All exceptions are taken via interrupt gates. TRACE_IRQS_OFF
is called just before entering the C code, so the irq state
is known to the irq tracer at this point. No need to call
trace_hardirqs_fixup.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add TRACE_IRQS_OFF just before entering the C code.
All exceptions are taken via interrupt gates. If irq tracing is
enabled, it should be notified as soon as possible. Interrupts
are only (conditionally) re-enabled in C code.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add TRACE_IRQS_OFF just before entering the C code.
All exceptions are taken via interrupt gates. If irq tracing is
enabled, it should be notified as soon as possible. Interrupts
are only (conditionally) re-enabled in C code.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Portions of the ACPI code needs to know if a system is a UV system prior
to genapic initialization. This patch adds a call early_acpi_boot_init()
so that the apic type is discovered earlier.
V2 of the patch adding fixes from Yinghai Lu.
Much cleaner and smaller.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Take it out of time initialization and move it to
cpu detection time.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only test for MCA_bus if support for MCA is compiled in.
Also, for x86_64, write the code inside the conditional
for consistency with i386. It won't bite us, since it'll
probably never select CONFIG_MCA anyway.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace "4" in time_32.c code by sizeof(long).
This way, it can work on x86_64 too.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For x86_64, it does not really matter. But makes the
code equal to i386.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Save rbp twice: One is for marking the stack frame, as usual (already
there), and the other, to fill pt_regs properly. This is because bx
comes right before the last saved register in that structure, and not
bp. If the base pointer were in the place bx is today, this would not
be needed.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Coalesce v8086_mode and user_mode into a single
user_mode_vm() test.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of using SEGMENT_IS_KERNEL_CODE, use the
"user_mode" macro, which can play the same role. Delete
the former, since it now lacks any user.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some CPUs have vendor string in the middle of model_id instead of beginning
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We should check if we have ESR register before reading from it.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The remappings in setup.c are all just ordinary memory, so use
early_memremap() rather than early_ioremap().
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The exception handlers in entry_32.S should now all call
TRACE_IRQS_OFF before calling the C code. The calls to
trace_hardirqs_fixup should now be unnecessary. Remove them.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this point interrupts are off, so let's inform the tracing
code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this point interrupts are off, so let's inform the tracing
code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this point interrupts are off, so let's inform the tracing
code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Many exceptions use the same code path via the label 'error_code'
in entry_32.S. At this point interrupts are off, so let's inform
the tracing code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only one use of the DO_TRAP macros remains. Expand that one and
remove the macros now.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle general protection exception with interrupt initially off.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle segment not present exception with interrupt initially off.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle no coprocessor exception with interrupt initially off.
device_not_available in entry_32.S calls either math_state_restore
or math_emulate. This patch adds an extra indirection to be
able to re-enable interrupts explicitly in traps_32.c
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The int3 exception was already takes as an interrupt and
do_int3 does not fit in the new DO_ERROR macro. This patch
just expands the DO_TRAP macro and rearranges the code a
bit.
No functional changes intended.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is some macro magic in traps_32.c to construct standard
exception dispatch functions. This patch renames the DO_ERROR-
like macros to DO_TRAP, and introduces new DO_ERROR ones that
conditionally reenable interrupts explicitly, like x86_64.
No code changes.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86_64 uses a helper function conditional_sti in traps_64.c which
is equal to restore_interrupts in kprobes.h. The only user of
restore_interrupts is in traps_32.c. Introduce conditional_sti
for i386 and remove restore_interrupts.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Secondary cpus start with local interrupts disabled.
start_secondary() first initializes the new cpu, then it enables the
local interrupts. (although interrupts are enabled within smp_callin()
as well).
Right now, the local interrupts are enabled as a side effect of calling
ipi_call_lock_irq().
The attached patch clarifies when local interrupts are enabled.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
propagate an error in enabling the PCI device.
Also eliminates this warning:
arch/x86/kernel/amd_iommu_init.c: In function ‘init_iommu_one’:
arch/x86/kernel/amd_iommu_init.c:726: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/io_apic_64.c: In function ‘print_local_APIC’:
arch/x86/kernel/io_apic_64.c:1284: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
arch/x86/kernel/io_apic_64.c:1285: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
We want to print the two halves of 'icr' at 32 bit width.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix warning:
arch/x86/kernel/early_printk.c:993: warning: ‘enable_debug_console’ defined but not used
Eliminate dead code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix warning:
arch/x86/kernel/xsave.c: In function ‘save_i387_xstate’:
arch/x86/kernel/xsave.c:98: warning: ignoring return value of ‘__clear_user’, declared with attribute warn_unused_result
check the return value and act on it. We should not be ignoring faults
at this point.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This adds a user_regset type for the x86 io permissions bitmap.
This makes it appear in core dumps (when ioperm has been used).
It will also make it visible to debuggers in the future.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
[conflict resolutions: Signed-off-by: Ingo Molnar <mingo@elte.hu> ]
Do not crash when enumerating supported CPU architectures
SECURITY_INIT somehow ended up in x86_cpu_dev.init section. That caused printk
in code which prints supported architectures to hit #GP due to non-canonical
address being used.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: thomas.petazzoni@free-electrons.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's possible for get_wchan() to dereference past task->stack + THREAD_SIZE
while iterating through instruction pointers if fp equals the upper boundary,
causing a kernel panic.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-v28-for-linus-phase4-D' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (186 commits)
x86, debug: print more information about unknown CPUs
x86 setup: handle more than 8 CPU flag words
x86: cpuid, fix typo
x86: move transmeta cap read to early_init_transmeta()
x86: identify_cpu_without_cpuid v2
x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo
x86: move VMX MSRs to msr-index.h
x86: centaur_64.c remove duplicated setting of CONSTANT_TSC
x86: intel.c put workaround for old cpus together
x86: let intel 64-bit use intel.c
x86: make intel_64.c the same as intel.c
x86: make intel.c have 64-bit support code
x86: little clean up of intel.c/intel_64.c
x86: make 64 bit to use amd.c
x86: make amd_64 have 32 bit code
x86: make amd.c have 64bit support code
x86: merge header in amd_64.c
x86: add srat_detect_node for amd64
x86: remove duplicated force_mwait
x86: cpu make amd.c more like amd_64.c v2
...
* 'x86-v28-for-linus-phase3-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
AMD IOMMU: use iommu_device_max_index, fix
AMD IOMMU: use iommu_device_max_index
x86: add PCI IDs for AMD Barcelona PCI devices
x86/iommu: use __GFP_ZERO instead of memset for GART
x86/iommu: convert GART need_flush to bool
x86/iommu: make GART driver checkpatch clean
x86 gart: remove unnecessary initialization
x86: restore old GART alloc_coherent behavior
revert "x86: make GART to respect device's dma_mask about virtual mappings"
x86: export pci-nommu's alloc_coherent
iommu: remove fullflush and nofullflush in IOMMU generic option
x86: remove set_bit_string()
iommu: export iommu_area_reserve helper function
AMD IOMMU: use coherent_dma_mask in alloc_coherent
add AMD IOMMU tree to MAINTAINERS file
AMD IOMMU: use cmd_buf_size when freeing the command buffer
AMD IOMMU: calculate IVHD size with a function
AMD IOMMU: remove unnecessary cast to u64 in the init code
AMD IOMMU: free domain bitmap with its allocation order
AMD IOMMU: simplify dma_mask_to_pages
...
* 'x86-v28-for-linus-phase2-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
x86, cpa: make the kernel physical mapping initialization a two pass sequence, fix
x86, pat: cleanups
x86: fix pagetable init 64-bit breakage
x86: track memtype for RAM in page struct
x86, cpa: srlz cpa(), global flush tlb after splitting big page and before doing cpa
x86, cpa: remove cpa pool code
x86, cpa: no need to check alias for __set_pages_p/__set_pages_np
x86, cpa: dont use large pages for kernel identity mapping with DEBUG_PAGEALLOC
x86, cpa: make the kernel physical mapping initialization a two pass sequence
x86, cpa: remove USER permission from the very early identity mapping attribute
x86, cpa: rename PTE attribute macros for kernel direct mapping in early boot
x86: make sure the CPA test code's use of _PAGE_UNUSED1 is obvious
linux-next: fix x86 tree build failure
x86: have set_memory_array_{uc,wb} coalesce memtypes, fix
agp: enable optimized agp_alloc_pages methods
x86: have set_memory_array_{uc,wb} coalesce memtypes.
x86: {reverve,free}_memtype() take a physical address
x86: fix pageattr-test
agp: add agp_generic_destroy_pages()
agp: generic_alloc_pages()
...
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code
[CPUFREQ] Don't export governors for default governor
[CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor
[CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor
[CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential
[CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting
[CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination
[CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()
[CPUFREQ] use deferrable delayed work init in conservative governor
[CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put
[CPUFREQ] add error handling for cpufreq_register_governor() error
[CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error
[CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c
[CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c
* 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
sched debug: add name to sched_domain sysctl entries
sched: sync wakeups vs avg_overlap
sched: remove redundant code in cpu_cgroup_create()
sched_rt.c: resch needed in rt_rq_enqueue() for the root rt_rq
cpusets: scan_for_empty_cpusets(), cpuset doesn't seem to be so const
sched: minor optimizations in wake_affine and select_task_rq_fair
sched: maintain only task entities in cfs_rq->tasks list
sched: fixup buddy selection
sched: more sanity checks on the bandwidth settings
sched: add some comments to the bandwidth code
sched: fixlet for group load balance
sched: rework wakeup preemption
CFS scheduler: documentation about scheduling policies
sched: clarify ifdef tangle
sched: fix list traversal to use _rcu variant
sched: turn off WAKEUP_OVERLAP
sched: wakeup preempt when small overlap
kernel/cpu.c: create a CPU_STARTING cpu_chain notifier
kernel/cpu.c: Move the CPU_DYING notifiers
sched: fix __load_balance_iterator() for cfq with only one task
...
This merges phase 1 of the x86 tree, which is a collection of branches:
x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump,
x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart,
x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile,
x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and
x86/vmalloc
and as Ingo says: "these are the easiest, purely independent x86 topics
with no conflicts, in one nice Octopus merge".
* 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits)
x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE
x86: mtrr_cleanup: first 1M may be covered in var mtrrs
x86: mtrr_cleanup: print out correct type v2
x86: trivial printk fix in efi.c
x86, debug: mtrr_cleanup print out var mtrr before change it
x86: mtrr_cleanup try gran_size to less than 1M, v3
x86: mtrr_cleanup try gran_size to less than 1M, cleanup
x86: change MTRR_SANITIZER to def_bool y
x86, debug printouts: IOMMU setup failures should not be KERN_ERR
x86: export set_memory_ro and set_memory_rw
x86: mtrr_cleanup try gran_size to less than 1M
x86: mtrr_cleanup prepare to make gran_size to less 1M
x86: mtrr_cleanup safe to get more spare regs now
x86_64: be less annoying on boot, v2
x86: mtrr_cleanup hole size should be less than half of chunk_size, v2
x86: add mtrr_cleanup_debug command line
x86: mtrr_cleanup optimization, v2
x86: don't need to go to chunksize to 4G
x86_64: be less annoying on boot
x86, olpc: fix endian bug in openfirmware workaround
...
Write the name of the unknown vendor_id to output instead of just
"unknown".
Tag changed to 'vendor_id' as used in /proc/cpuinfo
Signed-off-by: Hans Schou <linux@schou.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a cpu parameter to __cpufreq_driver_getavg(). This is needed for software
cpufreq coordination where policy->cpu may not be same as the CPU on which we
want to getavg frequency.
A follow-on patch will use this parameter to getavg freq from all cpus
in policy->cpus.
Change since last patch. Fix the offline/online and suspend/resume
oops reported by Youquan Song <youquan.song@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
add error handling for cpufreq_register_driver() error
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: cpufreq@lists.linux.org.uk
Signed-off-by: Dave Jones <davej@redhat.com>
If a processor implementation discern that a processor state component is in
its initialized state, it may modify the corresponding bit in the
xsave header.xstate_bv as '0'. State in the memory layout setup by 'xsave'
will be consistent with the bit values in the header.
During signal handling, legacy applications may change the FP/SSE bits
in the sigcontext memory layout without touching the FP/SSE header bits
in the xsave header. So always set FP/SSE bits in the xsave header
while saving the sigcontext state to the user space. During signal return,
this will enable the kernel to capture any changes to the FP/SSE bits by the
legacy applications which don't touch xsave headers.
xsave aware apps can change the xstate_bv in the xsave header aswell
as change any contents in the memory layout. xrestor as part of sigreturn
will capture all the changes.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This PCI ID based quick should be a full solution for the IRQ0 override
related slowdown problem on SB450 based systems:
33fb0e4: x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC
Emit a warning in those cases where the DMI quirk triggers but
the PCI ID based quirk didnt.
If this warning does not trigger then we can phase out the DMI quirks.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On some HP nx6... laptops (e.g. nx6325) BIOS reports an IRQ0 override
but the SB450 chipset is configured such that timer interrupts goe to
INT0 of IOAPIC.
Check IRQ0 routing and if it is routed to INT0 of IOAPIC skip the
timer override.
[ This more generic PCI ID based quirk should alleviate the need for
dmi_ignore_irq0_timer_override DMI quirks. ]
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Tested-by: Dmitry Torokhov <dtor@mail.ru>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: gart iommu have direct mapping when agp is present too
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest,
I came across spurious unhandled NMIs while running the singlestep test.
Looking closer at the code path each NMI takes when KGDB is enabled, I
noticed that kgdb_nmicallback is called twice per event: One time via
DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first
invocation cures the unhandled NMIs here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
There is a bug in the BIOSes of some HP boxes with AMD Turions which
connects IO-APIC pins with ACPI thermal trip points in such a way that
if the state of the IO-APIC is not as expected by the (buggy) BIOS, the
thermal trip points are set to insanely low values (usually all of them
become 16 degrees Celsius). As a result, thermal throttling kicks in
and knock the system down to its shoes.
Unfortunately some of the recent IO-APIC changes made the bug show up.
To prevent this from happening, blacklist machines that are known to be
affected (nx6115 and 6715b in this particular case).
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as
a regression from 2.6.26.
On my box it was caused by:
commit 691874fa96
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Tue May 27 21:19:51 2008 +0100
x86: I/O APIC: timer through 8259A second-chance
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
and the whole story is described in this (huge) thread:
http://marc.info/?l=linux-kernel&m=121358440508410&w=4
Matthew Garrett told us about that happening on the nx6125:
http://marc.info/?l=linux-kernel&m=121396307411930&w=4
and then Maciej analysed the breakage on the basis of a DSDT from the
nx6325:
http://marc.info/?l=linux-kernel&m=121401068718826&w=4
As far as the Dmitry's and Jason's boxes are concerned, I recognized the
symptoms and asked them to verify that the blacklisting helped.
It appears that the buggy BIOS code has been copy-pasted to the entire
range of machines, for no good reason.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
move init_memory_mapping() out of init_k8_gatt.
for: http://bugzilla.kernel.org/show_bug.cgi?id=11676
2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression
This is needed because we need to map the GART aperture even
if the GATT is not initialized.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For the purpose of MTRR canonicalization, treat WRPROT as UNCACHEABLE.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The first 1M is don't care when it comes to the variables MTRRs.
Cover it as WB as a heuristic approximation; this is generally what we
want to minimize the number of registers.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Print out the correct type when the Write Protected (WP) type is seen.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
[patch] x86: Trivial printk fix in efi.c
The following line is lacking a space between "memdesc" and "doesn't".
"Kernel-defined memdescdoesn't match the one from EFI!"
Fixed the printk by adding a space.
Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
remove braces and indent for flags and fpstate in restore_sigcontext().
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious. It got introduced along with
another bug, already fixed, by 75b8bb3e56
After investigating a JRE failure, I found this bug was introduced a long time
ago, and had already managed to survive another bugfix which occurred on the
same line. The result is a total failure of the JRE due to LDT selectors not
working properly.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After investigating a JRE failure, I found this bug was introduced a
long time ago, and had already managed to survive another bugfix which
occurred on the same line. The result is a total failure of the JRE due
to LDT selectors not working properly.
This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious. It got introduced along with
another bug, already fixed, by 75b8bb3e56
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The number of BIOSes that have an option to enable the IOMMU, or fix
anything about its configuration, is vanishingly small. There's no good
reason to punish quiet boot for this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Delay exit to make sure we can actually get the optimal result in as
many cases as possible.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
v2: should check with half of range0 size instead of chunk_size
So don't have silly big hole.
in hpa's case we could auto detect instead of adding mtrr_chunk_size in
command line.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
add mtrr_cleanup_debug to print out more info about layout
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
change back chunksize max to 2g
otherwise will get strange layout in 2G ram system like
0 - 4g WB, 2040M - 2048M UC, 2048M - 4G NC
instead of
0 - 2g WB, 2040M - 2048M UC
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On x86_64 the gdb serial register structure defines the PS (also known
as eflags), CS and SS registers as 4 bytes entities.
This patch splits the x86_64 regnames enum into a 32 and 64 version to
account for the 32 bit entities in the gdb serial packets.
Also the program counter is properly filled in for the sleeping
threads.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
On the x86 arch, user space single step exceptions should be ignored
if they occur in the kernel space, such as ptrace stepping through a
system call.
First check if it is kgdb that is executing a single step, then ensure
it is not an accidental traversal into the user space, while in kgdb,
any other time the TIF_SINGLESTEP is set, kgdb should ignore the
exception.
On x86, arm, mips and powerpc, the kgdb_contthread usage was
inconsistent with the way single stepping is implemented in the kgdb
core. The arch specific stub should always set the
kgdb_cpu_doing_single_step correctly if it is single stepping. This
allows kgdb to correctly process an instruction steps if ptrace
happens to be requesting an instruction step over a system call.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
There is no point to have such initialization in struct dma_mapping_ops.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, GART alloc_coherent tries to allocate pages with GFP_DMA32
for a device having dma_masks > 24bit < 32bits. If GART gets an
address that a device can't access to, GART try to map the address to
a virtual I/O address that the device can access to.
But Andi pointed out, "The GART is somewhere in the 4GB range so you
cannot use it to map anything < 4GB. Also GART is pretty small."
http://lkml.org/lkml/2008/9/12/43
That is, it's possible that GART doesn't have virtual I/O address
space that a device can access to. The above behavior doesn't work for
a device having dma_masks > 24bit < 32bits.
This patch restores old GART alloc_coherent behavior (before the
alloc_coherent rewrite).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts:
commit bee44f294e
Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri Sep 12 19:42:35 2008 +0900
x86: make GART to respect device's dma_mask about virtual mappings
I wrote the above commit to fix a GART alloc_coherent regression, that
can't handle a device having dma_masks > 24bit < 32bits, introduced by
the alloc_coherent rewrite:
http://lkml.org/lkml/2008/8/12/200
After the alloc_coherent rewrite, GART alloc_coherent tried to
allocate pages with GFP_DMA32. If GART got an address that a device
can't access to, GART mapped the address to a virtual I/O address. But
GART mapping mechanism didn't take account of dma mask, so GART could
use a virtual I/O address that the device can't access to again.
Alan pointed out:
" This is indeed a specific problem found with things like older
AACRAID where control blocks must be below 31bits and the GART
is above 0x80000000. "
The above commit modified GART mapping mechanism to take care of dma
mask. But Andi pointed out, "The GART is somewhere in the 4GB range so
you cannot use it to map anything < 4GB. Also GART is pretty small."
http://lkml.org/lkml/2008/9/12/43
That means it's possible that GART doesn't have virtual I/O address
space that a device can access to. The above commit (to modify GART
mapping mechanism to take care of dma mask) can't fix the regression
reliably so let's avoid making GART more complicated.
We need a solution that always works for dma_masks > 24bit <
32bits. That's how GART worked before the alloc_coherent rewrite.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make 32-bit setup_rt_frame() look like 64-bit version for unification.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce new macro is_ia32 for unification of setup_rt_frame().
No effect in binary, compiler will optimize.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This helper function is for unification of setup_rt_frame().
No effect in binary.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce signr_convert().
This function will help unification of setup_rt_frame().
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: prevent stale state of c1e_mask across CPU offline/online, fix
(1) mark mc_size in generic_load_microcode() as unitialized_var to avoid
gcc's (false) warning;
(2) mark request_microcode_user() as unsupported. The required changes
can be added later. Note, we don't break any user-space interfaces
here, as there were no kernels with support for AMD-specific ucode
update yet. The ucode has to be updated via 'firmware'.
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Boardrev is always treated as a u32 everywhere else, no reason to
byteswap the 0xc2 value. The only use is to print out if it is
a prerelease board, the test being:
(olpc_platform_info.boardrev & 0xf) < 8
Which is currently always true as be32_to_cpu(0xc2) & 0xf = 0
but I doubt that was the intention here. The consequences of the bug
are pretty minor though (incorrect boardrev displayed in dmesg when
ofw support not configured)
Also annotate the temporary used to read the boardrev in the ofw
case.
The confusion was noticed by Sparse:
arch/x86/kernel/olpc.c:206:32: warning: cast to restricted __be32
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/ptrace.c:763:29: warning: Using plain integer as NULL pointer
arch/x86/kernel/ptrace.c:777:46: warning: Using plain integer as NULL pointer
arch/x86/kernel/ptrace.c:1115:45: warning: Using plain integer as NULL pointer
arch/x86/kernel/ds.c:482:26: warning: Using plain integer as NULL pointer
arch/x86/kernel/ds.c:487:25: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The OLPC doesn't support APM but also doesn't have DMI, so we can't detect
and disable it based on DMI data. So, just disable based on machine_is_olpc()
Signed-off-by: Jeremy Katz <katzj@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix build error introduced by commit 4faac97d44 ("x86: prevent stale
state of c1e_mask across CPU offline/online").
process_32.c needs to include idle.h to get the prototype for
c1e_remove_cpu()
Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: fix build error in !oneshot case
x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSC
x86: prevent C-states hang on AMD C1E enabled machines
clockevents: prevent mode mismatch on cpu online
clockevents: check broadcast device not tick device
clockevents: prevent stale tick_next_period for onlining CPUs
x86: prevent stale state of c1e_mask across CPU offline/online
clockevents: prevent cpu online to interfere with nohz
Renaming based on patch from Dmitry Adamushko.
Further clarification by renaming define and variable related to
microcode container file.
Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Renaming based on patch from Dmitry Adamushko.
Made code more readable by renaming define and variables related
to microcode _container_file_ header to make it distinguishable from
microcode _patch_ header.
Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently a SIGTRAP can denote any one of below reasons.
- Breakpoint hit
- H/W debug register hit
- Single step
- Signal sent through kill() or rasie()
Architectures like powerpc/parisc provides infrastructure to demultiplex
SIGTRAP signal by passing down the information for receiving SIGTRAP through
si_code of siginfot_t structure. Here is an attempt is generalise this
infrastructure by extending it to x86 and x86_64 archs.
Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: akpm@linux-foundation.org
Cc: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Combine both generic and arch-specific parts of microcode into a
single module (arch-specific parts are config-dependent).
Also while we are at it, move arch-specific parts from microcode.h
into their respective arch-specific .c files.
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: "Peter Oruba" <peter.oruba@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Functional TSC is marked unstable on AMD family 0x10 and 0x11 CPUs.
This would be wrong because for those CPUs "invariant TSC" means:
"The TSC counts at the same rate in all P-states, all C states, S0,
or S1"
(See "Processor BIOS and Kernel Developer's Guides" for those CPUs.)
[ tglx: Changed C1E to AMD C1E in the printks to avoid confusion
with Intel C1E ]
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Impact: System hang when AMD C1E machines switch into C2/C3
AMD C1E enabled systems do not work with normal ACPI C-states
even if the BIOS is advertising them. Limit the C-states to
C1 for the ACPI processor idle code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Impact: hang which happens across CPU offline/online on AMD C1E systems.
When a CPU goes offline then the corresponding bit in the broadcast
mask is cleared. For AMD C1E enabled CPUs we do not reenable the
broadcast when the CPU comes online again as we do not clear the
corresponding bit in the c1e_mask, which keeps track which CPUs
have been switched to broadcast already. So on those !$@#& machines
we never switch back to broadcasting after a CPU offline/online cycle.
Clear the bit when the CPU plays dead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
27-rc fails to boot up if configured to use modules.
Turns out vsmp_patch was marked __init, and vsmp_patch being the
pvops 'patch' routine for vsmp, a call to vsmp_patch just turns out
to execute a code page with series of 0xcc (POISON_FREE_INITMEM -- int3).
vsmp_patch has been marked with __init ever since pvops, however,
apply_paravirt can be called during module load causing calls to
freed memory location.
Since apply_paravirt can only be called during init/module load, make
vsmp_patch with "__init_or_module"
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
DMI tables need a blank NULL tail.
fixes the crash on Ingo's test box.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch against tip/x86/iommu virtually reverts
2842e5bf31. But just reverting the
commit breaks AMD IOMMU so this patch also includes some fixes.
The above commit adds new two options to x86 IOMMU generic kernel boot
options, fullflush and nofullflush. But such change that affects all
the IOMMUs needs more discussion (all IOMMU parties need the chance to
discuss it):
http://lkml.org/lkml/2008/9/19/106
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There's a small window when NMI watchdog is being set up that if any NMIs
are triggered, the NMI code will make make use of not initalized wd_ops
elements:
void setup_apic_nmi_watchdog(void *unused)
{
if (__get_cpu_var(wd_enabled))
return;
/* cheap hack to support suspend/resume */
/* if cpu0 is not active neither should the other cpus */
if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
return;
switch (nmi_watchdog) {
case NMI_LOCAL_APIC:
/* enable it before to avoid race with handler */
--> __get_cpu_var(wd_enabled) = 1;
--> if (lapic_watchdog_init(nmi_hz) < 0) {
(...)
asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs)
{
(...)
if (nmi_watchdog_tick(regs, reason))
return;
(...)
notrace __kprobes int
nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
{
(...)
if (!__get_cpu_var(wd_enabled))
return rc;
switch (nmi_watchdog) {
case NMI_LOCAL_APIC:
rc |= lapic_wd_event(nmi_hz);
(...)
int lapic_wd_event(unsigned nmi_hz)
{
struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
u64 ctr;
--> rdmsrl(wd->perfctr_msr, ctr);
and wd->*_msr will be initialized on each processor type specific setup, after
enabling NMIs for PMIs. Since the counter was just set, the chances of an
performance counter generated NMI is minimal, but any other unknown NMI would
trigger the problem. This patch fixes the problem by setting everything up
before enabling performance counter generated NMIs and will set wd_enabled
using a callback function.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
P4s have a quirk that makes necessary to clear P4_CCCR_OVF bit on the CCCR
everytime the PMI is triggered. When booting the kernel with reset_devices
(more specific kdump case), the counters reach zero and the PMI will be
generated. This is not a problem on other processors but on P4s, it'll
continue to generate NMIs until that bit is cleared. Since there may be
other users of the performance counters, clear and disable all of them
when booting with reset_devices option.
We have a P4 box here that crashes because of this problem. Since the kdump
kernel usually boots with only one processor active, the second logical
unit won't be set up, therefore, MSR_P4_IQ_CCCR1 (and other performance
counter registers) won't be cleared and P4_CCCR_OVF may be still set because
the previous kernel was using this register. An NMI is triggered because of
the MSR_P4_IQ_CCCR1 right after the NMI delivery is enabled, triggering the
race fixed on my previous email.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86 has set_bit_string() that does the exact same thing that
set_bit_area() in lib/iommu-helper.c does.
This patch exports set_bit_area() in lib/iommu-helper.c as
iommu_area_reserve(), converts GART, Calgary, and AMD IOMMU to use it.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so could help catch attention about bug in bios about mtrr mask setting.
WARN_ONCE got into mainline already, lets use it.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a check for ioremap() failure in copy_oldmem_page().
This patch also includes small coding style fixes.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The bad_bios_dmi_table() quirk never triggered because we do DMI setup
too late. Move it a bit earlier.
Also change the CONFIG_X86_RESERVE_LOW_64K quirk to operate on the e820
table directly instead of messing with early reservations - this handles
overlaps (which do occur in this low range of RAM) more gracefully.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
the exact timing of the corruption check isn't too important (it's once a
minute timer), use round_jiffies() to align it and avoid extra wakeups.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The alloc_coherent implementation for AMD IOMMU currently uses
*dev->dma_mask per default. This patch changes it to prefer
dev->coherent_dma_mask if it is set.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The command buffer release function uses the CMD_BUF_SIZE macro for
get_order. Replace this with iommu->cmd_buf_size which is more reliable
about the actual size of the buffer.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current calculation of the IVHD entry size is hard to read. So move
this code to a seperate function to make it more clear what this
calculation does.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ctrl variable is only u32 and readl also returns a 32 bit value. So
the cast to u64 is pointless. Remove it with this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The amd_iommu_pd_alloc_bitmap is allocated with a calculated order and
freed with order 1. This is not a bug since the calculated order always
evaluates to 1, but its unclean code. So replace the 1 with the
calculation in the release path.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current calculation is very complicated. This patch replaces it with
a much simpler version.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the memset and use __GFP_ZERO at allocation time instead.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86's common alloc_coherent (dma_alloc_coherent in dma-mapping.h) sets
up the gfp flag according to the device dma_mask but AMD IOMMU doesn't
need it for devices that the IOMMU can do virtual mappings for. This
patch avoids unnecessary low zone allocation.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove some magic numbers and split the pte_root using standard
functions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In isolation mode the protection domains for the devices are
preallocated and preassigned. This is bad if a device should be passed
to a virtualization guest because the IOMMU code does not know if it is
in use by a driver. This patch changes the code to assign the device to
the preallocated domain only if there are dma mapping requests for it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This function determines if the AMD IOMMU implementation is responsible
for a given device. So the DMA layer can get this information from the
driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is a bit in the device entry to suppress all IO page faults
generated by a device. This bit was set until now because there was no
event logging. Now that there is event logging this patch allows IO page
faults from devices to see them in the kernel log.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The code to log IOMMU events is in place now. So enable event logging
with this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds code for polling and printing out events generated by
the AMD IOMMU.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The AMD IOMMU can generate interrupts for various reasons. This patch
adds the basic interrupt enabling infrastructure to the driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need the pci_dev later anyways to enable MSI for the IOMMU hardware.
So remove the devid pointing to the BDF and replace it with the pci_dev
structure where the IOMMU is implemented.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the pci_seg field to the amd_iommu structure and fills
it with the corresponding value from the ACPI table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the allocation of a event buffer for each AMD IOMMU in
the system. The hardware will log events like device page faults or
other errors to this buffer once this is enabled.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The API definition for dma_alloc_coherent states that the bus address
has to be aligned to the next power of 2 boundary greater than the
allocation size. This is violated by AMD IOMMU so far and this patch
fixes it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds branch hints to the cecks if a completion_wait is
necessary. The completion_waits in the mapping paths are unlikly because
they will only happen on software implementations of AMD IOMMU which
don't exists today or with lazy IO/TLB flushing when the allocator wraps
around the address space. With lazy IO/TLB flushing the completion_wait
in the unmapping path is unlikely too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The IO/TLB flushing on every unmaping operation is the most expensive
part in AMD IOMMU code and not strictly necessary. It is sufficient to
do the flush before any entries are reused. This is patch implements
lazy IO/TLB flushing which does exactly this.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The GART currently implements the iommu=[no]fullflush command line
parameters which influence its IO/TLB flushing strategy. This patch
makes these parameters generic so that they can be used by the AMD IOMMU
too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch moves the invocation of the flushing functions to the
map/unmap helpers because its common code in all dma_ops relevant
mapping/unmapping code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently AMD IOMMU code triggers a BUG_ON if NULL is passed as the
device. This is inconsistent with other IOMMU implementations.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix this warning reported by Andrew Morton:
> arch/x86/kernel/cpu/mtrr/main.c: In function 'mtrr_bp_init':
> arch/x86/kernel/cpu/mtrr/main.c:1170: warning: 'extra_remove_base' may be used uninitialized in this function
the warning is bogus but the logic that prevents uninitialized use
is a bit convoluted so simplify it all.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The unlocked polling of the ComWaitInt bit in the IOMMU completion wait
path is racy. Protect it with the iommu lock.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The iommu->need_sync flag must be set after the command is queued to
avoid race conditions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
in order to diagnose hard system specific issues, it's useful to
have the system name in the oops (as provided by DMI)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Completely disable NOPL on 32 bits. It turns out that Microsoft
Virtual PC is so broken it can't even reliably *fail* in the presence
of NOPL.
This leaves the infrastructure in place but disables it
unconditionally.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=11237
Documents a wide range of systems where the BIOS utilizes the first
64K of physical memory during suspend/resume and other hardware events.
Currently we reserve this memory on all AMI and Phoenix BIOS systems.
Life is too short to hunt subtle memory corruption problems like this,
so we try to be robust by default.
Still, allow this to be overriden: allow users who want that first 64K
of memory to be available to the kernel disable the quirk, via
CONFIG_X86_RESERVE_LOW_64K=n.
Also, allow the early reservation to overlap with other
early reservations.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
there's multiple reports about suspend/resume related low memory
corruption in this bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=11237
the common pattern is that the corruption is caused by the BIOS,
and that it affects some portion of the first 64K of physical RAM.
So add a DMI quirk
This will waste 64K RAM on 'good' systems too, but without knowing
the exact nature of this BIOS memory corruption this is the safest
approach.
This might as well solve a wide range of suspend/resume breakages
under Linux.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
