockevents_register_notifier+0x3a/0x50
>  [<ffffffff81466a87>] start_kernel+0xd7/0x440
>  [<ffffffff81466422>] x86_64_start_kernel+0x222/0x280
...
Here's the fixup...  This one should follow the previous patches.

Thanks,
Mike
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-08 11:31:26 +02:00
Mike Travis
3461b0af02 x86: remove static boot_cpu_pda array v2
* Remove the boot_cpu_pda array and pointer table from the data section.
    Allocate the pointer table and array during init.  do_boot_cpu()
    will reallocate the pda in node local memory and if the cpu is being
    brought up before the bootmem array is released (after_bootmem = 0),
    then it will free the initial pda.  This will happen for all cpus
    present at system startup.

    This removes 512k + 32k bytes from the data section.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-08 11:31:25 +02:00
Huang, Ying
c45a707dbe x86: linked list of setup_data for i386
This patch adds linked list of struct setup_data supported for i386.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: andi@firstfloor.org
Cc: mingo@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-05 15:10:02 +02:00
Huang, Ying
0c51a965ed x86: extract common part of head32.c and head64.c into head.c
This patch extracts the common part of head32.c and head64.c into head.c.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: andi@firstfloor.org
Cc: mingo@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-05 15:10:02 +02:00
Huang, Ying
8b664aa66e x86, boot: add linked list of struct setup_data
This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26 21:34:42 +02:00
Akinobu Mita
356fa0c6e1 x86: use get_bios_ebda()
Use get_bios_ebda().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:47 +02:00
Yinghai Lu
2b8106a0a3 x86_64: do not reserve ramdisk two times
ramdisk is reserved via reserve_early in x86_64_start_kernel,
later early_res_to_bootmem() will convert to reservation in bootmem.

so don't need to reserve that again.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
Andi Kleen
5524ea320d x86: don't set up early exception handlers for external interrupts
All of early setup runs with interrupts disabled, so there is no
need to set up early exception handlers for vectors >= 32

This saves some minor text size.

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:29 +02:00
Alexander van Heukelum
ecd94c0809 x86: reserve end-of-conventional-memory to 1MB, 64-bit, use paravirt_enabled
Jeremy Fitzhardinge pointed out that looking at the boot_params
struct to determine if the system is running in a paravirtual
environment is not reliable for the Xen case, currently. He also
points out that there already exists a function to determine if
the system is running in a paravirtual environment. So let's use
that instead. This gets rid of the preprocessor test too.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:52 +02:00
Alexander van Heukelum
320a6b2efc x86: reserve end-of-conventional-memory to 1MB, 64-bit
This patch is an add-on to the 64-bit ebda patch. It makes
the functions reserve_ebda_region (renamed from reserve_ebda)
and copy_e820_map equal to the 32-bit versions of the previous
patch.

Changes:

Use u64 and u32 for local variables in copy_e820_map.

The amount of conventional memory and the start of the EBDA are
detected by reading the BIOS data area directly. Paravirtual
environments do not provide this area, so we bail out early
in that case. They will just have to set up a correct memory
map to start with.

Add a safety net for zeroed out BIOS data area.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:52 +02:00
Alexander van Heukelum
f6eb62b692 x86: reserve_early end-of-conventional-memory to 1MB, 64-bit
Explicitly reserve_early the whole address range from the end of
conventional memory as reported by the bios data area up to the
1Mb mark. Regard the info retrieved from the BIOS data area with
a bit of paranoia, though, because some biosses forget to register
the EBDA correctly.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:52 +02:00
Ingo Molnar
b4e0409a36 x86: check vmlinux limits, 64-bit
these build-time and link-time checks would have prevented the
vmlinux size regression.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:45 +02:00
Thomas Gleixner
31eedd823c x86: zap invalid and unused pmds in early boot
The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting
from __START_KERNEL_map. The kernel itself only needs _text to _end
mapped in the high alias. On relocatible kernels the ASM setup code
adjusts the compile time created high mappings to the relocation. This
creates invalid pmd entries for negative offsets:

0xffffffff80000000 -> pmd entry: ffffffffff2001e3
It points outside of the physical address space and is marked present.

This starts at the virtual address __START_KERNEL_map and goes up to
the point where the first valid physical address (0x0) is mapped.

Zap the mappings before _text and after _end right away in early
boot. This removes also the invalid entries.

Furthermore it simplifies the range check for high aliases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-18 20:54:14 +01:00
Yinghai Lu
25eff8d4cd x86_64: add debug name for early_res
helps debugging problems in this rather murky area of code.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01 17:49:41 +01:00
Ingo Molnar
cd58289667 x86: fix more non-global TLB flushes
fix more __flush_tlb() instances, out of caution.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:54 +01:00
Andi Kleen
7517527891 x86: replace hard coded reservations in 64-bit early boot code with dynamic table
On x86-64 there are several memory allocations before bootmem. To avoid
them stomping on each other they used to be all hard coded in bad_area().
Replace this with an array that is filled as needed.

This cleans up the code considerably and allows to expand its use.

Cc: peterz@infradead.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:17 +01:00
Ingo Molnar
076f9776f5 x86: make early printk selectable on 64-bit as well
Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well.

saves ~2K:

   text    data     bss     dec     hex filename
   7290283 3672091 1907848 12870222         c4624e vmlinux.before
   7288373 3671795 1907848 12868016         c459b0 vmlinux.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:06 +01:00
Roland McGrath
8866cd9dc9 x86: early_idt_handler improvements, 64-bit
It's not too pretty, but I found this made the "PANIC: early exception"
messages become much more reliably useful: 1. print the vector number,
2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:06 +01:00
Yinghai Lu
9de819fe72 x86: do not set boot cpu in cpu_online_map at x86_64_start_kernel()
In init/main.c boot_cpu_init() does that later.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:46 +01:00
Thomas Gleixner
eaf76e8b93 x86: remove duplicate start_kernel declaration
start_kernel is already declared in a generic header file.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:19 +01:00
Thomas Gleixner
718fc13b46 x86: move debug related declarations to kdebug.h
Move them and fixup some users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:17 +01:00
Glauber de Oliveira Costa
9d1c6e7c86 x86: use descriptor's functions instead of inline assembly
This patch provides a new set of functions for managing the descriptor
tables that can be used instead of putting the raw assembly in .c files.

Remodeling of store_tr() suggested by Frederik Deweerdt.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-19 20:35:03 +02:00
H. Peter Anvin
30c826451d [x86] remove uses of magic macros for boot_params access
Instead of using magic macros for boot_params access, simply use the
boot_params structure.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-16 17:38:31 -07:00
Dave Jones
835c34a168 Delete filenames in comments.
Since the x86 merge, lots of files that referenced their own filenames
are no longer correct.  Rather than keep them up to date, just delete
them, as they add no real value.

Additionally:
- fix up comment formatting in scx200_32.c
- Remove a credit from myself in setup_64.c from a time when we had no SCM
- remove longwinded history from tsc_32.c which can be figured out from
  git.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 10:01:23 -07:00
Thomas Gleixner
250c22777f x86_64: move kernel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:24 +02:00
Renamed from arch/x86_64/kernel/head64.c (Browse further)