Commit graph

33 commits

Author SHA1 Message Date
Kirill Smelkov
b7589ac4ae V4L/DVB: bttv: Add another ids for IVC-200
I have 3 IVC-200 cards (with 4 video channels on each).

2 of the cards identify theirselves as 000[0-3]:a155 (ids already in
cardlist) and another one identifies itself as 080[0-3]:a155, which ids
were unknown so far.

Note - it's IVC-200, not IVC-200G.

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:58:29 -03:00
Alan McIvor
dceaddb978 V4L/DVB (11124): Add support for ProVideo PV-183 to bttv
Add support for ProVideo PV-183 to bttv

This patch adds support for the ProVideo PV-183 card to the bttv
device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint
Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels
available. There are no tuners on this card.

Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:31 -03:00
Hans Verkuil
ae6cfaace1 V4L/DVB (11044): v4l2-device: add v4l2_device_disconnect
Call v4l2_device_disconnect when the parent of a hotpluggable device
disconnects. This ensures that you do not have a pointer to a device that
is no longer present.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Jean-Francois Moine
71cb2764fc V4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Robert Millan
76ecf4599e V4L/DVB (10944): Conceptronic CTVFMI2 PCI Id
My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch
that adds its PCI id.

lspci -nnv output:

05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)

Press <break> within 3 seconds if this is wrong.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:17 -03:00
Bruno Christo
0c5db42551 V4L/DVB (10827): Add support for GeoVision GV-800(S)
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips.
It has 16 video inputs and 4 audio inputs, and it is almost identical
to the GV-800, as seen on http://bttv-gallery.de .
The only difference appears to be the analog mux, it has a CD22M3494
in place of the MT8816AP. The card has a blue PCB, as seen in this
picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg .

This card wasn't originally supported, and it was detected as
UNKNOWN/GENERIC. The video inputs weren't working, so I tried
"forcing" a few cards like the GeoVision GV-600, but there was still
no video. So I made a patch to support this card, based on the Kodicom
4400r.

The GV-800(S) is identified as follows:

...
02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)

...
02:00.0 0400: 109e:036e (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdfff000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:00.1 0480: 109e:0878 (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffe000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:04.0 0400: 109e:036e (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffd000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:04.1 0480: 109e:0878 (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffc000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:08.0 0400: 109e:036e (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffb000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:08.1 0480: 109e:0878 (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffa000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:0c.0 0400: 109e:036e (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff9000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:0c.1 0480: 109e:0878 (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff8000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

As you can see, the GV-800(S) card is almost identical to the GV-800
on bttv-gallery, so this patch might also work for that card. If not,
only a few changes should be required on the gv800s_write() function.

After this patch, the video inputs work correctly on linux 2.6.24 and
2.6.27 using the software 'motion'. The input order may seem a little
odd, but it's the order the original software/driver uses, and I decided
to keep that order to get the most out of the card.

I tried to get the audio working with the snd-bt87x module, but I only
get noise from every audio input, even after selecting a different mux
with alsamixer. Also, after trying to play sound from those sources, I
randomly get a RISC error about an invalid RISC opcode, and then that
output stops working. I also can't change the sampling rate when
recording. Any pointers to adding audio support are welcome.

Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:07 -03:00
Douglas Kosovic
ade0815c16 V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver
It's a quad Bt878 PCI-e x1 capture board that's basically the same as the
IVC-200 (quad Bt878 PCI) capture board that's currently supported in
the V4L2 bttv driver.

Manufacturer's web page for IVCE-8784 with photo and info:
  http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784

Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:26 -03:00
Dirk Heer
0558362571 V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones
This Patch does modify the bttv-cards.c and bttc.h so that the driver
supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from
Phytec Messtechnik GmbH.

Signed-off-by: Dirk Heer <d.heer@phytec.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:37 -02:00
Mauro Carvalho Chehab
7d341a6a52 V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FM
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil
(www.cdibrasil.com.br/) for sponsoring this development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-10-12 09:36:47 -02:00
Mauro Lacy
e80faad3d7 V4L/DVB (7368): bttv: added support for Kozumi KTV-01C card
Signed-off-by: Mauro Lacy <mauro@lacy.com.ar>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:51 -03:00
Ernesto Hernández-Novich
97275ac514 V4L/DVB (7366): Support for a 16-channel bt878 card
I have what looks like a Geovision GV-600 (or 650) card. It has a large
chip in the middle labeled

CONEXANT
FUSION 878A
25878-13
E345881.1
0312 TAIWAN

It has an audio connector coming out from a chip labeled

ATMEL
0242
AT89C2051-24PI

It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18)

...
01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
...
01:0a.0 0400: 109e:036e (rev 11)
        Subsystem: 008a:763c
        Flags: bus master, medium devsel, latency 64, IRQ 58
        Memory at dfffe000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

01:0a.1 0480: 109e:0878 (rev 11)
        Subsystem: 008a:763c
        Flags: bus master, medium devsel, latency 64, IRQ 58
        Memory at dffff000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18
kernel and the latest v4l-dvb drivers, but it did not work at all. The
card has sixteen (16) BNC video inputs, four of them on the board itself
and twelve on three daughter-cards. It has a single bt878 chip, no tuner
and what looks like and audio input. After doing some research I managed
to get only eight channels working by forcing card=125 and those DID NOT
match channels 0-7 on the card, and no audio.

Based on what was working for card=125, I added the card definition
block, added a specific muxsel routine and got the card working fully
with xawtv, where the sixteen channels show up as Composite0 to
Composite15, matching the channel labels in the card and daughter-cards.
I have made no efforts yet to get audio working, but would appreciate
any pointers.

Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:51 -03:00
Sascha Sommer
b5457b7bdf V4L/DVB (6249): Add Typhoon Tv-Tuner PCI to bttv-cards.c
Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:14:55 -03:00
Michael Krufky
27cb786f4e V4L/DVB (5803): Bttv: add support for DViCO FusionHDTV 2
add analog video support for DViCO FusionHDTV 2
Thanks to Todd Ignasiak for donating the card.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:26 -03:00
Mauro Carvalho Chehab
2d9078f73e V4L/DVB (5789): Fix 3dfx Voodoo entries on Cardlist
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:21 -03:00
Scott Alfter
1ebba670ed V4L/DVB (5497): Additional card support for bttv driver
SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our
surveillance, conferencing, and medical imaging systems.  The attached
relatively small patch adds support for these cards, which fall into two broad
* boards with one or more Bt878s, one or more composite inputs, and no S-video
  or tuner inputs
* boards with one Bt878, one composite input, one S-video input, and no tuner
  input

Signed-off-by: Scott Alfter <salfter@ssai.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 15:45:25 -03:00
Michael Krufky
19790db00b V4L/DVB (5061): Bt8xx: add support for Ultraview DVB-T Lite
Ultraview DVB-T Lite is a clone of DViCO FusionHDTV DVB-T Lite

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:19 -02:00
Mauro Carvalho Chehab
b3bd5be8d4 V4L/DVB (4209): Added some BTTV PCI IDs for newer boards
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 02:05:25 -03:00
Michael Krufky
52398efcfa V4L/DVB (4058): Bttv: add autodetection support for Osprey 230
- use eeprom data to detect Osprey 230

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25 02:05:03 -03:00
Julian Calaby
2d05ae6b5b V4L/DVB (3340): Add bttv card MagicTV (rebranded MachTV)
- Add bttv card MagicTV (rebranded MachTV)

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-11 19:40:09 -02:00
Steven Toth
cd1257d860 V4L (1023): Added Hauppauge ImpactVCB board
- Modifications to bttv to support the Hauppauge ImpactVCB product
(Model #64900).

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09 15:25:01 -02:00
Bill Pechter
633323ffff [PATCH] v4l:: (936) Support for sabrent bt848 version
Support for Sabrent bt848 version.

Signed-off-by: Bill Pechter <pechter@gmail.com>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:18 -08:00
nshmyrev@yandex.ru
71633c0572 [PATCH] v4l: 794: added asound skyeye bttv card
- Added Asound Skyeye bttv card.

Signed-off-by: Nickolay V. Shmyrev <<nshmyrev@yandex.ru>>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:19 -08:00
Michael Krufky
cf583ac40d [PATCH] v4l: 711: changed pll 1 to pll pll 28
- Changed { .pll = 1, } to { .pll = PLL_28, }

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:14 -08:00
Mauro Carvalho Chehab
10c2c8b18a [PATCH] v4l: 703: added new card prolink pixelview playtv mpeg2 pv m4900
- Added new card: Prolink PixelView PlayTV MPEG2 PV-M4900

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:13 -08:00
Mauro Carvalho Chehab
6589d36a07 [PATCH] v4l: 695: added more pci id
- Added more PCI ID.

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:13 -08:00
Mauro Carvalho Chehab
da57a5d905 [PATCH] v4l: 694: updated an entry to reflect changes on tuner-simple.c
- Updated an entry to reflect changes on tuner-simple.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:12 -08:00
Mauro Carvalho Chehab
caa812e4a5 [PATCH] v4l: 670: cardlist update
- Cardlist update.

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:10 -08:00
Ricardo Cerqueira
cc9d8d49bb [PATCH] v4l: 635: add bttv card 137 conceptronic ctvfmi v2
- Add bttv card 137 - Conceptronic CTVFMi v2

Signed-off-by: Ricardo Cerqueira <v4l\@cerqueira.org>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:07 -08:00
Mauro Carvalho Chehab
10c35cf8fd [PATCH] v4l: cx88-dvb incorrect reporting fixed and remove bad PCI ID for Sabrent
- cx88-dvb has been incorrectly reporting the card name instead of frontend name
- Removes a bad PCI subsystem ID for saa713x Sabrent card
- Renames DVICO --> DViCO for bttv.
- #include <linux/config.h> no longer needed.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:51 -07:00
Mauro Carvalho Chehab
24a70fdce8 [PATCH] v4l: BTTV updates and card additions
- Remove $Id CVS logs for V4L files
- Added DVICO FusionHDTV 5 Lite card.
- Added Acorp Y878F.
- CodingStyle fixes.
- Added tuner_addr to bttv cards structure.
- linux/version.h replaced by linux/utsname.h on bttvp.h
- kernel module for acquiring RDS data from a SAA6588.
- Allow multiple open() and reading calls to /dev/radio on bttv-driver.c
- added i2c address for lgdt330x.

Signed-off-by: Hans J. Koch <koch@hjk-az.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:49 -07:00
Mauro Carvalho Chehab
db036a07ac [PATCH] v4l: Documentation
- Card definitions updated.
- Tail spaces removed.
- Mark all 7135 cards as 7133.
- Correct info about sync byte for MPEG-2 transport stream packets.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: hermann pitton <hermann.pitton@onlinehome.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:01:05 -07:00
Mauro Carvalho Chehab
d81ef559da [PATCH] Video for Linux Documentation
This patch synchronizes documentation from V4L CVS with current kernel
release.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:06:38 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00