Commit graph

137 commits

Author SHA1 Message Date
David S. Miller
05ba712d7e Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-01-28 06:12:38 -08:00
Inaky Perez-Gonzalez
b81124696e wimax/i2400m: Add support for more i6x50 SKUs
The Intel WiMax Wireless Link 6050 can show under more than one USB
ID. Add support for all, introducing a generic flag (i2400mu->i6050)
that denotes a 6x50 based device.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2010-01-21 16:49:24 -08:00
hartleys
4754b3de93 drivers/net/wimax/i2400m/driver.c: use %pM to show MAC address
Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07 01:14:01 -08:00
hartleys
595acf270e drivers/net/wimax/i2400m/fw.c: use %pM to show MAC address
Use the %pM kernel extension to display the MAC address.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07 01:14:00 -08:00
Alan Stern
fb34d53752 USB: remove the auto_pm flag
This patch (as1302) removes the auto_pm flag from struct usb_device.
The flag's only purpose was to distinguish between autosuspends and
external suspends, but that information is now available in the
pm_message_t argument passed to suspend methods.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:21 -08:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
David S. Miller
62d83681e5 Merge branch 'linux-2.6.33.y' of git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax 2009-11-06 05:01:54 -08:00
Inaky Perez-Gonzalez
e7fec0bbf1 wimax/i2400m: fix inverted value in i2400ms_bus_setup()
Fix inverted setting of 'retries'; when we are in the probe() path, we
should retry to enable the function only once; otherwise until it
times out.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:43 -08:00
Inaky Perez-Gonzalez
20d57f8e25 wimax/i2400m: fix SDIO debugfs dentry name
The SDIO specific debugfs dentry was being misnamed "i2400m-usb"
instead of "i2400m-sdio".

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:42 -08:00
Inaky Perez-Gonzalez
5a039e7852 wimax/i2400m: fix bad assignment of return value in i2400mu_tx_bulk_out
The function was always setting the return value to the amount of
bytes transferred, overwriting the error code in error paths.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:41 -08:00
Inaky Perez-Gonzalez
faf57162e4 wimax/i2400m: handle USB stalls
When the device stalls, clear it and retry; if it keeps failing too
often, reset the device.

This specially happens when running on virtual machines; the real
hardware doesn't seem to trip on stalls too much, except for a few
reports in the mailing list (still to be confirmed this is the cause,
although it seems likely.

NOTE: it is not clear if the URB has to be resubmitted fully or start
only at the offset of the first transaction sent. Can't find
documentation to clarify one end or the other.

Tests that just resubmit the whole URB seemed to work in my
environment.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:40 -08:00
Inaky Perez-Gonzalez
fae92216da wimax/i2400m: don't retry SDIO enable in probe() paths
The iwmc3200 has a quirk where retrying SDIO enable during the probe()
path causes bad interactions with the TOP function controller that
causes a reset storm. The workaround is simply not to retry an SDIO
enable in said path (and still do in the reset / reinitialization
paths).

The driver does so by checking i2400ms->debugfs_dentry to see if it
has been initialized; if not, it is in the probe() path. Document said
fact in i2400ms->debugfs_entry.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:39 -08:00
Inaky Perez-Gonzalez
02eb41ef2a wimax/i2400m: correctly identify all iwmc3200-based SKUs
Different paths of the i2400m SDIO driver need to take care of a few
SKU-specific quirks. For the ones that are common to to all the
iwmc3200 based devices, introduce i2400ms->iwmc3200 [set in
i2400ms_probe()], so it doesn't have to check against the list of
iwmc3200 SKU IDs on each quirk site.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:38 -08:00
Inaky Perez-Gonzalez
296bd4bdd0 wimax/i2400m: Fix USB timeout specifications (to ms from HZ)
The USB code was incorrectly specifiying timeouts to be in jiffies vs
msecs. On top of that, lower it to 200ms, as 1s is really too long
(doesn't allow the watchdog to trip a reset if the device timesout too
often).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:37 -08:00
Inaky Perez-Gonzalez
5ab5a7215a wimax/i2400m: fix device getting stuck in IDLE mode
The i2400m, when conected, will negotiate with the WiMAX basestation
to put the link in IDLE mode when it is not being used. Upon RX/TX
traffic, the link has to be restablished and that might require some
crypto handshakes and maybe a DHCP renew.

This process might take up to 20 (!) seconds and in some cases we were
seeing network watchdog warnings that weren't needed.

So the network watchdog timeout is updated to be slightly above that
20s threshold. As well, the driver itself will double check if the
device is stuck in IDLE mode -- if that happens, the device will be
reset (in this case the queue is also woken up to remove bogus--once
the device is reset--warnings).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:36 -08:00
Inaky Perez-Gonzalez
c931ceeb78 wimax/i2400m: introduce i2400m_reset(), stopping TX and carrier
Currently the i2400m driver was resetting by just calling
i2400m->bus_reset(). However, this was missing stopping the TX queue
and downing the carrier. This was causing, for the corner case of the
driver reseting a device that refuses to go out of idle mode, that a
few packets would be queued and more than one reset would go through,
making the recovery a wee bit messy.

To avoid introducing the same cleanup in all the bus-specific driver,
introduced a i2400m_reset() function that takes care of house cleaning
and then calling the bus-level reset implementation.

The bulk of the changes in all files are just to rename the call from
i2400m->bus_reset() to i2400m_reset().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:36 -08:00
Inaky Perez-Gonzalez
55a662d646 wimax/i2400m: implement passive mode as a module option
Some versions of the user space Intel WiMAX daemon need to have full
control over the device initialization sequence. By setting the module
option i2400.passive_mode to 1, the driver defers all device
configuration and initialization to user space.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-11-03 12:49:34 -08:00
Tomas Winkler
ce5eb7a292 i2400m-sdio: select IWMC3200TOP in Kconfig
i2400m-sdio requires iwmc3200top for its operation

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-19 23:22:51 -07:00
Inaky Perez-Gonzalez
a8ee303cae wimax/i2400m: SDIO: fix oops on reset when TXing on uninitialized data
Currently the SDIO part of the TX resources were initialized/released
with bus_dev_{start,stop}.

The generic code's TX subsystem is destroyed afterwards, so there is a
window from the bus-TX destruction to the generic-TX destruction where
the generic-TX code might call into bus-TX to do transactions.

The SDIO code cannot really cope with this (whereas in USB, how it is
laid out, it correctly ignores it). In any case, it made no sense for
the SDIO TX code to be in i2400m->bus_dev_start/stop(), so moved to
i2400m->bus_setup/release(), which also takes care of the oops.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:25 +09:00
Inaky Perez-Gonzalez
097acbeff9 wimax/i2400m: make i2400m->bus_dev_{stop,start}() optional
In coming commits, the i2400m SDIO driver will not use
i2400m->bus_dev_stop().

Thus changed to check before calling, as an empty stub has more
overhead than a call to check if the function pointer is non-NULL.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:23 +09:00
Inaky Perez-Gonzalez
4a78fd9a73 wimax/i2400m: fix oops caused by race condition when exiting USB kthreads
Current i2400m USB code had to threads (one for processing RX, one for
TX). When calling i2400m_{tx,rx}_release(), it would crash if the
thread had exited already due to an error.

So changed the code to have the thread fill in/out
i2400mu->{tx,rx}_kthread under a spinlock; then the _release()
function will call kthread_stop() only if {rx,tx}_kthread is still
set.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:22 +09:00
Inaky Perez-Gonzalez
0c96859d7a wimax/i2400m: Let device's status reports change the device state
Currently __i2400m_dev_start was forcing, after uploading firmware and
doing a few checks to WIMAX_ST_UNINITIALIZED.

This can be overriding state changes that the device might have caused
by sending reports; thus it makes more sense to remove it and let the
device update the status on its own by sending reports.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:21 +09:00
Inaky Perez-Gonzalez
46c501473d wimax/i2400m: fix oops in TX when tearing down the device
All the entry points into the TX module should check if the device has
been torn down. Otherwise, when the device resets or shuts down, there
are windows when a call to i2400m_tx*() will oops the system.

For that, make i2400m_tx_release() set i2400m->tx_buf to NULL under
the tx_lock. Then, any entry point [i2400m_tx(), _tx_msg_sent(),
_tx_msg_get()] will check for i2400m->tx_buf to be NULL and exit
gracefully.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:20 +09:00
Inaky Perez-Gonzalez
a0beba21c3 wimax/i2400m: queue device's report until the driver is ready for them
The i2400m might start sending reports to the driver before it is done
setting up all the infrastructure needed for handling them.

Currently we were just dropping them when the driver wasn't ready and
that is bad in certain situations, as the sync between the driver's
idea of the device's state and the device's state dissapears.

This changes that by implementing a queue for handling
reports. Incoming reports are appended to it and a workstruct is woken
to process the list of queued reports.

When the device is not yet ready to handle them, the workstruct is not
woken, but at soon as the device becomes ready again, the queue is
processed.

As a consequence of this, i2400m_queue_work() is no longer used, and
thus removed.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:19 +09:00
Inaky Perez-Gonzalez
af77dfa781 wimax/i2400m: move i2400m_init() out of i2400m.h
Upcoming changes will have to add things to this function that expose
more internals, which would mean more forward declarators.

Frankly, it doesn't need to be an inline, so moved to driver.c, where
the declarations will be taken from the header file.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:19 +09:00
Inaky Perez-Gonzalez
b9ee95010b wimax/i2400m: fix deadlock: don't do BUS reset under i2400m->init_mutex
Since the addition of the pre/post reset handlers, it became clear
that we cannot do a I2400M-RT-BUS type reset while holding the
init_mutex, as in the case of USB, it will deadlock when trying to
call i2400m_pre_reset().

Thus, the following changes:

 - clarify the fact that calling bus_reset() w/ I2400M_RT_BUS while
   holding init_mutex is a no-no.

 - i2400m_dev_reset_handle() will do a BUS reset to recover a gone
   device after unlocking init_mutex.

 - in the USB reset implementation, when cold and warm reset fails,
   fallback to QUEUING a usb reset, not executing a USB reset, so it
   happens from another context and does not deadlock.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:18 +09:00
Inaky Perez-Gonzalez
5eeae35b9a wimax/i2400m: when stopping the device, cancel any pending message
The stop procedure for the device must make sure that any task that is
waiting on a message is properly cancelled.

This was being taken care of only by the __i2400m_dev_reset_handle()
path and the rest was working by chance because the waits have a
timeout.

Fixed by adding a proper cancellation in __i2400m_dev_stop().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:17 +09:00
Cindy H Kao
28cff50d99 wimax/i2400m: change the bcf_len to exclude the extended header size
The actual fw->size may not equal to the bcf size indicated in
the bcf header if the extended bcf debug header is added in the tail.

To reflect the actual fw size that will be downloaded to the device,
it is now retrived from from the size field indicated in the bcf header.

All of the headers (if there are extended headers) should indicate same
value for the size field since only one set of firmware chunks is downloaded

Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
2009-10-19 15:56:16 +09:00
Cindy H Kao
6f4fc90a36 wimax/i2400m: use JUMP cmd for last FW chunk indication
Both secure and non-secure boot must set the JUMP command in the
bootmode header as the last FW chunk, so we change to use the JUMP
command to decide if the FW chunk download is completed.

Since we tend to use one single FW to support both secure and non-secure
boot for most of the time, I2400M_BRH_SIGNED_JUMP is actually found
even for non-secure boot. But in case the FW does come with
I2400M_BRH_JUMP, we check for both of them in i2400m_dnload_bcf().

Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:15 +09:00
Inaky Perez-Gonzalez
9835fd8499 wimax/i2400m: fix race condition with tcpdump et al
tcpdump and friends were not being able to decode packets sent via
WiMAX; they had a zero ethernet type, even when the stack was properly
sending them to the device with the right type.

It happens that the driver was overwriting the (fake) ethernet header
for creating the hardware header and that was bitting the cloning used
by tcpdump (et al) to look into the packets.

Use pkskb_expand_head() [method copied from the e1000 driver] to fix.

Thanks to Herbert Xu and Andi Kleen for helping to diagnose and
pointing to the right fix.

Cc: Herbert Xu <gondor.apana.org.au>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:12 +09:00
Inaky Perez-Gonzalez
e1633fd636 wimax/i2400m: reduce verbosity of debug messages in boot mode
Missed a debug message that was being constantly printed as a
dev_err(); became annoying. Demote it to a debug message.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:11 +09:00
Inaky Perez-Gonzalez
3725d8c974 wimax/i2400m: Implement pre/post reset support in the USB driver
The USB stack can callback a driver is about to be reset by an
external entity and right after it, so the driver can save state and
then restore it.

This commit implements said support; it is implemented actually in the
core, bus-generic driver [i2400m_{pre,post}_reset()] and used by the
bus-specific drivers. This way the SDIO driver can also use it once
said support is brought to the SDIO stack.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:10 +09:00
Inaky Perez-Gonzalez
2869da8587 wimax/i2400m: do bootmode buffer management in i2400m_setup/release()
After the introduction of i2400m->bus_setup/release, there is no more
race condition where the bootmode buffers are needed before
i2400m_setup() is called.

Before, the SDIO driver would setup RX before calling i2400m_setup()
and thus need those buffers; now RX setup is done in
i2400m->bus_setup(), which is called by i2400m_setup().

Thus, all the bootmode buffer management can now be done completely
inside i2400m_setup()/i2400m_release(), removing complexity from the
bus-specific drivers.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:09 +09:00
Inaky Perez-Gonzalez
0856ccf29d wimax/i2400m: introduce i2400m->bus_setup/release
The SDIO subdriver of the i2400m requires certain steps to be done
before we do any acces to the device, even for doing firmware upload.

This lead to a few ugly hacks, which basically involve doing those
steps in probe() before calling i2400m_setup() and undoing them in
disconnect() after claling i2400m_release(); but then, much of those
steps have to be repeated when resetting the device, suspending, etc
(in upcoming pre/post reset support).

Thus, a new pair of optional, bus-specific calls
i2400m->bus_{setup/release} are introduced. These are used to setup
basic infrastructure needed to load firmware onto the device.

This commit also updates the SDIO subdriver to use said calls.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:08 +09:00
Inaky Perez-Gonzalez
c2315b4ea9 wimax/i2400m: clarify and fix i2400m->{ready,updown}
The i2400m driver uses two different bits to distinguish how much the
driver is up. i2400m->ready is used to denote that the infrastructure
to communicate with the device is up and running. i2400m->updown is
used to indicate if 'ready' and the device is up and running, ready to
take control and data traffic.

However, all this was pretty dirty and not clear, with many open spots
where race conditions were present.

This commit cleans up the situation by:

 - documenting the usage of both bits

 - setting them only in specific, well controlled places
   (i2400m_dev_start, i2400m_dev_stop)

 - ensuring the i2400m workqueue can't get in the middle of the
   setting by flushing it when i2400m->ready is set to zero. This
   allows the report hook not having to check again for the bit to be
   set [rx.c:i2400m_report_hook_work()].

 - using i2400m->updown to determine if the device is up and running
   instead of the wimax state in i2400m_dev_reset_handle().

 - not loosing missed messages sent by the hardware before
   i2400m->ready is set. In rx.c, whatever the device sends can be
   sent to user space over the message pipes as soon as the wimax
   device is registered, so don't wait for i2400m->ready to be set.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:07 +09:00
Inaky Perez-Gonzalez
8f90f3ee83 wimax/i2400m: cleanup initialization/destruction flow
Currently the i2400m driver was starting in a weird way: registering a
network device, setting the device up and then registering a WiMAX
device.

This is an historic artifact, and was causing issues, a some early
reports the device sends were getting lost by issue of the wimax_dev
not being registered.

Fix said situation by doing the wimax device registration in
i2400m_setup() after network device registration and before starting
thed device.

As well, removed spurious setting of the state to UNINITIALIZED;
i2400m.dev_start() does that already.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:06 +09:00
Inaky Perez-Gonzalez
ac53aed934 wimax/i2400m: on device stop, clean up pending wake & TX work
When the i2400m device needs to wake up an idle WiMAX connection, it
schedules a workqueue job to do it.

Currently, only when the network stack called the _stop() method this
work struct was being cancelled. This has to be done every time the
device is stopped.

So add a call in i2400m_dev_stop() to take care of such cleanup, which
is now wrapped in i2400m_net_wake_stop().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:05 +09:00
Inaky Perez-Gonzalez
cb5b756f74 wimax/i2400m: don't overwrite error codes when failing to load firmware
Make sure that i2400m_dev_bootstrap() doesn't overwrite the last known
error code with -ENOENT; when a firmware fails to load, we want to
know the cause and not a generic error code.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:04 +09:00
Inaky Perez-Gonzalez
1a5a73c0c5 wimax/i2400m: implement .reset_resume in USB subdriver
Current driver didn't implement the .reset_resume method. The i2400m
normally always reset on a comeback from system standby/hibernation.

This requires previously applied commits to cache the firmware image
file.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:03 +09:00
Inaky Perez-Gonzalez
7b43ca708a wimax/i2400m: cache firmware on system suspend
In preparation for a reset_resume implementation, have the firmware
image be cached in memory when the system goes to suspend and released
when out.

This is needed in case the device resets during suspend; the driver
can't load firmware until resume is completed or bad deadlocks
happen.

The modus operandi for this was copied from the Orinoco USB driver.

The caching is done with a kobject to avoid race conditions when
releasing it. The fw loader path is altered only to first check for a
cached image before trying to load from disk. A Power Management event
notifier is register to call i2400m_fw_cache() or i2400m_fw_uncache()
which take care of the actual cache management.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:02 +09:00
Inaky Perez-Gonzalez
3ef6129e57 wimax/i2400m: add reason argument to i2400m_dev_reset_handle()
In preparation for reset_resume support, in which the same code path
is going to be used, add a diagnostic message to dev_reset_handle()
that can be used to distinguish how the device got there.

This uses the new payload argument added to i2400m_schedule_work() by
the previous commit.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:01 +09:00
Inaky Perez-Gonzalez
b0fbcb2a0b wimax/i2400m: clean up & add a payload argument to i2400m_schedule_work()
Forthcoming commits use having a payload argument added to
i2400m_schedule_work(), which then becomes nearly identical to
i2400m_queue_work().

This patch thus cleans up both's implementation, making it share
common helpers and adding the payload argument to
i2400m_schedule_work().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:56:00 +09:00
Dirk Brandewie
7329012e67 wimax/i6x50: add Intel WiFi/WiMAX Link 6050 Series support
Add support for the WiMAX device in the Intel WiFi/WiMAX Link 6050
Series; this involves:

 - adding the device ID to bind to and an endpoint mapping for the
   driver to use.

 - at probe() time, some things are set depending on the device id:

   + the list of firmware names to try

   + mapping of endpoints

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:55:59 +09:00
Cindy H Kao
f8fc329557 wimax/iwmc3200: add new sdio device ID to support iwmc3200 2.5GHz sku
Different sdio device IDs are designated to support different intel
wimax silicon sku. The new macro SDIO_DEVICE_ID_IWMC3200_WIMAX_2G5(0x1407)
is added to support iwmc3200 2.5GHz sku.  The existing
SDIO_DEVICE_ID_IWMC3200_WIMAX(0x1402) is for iwmc3200 general sku.

Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:55:59 +09:00
Inaky Perez-Gonzalez
10607c86e1 wimax/i2400m: on firmware upload, select BCF header that matches device's request
Devices based on the i2400m emit a "barker" (32 bit unsigned) when
they boot. This barker is used to select, in the firmware file image,
which header should be used to process the rest of the file.

This commit implements said support, completing the series started by
previous commits.

We modify the i2400m_fw_dnload() firmware loading path by adding a
call to i2400m_bcf_hdr_find() [new function], in which the right BCF
header [as listed in i2400m->fw_hdrs by i2400m_fw_check()] is
located. Then this header is fed to i2400m_dnload_init() and
i2400m_dnload_finalize().

The changes to i2400m_dnload_finalize() are smaller than they look;
they add the bcf_hdr argument and use that instead of bcf. Likewise in
i2400m_dnload_init().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:55:58 +09:00
Inaky Perez-Gonzalez
bfc44187bb wimax/i2400m: support extended firmware format
The SBCF firmware format has been extended to support extra headers
after the main payload. These extra headers are used to sign the
firmware code with more than one certificate. This eases up
distributing single code images that work in more than one SKU of the
device.

The changes to support this feature will be spread in a series of
commits. This one just adds the support to parse the extra headers and
store them in i2400m->fw_hdrs. Coming changes to the loader code will
use that to determine which header to upload to the device.

The i2400m_fw_check() function now iterates over all the headers and
for each, calls i2400m_fw_hdr_check(), which does some basic checks on
each header. It then stores the headers for the bootloader code to use.

The i2400m_dev_bootstrap() function has been modified to cleanup
i2400m->fw_hdrs when done.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:55:57 +09:00
Inaky Perez-Gonzalez
fabce1a485 wimax/i2400m: verify firmware format version is known
Make sure the bootloading code checks that the format of the file is
understood (major version match). This also fixes a dumb typo in
extracting the major version field.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:55:56 +09:00
Inaky Perez-Gonzalez
923d708fed wimax/i2400m: fix reboot echo/ack barker deadlock
The i2400m based devices can get in a sort of a deadlock some times;
when they boot, they send a reboot "barker" (a magic number) and then
the driver has to echo that same barker to ack reception
(echo/ack). Then the device does a final ack by sending an ACK barker.

The first time this happens, we don't know ahead of time with barker
the device is going to send, as different device models and SKUs will
send different barker depending on the EEPROM programming.

If the device has sent the barker before the driver has been able to
read it, the driver looses, as it doesn't know which barker it has to
echo/ack back. With older devices, we tried a couple of combinations
and that always worked; but now, with adding support for more, in
which we have an unlimited number of new barkers, that is not an
option.

So we rework said case so that when the device gets stuck, we just
cycle through all the known types until one forces the device to send
an ack. Otherwise, the driver gives up and aborts.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:55:55 +09:00
Inaky Perez-Gonzalez
ebc5f62b76 wimax/i2400m: retry loading firmware files in sequence
The i2400m firmware loader is given a list of firmware files to try to
load by the probe() function (which can be different based on the
device's model / generation).

Current code didn't attempt to load, check and try to boot with each
file, but just to try to load if off disk. This is limiting in some
cases, where we might want to try to load a firmware and if it fails
to load onto the device, just fall back to another one.

This changes the behaviour so all files are tried for being loaded
from disk, checked and uploaded to the device until one suceeds in
bringing the device up.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-10-19 15:55:54 +09:00