- Change spin_lock + local_irq_save into spin_lock_irqsave
- Change spin_unlock + local_irq_restore into spin_unlock_irqrestore
- Return ENOTTY if ioctl is not recognized as a cris ioctl.
- Make init functions static.
Changes as suggested by Andrew Morton, plus general cleanup to
ease later consolidation of driver into machine common driver.
- Correct parameter type of gpio_write to const char __user *
- Remove volatile from the arrays of machine dependent registers, use
readl and writel to access them instead.
- Remove useless casts of void.
- Use spin_lock_irqsave for locking.
- Break gpio_write into smaller sub-functions.
- Remove useless breaks after returns.
- Don't perform any change in IO_CFG_WRITE_MODE if values are invalid.
(previously values were set and then set to zero)
- Change cast for copy_to_user to (void __user *)
- Make file_operations gpio_fops static and const.
- Make setget_output static. (However, it's still inline since the CRIS
architecture is still not SMP, which makes the function small enough
to inline)
Clean up issues noticed by Andrew Morton:
- Use a combined struct for allocating the mtd_info and nand_chip structs
instead of using anonymous memory as the example in
Documentation/DocBook/mtdnand.tmpl
- Use kzalloc instead of using kmalloc/memset(0)
- Make crisv32_device_ready static.
- Change parameters of gpio_write (const char * buf -> const char __user *buf)
- Don't initialize static variables to zero.
- Remove useless casts from void.
- Change name of interrupt routine (gpio_pa_interrupt -> gpio_interrupt)
- Use kzmalloc instead of allocating memory and zeroing it manually.
- Correct casts for copy_to_user and copy_from_user to (void __user *)
- Make file_operations gpio_fops static.
- Make ioif_watcher static, not used outside this file.
- Move alignment of init data to page size outside define CONFIG_BLK_DEV_INITRD
This avoids oops due to memory on the same page as init data being freed.
- Change hardcoded page size to use macro from asm/page.h
- Add reserved memory via CONFIG_ETRAX_VMEM_SIZE.
- Use available defines for TEXT_TEXT and INITCALLS.
- Cleanup whitespace.
- Slight tweaks, use $acr + addoq to propagate carry across the loop boundary.
- Better use of latency cycles.
- Remove duplicate folding of carry, it is not needed.
- Change include paths to machine specific headers (asm/arch/hwregs -> hwregs)
- Add cpu_possible_map as cpumask_t and export it.
- Drop struct pt_regs parameter from crisv32_ipi_interrupt.
- timer -> timer0
- do_signal now returns void, and does not have the previous signal set
as a parameter.
- Remove sys_rt_sigsuspend, we can use the common one instead.
- Change sys_sigsuspend to be more like x86, don't call do_signal here.
- handle_signal, setup_frame and setup_rt_frame now return -EFAULT
if we've delivered a segfault, which is used by callers to perform
necessary cleanup.
- Break long lines, correct whitespace and formatting errors.
- Change all spin_lock/local_irq_save to spin_lock_irqsave.
- Change multiple returns in functions where we have a lock to goto out.
- Correct number of arguments to gpio_poll_timer_interrupt, gpio_pa_interrupt.
- Break out gpio_write logic to smaller functions to make it readable.
- In setget_input and setget_output, avoid extra if-indent level.
- Change name LED_* -> CRIS_LED_* to avoid name clash.
- Don't use braces around single statement ifs.
- Fix whitespace errors.
- Remove useless CVS id and log.
- Don't use SANITYCHECK(x) as a macro, test FAST_TIMER_SANITY_CHECKS with
ifdef. This makes it possible for automatic indent etc to work.
- Correct some whitespace errors.
- Don't initialize static variable.
- Include pinmux.h from machine specific directory.
- Add some more symbols: crisv32_pinmux_alloc, crisv32_pinmux_dealloc_fixed,
crisv32_io_get_name and crisv32_io_get
- Moved all calls to register_chrdev to a function called by module_init.
- Added mutex locking.
- Added better error handling at start up.
- Added BIN_TO_BCD of the month value before it is saved to the RTC.
- Corrected the month value returned by pcf8563_readreg.
- Cache the voltage low value at driver init so the battery status
information does not get 'accidentally' cleared when setting the RTC time.
- Removed obsolete CONFIG_ETRAX_RTC_READONLY
- Voltage low ioctl():s RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
Fixed a bug where two interfaces using pins in the same pin group could
not be allocated at the same time even if there where no pin collisions.
Change all restore and returns into goto exit pattern.
Also, remove useless CVS id and correct chapter reference for ETRAX100LX
Designer's Reference in comment.
If serial port 2 is used, select it in R_GEN_CONFIG.
If serial port 2 is used, setup the control registers for the port.
This is done to avoid a pulse on the TXD line during start up,
which could disturb some units.
Also, remove useless CVS id and log.
- Move local_irq_save to after possible return in console_write_direct.
- Remove old raw_printk hack, not needed anymore.
- Add watchdog handling.
- Make serial_driver use depend on CONFIG_ETRAX_SERIAL.
- Remove useless CVS log.
- Use mutex instead of spinlock, fixes kernel bugzilla report 8339.
- Make sure that pcf8563_init can be called multiple times but only setup once.
- Change RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
- Cache the voltage low value at driver init so the battery status
information does not get 'accidentally' cleared when setting the RTC time.
- Add weekday handling.
- Correct leapyear handling to include 100 and 400 year exceptions.
- Correct whitespace and formatting errors.
- Remove useless CVS id tag.
- Set the variable first to zero after first setup, so we can
stop multiple calls to i2c_init from trying to setup i2c.
- The last byte read by the master in an i2c transfer needs to
be NACKed, not ACKed.
- Also, remove useless CVS log and CVS id tags.
- Correct include path for sv_addr_ag.h, should be included from asm/arch/
- Remove useless CVS id tag.
- Correct whitespace errors and some formatting.
- Shorten include paths to machine dependent header files.
- Register name for first timer is now regi_timer0.
- Remove raw_printk hack, use oops_in_progress instead.
- Add handling of CPU frequency scaling for CRIS.
- Remove regs parameter to timer_interrupt, get them from get_irq_regs instead.
- Whitespace and formatting changes.
- Remove watchdog handling, handled elsewhere.
- Shorten include paths to machine dependent header files.
- Remove raw_printk hack, we now use oops_in_progress instead.
- Add handling of BUG for exception handlers (break 14).
- Formatting and whitespace changes.
- Shorten include paths for machine dependent header files.
- Remove unused extern declaration of etrax_gpio_wake_up_check.
- Register name for first timer is now regi_timer0.
- First timer register has changed name to timer0.
- Build IRQs with only IRQ number, mask bit will be calculated instead.
- Add more IRQs, up to 64 supported.
- Use arrays to hold which IRQs triggered instead of trying to do magic
with two 32 bit values now that more than 32 IRQs are supported.
- Shorten include paths for machine specific header files.
- Add magic for booting NAND flash.
- Change CONFIG_ETRAXFS_SIM to CONFIG_ETRAX_VCS_SIM.
- Use assembler macros for initializing hardware (clocks)
- Add stubs for SMP slave CPUs.
- Search for cramfs or jffs2 if no romfs found.
- Initialize l2cache.
- Change include path to machine dependent header files.
- Remove __INLINE__, it expands to inline anyway.
- Don't initialize static variables.
- Change timers to use fasttimer_t instead of timevals.
- Change name of timeval_cmp to fasttime_cmp to highlight this.
- Register name for first timer is regi_timer0, not regi_timer.
- Whitespace and formatting changes.
- Don't return if we're blocking interrupts, goto done and restore interrupts.
- Disable interrupts while walking the fasttimer list, only restore
while doing the callback.
- Remove #ifdef DECLARE_WAITQUEUE, this code won't be used in another OS.
- Remove CVS log.
- Shorten include paths to machine dependent headers.
- Add support for fifth serial port.
- Remove CONFIG_ETRAXFS_SIM and CONFIG_ETRAX_DEBUG_PORT_NULL, no longer used.
- Remove raw_printk and stupid_debug hack, no longer needed.
- Remove dummy console stuff, no longer needed.
- Correct some register type names.
- Correct some whitespace errors and formatting.
- Add ifdef for ETRAX_AXISFLASHMAP to avoid compiling file unless it is set.
- Use assembler macros for setting up clocks.
- Don't copy image, just jump to it (only works for NOR flash)
- Shorten include paths to machine specific headers.
- Remove fill_inbuf, not defined here.
- Return __dest as value from memcpy.
- Enable serial port hardware transmitter and receiver in serial_setup.
- Correct baudrate divisor calculation, changed from 4800 to 115200.
- Add support for Artpec-3 specific serial port setup.
- Initialize pinmux for the correct serial port.
- Fixes for NAND and NOR flash booting.
- Use assembler macros for common tasks (clocks, general io etc)
- Use (EtraxFS or Artpec-3) machine specific include for dram and hardware init.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
- Use EXTRA_CFLAGS instead of CFLAGS.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
- Use KBUILD_CFLAGS instead of CFLAGS.
- Remove raw_prink hack, use oops_in_progress instead.
- When ETRAX_WATCHDOG_NICE_DOGGY is set, loop in trap after oops dump
instead of rebooting.
- Break long lines to less than 80 chars.
- Fix whitespace errors.
- Remove unnecessary comments.
- Add config to use mtd0 as whole flash device.
- Fix whitespace errors.
- Remove braces around single statement ifs.
- Break long lines.
- Remove unnecessary CVS log.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
Removes a lot of cruft.
- Use EXTRA_CFLAGS instead of CFLAGS.
