Commit graph

1503 commits

Author SHA1 Message Date
Anton Vorontsov
24d481ecae 8250: Now honours baud rate lower bounds
A platform clock drives 8250 ports in most SOC systems, the clock
might run at high frequencies, and so it's not always possible to
downscale uart clock to a desired value.

Currently the 8250 uart driver accepts not supported baud rates, and
what is worse, it is doing this silently, and then passes not accepted
values to a new termios, so userspace has no chance to catch this kind
of errors (userspace verifies that settings were accepted by reading
back and comparing the settings).

This patch fixes the issue by passing minimum baud rate to the
uart_get_baud_rate() call, the call should take care of all bounds,
so userspace should now report:

  # stty -F /dev/ttyS0 speed 300
  115200
  stty: /dev/ttyS0: unable to perform all requested operations

p.s. uart_get_baud_rate() falls back to 9600, which still might be too
     low for some 10 GHz platforms, but that's a separate issue, and
     we can wait with fixing this till we find such a platform.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:20 -07:00
Vikram Pandita
1c2f04937b serial: 8250: add IRQ trigger support
There is currently no provision for passing IRQ trigger flags for
serial IRQs with triggering requirements (such as GPIO IRQs)

This patch adds irqflags to plat_serial8250_port that can be passed
from board file to reqest_irq() of 8250 driver

Changes are backward compatible with boards passing UPF_SHARE_IRQ flag

Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq

[Moved new flag to end to fix bugs in the original with the old_serial array
	-- Alan]

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:19 -07:00
Roel Kluin
1607acaec3 tty: icom: bit and/or confusion?
Previously, if any bit other than CMD_SND_BREAK was set, CMD_SND_BREAK
was not unset.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:11 -07:00
Wolfram Sang
7a4b23104b tty: serial/pcmcia: add ID for Advantech card
Add ID as reported in:

http://lists.infradead.org/pipermail/linux-pcmcia/2009-May/006127.html

Reported-by: Kenneth Moorman <KMoorman@transy.edu>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:10 -07:00
Mike Frysinger
0271edd4b1 serial: bfin_5xx: fix building as module when early printk is enabled
Since early printk only makes sense/works when the serial driver is built
into the kernel, disable the option for this driver when it is going to be
built as a module.  Otherwise we get build failures due to the ifdef
handling.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:09 -07:00
Linus Torvalds
515b696b28 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits)
  sh: mach-ecovec24: Add user debug switch support
  sh: Kill off unused se_skipped in alignment trap notification code.
  sh: Wire up HAVE_SYSCALL_TRACEPOINTS.
  video: sh_mobile_lcdcfb: use both register sets for display panning
  video: sh_mobile_lcdcfb: implement display panning
  sh: Fix up sh7705 flush_dcache_page() build.
  sh: kfr2r09: document the PLL/FLL <-> RF relationship.
  sh: mach-ecovec24: need asm/clock.h.
  sh: mach-ecovec24: deassert usb irq on boot.
  sh: Add KEYSC support for EcoVec24
  sh: add kycr2_delay for sh_keysc
  sh: cpufreq: Include CPU id in info messages.
  sh: multi-evt support for SH-X3 proto CPU.
  sh: clkfwk: remove bogus set_bus_parent() from SH7709.
  sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)
  sh: Add EcoVec24 romImage defconfig
  sh: USB disable process is needed if romImage boot for EcoVec24
  sh: EcoVec24: add HIZA setting for LED
  sh: EcoVec24: write MAC address in boot
  sh: Add romImage support for EcoVec24
  ...
2009-09-18 09:43:09 -07:00
Linus Torvalds
fa877c71e2 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Clean up linker script using standard macros.
  [IA64] Use standard macros for page-aligned data.
  [IA64] Use .ref.text, not .text.init for start_ap.
  [IA64] sgi-xp: fix printk format warnings
  [IA64] ioc4_serial: fix printk format warnings
  [IA64] mbcs: fix printk format warnings
  [IA64] pci_br, fix infinite loop in find_free_ate()
  [IA64] kdump: Short path to freeze CPUs
  [IA64] kdump: Try INIT regardless of
  [IA64] kdump: Mask INIT first in panic-kdump path
  [IA64] kdump: Don't return APs to SAL from kdump
  [IA64] kexec: Unregister MCA handler before kexec
  [IA64] kexec: Make INIT safe while transition to
  [IA64] kdump: Mask MCA/INIT on frozen cpus

Fix up conflict in arch/ia64/kernel/vmlinux.lds.S as per Tony's
suggestion.
2009-09-18 09:33:07 -07:00
Linus Torvalds
f205ce83a7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits)
  be2net: fix some cmds to use mccq instead of mbox
  atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA
  pkt_sched: Fix qstats.qlen updating in dump_stats
  ipv6: Log the affected address when DAD failure occurs
  wl12xx: Fix print_mac() conversion.
  af_iucv: fix race when queueing skbs on the backlog queue
  af_iucv: do not call iucv_sock_kill() twice
  af_iucv: handle non-accepted sockets after resuming from suspend
  af_iucv: fix race in __iucv_sock_wait()
  iucv: use correct output register in iucv_query_maxconn()
  iucv: fix iucv_buffer_cpumask check when calling IUCV functions
  iucv: suspend/resume error msg for left over pathes
  wl12xx: switch to %pM to print the mac address
  b44: the poll handler b44_poll must not enable IRQ unconditionally
  ipv6: Ignore route option with ROUTER_PREF_INVALID
  bonding: make ab_arp select active slaves as other modes
  cfg80211: fix SME connect
  rc80211_minstrel: fix contention window calculation
  ssb/sdio: fix printk format warnings
  p54usb: add Zcomax XG-705A usbid
  ...
2009-09-17 20:53:52 -07:00
Paul Mundt
ea88023b34 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	arch/sh/kernel/vmlinux.lds.S
2009-09-16 13:48:32 +09:00
Randy Dunlap
0e12ddf132 [IA64] ioc4_serial: fix printk format warnings
drivers/serial/ioc4_serial.c:943: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'long long unsigned int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Pat Gefre <pfg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-09-15 08:42:47 -07:00
Ken Kawasaki
531afd64d0 pcnet_cs: add cis of Linksys multifunction pcmcia card
pcnet_cs,serial_cs:
 
add cis of Linksys lan&modem mulitifunction pcmcia card
and some modem card(MT5634ZLX, RS-COM-2P).

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 02:42:25 -07:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
cf7a2b4fb6 Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and 'w90x900' into devel 2009-09-12 12:01:34 +01:00
Mike Rapoport
bf56c751fa [ARM] pxa: update pxa serial driver to use 'struct dev_pm_ops'
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 19:15:36 +08:00
Dick Hollenbeck
c47a830c08 ARM: 5688/1: ks8695_serial: disable_irq() lockup
disable_irq() cannot be called from interrupt context without self imposed deadlock. This was happening in ks8695uart_stop_tx().

Signed-off-by: Dick Hollenbeck <dick@softplc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02 17:22:44 +01:00
Leo Chen
b736b89f8a ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver
Add suspend/resume functions to the AMBA pl011 serial driver.

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02 11:21:15 +01:00
Ingo Molnar
a090ca2c84 CRIS: fix defconfig build failure
The CRIS defconfig fails to build with:

  drivers/serial/crisv10.c: In function 'rs_wait_until_sent':
  drivers/serial/crisv10.c:3926: error: implicit declaration of function 'lock_kernel'
  drivers/serial/crisv10.c:3943: error: implicit declaration of function 'unlock_kernel'

Include smp_lock.h.

LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2009-08-31 18:38:16 +02:00
Paul Mundt
c3144fc46f Merge branches 'sh/hwblk' and 'sh/pm-runtime' 2009-08-23 18:04:07 +09:00
Paul Mundt
0858d9c0c5 Merge branch 'sh/hwblk' into sh/pm-runtime 2009-08-23 18:02:59 +09:00
Yoshihiro Shimoda
c01f0f1a4a sh: Add initial support for SH7757 CPU subtype
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21 17:25:47 +09:00
Russell King
29c08460d4 Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into devel-stable 2009-08-17 18:16:28 +01:00
Byungho Min
433a915fc6 ARM: S5PC100: UART and Serial
Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-16 23:24:37 +01:00
Russell King
590a94d934 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2009-08-15 16:49:31 +01:00
Ramax Lo
a219dc4d44 ARM: S3C64XX: serial: Fix a typo in Kconfig
The typo causes drivers/serial/s3c6400.c not being built for s3c6400 platform.

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14 00:43:46 +01:00
Paul Mundt
e290861f99 Merge branch 'sh/stable-updates' 2009-08-13 11:48:01 +09:00
Linus Torvalds
36b8659f93 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>
  ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH
  ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers
  ARM: S3C64XX: serial: Fix section mismatch warning
  ARM: S3C24XX: serial: Fix section mismatch warnings
  ARM: S3C: PWM fix for low duty cycle
  ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization
  ARM: 5627/1: Fix restoring of lr at the end of mcount
  ARM: 5624/1: Document cache aliasing region
  S3C64XX: Fix ARMCLK configuration
  S3C64XX: Fix get_rate() for ARMCLK
  S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip
  mx3 defconfig update
  mx27 defconfig update
  ARM: 5623/1: Treo680: ir shutdown typo fix
  ARM: includecheck fix: plat-stmp3xxx/pinmux.c
  ARM: includecheck fix: plat-s3c64xx/pm.c
  ARM: includecheck fix: mach-omap2/mcbsp.c
  ARM: includecheck fix: mach-omap1/mcbsp.c
  ARM: includecheck fix: board-sffsdr.c
  ...
2009-08-07 10:46:51 -07:00
Sascha Hauer
37d6fb629e i.MX serial: do not use #ifdef CONFIG_ARCH_*
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:53 +02:00
Andrew Victor
0a51810aa0 ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers
Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer
to a KS8695_CLOCK_RATE.
Issue pointed out by Russell King on arm-linux-kernel mailing list.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05 22:06:56 +01:00
Linus Torvalds
e1ca4aed11 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
  powerpc/86xx: Update GE Fanuc sbc310 default configuration
  powerpc/86xx: Update defconfig for GE Fanuc's PPC9A
  cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.c
  powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards
  powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards
  powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards
  powerpc/mm: Fix SMP issue with MMU context handling code
2009-07-30 16:45:20 -07:00
Ramax Lo
909db80297 ARM: S3C64XX: serial: Fix section mismatch warning
Rename the structure to avoid the following warning:

WARNING: vmlinux.o(.data+0x11ef4): Section mismatch in reference from the variable
s3c6400_serial_drv to the function .devexit.text:s3c24xx_serial_remove()
The variable s3c6400_serial_drv references
the function __devexit s3c24xx_serial_remove()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:56:41 +01:00
Ramax Lo
8fe70a5f71 ARM: S3C24XX: serial: Fix section mismatch warnings
During kernel build process, the following warning was found:

WARNING: drivers/serial/built-in.o(.data+0x304): Section mismatch in reference from
the variable s3c2440_serial_drv to the function .devexit.text:s3c24xx_serial_remove()
The variable s3c2440_serial_drv references the function __devexit s3c24xx_serial_remove()
If the reference is valid then annotate the variable with
__exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

The same warning happened for s3c241x platform. We rename variables to avoid
these warnings. These changes also apply to s3c2400 & s3c24a0 for consistency.

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:56:41 +01:00
Mark Ware
6e900de3ff cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.c
This is another alloc_bootmem() -> kzalloc() change, this time to
fix the non-fatal badness caused when booting with a cpm2_uart console.

Signed-off-by: Mark Ware <mware@elphinstone.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29 23:22:23 -05:00
Albin Tonnerre
8da14b5fc3 drivers/serial/atmel_serial.c: fix compile when CONFIG_SERIAL_ATMEL=Y and CONFIG_SERIAL_ATMEL_CONSOLE=N
When SERIAL_ATMEL_CONSOLE is disabled, ATMEL_CONSOLE_DEVICE is set to
NULL, and trying to access ATMEL_CONSOLE_DEVICE->flags in
atmel_serial_probe makes the compile fail.  This fixes the issue by only
accessing it if CONFIG_SERIAL_ATMEL_CONSOLE is defined

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:37 -07:00
Stuart Menefy
fd78a76aef sh: Rework irqflags tracing to fix up CONFIG_PROVE_LOCKING.
This cleans up the irqflags tracing code quite a bit and ties it
in to various missing callsites that caused an imbalance when
CONFIG_PROVE_LOCKING was enabled.

Previously this was catching on:

 987 #ifdef CONFIG_PROVE_LOCKING
 988     DEBUG_LOCKS_WARN_ON(!p->hardirqs_enabled);
 989     DEBUG_LOCKS_WARN_ON(!p->softirqs_enabled);
 990 #endif
 991     retval = -EAGAIN;

with hardirqs being doubly enabled, and subsequently bailing out
with the following call trace:

	Call trace:
	[<88035224>] __lock_acquire+0x616/0x6a6
	[<88015a8c>] do_fork+0xf8/0x2b0
	[<880331ec>] trace_hardirqs_on_caller+0xd4/0x114
	[<88241074>] _spin_unlock_irq+0x20/0x64
	[<88035224>] __lock_acquire+0x616/0x6a6
	[<8800386c>] kernel_thread+0x48/0x70
	[<88024ecc>] ____call_usermodehelper+0x0/0x110
	[<88024ecc>] ____call_usermodehelper+0x0/0x110
	[<88003894>] kernel_thread_helper+0x0/0x14
	[<88024bac>] __call_usermodehelper+0x38/0x70
	[<88025dc0>] worker_thread+0x150/0x274
	[<88035b9c>] lock_release+0x0/0x198
	[<88024b74>] __call_usermodehelper+0x0/0x70
	[<88028cf0>] autoremove_wake_function+0x0/0x30
	[<88028bf2>] kthread+0x3e/0x70
	[<88025c70>] worker_thread+0x0/0x274
	[<8800389c>] kernel_thread_helper+0x8/0x14
	[<88028bb4>] kthread+0x0/0x70
	[<88003894>] kernel_thread_helper+0x0/0x14

Reported-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-29 23:01:24 +09:00
Andrew Morton
ff5392d77b drivers/serial/bfin_sport_uart.c: remove wrong and unneeded memset
dcb314@hotmail.com notes that this memset has its args reversed.

It's unneeded anyway, so remove it.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13587

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-16 09:19:16 -07:00
Uwe Kleine-König
8f4256b22c serial: don't add msm_serial's probe function to the driver struct
msm_serial_driver is registered using platform_driver_probe which takes
care for the probe function itself.  So don't pass it in the driver
struct, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-16 09:19:16 -07:00
Joe Perches
ad361c9884 Remove multiple KERN_ prefixes from printk formats
Commit 5fd29d6ccb ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08 10:30:03 -07:00
SUGIOKA Toshinobu
dd4da3a55f serial: sh-sci: fix sci interrupt handler
Fix up the error bit handling on SCI ports.

Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-07 16:51:21 +09:00
Paul Mundt
2b5c0c72ea Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/for-2.6.31 2009-07-07 11:55:05 +09:00
Yoichi Yuasa
ada8e9514b Update Yoichi Yuasa's e-mail address
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03 15:45:29 +01:00
Magnus Damm
44e18e9eda sh-sci: update receive error handling for muxed irqs
This patch updates the receive error code for muxed
interrupts in the sh-sci driver.

Receive error interrupts may be generated by the hardware
if RE or REIE bits in SCSCR are set. Update the muxed
interrupt handling code to acknowledge error interrupts
if RE or REIE is set, instead of only acknowledging if
REIE is set.

Without this patch error interrupts may be generated but
never acked resulting in a "nobody cared" crash.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-03 17:45:58 +09:00
Michael Buesch
c4285b47b0 parport/serial: add support for NetMos 9901 Multi-IO card
Add support for the PCI-Express NetMos 9901 Multi-IO card.

0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550])
        Subsystem: Device [a000:1000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 65
        Region 0: I/O ports at 0030 [size=8]
        Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial
        Kernel modules: 8250_pci

0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550])
        Subsystem: Device [a000:1000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 65
        Region 0: I/O ports at 0020 [size=8]
        Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial
        Kernel modules: 8250_pci

0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284])
        Subsystem: Device [a000:2000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 65
        Region 0: I/O ports at 0010 [size=8]
        Region 1: I/O ports at <unassigned>
        Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: parport_pc
        Kernel modules: parport_pc

[   16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65
[   16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP]
[   16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007)
[   16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2
[   16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007)
[   16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:55:59 -07:00
Arjan van de Ven
24ed3abaa1 pci: use pci_ioremap_bar() in drivers/serial
Use the newly introduced pci_ioremap_bar() function in drivers/serial.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24 09:55:50 -07:00
Andrew Morton
2a13373cf8 jsm: clean up "serial: jsm: correctly support 4 8 port boards"
Remove unneeded casts.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24 09:55:50 -07:00
Atsushi Nemoto
a10b32db34 kgdb: kgdboc console poll hooks for serial_txx9 uart
Implement the serial polling hooks for the serial_txx9 uart for use with
kgdboc.

This patch once got SOB from Jason on Jul 2008 and (perhaps) merged into
kgdb-next branch, but lost somewhere then.  I resend it now with Jason's
Acked-by.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24 09:55:50 -07:00
Alan Cox
44da59e400 msm: fixups to match current code
The tty layer is now a bit more fussy about reporting the right baud rate
back. Make the msm driver match the current state of affairs.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 11:32:25 -07:00
Robert Love
04896a77a9 msm_serial: serial driver for MSM7K onboard serial peripheral.
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 11:32:25 -07:00
Richard Röjfors
2421c48bd7 timbuart: Fix for tx_empty
Hardware updated to support TX FIFO empty.

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 11:32:25 -07:00
Peter Korsgaard
90ceb9644d serial: samsung.c: mark s3c24xx_serial_remove as __devexit
Mark the remove function as __devexit so it gets eliminated in
CONFIG_HOTPLUG=n builds.  Saves ~100 bytes.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 11:32:24 -07:00
Roel Kluin
52e3632ea6 serial: fix off by one errors
In zs_console_putchar() occurs:

	if (zs_transmit_drain(zport, irq))
		write_zsdata(zport, ch);

However if in zs_transmit_drain() no empty Tx Buffer occurs, limit reaches
-1 => true, and the write still occurs.

This patch changes postfix to prefix decrements in this and similar
functions to prevent similar mistakes in the future.  This decreases the
iterations with one but the chosen loop count was arbitrary anyway.

In sunhv limit reaches -1, not 0, so the test is off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 11:32:23 -07:00
Mike Frysinger
607c268ef9 serial: bfin_5xx: fix building as module when early printk is enabled
Since early printk only makes sense/works when the serial driver is built
into the kernel, disable the option for this driver when it is going to be
built as a module.  Otherwise we get build failures due to the ifdef
handling.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 11:32:23 -07:00
Mike Frysinger
9c529a3d76 serial: bfin_5xx: add missing spin_lock init
The Blackfin serial driver never initialized the spin_lock that is part of
the serial core structure, but we never noticed because spin_lock's are
rarely enabled on UP systems.  Yeah lockdep and friends.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 11:32:23 -07:00
Linus Torvalds
773d7a09e1 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits)
  powerpc/5121: make clock debug output more readable
  powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
  powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft
  powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback
  fbdev/xilinxfb: Fix improper casting and tighen up probe path
  usb/ps3: Add missing annotations
  powerpc: Add memory clobber to mtspr()
  powerpc: Fix invalid construct in our CPU selection Kconfig
  ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  powerpc: Add configurable -Werror for arch/powerpc
  of_serial: Add UPF_FIXED_TYPE flag
  drivers/hvc: Add missing __devexit_p()
  net/ps3: gelic - Add missing annotations
  powerpc: Introduce macro spin_event_timeout()
  powerpc/warp: Fix ISA_DMA_THRESHOLD default
  powerpc/bootwrapper: Custom build options for XPedite52xx targets
  powerpc/85xx: Add defconfig for X-ES MPC85xx boards
  powerpc/85xx: Add dts files for X-ES MPC85xx boards
  powerpc/85xx: Add platform support for X-ES MPC85xx boards
  83xx: add support for the kmeter1 board.
  ...
2009-06-19 17:40:40 -07:00
Benjamin Herrenschmidt
b71a107c66 Merge commit 'gcl/merge' into next
Manual merge of:
	drivers/net/fec_mpc52xx.c
2009-06-18 11:22:08 +10:00
Benjamin Herrenschmidt
4b337c5f24 Merge commit 'origin/master' into next 2009-06-18 11:16:55 +10:00
Paul Mundt
3d3638da49 Merge branches 'sh/pci-express-integration', 'sh/rsk-updates', 'sh/platform-updates' and 'sh/perf_counter' 2009-06-17 16:37:26 +09:00
Wolfgang Denk
87c441e54d powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency,
while MPC52xx used mpc52xx_find_ipb_freq().  Despite the different
clock names (IPS vs. IPB) the code was identical.

Use common code for both processor families.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-17 00:30:22 -06:00
Benjamin Herrenschmidt
492b057c42 Merge commit 'origin/master' into next 2009-06-17 10:24:53 +10:00
Linus Torvalds
6fd03301d7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits)
  debugfs: use specified mode to possibly mark files read/write only
  debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
  xen: remove driver_data direct access of struct device from more drivers
  usb: gadget: at91_udc: remove driver_data direct access of struct device
  uml: remove driver_data direct access of struct device
  block/ps3: remove driver_data direct access of struct device
  s390: remove driver_data direct access of struct device
  parport: remove driver_data direct access of struct device
  parisc: remove driver_data direct access of struct device
  of_serial: remove driver_data direct access of struct device
  mips: remove driver_data direct access of struct device
  ipmi: remove driver_data direct access of struct device
  infiniband: ehca: remove driver_data direct access of struct device
  ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device
  hvcs: remove driver_data direct access of struct device
  xen block: remove driver_data direct access of struct device
  thermal: remove driver_data direct access of struct device
  scsi: remove driver_data direct access of struct device
  pcmcia: remove driver_data direct access of struct device
  PCIE: remove driver_data direct access of struct device
  ...

Manually fix up trivial conflicts due to different direct driver_data
direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
2009-06-16 12:57:37 -07:00
Sascha Hauer
1a2c4b3147 imx: Check for NULL pointer deref before calling tty_encode_baud_rate
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 12:01:17 -07:00
Haavard Skinnemoen
0ccad87012 atmel_serial: fix hang in set_termios when crtscts is enabled
After enabling hardware flow control, any subsequent termios call may hang
waiting for the transmitter to drain.  This appears to be caused by a
busy-loop in set_termios() waiting for the transmitter to become empty,
which may take a very long time (or hang indefinitely) if the device at
the other end is blocking us.

A quick look through the tty and serial_core code indicates that any
necessary flushing (which is optional) has already been done at this
point, so there's no need for the driver to flush the transmitter on its
own.

Fix it by removing the busy-loop altogether.

Tested-by: Eirik Aanonsen <eaa@wprmedical.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 12:01:16 -07:00
Greg Kroah-Hartman
3cf62a5a82 of_serial: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Matthias Fuchs <mfuchs@ma-fu.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:28 -07:00
Dave Mitchell
eedacbf02d of_serial: Add UPF_FIXED_TYPE flag
This patch adds the UPF_FIXED_TYPE flag which will bypass the
8250's autoconfig probe for uart type. The uart type identified
by the of_serial's parse of the flat device tree will be utilized
as defined.

Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:45 +10:00
Dave Liu
b45cc9eff7 serial: Make ucc_uart work in HW UART mode
In HW UART mode the TxBD[READY] is not cleared by H/W (RISC engine) when
the user send characters to Tx buffer of QE UART.  So, these characters
stay on the QE forever, never go to UART line.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:31 -05:00
David S. Miller
9cbc1cb8cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
2009-06-15 03:02:23 -07:00
Paul Mundt
6daa79b3c1 serial: sh-sci: Move over to dev_pm_ops.
Presently the boot log whines about suspend/resume hooks at the platform
driver level, move these over to dev_pm_ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15 07:07:38 +09:00
Linus Torvalds
489f7ab6c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
  trivial: remove the trivial patch monkey's name from SubmittingPatches
  trivial: Fix a typo in comment of addrconf_dad_start()
  trivial: usb: fix missing space typo in doc
  trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
  trivial: Remove the hyphen from git commands
  trivial: fix ETIMEOUT -> ETIMEDOUT typos
  trivial: Kconfig: .ko is normally not included in module names
  trivial: SubmittingPatches: fix typo
  trivial: Documentation/dell_rbu.txt: fix typos
  trivial: Fix Pavel's address in MAINTAINERS
  trivial: ftrace:fix description of trace directory
  trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
  trivial: input/misc: Fix typo in Kconfig
  trivial: fix grammo in bus_for_each_dev() kerneldoc
  trivial: rbtree.txt: fix rb_entry() parameters in sample code
  trivial: spelling fix in ppc code comments
  trivial: fix typo in bio_alloc kernel doc
  trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
  trivial: Miscellaneous documentation typo fixes
  trivial: fix typo milisecond/millisecond for documentation and source comments.
  ...
2009-06-14 13:46:25 -07:00
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Pavel Machek
4737f0978d trivial: Kconfig: .ko is normally not included in module names
.ko is normally not included in Kconfig help, make it consistent.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:50 +02:00
Linus Torvalds
d3d07d941f Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (266 commits)
  sh: Tie sparseirq in to Kconfig.
  sh: Wire up sys_rt_tgsigqueueinfo.
  sh: Fix sys_pwritev() syscall table entry for sh32.
  sh: Fix sh4a llsc-based cmpxchg()
  sh: sh7724: Add JPU support
  sh: sh7724: INTC setting update
  sh: sh7722 clock framework rewrite
  sh: sh7366 clock framework rewrite
  sh: sh7343 clock framework rewrite
  sh: sh7724 clock framework rewrite V3
  sh: sh7723 clock framework rewrite V2
  sh: add enable()/disable()/set_rate() to div6 code
  sh: add AP325RXA mode pin configuration
  sh: add Migo-R mode pin configuration
  sh: sh7722 mode pin definitions
  sh: sh7724 mode pin comments
  sh: sh7723 mode pin V2
  sh: rework mode pin code
  sh: clock div6 helper code
  sh: clock div4 frequency table offset fix
  ...
2009-06-11 10:08:33 -07:00
Oskar Schirmer
d7f8d437bd imx: serial: use tty_encode_baud_rate to set true rate
real baud rate may be different from the one requested.
for upper layers, set the nearest value to the real rate
in favour of the rate previously requested.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:09 -07:00
Fabian Godehardt
b6e4913834 imx: serial: add IrDA support to serial driver
Using the iMX serial driver with an IrDA device
needs extra peripheral settings and specific
timing depending on the transmitter circuitry used.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Oskar Schirmer
534fca068e imx: serial: use rational library function
for calculation of numerator and denominator
used in baud rate setting, use generic library function
for optimum settings.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Daniel Glöckner
9f322ad064 imx: serial: handle initialisation failure correctly
correctly de-initialise device when setting up failed,
call to pdata->exit() was missing.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Fabian Godehardt
2e1463922a imx: serial: be sure to stop xmit upon shutdown
needed to avoid continued transmission by hardware
while software already shuts down, which might
cause dangling characters to show up in hardware
queues when restarting the device.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Fabian Godehardt
977757311e imx: serial: notify higher layers in case xmit IRQ was not called
upper layers, namely line discipline, need to be notified
when transmission of more data is possible. For spurious
cases, where IRQ handling does not supply notification
for sure, it is given additionally here, when data has just
been transmitted and space in the buffer will most probably
be available.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Daniel Glöckner
26bbb3ff1f imx: serial: fix one bit field type
"have_rtscts" is assigned 1, while it is declared
int:1, two's complement, which can hold 0 and -1
only. The code works, as the upper bits are cut
off, and tests are done against 0 only.

Nonetheless, correctly declaring the bit field
as unsigned int:1 renders the code more robust.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Oskar Schirmer
d3810cd4d7 imx: serial: fix whitespaces (no changes in functionality)
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:07 -07:00
Alan Cox
7d55deaf50 timbuart: Fix the termios logic
The driver only handles speeds but it fails to return the current values
for the hardware features it does not support.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:06 -07:00
Richard Röjfors
34aec59184 serial: Added Timberdale UART driver
Driver for the UART found in the Timberdale FPGA

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:06 -07:00
Sonic Zhang
2860b79111 Blackfin Serial Driver: disable dma rx interrupt only rather than all irqs
The UART RX handling code isn't exactly speeding, so don't go disabling
all interrupts when processing the buffer.  Just disable the relevant DMA
interrupt.  This greatly improves latency of the system when utilizing the
UART.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:05 -07:00
Sonic Zhang
84507794a9 Blackfin Serial Driver: handle anomaly 05000231
05000231 - UART STB Bit Incorrectly Affects Receiver Setting
For processors affected by this, we cannot safely allow CSTOPB to be set
as the UART will then be unable to properly clock in bytes.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Sonic Zhang
0efa4f2c94 Blackfin Serial Driver: annotate anomalies 05000215 and 05000099
Add some comments for how these anomalies are addressed:

05000215 - UART TX Interrupt Masked Erroneously
We always clear ETBEI within last UART TX interrupt to end
a string.  It is always set when starting a new tx transfer.

05000099 - UART Line Status Register (UART_LSR) Bits Are Not Updated at
the Same Time
This anomaly affects driver only in POLL code where multi bits of
UART_LSR are checked. It doesn't affect current bfin_5xx.c driver.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Sonic Zhang
35ff693579 Blackfin Serial Driver: handle irregular DMA register status in auto start mode
This bug is caused by irregular behavior of DMA register CURR_X_COUNT
and CURR_Y_COUNT when an auto restart uart rx DMA run to last byte in
DMA buffer, trigger the interrupt and stay at this possiton. The status
of current x and y is 0:7 instead of 512:8 or 0:8. The driver doesn't
take care of this case when calculating the position.

URL: http://blackfin.uclinux.org/gf/tracker/5063
Reported-by: Tomasz Motylewski <t.motylewski@bfad.de>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Graf Yang
f9d36da9cd Blackfin Serial Driver: fix missing new lines when under load
Add a SSYNC() into bfin_serial_dma_tx_chars() to ensure DMA registers are
written with new data otherwise we might miss a byte or two when the
system is under load.  PIO mode is OK though.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Robin Getz
7de7c55bf5 Blackfin Serial Driver: fix baudrate for early_printk
Since we already setup the early console UART in
arch/blackfin/kernel/early_printk.c, and common functions which are
enabled from the .setup will override the proper settings later, don't
fill in these structures.  Otherwise we get mangled baudrate settings when
using early_printk.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Sonic Zhang
8516c568f2 Blackfin Serial Driver: fix error while transferring large files
Ignore receiving data if new position is in the same line of current
buffer tail and is small.  This should decrease overruns.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Mike Frysinger
4328e3e5ef Blackfin SPORT UART: rewrite inline assembly
Hopefuly the new version is easier to read, but in the process it declares
proper clobber lists and better constraints so that GCC can do a better
job at allocating free registers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:04 -07:00
Michael Hennerich
a19e8b2059 Blackfin SPORT UART: fix data misses while using transmit frame sync
SPORT transmit frame sync (TFS) isn't used as an electrical signal during
normal SPORT UART emulation.  However, it is useful in EIA RS-485
emulation as RS-485 Transceiver Driver Enable DE strobe.

This patch configures:
TFS to be active high in order to drive an DE strobe of
an eventually connected RS-485 Transceiver.

Late frame sync mode (LATFS) gating the entire TX shift cycle.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Mike Frysinger
b5c6794fe4 Blackfin SPORT UART: fix typo in sport_set_termios prototype
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Florian Fainelli
08e0992f60 serial: add support for the TI AR7 internal UART
This patch adds support for the TI AR7 internal UART.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Breno Leitao
257a6e8cc7 icom: fix compile errors when defining ICOM_TRACE
As it is, defining ICOM_TRACE produces some compile errors, as
"parameter name omitted" and "redefinition of ‘trace’"

This patch removes the wrong trace definition.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:03 -07:00
Breno Leitao
aba6593bf7 icom: fixing a if clause spaghetti
adapter->version can only be ADAPTER_V2 or ADAPTER_V1. So,
that OR operand in the "if" clause is non-sense and can be removed.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:02 -07:00
Alexander Y. Fomichev
13858d3690 jsm: correctly support multiple 4/8-port boards
If there are more then one 4/8-port board jsm_uart_port_init
allocate a line numbers of the second and further boards
from range of previous one.

This patch fixed the problem.

Signed-off-by: Alexander Y. Fomichev <git.user@gmail.com>

[printks fixed to add jsm: ]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:02 -07:00
Andre Przywara
70fd8fdecc 8250_pci: add the OXCB950 chip to the 8250 PCI driver.
This adds support for the following serial controller chip:
Oxford Semiconductor OXCB950 for PCI Cardbus interface
http://www.transdimension.com/products/serial/OXCB950.html

on this card:
ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:58 -07:00
Linus Walleij
dc890c2dcd [ARM] 5544/1: Trust PrimeCell resource sizes
I found the PrimeCell/AMBA Bus drivers distrusting the resource
passed in as part of the struct amba_device abstraction. This
patch removes all hard coded resource sizes found in the PrimeCell
drivers and move the responsibility of this definition back to
the platform/board device definition, which already exist and
appear to be correct for all in-tree users of these drivers.
We do this using the resource_size() inline function which was
also replicated in the only driver using the resource size, so
that has been changed too. The KMI_SIZE was left in kmi.h in case
someone likes it. Test-compiled against Versatile and Integrator
defconfigs, seems to work but I don't posess these boards and
cannot test them.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 15:36:56 +01:00
Paul Mundt
cf9fe114e3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-06-11 09:01:14 +03:00
Russell King
7698fdedcf Merge branch 'for-rmk' of git://git.marvell.com/orion into devel 2009-06-08 19:27:13 +01:00
Russell King
2d8d24935d Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into devel 2009-06-08 19:26:28 +01:00