Commit graph

227 commits

Author SHA1 Message Date
David Teigland
755b5eb8ba dlm: limit dir lookup loop
In a rare case we may need to repeat a local resource directory lookup
due to a race with removing the rsb and removing the resdir record.
We'll never need to do more than a single additional lookup, though,
so the infinite loop around the lookup can be removed.  In addition
to being unnecessary, the infinite loop is dangerous since some other
unknown condition may appear causing the loop to never break.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland
42dc1601a9 dlm: reject normal unlock when lock is waiting for lookup
Non-forced unlocks should be rejected if the lock is waiting on the
rsb_lookup list for another lock to establish the master node.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland
c54e04b00f dlm: validate messages before processing
There was some hit and miss validation of messages that has now been
cleaned up and unified.  Before processing a message, the new
validate_message() function checks that the lkb is the appropriate type,
process-copy or master-copy, and that the message is from the correct
nodeid for the the given lkb.  Other checks and assertions on the
lkb type and nodeid have been removed.  The assertions were particularly
bad since they would panic the machine instead of just ignoring the bad
message.

Although other recent patches have made processing old message unlikely,
it still may be possible for an old message to be processed and caught
by these checks.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland
46b43eed70 dlm: reject messages from non-members
Messages from nodes that are no longer members of the lockspace should be
ignored.  When nodes are removed from the lockspace, recovery can
sometimes complete quickly enough that messages arrive from a removed node
after recovery has completed.  When processed, these messages would often
cause an error message, and could in some cases change some state, causing
problems.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland
aec64e1be2 dlm: another call to confirm_master in receive_request_reply
When a failed request (EBADR or ENOTBLK) is unlocked/canceled instead of
retried, there may be other lkb's waiting on the rsb_lookup list for it
to complete.  A call to confirm_master() is needed to move on to the next
waiting lkb since the current one won't be retried.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland
601342ce02 dlm: recover locks waiting for overlap replies
When recovery looks at locks waiting for replies, it fails to consider
locks that have already received a reply for their first remote operation,
but not received a reply for secondary, overlapping unlock/cancel.  The
appropriate stub reply needs to be called for these waiters.

Appears when we start doing recovery in the presence of a many overlapping
unlock/cancel ops.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland
8a358ca8e7 dlm: clear ast_type when removing from astqueue
The lkb_ast_type field indicates whether the lkb is on the astqueue list.
When clearing locks for a process, lkb's were being removed from the astqueue
list without clearing the field.  If release_lockspace then happened
immediately afterward, it could try to remove the lkb from the list a second
time.

Appears when process calls libdlm dlm_release_lockspace() which first
closes the ls dev triggering clear_proc_locks, and then removes the ls
(a write to control dev) causing release_lockspace().

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
David Teigland
861e2369e9 dlm: use fixed errno values in messages
Some errno values differ across platforms. So if we return things like
-EINPROGRESS from one node it can get misinterpreted or rejected on
another one.

This patch fixes up the errno values passed on the wire so that they
match the x86 ones (so as not to break the protocol), and re-instates
the platform-specific ones at the other end.

Many thanks to Fabio for testing this patch.
Initial patch from Patrick.

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:42 -06:00
Fabio M. Di Nitto
550283e30c dlm: swap bytes for rcom lock reply
DLM_RCOM_LOCK_REPLY messages need byte swapping.

Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:41 -06:00
Fabio M. Di Nitto
e7847d35ac dlm: align midcomms message buffer
gcc does not guarantee that an auto buffer is 64bit aligned.
This change allows sparc64 to work.

Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:25 -06:00
Patrick Caulfeld
39bd4177dd dlm: close othercons
This patch addresses a problem introduced with the last round of
lowcomms patches where the 'othercon' connections do not get freed when
the DLM shuts down.

This results in the error message
"slab error in kmem_cache_destroy(): cache `dlm_conn': Can't free all
objects"

and the DLM cannot be restarted without a system reboot.

See bz#428119

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:17:32 -06:00
David Teigland
52bda2b5ba dlm: use dlm prefix on alloc and free functions
The dlm functions in memory.c should use the dlm_ prefix.  Also, use
kzalloc/kfree directly for dlm_direntry's, removing the wrapper functions.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:17:19 -06:00
David Teigland
11b2498ba7 dlm: don't print common non-errors
Change log_error() to log_debug() for conditions that can occur in
large number in normal operation.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:17:08 -06:00
Adrian Bunk
e028398da7 dlm: proper prototypes
This patch adds a proper prototype for some functions in
fs/dlm/dlm_internal.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 17:16:52 -06:00
Lon Hohberger
6bd8fedaa1 dlm: bind connections from known local address when using TCP
A common problem occurs when multiple IP addresses within the same
subnet are assigned to the same NIC.  If we make a connection attempt to
another address on the same subnet as one of those addresses, the
connection attempt will not necessarily be routed from the address we
want.

In the case of the DLM, the other nodes will quickly drop the connection
attempt, causing problems.

This patch makes the DLM bind to the local address it acquired from the
cluster manager when using TCP prior to making a connection, obviating
the need for administrators to "fix" their systems or use clever routing
tricks.

Signed-off-by: Lon Hohberger <lhh@redhat.com>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29 16:44:25 -06:00
Greg Kroah-Hartman
197b12d679 Kobject: convert fs/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
901195ed7f Kobject: change GFS2 to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:26 -08:00
Greg Kroah-Hartman
0ff21e4663 kobject: convert kernel_kset to be a kobject
kernel_kset does not need to be a kset, but a much simpler kobject now
that we have kobj_attributes.

We also rename kernel_kset to kernel_kobj to catch all users of this
symbol with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:24 -08:00
Greg Kroah-Hartman
bd35b93d80 kset: convert kernel_subsys to use kset_create
Dynamically create the kset instead of declaring it statically.  We also
rename kernel_subsys to kernel_kset to catch all users of this symbol
with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:14 -08:00
Greg Kroah-Hartman
d405936b32 kset: convert dlm to use kset_create
Dynamically create the kset instead of declaring it statically.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:14 -08:00
Greg Kroah-Hartman
3514faca19 kobject: remove struct kobj_type from struct kset
We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:10 -08:00
David S. Miller
df61c95262 [DLM] lowcomms: Do not muck with sysctl_rmem_max.
Use SO_RCVBUFFORCE instead.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07 04:11:42 -08:00
Pavel Emelyanov
ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Jan Engelhardt
a77b645609 menuconfig: transform NLS and DLM menus
Changes NLS and DLM menus into a 'menuconfig' object so that it can be
disabled at once without having to enter the menu first to disable the config
option.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:00 -07:00
Linus Torvalds
efefc6eb38 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits)
  PM: merge device power-management source files
  sysfs: add copyrights
  kobject: update the copyrights
  kset: add some kerneldoc to help describe what these strange things are
  Driver core: rename ktype_edd and ktype_efivar
  Driver core: rename ktype_driver
  Driver core: rename ktype_device
  Driver core: rename ktype_class
  driver core: remove subsystem_init()
  sysfs: move sysfs file poll implementation to sysfs_open_dirent
  sysfs: implement sysfs_open_dirent
  sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir
  sysfs: make sysfs_root a regular directory dirent
  sysfs: open code sysfs_attach_dentry()
  sysfs: make s_elem an anonymous union
  sysfs: make bin attr open get active reference of parent too
  sysfs: kill unnecessary NULL pointer check in sysfs_release()
  sysfs: kill unnecessary sysfs_get() in open paths
  sysfs: reposition sysfs_dirent->s_mode.
  sysfs: kill sysfs_update_file()
  ...
2007-10-12 15:49:37 -07:00
Greg Kroah-Hartman
34980ca8fa Drivers: clean up direct setting of the name of a kset
A kset should not have its name set directly, so dynamically set the
name at runtime.

This is needed to remove the static array in the kobject structure which
will be changed in a future patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:02 -07:00
David Teigland
c36258b592 [DLM] block dlm_recv in recovery transition
Introduce a per-lockspace rwsem that's held in read mode by dlm_recv
threads while working in the dlm.  This allows dlm_recv activity to be
suspended when the lockspace transitions to, from and between recovery
cycles.

The specific bug prompting this change is one where an in-progress
recovery cycle is aborted by a new recovery cycle.  While dlm_recv was
processing a recovery message, the recovery cycle was aborted and
dlm_recoverd began cleaning up.  dlm_recv decremented recover_locks_count
on an rsb after dlm_recoverd had reset it to zero.  This is fixed by
suspending dlm_recv (taking write lock on the rwsem) before aborting the
current recovery.

The transitions to/from normal and recovery modes are simplified by using
this new ability to block dlm_recv.  The switch from normal to recovery
mode means dlm_recv goes from processing locking messages, to saving them
for later, and vice versa.  Races are avoided by blocking dlm_recv when
setting the flag that switches between modes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:38 +01:00
Patrick Caulfield
b434eda6fd [DLM] don't overwrite castparam if it's NULL
If the castaddr passed to the userland API is NULL then don't overwrite the
existing castparam. This allows a different thread to cancel a lock request and
the CANCEL AST gets delivered to the original thread.

bz#306391 (for RHEL4) refers.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:36 +01:00
Patrick Caulfield
d66f8277f5 [DLM] Make dlm_sendd cond_resched more
Under high recovery loads dlm_sendd can monopolise the CPU and cause soft lockups.

This one extra and one moved cond_resched() make it yield a little more during
such times keeping work moving.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:19 +01:00
Patrick Caulfield
61d96be0f4 [DLM] Fix lowcomms socket closing
This patch fixes the slight mess made in lowcomms closing by previous patches
and fixes all sorts of DLM hangs.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:55:39 +01:00
David Teigland
3650925893 [DLM] fix basts for granted PR waiting CW
Fix a long standing bug where a blocking callback would be missed
when there's a granted lock in PR mode and waiting locks in both
PR and CW modes (and the PR lock was added to the waiting queue
before the CW lock).  The logic simply compared the numerical values
of the modes to determine if a blocking callback was required, but in
the one case of PR and CW, the lower valued CW mode blocks the higher
valued PR mode.  We just need to add a special check for this PR/CW
case in the tests that decide when a blocking callback is needed.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-14 10:31:02 +01:00
Patrick Caulfield
9e5f2825a8 [DLM] More othercon fixes
The last patch to clean out 'othercon' structures only fixed half the problem.
The attached addresses the other situations too, and fixes bz#238490

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-14 10:30:36 +01:00
Jesper Juhl
1a2bf2eefb [DLM] Fix memory leak in dlm_add_member() when dlm_node_weight() returns less than zero
There's a memory leak in fs/dlm/member.c::dlm_add_member().

If "dlm_node_weight(ls->ls_name, nodeid)" returns < 0, then
we'll return without freeing the memory allocated to the (at
that point yet unused) 'memb'.
This patch frees the allocated memory in that case and thus
avoids the leak.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-14 10:30:04 +01:00
Patrick Caulfield
01c8cab258 [DLM] zero unused parts of sockaddr_storage
When we build a sockaddr_storage for an IP address, clear the unused parts as
they could be used for node comparisons.

I have seen this occasionally make sctp connections fail.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-14 10:29:27 +01:00
David Teigland
41684f9547 [DLM] fix NULL ls usage
Fix regression in recent patch "[DLM] variable allocation" which
attempts to dereference an "ls" struct when it's NULL.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-14 10:28:44 +01:00
Patrick Caulfield
25720c2d73 [DLM] Clear othercon pointers when a connection is closed
This patch clears the othercon pointer and frees the memory when a connnection
is closed. This could cause a small memory leak when nodes leave the cluster.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-08-14 10:28:05 +01:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Yoann Padioleau
dd00cc486a some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Joel Becker
e6bd07aee7 configfs: Convert subsystem semaphore to mutex
Convert the su_sem member of struct configfs_subsystem to a struct
mutex, as that's what it is. Also convert all the users and update
Documentation/configfs.txt and Documentation/configfs_example.c
accordingly.

[ Conflict in fs/dlm/config.c with commit
  3168b0780d manually resolved. --Mark ]

Inspired-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-10 17:10:56 -07:00
Satyam Sharma
3fe6c5ce11 [PATCH] configfs+dlm: Rename config_group_find_obj and state semantics clearly
Configfs being based upon sysfs code, config_group_find_obj() is probably
so named because of the similar kset_find_obj() in sysfs. However,
"kobject"s in sysfs become "config_item"s in configfs, so let's call it
config_group_find_item() instead, for sake of uniformity, and make
corresponding change in the users of this function.

BTW a crucial difference between kset_find_obj and config_group_find_item
is in locking expectations. kset_find_obj does its locking by itself, but
config_group_find_item expects the *caller* to do the locking. The reason
for this: kset's have their own locks, config_group's don't but instead
rely on the subsystem mutex. And, subsystem needn't necessarily be around
when config_group_find_item() is called.

So let's state these locking semantics explicitly, and rectify the comment,
otherwise bugs could continue to occur in future, as they did in the past
(refer commit d82b8191e238 in gfs2-2.6-fixes.git).

[ I also took the opportunity to fix some bad whitespace and
double-empty lines. --Joel ]

[ Conflict in fs/dlm/config.c with commit
  3168b0780d manually resolved. --Mark ]

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-10 17:02:31 -07:00
Satyam Sharma
9b1d9aa4e9 [PATCH] configfs+dlm: Separate out __CONFIGFS_ATTR into configfs.h
fs/dlm/config.c contains a useful generic macro called __CONFIGFS_ATTR
that is similar to sysfs' __ATTR macro that makes defining attributes
easy for any user of configfs. Separate it out into configfs.h so that
other users (forthcoming in dynamic netconsole patchset) can use it too.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-10 16:52:27 -07:00
David Teigland
ac90a25525 [DLM] dump more lock values
Add two more output fields (lkb_flags and rsb nodeid) to the new debugfs
file that dumps one lock per line.  Also, dump all locks instead of just
mastered locks.  Accordingly, use a suffix of _locks instead of _master.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:24:13 +01:00
akpm@linux-foundation.org
f4fadb23ca [GFS2] git-gfs2-nmw-build-fix
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:24:06 +01:00
Patrick Caulfield
97d848365e [DLM] Telnet to port 21064 can stop all lockspaces
This patch fixes Red Hat bz#245892

Opening a tcp connection from a cluster member to another cluster member
targeting the dlm port it is enough to stop every dlm operation in the cluster.
This means that GFS and rgmanager will hang.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:57 +01:00
David Teigland
fad59c1390 [DLM] don't require FS flag on all nodes
Mask off the recently added DLM_LSFL_FS flag when setting the exflags.
This way all the nodes in the lockspace aren't required to have the FS
flag set, since we later check that exflags matches among all nodes.

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:38 +01:00
Patrick Caulfield
44f487a553 [DLM] variable allocation
Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace.
This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL.
(This updated version of the patch uses gfp_t for ls_allocation.)

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-Off-By: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:17 +01:00
Josef Bacik
292e539e93 [DLM] fix reference counting
This is a fix for the patch

021d2ff3a08019260a1dc002793c92d6bf18afb6

I left off a dlm_hold_rsb which causes the box to panic if you try to use
debugfs.  This patch fixes the problem.  Sorry about that,

Signed-off-by: Josef Bacik <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:15 +01:00
Patrick Caulfield
afb853fb4e [DLM] fix socket shutdown
This patch clears the user_data of active sockets as part of cleanup.
This prevents any late-arriving data from trying to add jobs to the work
queue while we are tidying up.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-Off-By: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:05 +01:00
David Teigland
0b7cac0fb0 [DLM] show default protocol
Display the initial value of the "protocol" config value in configfs.
The default value has always been 0 in the past anyway, so it's always
appeared to be correct.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:59 +01:00
David Teigland
9dd592d70b [DLM] dumping master locks
Add a new debugfs file that dumps a compact list of mastered locks.
This will be used by a userland daemon to collect state for deadlock
detection.

Also, for the existing function that prints all lock state, lock the rsb
before going through the lock lists since they can be changing in the
course of normal dlm activity.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:56 +01:00
David Teigland
8b4021fa43 [DLM] canceling deadlocked lock
Add a function that can be used through libdlm by a system daemon to cancel
another process's deadlocked lock.  A completion ast with EDEADLK is returned
to the process waiting for the lock.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:54 +01:00
David Teigland
84d8cd69a8 [DLM] timeout fixes
Various fixes related to the new timeout feature:
- add_timeout() missed setting TIMEWARN flag on lkb's when the
  TIMEOUT flag was already set
- clear_proc_locks should remove a dead process's locks from the
  timeout list
- the end-of-life calculation for user locks needs to consider that
  ETIMEDOUT is equivalent to -DLM_ECANCEL
- make initial default timewarn_cs config value visible in configfs
- change bit position of TIMEOUT_CANCEL flag so it's not copied to
  a remote master node
- set timestamp on remote lkb's so a lock dump will display the time
  they've been waiting

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:52 +01:00
Steven Whitehouse
b3cab7b9a3 [DLM] Compile fix
A one liner fix which got missed from the earlier patches.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Fabio Massimo Di Nitto <fabbione@ubuntu.com>
Cc: David Teigland <teigland@redhat.com>
2007-07-09 08:22:49 +01:00
David Teigland
639aca417d [DLM] fix compile breakage
In the rush to get the previous patch set sent, a compilation bug I fixed
shortly before sending somehow got clobbered, probably by a missed quilt
refresh or something.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:45 +01:00
David Teigland
8b0e7b2cf3 [DLM] wait for config check during join [6/6]
Joining the lockspace should wait for the initial round of inter-node
config checks to complete before returning.  This way, if there's a
configuration mismatch between the joining node and the existing nodes,
the join can fail and return an error to the application.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:42 +01:00
David Teigland
79d72b5448 [DLM] fix new_lockspace error exit [5/6]
Fix the error path when exiting new_lockspace().  It was kfree'ing the
lockspace struct at the end, but that's only valid if it exits before
kobject_register occured.  After kobject_register we have to let the
kobject do the freeing.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:40 +01:00
David Teigland
c85d65e914 [DLM] cancel in conversion deadlock [4/6]
When conversion deadlock is detected, cancel the conversion and return
EDEADLK to the application.  This is a new default behavior where before
the dlm would allow the deadlock to exist indefinately.

The DLM_LKF_NODLCKWT flag can now be used in a conversion to prevent the
dlm from performing conversion deadlock detection/cancelation on it.
The DLM_LKF_CONVDEADLK flag can continue to be used as before to tell the
dlm to demote the granted mode of the lock being converted if it gets into
a conversion deadlock.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:38 +01:00
David Teigland
d7db923ea4 [DLM] dlm_device interface changes [3/6]
Change the user/kernel device interface used by libdlm:
- Add ability for userspace to check the version of the interface.  libdlm
  can now adapt to different versions of the kernel interface.
- Increase the size of the flags passed in a lock request so all possible
  flags can be used from userspace.
- Add an opaque "xid" value for each lock.  This "transaction id" will be
  used later to associate locks with each other during deadlock detection.
- Add a "timeout" value for each lock.  This is used along with the
  DLM_LKF_TIMEOUT flag.

Also, remove a fragment of unused code in device_read().

This patch requires updating libdlm which is backward compatible with
older kernels.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:36 +01:00
David Teigland
3ae1acf93a [DLM] add lock timeouts and warnings [2/6]
New features: lock timeouts and time warnings.  If the DLM_LKF_TIMEOUT
flag is set, then the request/conversion will be canceled after waiting
the specified number of centiseconds (specified per lock).  This feature
is only available for locks requested through libdlm (can be enabled for
kernel dlm users if there's a use for it.)

If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then
a warning message will be sent to userspace (using genetlink) after a
request/conversion has been waiting for a given number of centiseconds
(configurable per node).  The time warnings will be used in the future
to do deadlock detection in userspace.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:33 +01:00
David Teigland
85e86edf95 [DLM] block scand during recovery [1/6]
Don't let dlm_scand run during recovery since it may try to do a resource
directory removal while the directory nodes are changing.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:31 +01:00
Josef Bacik
916297aad5 [DLM] keep dlm from panicing when traversing rsb list in debugfs
This problem was originally reported against GFS6.1, but the same issue exists
in upstream DLM.  This patch keeps the rsb iterator assigning under the rsbtbl
list lock.  Each time we process an rsb we grab a reference to it to make sure
it is not freed out from underneath us, and then put it when we get the next rsb
in the list or move onto another list.

Signed-off-by: Josef Bacik <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:29 +01:00
Satyam Sharma
3168b0780d [DLM] fix a couple of races
Fix two races in fs/dlm/config.c:

(1) Grab the configfs subsystem semaphore before calling
config_group_find_obj() in get_space(). This solves a potential race
between get_space() and concurrent mkdir(2) or rmdir(2).

(2) Grab a reference on the found config_item _while_ holding the configfs
subsystem semaphore in get_comm(), and not after it. This solves a
potential race between get_comm() and concurrent rmdir(2).

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:10 +01:00
Adrian Bunk
95511ad434 DLM must depend on SYSFS
The dependency of DLM on SYSFS got lost in
commit 6ed7257b46 resulting in the
following compile error with CONFIG_DLM=y, CONFIG_SYSFS=n:

<--  snip  -->

...
  LD      .tmp_vmlinux1
fs/built-in.o: In function `dlm_lockspace_init':
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/dlm/lockspace.c:231: undefined reference to `kernel_subsys'
fs/built-in.o: In function `configfs_init':
/home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/configfs/mount.c:143: undefined reference to `kernel_subsys'
make[1]: *** [.tmp_vmlinux1] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-07 14:17:43 -07:00
Linus Torvalds
5cefcab3db Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (34 commits)
  [GFS2] Uncomment sprintf_symbol calling code
  [DLM] lowcomms style
  [GFS2] printk warning fixes
  [GFS2] Patch to fix mmap of stuffed files
  [GFS2] use lib/parser for parsing mount options
  [DLM] Lowcomms nodeid range & initialisation fixes
  [DLM] Fix dlm_lowcoms_stop hang
  [DLM] fix mode munging
  [GFS2] lockdump improvements
  [GFS2] Patch to detect corrupt number of dir entries in leaf and/or inode blocks
  [GFS2] bz 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump)
  [DLM] fs/dlm/ast.c should #include "ast.h"
  [DLM] Consolidate transport protocols
  [DLM] Remove redundant assignment
  [GFS2] Fix bz 234168 (ignoring rgrp flags)
  [DLM] change lkid format
  [DLM] interface for purge (2/2)
  [DLM] add orphan purging code (1/2)
  [DLM] split create_message function
  [GFS2] Set drop_count to 0 (off) by default
  ...
2007-05-07 12:26:27 -07:00
Greg Kroah-Hartman
823bccfc40 remove "struct subsystem" as it is no longer needed
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 18:57:59 -07:00
David Teigland
617e82e10c [DLM] lowcomms style
Replace some printk with log_print, and fix some simple cases of lines
over 80.  Also, return -ENOTCONN if lowcomms_start fails due to no local
IP address being available.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:51 +01:00
Patrick Caulfield
30d3a2373f [DLM] Lowcomms nodeid range & initialisation fixes
Fix a few range & initialization bugs in lowcomms.
- max_nodeid is really the highest nodeid encountered, so all loops must include
it in their iterations.
- clean dlm_local_count & connection_idr so we can do a clean restart.
- Remove a spurious BUG_ON

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:41 +01:00
Josef Bacik
2439fe5072 [DLM] Fix dlm_lowcoms_stop hang
When you attempt to release a lockspace in DLM, it will hang trying to down a
semaphore that has already been downed.  The attached patch fixes the problem.

Signed-off-by: Josef Bacik <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Patrick Caulfield <pcaulfie@redhat.com>
2007-05-01 09:11:38 +01:00
David Teigland
7d3c1feb80 [DLM] fix mode munging
There are flags to enable two specialized features in the dlm:
1. CONVDEADLK causes the dlm to resolve conversion deadlocks internally by
   changing the granted mode of locks to NL.
2. ALTPR/ALTCW cause the dlm to change the requested mode of locks to PR
   or CW to grant them if the normal requested mode can't be granted.

GFS direct i/o exercises both of these features, especially when mixed
with buffered i/o.  The dlm has problems with them.

The first problem is on the master node. If it demotes a lock as a part of
converting it, the actual step of converting the lock isn't being done
after the demotion, the lock is just left sitting on the granted queue
with a granted mode of NL.  I think the mistaken assumption was that the
call to grant_pending_locks() would grant it, but that function naturally
doesn't look at locks on the granted queue.

The second problem is on the process node.  If the master either demotes
or gives an altmode, the munging of the gr/rq modes is never done in the
process copy of the lock, leaving the master/process copies out of sync.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:36 +01:00
Adrian Bunk
8fa1de386f [DLM] fs/dlm/ast.c should #include "ast.h"
Every file should include the headers containing the prototypes for
it's global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:25 +01:00
Patrick Caulfield
6ed7257b46 [DLM] Consolidate transport protocols
This patch consolidates the TCP & SCTP protocols for the DLM into a single file
and makes it switchable at run-time (well, at least before the DLM actually
starts up!)

For RHEL5 this patch requires Neil Horman's patch that expands the in-kernel
socket API but that has already been twice ACKed so it should be OK.

The patch adds a new lowcomms.c file that replaces the existing lowcomms-sctp.c
& lowcomms-tcp.c files.

Signed-off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:23 +01:00
Patrick Caulfield
fc7c44f03d [DLM] Remove redundant assignment
This patch removes a redundant (and incorrect) assignment from compat_output

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:20 +01:00
David Teigland
ce03f12b37 [DLM] change lkid format
A lock id is a uint32 and is used as an opaque reference to the lock.  For
userland apps, the lkid is passed up, through libdlm, as the return value
from a write() on the dlm device.  This created a problem when the high
bit was 1, making the lkid look like an error.  This is fixed by changing
how the lkid is composed.  The low 16 bits identified the hash bucket for
the lock and the high 16 bits were a per-bucket counter (which eventually
hit 0x8000 causing the problem).  These are simply swapped around; the
number of hash table buckets is far below 0x8000, making all lkid's
positive when viewed as signed.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:15 +01:00
David Teigland
72c2be776b [DLM] interface for purge (2/2)
Add code to accept purge commands from userland.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:12 +01:00
David Teigland
8499137d4e [DLM] add orphan purging code (1/2)
Add code for purging orphan locks.  A process can also purge all of its
own non-orphan locks by passing a pid of zero.  Code already exists for
processes to create persistent locks that become orphans when the process
exits, but the complimentary capability for another process to then purge
these orphans has been missing.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:10 +01:00
David Teigland
7e4dac3359 [DLM] split create_message function
This splits the current create_message() function into two parts so that
later patches can call the new lower-level _create_message() function when
they don't have an rsb struct.  No functional change in this patch.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:07 +01:00
David Teigland
ef0c2bb05f [DLM] overlapping cancel and unlock
Full cancel and force-unlock support.  In the past, cancel and force-unlock
wouldn't work if there was another operation in progress on the lock.  Now,
both cancel and unlock-force can overlap an operation on a lock, meaning there
may be 2 or 3 operations in progress on a lock in parallel.  This support is
important not only because cancel and force-unlock are explicit operations
that an app can use, but both are used implicitly when a process exits while
holding locks.

Summary of changes:

- add-to and remove-from waiters functions were rewritten to handle situations
  with more than one remote operation outstanding on a lock

- validate_unlock_args detects when an overlapping cancel/unlock-force
  can be sent and when it needs to be delayed until a request/lookup
  reply is received

- processing request/lookup replies detects when cancel/unlock-force
  occured during the op, and carries out the delayed cancel/unlock-force

- manipulation of the "waiters" (remote operation) state of a lock moved under
  the standard rsb mutex that protects all the other lock state

- the two recovery routines related to locks on the waiters list changed
  according to the way lkb's are now locked before accessing waiters state

- waiters recovery detects when lkb's being recovered have overlapping
  cancel/unlock-force, and may not recover such locks

- revert_lock (cancel) returns a value to distinguish cases where it did
  nothing vs cases where it actually did a cancel; the cancel completion ast
  should only be done when cancel did something

- orphaned locks put on new list so they can be found later for purging

- cancel must be called on a lock when making it an orphan

- flag user locks (ENDOFLIFE) at the end of their useful life (to the
  application) so we can return an error for any further cancel/unlock-force

- we weren't setting COMP/BAST ast flags if one was already set, so we'd lose
  either a completion or blocking ast

- clear an unread bast on a lock that's become unlocked

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:00 +01:00
Patrick Caulfield
0320672702 [DLM] fix coverity-spotted stupidity
Replacement patch to remove redundant code rather than moving it around.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:57 +01:00
Patrick Caulfield
254da030df [DLM] Don't delete misc device if lockspace removal fails
Currently if the lockspace removal fails the misc device associated with a
lockspace is left deleted. After that there is no way to access the orphaned
lockspace from userland.

This patch recreates the misc device if th dlm_release_lockspace fails. I
believe this is better than attempting to remove the lockspace first because
that leaves an unattached device lying around. The potential gap in which there
is no access to the lockspace between removing the misc device and recreating it
is acceptable ... after all the application is trying to remove it, and only new
users of the lockspace will be affected.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:44 +01:00
Patrick Caulfield
89adc934f3 [DLM] Fix uninitialised variable in receiving
The length of the second element of the kvec array was not initialised before
being added to the first one. This could cause invalid lengths to be passed to
kernel_recvmsg

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:34 +01:00
Adrian Bunk
84c6e8cd35 [DLM] fs/dlm/user.c should #include "user.h"
Every file should include the headers containing the prototypes for
it's global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-07 13:58:21 -05:00
Arjan van de Ven
00977a59b9 [PATCH] mark struct file_operations const 6
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:45 -08:00
Robert P. J. Day
c376222960 [PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the
corresponding "kmem_cache_zalloc()" call.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:27 -08:00
Al Viro
58addbffdd [PATCH] dlm: use kern_recvmsg()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:06 -08:00
Patrick Caulfield
a34fbc6363 [DLM] fix softlockup in dlm_recv
This patch stops the dlm_recv workqueue from busy-waiting when a node
disconnects. This can cause soft lockup errors on debug systems and bad
performance generally.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:38:27 -05:00
David Teigland
62a0f62369 [DLM] zero new user lvbs
A new lvb for a userland lock wasn't being initialized to zero.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:38:24 -05:00
Randy Dunlap
9beeb9f3c5 [DLM/GFS2] indent help text
Indent help text as expected.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:38:20 -05:00
Adrian Bunk
0011727785 [GFS2/DLM] fix GFS2 circular dependency
On Sun, Jan 28, 2007 at 11:08:18AM +0100, Jiri Slaby wrote:
> Andrew Morton napsal(a):
> >Temporarily at
> >
> >	http://userweb.kernel.org/~akpm/2.6.20-rc6-mm1/
>
> Unable to select IPV6. Menuconfig doesn't offer it when INET is selected.
> When it's not it appears in the menu, but after state change it gets away.
> The same behaviour in xconfig, gconfig.
>
> $ mkdir ../a/tst
> $ make O=../a/tst menuconfig
>   HOSTCC  scripts/basic/fixdep
> [...]
>   HOSTLD  scripts/kconfig/mconf
> scripts/kconfig/mconf arch/i386/Kconfig
> Warning! Found recursive dependency: INET GFS2_FS_LOCKING_DLM SYSFS
> OCFS2_FS INET
>
> Maybe this is the problem?

Yes, patch below.

> regards,

cu
Adrian

<--  snip  -->

This patch fixes a circular dependency by letting GFS2_FS_LOCKING_DLM
and DLM depend on instead of select SYSFS.

Since SYSFS depends on EMBEDDED this change shouldn't cause any problems
for users.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:38:08 -05:00
Randy Dunlap
67f55897ee [GFS2/DLM] use sysfs
With CONFIG_DLM=m, CONFIG_PROC_FS=n, and CONFIG_SYSFS=n, kernel build
fails with:

WARNING: "kernel_subsys" [fs/gfs2/locking/dlm/lock_dlm.ko] undefined!
WARNING: "kernel_subsys" [fs/dlm/dlm.ko] undefined!
WARNING: "kernel_subsys" [fs/configfs/configfs.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Since fs/dlm/lockspace.c and fs/gfs2/locking/dlm/sysfs.c use
kernel_subsys, they should either DEPEND on it or SELECT it.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:38:05 -05:00
David Teigland
b790c3b7c3 [DLM] can miss clearing resend flag
A long, complicated sequence of events, beginning with the RESEND flag not
being cleared on an lkb, can result in an unlock never completing.

- lkb on waiters list for remote lookup
- the remote node is both the dir node and the master node, so
  it optimizes the lookup into a request and sends a request
  reply back
- the request reply is saved on the requestqueue to be processed
  after recovery
- recovery runs dlm_recover_waiters_pre() which sets RESEND flag
  so the lookup will be resent after recovery
- end of recovery: process_requestqueue takes saved request reply
  which removes the lkb off the waitesr list, _without_ clearing
  the RESEND flag
- end of recovery: dlm_recover_waiters_post() doesn't do anything
  with the now completed lookup lkb (would usually clear RESEND)
- later, the node unmounts, unlocks this lkb that still has RESEND
  flag set
- the lkb is on the waiters list again, now for unlock, when recovery
  occurs, dlm_recover_waiters_pre() shows the lkb for unlock with RESEND
  set, doesn't do anything since the master still exists
- end of recovery: dlm_recover_waiters_post() takes this lkb off
  the waiters list because it has the RESEND flag set, then reports
  an error because unlocks are never supposed to be handled in
  recover_waiters_post().
- later, the unlock reply is received, doesn't find the lkb on
  the waiters list because recover_waiters_post() has wrongly
  removed it.
- the unlock operation has been lost, and we're left with a
  stray granted lock
- unmount spins waiting for the unlock to complete

The visible evidence of this problem will be a node where gfs umount is
spinning, the dlm waiters list will be empty, and the dlm locks list will
show a granted lock.

The fix is simply to clear the RESEND flag when taking an lkb off the
waiters list.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:50 -05:00
David Teigland
8fd3a98f2c [DLM] saved dlm message can be dropped
dlm_receive_message() returns 0 instead of returning 'error'.  What would
happen is that process_requestqueue would take a saved message off the
requestqueue and call receive_message on it.  receive_message would then
see that recovery had been aborted, set error to EINTR, and 'goto out',
expecting that the error would be returned.  Instead, 0 was always
returned, so process_requestqueue would think that the message had been
processed and delete it instead of saving it to process next time.  This
means the message (usually an unlock in my tests) would be lost.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:47 -05:00
Patrick Caulfield
f1f1c1ccf7 [DLM] Make sock_sem into a mutex
Now that there can be multiple dlm_recv threads running we need to prevent two
recvs running for the same connection - it's unlikely but it can happen and it
causes message corruption.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:44 -05:00
Patrick Caulfield
bd44e2b007 [DLM] fix lowcomms receiving
This patch fixes a bug whereby data on a newly accepted connection would be
ignored if it arrived soon after the accept.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:29 -05:00
Patrick Caulfield
f2f5095f9e [DLM] lowcomms tidy
This patch removes some redundant fields from the connection structure and adds
some lockdep annotation to remove spurious warnings.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:23 -05:00
David Teigland
222d396092 [DLM] fix master recovery
If master recovery happens on an rsb in one recovery sequence, then that
sequence is aborted before lock recovery happens, then in the next
sequence, we rely on the previous master recovery (which may now be
invalid due to another node ignoring a lookup result) and go on do to the
lock recovery where we get stuck due to an invalid master value.

 recovery cycle begins: master of rsb X has left
 nodes A and B send node C an rcom lookup for X to find the new master
 C gets lookup from B first, sets B as new master, and sends reply back to B
 C gets lookup from A next, and sends reply back to A saying B is master
 A gets lookup reply from C and sets B as the new master in the rsb
 recovery cycle on A, B and C is aborted to start a new recovery
 B gets lookup reply from C and ignores it since there's a new recovery
 recovery cycle begins: some other node has joined
 B doesn't think it's the master of X so it doesn't rebuild it in the directory
 C looks up the master of X, no one is master, so it becomes new master
 B looks up the master of X, finds it's C
 A believes that B is the master of X, so it sends its lock to B
 B sends an error back to A
 A resends
 this repeats forever, the incorrect master value on A is never corrected

The fix is to do master recovery on an rsb that still has the NEW_MASTER
flag set from an earlier recovery sequence, and therefore didn't complete
lock recovery.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:58 -05:00
David Teigland
a1bc86e6bd [DLM] fix user unlocking
When a user process exits, we clear all the locks it holds.  There is a
problem, though, with locks that the process had begun unlocking before it
exited.  We couldn't find the lkb's that were in the process of being
unlocked remotely, to flag that they are DEAD.  To solve this, we move
lkb's being unlocked onto a new list in the per-process structure that
tracks what locks the process is holding.  We can then go through this
list to flag the necessary lkb's when clearing locks for a process when it
exits.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:55 -05:00
Patrick Caulfield
1d6e8131cf [DLM] Use workqueues for dlm lowcomms
This patch converts the DLM TCP lowcomms to use workqueues rather than using its
own daemon functions. Simultaneously removing a lot of code and making it more
scalable on multi-processor machines.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:52 -05:00
David Teigland
d200778e12 [DLM] expose dlm_config_info fields in configfs
Make the dlm_config_info values readable and writeable via configfs
entries.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:43 -05:00
David Teigland
99fc64874a [DLM] add config entry to enable log_debug
Add a new dlm_config_info field to enable log_debug output and change
log_debug() to use it.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:40 -05:00
David Teigland
68c817a1c4 [DLM] rename dlm_config_info fields
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we
can use macros to add configfs functions to access them (in a later
patch).  No functional changes in this patch, just naming changes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:37 -05:00