Commit graph

4272 commits

Author SHA1 Message Date
Linus Torvalds
28a4acb485 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  net: Added ASSERT_RTNL() to dev_open() and dev_close().
  can: Fix can_send() handling on dev_queue_xmit() failures
  netns: Fix arbitrary net_device-s corruptions on net_ns stop.
  netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol config values
  netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last request
  macvlan: Fix memleak on device removal/crash on module removal
  net/ipv4: correct RFC 1122 section reference in comment
  tcp FRTO: SACK variant is errorneously used with NewReno
  e1000e: don't return half-read eeprom on error
  ucc_geth: Don't use RX clock as TX clock.
  cxgb3: Use CAP_SYS_RAWIO for firmware
  pcnet32: delete non NAPI code from driver.
  fs_enet: Fix a memory leak in fs_enet_mdio_probe
  [netdrvr] eexpress: IPv6 fails - multicast problems
  3c59x: use netstats in net_device structure
  3c980-TX needs EXTRA_PREAMBLE
  fix warning in drivers/net/appletalk/cops.c
  e1000e: Add support for BM PHYs on ICH9
  uli526x: fix endianness issues in the setup frame
  uli526x: initialize the hardware prior to requesting interrupts
  ...
2008-05-08 19:03:26 -07:00
Jeff Garzik
54c852a2d6 Merge branch 'for-2.6.26' of git://git.farnsworth.org/dale/linux-2.6-mv643xx_eth into upstream 2008-05-06 12:22:03 -04:00
Denis V. Lunev
9185ef6787 [POWERPC] Assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.
No need to check for data!=NULL after that.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05 16:47:14 +10:00
Emil Medve
b41e5fffe8 [POWERPC] devres: Add devm_ioremap_prot()
We provide an ioremap_flags, so this provides a corresponding
devm_ioremap_prot.  The slight name difference is at Ben
Herrenschmidt's request as he plans on changing ioremap_flags to
ioremap_prot in the future.

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-05 16:47:14 +10:00
Christian Ehrhardt
de368dceb3 KVM: ppc: deliver INTERRUPT_FP_UNAVAIL to the guest
This patch adds the delivery of INTERRUPT_FP_UNAVAIL exceptions to the guest.
It's needed if a guest uses ppc binaries using the Floating point instructions.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:45 +03:00
Hollis Blanchard
45c5eb67da KVM: ppc: Handle guest idle by emulating MSR[WE] writes
This reduces host CPU usage when the guest is idle. However, the guest must
set MSR[WE] in its idle loop, which Linux did not do until 2.6.26.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-05-04 14:44:44 +03:00
Ulrich Drepper
d35c7b0e54 unified (weak) sys_pipe implementation
This replaces the duplicated arch-specific versions of "sys_pipe()" with
one unified implementation.  This removes almost 250 lines of duplicated
code.

It's marked __weak, so that *if* an architecture wants to override the
default implementation it can do so by simply having its own replacement
version, since many architectures use alternate calling conventions for
the 'pipe()' system call for legacy reasons (ie traditional UNIX
implementations often return the two file descriptors in registers)

I still haven't changed the cris version even though Linus says the BKL
isn't needed.  The arch maintainer can easily do it if there are really
no obstacles.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-03 13:50:33 -07:00
Linus Torvalds
c36c804559 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
  [POWERPC] PS3: Update ps3_defconfig
  [POWERPC] PS3: Remove unsupported wakeup sources
  [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
  [POWERPC] PS3: Add time include to lpm
  [POWERPC] Fix slb.c compile warnings
  [POWERPC] Xilinx: Fix compile warnings
  [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c
  [RAPIDIO] fix current kernel-doc notation
  [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
  Fix a potential issue in mpc52xx uart driver
  [POWERPC] mpc5200: Allow for fixed speed MII configurations
  [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-03 10:01:33 -07:00
Linus Torvalds
b66e1f11eb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] fix sysctl_nr_open bugs
  [PATCH] sanitize anon_inode_getfd()
  [PATCH] split linux/file.h
  [PATCH] make osf_select() use core_sys_select()
  [PATCH] remove horrors with irix tty ioctls handling
  [PATCH] fix file and descriptor handling in perfmon
2008-05-02 11:23:14 -07:00
Paul Mackerras
3b5750644b [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
This fixes a regression reported by Kamalesh Bulabel where a POWER4
machine would crash because of an SLB miss at a point where the SLB
miss exception was unrecoverable.  This regression is tracked at:

http://bugzilla.kernel.org/show_bug.cgi?id=10082

SLB misses at such points shouldn't happen because the kernel stack is
the only memory accessed other than things in the first segment of the
linear mapping (which is mapped at all times by entry 0 of the SLB).
The context switch code ensures that SLB entry 2 covers the kernel
stack, if it is not already covered by entry 0.  None of entries 0
to 2 are ever replaced by the SLB miss handler.

Where this went wrong is that the context switch code assumes it
doesn't have to write to SLB entry 2 if the new kernel stack is in the
same segment as the old kernel stack, since entry 2 should already be
correct.  However, when we start up a secondary cpu, it calls
slb_initialize, which doesn't set up entry 2.  This is correct for
the boot cpu, where we will be using a stack in the kernel BSS at this
point (i.e. init_thread_union), but not necessarily for secondary
cpus, whose initial stack can be allocated anywhere.  This doesn't
cause any immediate problem since the SLB miss handler will just
create an SLB entry somewhere else to cover the initial stack.

In fact it's possible for the cpu to go quite a long time without SLB
entry 2 being valid.  Eventually, though, the entry created by the SLB
miss handler will get overwritten by some other entry, and if the next
access to the stack is at an unrecoverable point, we get the crash.

This fixes the problem by making slb_initialize create a suitable
entry for the kernel stack, if we are on a secondary cpu and the stack
isn't covered by SLB entry 0.  This requires initializing the
get_paca()->kstack field earlier, so I do that in smp_create_idle
where the current field is initialized.  This also abstracts a bit of
the computation that mk_esid_data in slb.c does so that it can be used
in slb_initialize.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:45 +10:00
Geoff Levand
d9f2f3f537 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:45 +10:00
Geert Uytterhoeven
fdedb4caea [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
The routines ps3_virq_setup() and ps3_virq_destroy() are used
in only one file, so make them static.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:44 +10:00
Geoff Levand
bbea346062 [POWERPC] Fix slb.c compile warnings
Arrange for a syntax check to always be done on the powerpc/mm/slb.c
DBG() macro by defining it to pr_debug() for non-debug builds.

Also, fix these related compile warnings:

  slb.c:273: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'long unsigned int
  slb.c:274: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:44 +10:00
Kumar Gala
b17b8181c9 [POWERPC] Xilinx: Fix compile warnings
arch/powerpc/sysdev/xilinx_intc.c: In function 'xilinx_intc_init':
arch/powerpc/sysdev/xilinx_intc.c:111: warning: format '%08X' expects type 'unsigned int', but argument 2 has type 'resource_size_t'
drivers/char/xilinx_hwicap/xilinx_hwicap.c: In function 'hwicap_setup':
drivers/char/xilinx_hwicap/xilinx_hwicap.c:626: warning: cast to pointer from integer of different size
drivers/char/xilinx_hwicap/xilinx_hwicap.c:646: warning: format '%x' expects type 'unsigned int', but argument 6 has type 'resource_size_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-01 23:09:42 -05:00
Becky Bruce
128cf7f2eb [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c
When resource_size_t is larger than an int, the current code
generates a build warning.  Kill it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-01 23:02:16 -05:00
Randy Dunlap
9941d945f4 [RAPIDIO] fix current kernel-doc notation
Fix current (-git16) missing docbook/kernel-doc notation in RapidIO files.

Warning(linux-2.6.25-git16//include/linux/rio.h:187): No description found for parameter 'sys_size'
Warning(linux-2.6.25-git16//include/linux/rio.h:187): No description found for parameter 'phy_type'

Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:188): No description found for parameter 'mport'
Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:224): No description found for parameter 'mport'
Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:245): No description found for parameter 'mport'
Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:270): No description found for parameter 'mport'
Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:311): No description found for parameter 'mport'
Warning(linux-2.6.25-git16//arch/powerpc/sysdev/fsl_rio.c:996): No description found for parameter 'dev'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-01 23:01:54 -05:00
Anton Vorontsov
e598477a3a [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
This patch adds pcie node which is resposible for PCI-E x8 slot
functioning. Though, this was tested using only x1 SKY2 NIC.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-01 23:01:46 -05:00
Al Viro
9f3acc3140 [PATCH] split linux/file.h
Initial splitoff of the low-level stuff; taken to fdtable.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-01 13:08:16 -04:00
Roman Zippel
7fc5c78409 ntp: rename TICK_LENGTH_SHIFT to NTP_SCALE_SHIFT
As TICK_LENGTH_SHIFT is used for more than just the tick length, the name
isn't quite approriate anymore, so this renames it to NTP_SCALE_SHIFT.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:59 -07:00
Roman Zippel
074b3b8794 ntp: increase time_freq resolution
This changes time_freq to a 64bit value and makes it static (the only outside
user had no real need to modify it).  Intermediate values were already 64bit,
so the change isn't that big, but it saves a little in shifts by replacing
SHIFT_NSEC with TICK_LENGTH_SHIFT.  PPM_SCALE is then used to convert between
user space and kernel space representation.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:03:58 -07:00
Linus Torvalds
ec31b21241 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix crashkernel= handling when no crashkernel= specified
  [POWERPC] Make emergency stack safe for current_thread_info() use
  [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h
  [POWERPC] spufs: trace spu_acquire_saved events
  [POWERPC] spufs: fix marker name for find_victim
  [POWERPC] spufs: add marker for destroy_spu_context
  [POWERPC] spufs: add sputrace marker parameter names
  [POWERPC] spufs: add context switch notification log
  [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200
  [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format
  [POWERPC] mpc5200: Fix FEC error handling on FIFO errors
  [POWERPC] mpc5200: add Phytec pcm030 board support
  [POWERPC] mpc5200: add gpiolib support for mpc5200
  [POWERPC] mpc5200: add interrupt type function
  [POWERPC] mpc5200: Fix unterminated of_device_id table
2008-04-30 08:37:40 -07:00
Samuel Thibault
f7511d5f66 Basic braille screen reader support
This adds a minimalistic braille screen reader support.  This is meant to
be used by blind people e.g.  on boot failures or when / cannot be mounted
etc and thus the userland screen readers can not work.

[akpm@linux-foundation.org: fix exports]
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jiri Kosina <jikos@jikos.cz>
Cc: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:52 -07:00
Jason Jin
aecb2b6eac [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-30 05:45:53 -05:00
Michael Ellerman
eabd90944b [POWERPC] Fix crashkernel= handling when no crashkernel= specified
Commit edd8ce6743 (Use extended crashkernel
command line on ppc64), changed the logic in reserve_crashkernel()
which deals with the crashkernel= command line option.

This introduced a bug in the case when there is no crashkernel= option,
or it is incorrect.  We would fall through and calculate the crash_size
based on the existing values in crashk_res.  If both start and end are 0,
the default, we calculate the crash_size as 1 byte - which is wrong.

Rework the logic so that we use crashk_res, regardless of whether it's
set by the command line or via the device tree (see prom.c).  Then check
if we have an empty range (end == start), and if so make sure to set
both end and start to zero (this is checked in machine_kexec_64.c).  Then
we calculate the crash_size once we know we have a non-zero range.

Finally we always want to warn the user if they specify a base != 32MB,
so remove the special case for that in the command line parsing case.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-30 19:49:48 +10:00
Michael Ellerman
3243d87441 [POWERPC] Make emergency stack safe for current_thread_info() use
The current_thread_info() macro, used by preempt_count(), assumes the
base address and size of the stack are THREAD_SIZE aligned.

The emergency stack currently isn't either of these things, which
could potentially cause problems anytime we're running on the
emergency stack.  That includes when we detect a bad kernel stack
pointer, and also during early_setup_secondary().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-30 19:49:48 +10:00
Paul Mackerras
595f403c1a Merge git://git.kernel.org/pub/scm/linux/kernel/git/jk/spufs 2008-04-30 16:53:17 +10:00
Kumar Gala
d0eb801c60 [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 16:29:30 +10:00
Julio M. Merino Vidal
3734dfc68b [POWERPC] spufs: trace spu_acquire_saved events
The sputrace module contained a trace entry for spu_acquire_saved, but
this marker was not placed anywhere. Fix this by adding a marker to the
routine.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:21:17 +10:00
Julio M. Merino Vidal
8a476d4955 [POWERPC] spufs: fix marker name for find_victim
Fix a typo in the marker for the find_victim function, which prevented
it from being traced. It previously read find_vitim.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:16:14 +10:00
Julio M. Merino Vidal
534578816f [POWERPC] spufs: add marker for destroy_spu_context
The sputrace module contained a reference to a marker for
destroy_spu_context, but this marker did not appear in the code. Fix
this by adding a marker in the function.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:12:30 +10:00
Julio M. Merino Vidal
d6508aaf27 [POWERPC] spufs: add sputrace marker parameter names
The markers facility defines the marker parameters to be of the form
'name %format'. Add parameter names to sputrace, to specify the context
and %spu paramerters,  instead of just specifying the '%format' part.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:06:39 +10:00
Christoph Hellwig
5158e9b521 [POWERPC] spufs: add context switch notification log
There are userspace instrumentation tools that need to monitor spu
context switches. This patch adds a new file called 'switch_log' to
each spufs context directory that can be used to monitor the context
switches.

Context switch in/out and exit from spu_run are monitored after the
file was first opened and can be read from it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-04-30 15:01:54 +10:00
Jean Delvare
3760f73671 i2c: Convert most new-style drivers to use module aliasing
Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29 23:11:40 +02:00
Linus Torvalds
867a89e0b7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [RAPIDIO] Change RapidIO doorbell source and target ID field to 16-bit
  [RAPIDIO] Add RapidIO connection info print out and re-training for broken connections
  [RAPIDIO] Add serial RapidIO controller support, which includes MPC8548, MPC8641
  [RAPIDIO] Add RapidIO node probing into MPC86xx_HPCN board id table
  [RAPIDIO] Add RapidIO node into MPC8641HPCN dts file
  [RAPIDIO] Auto-probe the RapidIO system size
  [RAPIDIO] Add OF-tree support to RapidIO controller driver
  [RAPIDIO] Add RapidIO multi mport support
  [RAPIDIO] Move include/asm-ppc/rio.h to asm-powerpc
  [RAPIDIO] Add RapidIO option to kernel configuration
  [RAPIDIO] Change RIO function mpc85xx_ to fsl_
  [POWERPC] Provide walk_memory_resource() for powerpc
  [POWERPC] Update lmb data structures for hotplug memory add/remove
  [POWERPC] Hotplug memory remove notifications for powerpc
  [POWERPC] windfarm: Add PowerMac 12,1 support
  [POWERPC] Fix building of pmac32 when CONFIG_NVRAM=m
  [POWERPC] Add IRQSTACKS support on ppc32
  [POWERPC] Use __always_inline for xchg* and cmpxchg*
  [POWERPC] Add fast little-endian switch system call
2008-04-29 08:19:14 -07:00
Christoph Lameter
d4d298feea ppc/powerpc: use kbuild.h instead of defining macros in asm-offsets.c
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:30 -07:00
Denis V. Lunev
667471386d powerpc: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Add correct ->owner to proc_fops to fix reading/module unloading race.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
Bartlomiej Sieka
8222525216 [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200
Board-specific defconfigs based on current mpc5200_defconfig, archival
lite5200_defconfig, and [cm5200|motionpro|tqm5200]_defconfig from the
linux-2.6-denx tree. Kernels build using these defconfigs were verified
to boot with root filesystem mounted over NFS on Motion-PRO, TQM5200
and Lite5200B boards. CM5200 target was not tested due to hardware
unavailability.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:19:14 -06:00
Grant Likely
a2884f37b6 [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:19:07 -06:00
s.hauer@pengutronix.de
106757b38f [POWERPC] mpc5200: add Phytec pcm030 board support
Add board support for the Phytec pcm030 mpc5200b based board. It
does not need any platform specific fixups and as such is handled
as a mpc5200 simple platform.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:17:12 -06:00
s.hauer@pengutronix.de
3cd2550c73 [POWERPC] mpc5200: add gpiolib support for mpc5200
This patch adds gpiolib support for mpc5200 SOCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:16:59 -06:00
Sascha Hauer
f800ab44f5 [POWERPC] mpc5200: add interrupt type function
Add a set_type function for external (GPIO) interrupts.

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:16:35 -06:00
Zhang Wei
6c39103ce5 [RAPIDIO] Change RapidIO doorbell source and target ID field to 16-bit
Change RapidIO doorbell source and target ID field to 16-bit for
support large system size, which max rio devid is 65535.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:29 +10:00
Zhang Wei
7f620df839 [RAPIDIO] Add RapidIO connection info print out and re-training for broken connections
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:29 +10:00
Zhang Wei
61b269179d [RAPIDIO] Add serial RapidIO controller support, which includes MPC8548, MPC8641
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:29 +10:00
Zhang Wei
182e143bee [RAPIDIO] Add RapidIO node probing into MPC86xx_HPCN board id table
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:29 +10:00
Zhang Wei
56fde1ff69 [RAPIDIO] Add RapidIO node into MPC8641HPCN dts file
This adds properties describing the RapidIO controller to the
device-tree source for the MPC8641HPCN board.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:28 +10:00
Zhang Wei
e042323607 [RAPIDIO] Auto-probe the RapidIO system size
The RapidIO system size will auto probe in RIO setup.  The route table
and rionet_active in rionet.c are changed to be allocated dynamically
according to the size of the system.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:28 +10:00
Zhang Wei
cc2bb6968a [RAPIDIO] Add OF-tree support to RapidIO controller driver
This initializes the RapidIO controller driver using addresses and
interrupt numbers obtained from the firmware device tree, rather than
using hardcoded constants.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:28 +10:00
Zhang Wei
ad1e9380b1 [RAPIDIO] Add RapidIO multi mport support
The original RapidIO driver suppose there is only one mpc85xx RIO controller
in system.  So, some data structures are defined as mpc85xx_rio global, such
as 'regs_win', 'dbell_ring', 'msg_tx_ring'.  Now, I changed them to mport's
private members.  And you can define multi RIO OF-nodes in dts file for multi
RapidIO controller in one processor, such as PCI/PCI-Ex host controllers in
Freescale's silicon.  And the mport operation function declaration should be
changed to know which RapidIO controller is target.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:28 +10:00
Zhang Wei
f1f389d558 [RAPIDIO] Add RapidIO option to kernel configuration
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:27 +10:00