Commit Graph

5056 Commits (2c6a3f72688acbc640b3be8083dac0e90354f0cf)

Author SHA1 Message Date
Dhananjay Phadke 2c6a3f7268 netxen: drop redudant spinlock
Some leftover code that makes use of adapter->lock in tx_timeout function,
which resets the interface under this lock. In close() when the workqueue
is flushed, prints the warning about sleeping with interrupts disabled
(when spinlock debug is enabled). The lock was required with private netxen
IOCTLs, which were removed a while ago.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30 15:52:00 -04:00
dhananjay@netxen.com e01872af1d netxen: Fix interrupt handling for multiport adapters
This patch fixes masking of interrupts on multiport adapters. Also disables
interrupts upon ifdown interface. The wrong mask could result in interrupt
flood after interface is down.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30 15:51:59 -04:00
dhananjay@netxen.com 7eec517c44 netxen: re-init station address after h/w init
This is a workaround for firmware bug with 2nd port of multiport adapter,
where MAC address is reset. Driver just needs to overwrite it with the
value read from PROM.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30 15:51:59 -04:00
Ayaz Abdulla ef756b3e56 forcedeth: mac address correct
In older chipsets, the mac address was stored in reversed order.
However, in newer chipsets, the mac address is in correct order. This
patch takes those newer chipsets into account and does not rely on a
special bit setup by BIOS'.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30 15:50:17 -04:00
Kumar Gala b9daf6c0ff gfar: Fix modpost warning
Fix the following modpost warning:

WARNING: vmlinux.o(.init.text+0x1aa6c): Section mismatch: reference to .exit.text:gfar_mdio_exit (between 'gfar_init' and 'gfar_mdio_init')

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30 15:48:16 -04:00
Jarek Poplawski 55b7b629b7 lib8390: comment on locking by Alan Cox
Additional explanation of problems with locking by Alan Cox.

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30 15:47:20 -04:00
Micah Gruber 9351982b25 Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c
This patch fixes a potential null dereference bug where we dereference
pegasus before a null check. This patch simply moves the dereferencing
after the null check.

Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30 15:44:50 -04:00
Mike Cruse b8a94b3dec setup and detect 2nd phy on MCF5275 in FEC driver
Added code to recognize the second interface on M5275 boards.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 10:52:09 -07:00
Greg Ungerer f861d62e12 clean up reading of ICR register in FEC driver
On the MCF5272, there is no need to read the ICR before writing it :
the bit 4n+3 is a write-enable for the bits 4n,4n+1 and 4n+2.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 10:52:09 -07:00
Greg Ungerer cb84d6e7ad fix work queues in FEC driver
Fix the work queue code in the FEC driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 10:52:09 -07:00
Greg Ungerer f0d3464f5c remove unused config symbol from FEC driver
Removed unused CONFIG symbol and its conditional code from FEC driver.
Pointed out by Robert P. J. Day <rpjday@mindspring.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 10:52:09 -07:00
Greg Ungerer 080853afe3 include cacheflush.h in FEC driver
Include cacheflush.h to get definitions for cache functions used
in this code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 10:49:31 -07:00
Rusty Russell 05ff09706b Make lguest compile with CONFIG_BLOCK=n and CONFIG_NET=n
Gabriel C reports lguest doesn't compile with CONFIG_BLOCK=n.  Fix this
by introducing a config var for the block device, which depends on
LGUEST && BLOCK.  Do the same for the net driver, rather then depending
gratuitously on CONFIG_NET.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 17:37:45 -07:00
Linus Torvalds 7b5573769f Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected
  Blackfin arch: add BF54x I2C/TWI TWI0 driver support
  Blackfin On-Chip RTC driver update for supporting BF54x
  Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)
  Blackfin arch: add error message when IRQ no available
  Blackfin arch: Initialize the exception vectors early in the boot process
  Blackfin arch: fix a compiling warning about dma-mapping
  Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere
  Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail.
  Blackfin arch: Load P0 before storing through it
  Blackfin arch: fix KGDB bug, dont forget last parameter.
  Blackfin arch: add selections for BF544 and BF542
  Blackfin arch: use bfin_read_SWRST() now that BF561 provides it
  Blackfin arch: setup aliases for some core Core A MMRs
2007-07-28 19:33:04 -07:00
Hirokazu Takata 4fc09385c7 m32r: Fix ei_tx_timeout() in drivers/net/lib8390.c
Change INT0 trigger mode from edge-sense mode to level-sense mode,
in order to fix the following timeout error:
  'NETDEV WATCHDOG: eth0: transmit timed out'.

This patch is required only for the Mappi platform.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Hitoshi Yamamoto <hitoshiy@linux-m32r.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:20 -07:00
Rusty Russell f56a384e98 lguest: documentation VII: FIXMEs
Documentation: The FIXMEs

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Rusty Russell e2c9784325 lguest: documentation III: Drivers
Documentation: The Drivers

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Al Viro c7b17cb13e ax88796 (address space): cast to unsigned long, not long
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Al Viro 1f41bb3a5a cxgb3 gfp_t annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Al Viro af3b162afd misannotation in pppol2tp
Address of auto variable is not a userland pointer.  A good thing, too,
since if pppol2tp_tunnel_getsockopt() would _really_ get a userland pointer
as argument, it would be an instant roothole...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Geert Uytterhoeven 88accb498f netdev: i82596 Ethernet needs <asm/cacheflush.h>
netdev: i82596 Ethernet needs <asm/cacheflush.h> on m68k

drivers/net/82596.c: In function 'init_rx_bufs':
drivers/net/82596.c:552: error: implicit declaration of function 'cache_clear'
drivers/net/82596.c: In function 'i596_start_xmit':
drivers/net/82596.c:1104: error: implicit declaration of function 'cache_push'

The driver still compiles on ia32 (CONFIG_APRICOT=y)

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:42 -04:00
Ayaz Abdulla 1398661b0d forcedeth: mcp73 device addition
This patch contains new device settings for MCP73 chipset.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:42 -04:00
Chris Snook 3d2557f681 atl1: make atl1_init_ring_ptrs static
Sparse (correctly) thinks this function should be static.  Make it so.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:42 -04:00
Jan-Bernd Themann 8d22c9711a eHEA: net_poll support
net_poll support for eHEA added

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:42 -04:00
Adrian Bunk dde9f93c20 drivers/net/acenic.c: fix check-after-use
The Coverity checker noted that we've already dereferenced "dev" when we
check whether it's NULL.

Since it's impossible that "dev" is NULL at this place this patch
removes the NULL check.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:41 -04:00
Maciej W. Rozycki fcdff13905 defxx: Use __maybe_unused rather than a local hack
This is a change to remove a local hack in favour to __maybe_unused that
has been recently added.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:41 -04:00
Andy Fleming 52cb1c2b70 Fix error checking in Vitesse IRQ config
phy_read() returns a negative number if there's an error, but the
error-checking code in the Vitesse driver's config_intr function
triggers if phy_read() returns non-zero.  Correct that.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:41 -04:00
Masakazu Mokuno fe6d3a4049 ps3: reduce allocation size of rx skb buffers
Reduced allocation size for rx skb buffers, from 2308 bytes to
1356 per buffer.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:41 -04:00
Jay Cliburn a3093d9b07 atl1: use kernel provided ethernet length constants
Use constants already provided by the kernel for ethernet related lengths.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:41 -04:00
Jay Cliburn ef76e3e250 atl1: fix typo in dma_req_block
s/dam/dma

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:41 -04:00
Jay Cliburn 91a500ac56 atl1: change cmb write threshold
Change the threshold number of descriptors used to trigger CMB writes.
The vendor reports that under certain conditions this will reduce the
number of unnecessary tx interrupts and improve rx performance.

This change is lifted directly from vendor version 1.2.40.2 of the L1
driver.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:41 -04:00
Jay Cliburn 3f516c00d4 atl1: fix typo in DMA engine setup
The DMA engine setup contains a typo that can result in an incorrect
dmaw_block setting.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:40 -04:00
Jay Cliburn e6a7ff4a61 atl1: change tpd_avail function name
Change tpd_avail() to atl1_tpd_avail().

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:40 -04:00
Masakazu Mokuno 583aae1094 ps3: fix rare issue that reenabling rx DMA fails
Fixed rare issue that 'lv1_net_start_rx_dma failed, status=-9" was shown
in dmesg.  This meant restarting rx DMA had been rejected by the hypervisor.
This issue would caused if the guest os requested starting DMA when
the hypervisor thought the DMA was in progress.
The state machine for DMA status of the hypervisor would be updated
by processing interrupt in the hypervisor.
Thus we should wait for the interrupt delivery before restarting
DMA.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:40 -04:00
Masakazu Mokuno 39a3d2d19c ps3: removed calling netif_poll_enable() in open()
Removed use of netif_poll_enable() in open function.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:40 -04:00
Masakazu Mokuno f0861f82d9 ps3: use ethX as the name of irq
Use net_device name for registration of irq as many network drivers do.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:40 -04:00
Masakazu Mokuno 92548d601c ps3: use net_device_stats of net_device structure
Removed the statistics information from private structre.
Instead, use net_device_stats in net_device structure.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:40 -04:00
Masakazu Mokuno 78f710dc18 ps3: removed conditional ethtool support
Removed conditional ethtool support.  Always enabled.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:39 -04:00
Masakazu Mokuno b3bd6fe96d ps3: removed defines no longer used
Removed defines no longer used.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:39 -04:00
Masakazu Mokuno 48544cc267 ps3: tx descriptor handling cleanup
gelic: TX descriptor handling cleanup

        - Emitted return value of NETDEV_TX_LOCKED when DMA map or kick
          failure.
          Now it would free the skb, update drop packet statistics
          and return OK. Requested from Jeff Garzik.
        - Enable tx queue if number of free descriptors are more than 2
        - Fixed descriptor leak if dma map for second descriptor failed
        - Stopped calling xmit handler from interrupt handler in order
          to recheck tx queue.  Instead, call appropriate helper functions.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:39 -04:00
Masakazu Mokuno ea6992aa1f ps3: some minor cleanups
- Removed the embarrassing definition which was used in only one
  place.
- Fixed wrong initialization of dmac_cmd_status.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:39 -04:00
Masakazu Mokuno 9f6c9a8c50 ps3: fix wrong calculation of rx descriptor address
Fixed the bug that calculation of the address of rx descriptor was
wrong.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:39 -04:00
dhananjay@netxen.com ceded32f09 netxen: Load firmware during probe, dma watchdog fix.
The firmware should be loaded after resetting hardware during PCI probe,
besides module unload. This fixes issue with 2nd port of multiport adapter
on powerpc blades. This patch also fixes a bug that PCI resources are not
freed if dma watchdog shutdown failed. The dma watchdog poll messages
during module unload are also suppressed.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Milan Bag <mbag@netxen.com>
Signed-off-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:39 -04:00
Li Yang 890de95e8f ucc_geth: add support to netif message level
Adds netif message level control to the ucc_geth driver.  The level can
be set by module parameter and ethtool.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:38 -04:00
Li Yang ac421852b3 ucc_geth: add ethtool support
The patch enables statistics in ucc_geth and adds ethtool support to
ucc_geth driver.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:28:38 -04:00
Linus Torvalds a5b4860b97 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Support small QP queues
  IB/ehca: Make internal_create/destroy_qp() static
  IB/ehca: Move ehca2ib_return_code() out of line
  IB/ehca: Generate async event when SRQ limit reached
  IB/ehca: Support large page MRs
  IB/mlx4: Fix error path in create_qp_common()
  mlx4_core: Change command token on timeout
  IB/mthca: Change command token on timeout
  IB/ipath: Remove ipath_layer dead code
  IB/mlx4: Fix leaks in __mlx4_ib_modify_qp
2007-07-22 11:45:17 -07:00
Linus Torvalds 7578634990 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits)
  [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410
  [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers
  [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h
  [ARM] 4521/2: S3C: Reorganise VA mapping headers
  [ARM] 4520/1: S3C: Remove old VA values from static map
  [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h
  [ARM] 4518/1: S3C: Rename watchdog configuration options
  [ARM] 4517/1: S3C: Fix debug macros for ARM926 output
  [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926
  [ARM] 4515/1: S3C: Move uncompress code to plat-s3c
  [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART
  [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT
  [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates
  [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support
  [ARM] 4510/1: S3C: split debug-macro support into plat-s3c
  [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c
  [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c
  [ARM] 4461/1: MXC platform and i.MX31ADS core support
  [ARM] 4507/1: pxa2xx clock_event_device
  [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later
  ...
2007-07-22 11:22:59 -07:00
Jan Engelhardt e0009820ed [NET]: Make NETDEVICES depend on NET.
Enabling drivers from "Devices > Networking" (in menuconfig), for 
example SLIP and/or PLIP, throws link time errors when CONFIG_NET itself 
is =n. Have CONFIG_NETDEVICES depend on CONFIG_NET.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-21 19:11:35 -07:00
Stephen Rothwell 43a415138d [IrDA]: TOSHIBA_FIR depends on virt_to_bus
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-21 19:08:13 -07:00
Samuel Ortiz e97e2ddf07 [IrDA]: EP7211 IR driver port to the latest SIR API
The EP7211 SIR driver was the only one left without a new SIR API port.

Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-21 19:07:33 -07:00