Commit graph

28 commits

Author SHA1 Message Date
Yaniv Rosner
4f60dab113 bnx2x: Add support for BCM84823
Add support for new phy type BCM84823 (Dual copper-port phy)

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05 20:00:41 -08:00
Eilon Greenstein
b015e3d112 bnx2x: Allowing 0 as initial fairness value
Value of zero was used to disable the fairness mechanism. Though the code
(driver and FW) allowed changing the value at run time, it did not allow to do
that if the mechanism was disabled to begin with.
Fixed the FW to allow turning on and off the mechanism at run time. Fixed the
code to read the value from the chip at the right sequence.
Without this fix, if the initial value was set to zero, traffic could not run on
the interface.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:17:20 -07:00
Michael Chan
e251306556 cnic: Add bnx2x data structures.
Add hardware and software structures for bnx2x devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11 23:30:16 -07:00
Eilon Greenstein
2691d51d72 bnx2x: Supporting Device Control Channel
In multi-function mode, the FW can receive special management control commands
to set the Min/Max BW and the the function link state

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 23:02:12 -07:00
Eilon Greenstein
ca00392cb8 bnx2x: Using the new FW
The new FW improves the packets per second rate. It required a lot of change in
the FW which implies many changes in the driver to support it. It is now also
possible for the driver to use a separate MSI-X vector for Rx and Tx - this also
add some to the complicity of this change.

All things said - after this patch, practically all performance matrixes show
improvement.
Though Vladislav Zolotarov is not signed on this patch, he did most of the job
and deserves credit for that.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 22:53:28 -07:00
Eilon Greenstein
4d295db0ef bnx2x: Supporting BCM8727 PHY
Adding support for BCM8727 - a dual port SFP+ PHY. That includes verification of
the optic module vendor and part number - the list of approved modules resides
on the nvram and the module is verified by the FW. Since not all users would
like to use this verification feature, it can be disabled. The default behavior
is to issue a warning if the module is not approved, but still allow using it -
but it is also possible to disable the link if the module is not approved.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21 11:18:30 -07:00
Eilon Greenstein
fd4ef40d59 bnx2x: Fan failure
Setup fan failure for different PHY types or according to nvram settings

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21 11:18:26 -07:00
Eilon Greenstein
2b1440230a bnx2x: Version
And updating the year

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:32:01 -08:00
Eilon Greenstein
356e23850b bnx2x: Clean-up
Whitespaces, empty lines, 80 columns, indentations and removing redundant
parenthesis

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:58 -08:00
Eilon Greenstein
f537225142 bnx2x: Comments and prints
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:57 -08:00
Eilon Greenstein
0febaa42a3 bnx2x: Removing unused struct
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:54 -08:00
Eilon Greenstein
4781bfad73 bnx2x: Sparse endianity annotation
Resolving the majority of the issues, but there are still some left for future
patches.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:53 -08:00
Eilon Greenstein
5cd65a93e9 bnx2x: Better struct naming
This is the device info from the chip shared memory - rename to avoid confusion

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:50 -08:00
Eilon Greenstein
c2c8b03e20 bnx2x: Pre emphasis configuration
Supporting non-default pre-emphasis settings for the internal and some external
PHYs

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:41 -08:00
Eilon Greenstein
a35da8dbf1 bnx2x: Saving PHY FW version
Some PHYs (like the BCM8726) FW version cannot be read after activating the
PHY, so we need to save this information

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:31 -08:00
Eilon Greenstein
589abe3a0f bnx2x: Supporting BCM8726 PHY
Also adding the ability to recognize the optic module and disable it if it is
not authorized for safety reasons - since this feature might upset some users
which are willing to take the risk, it is optional and can be disabled by
setting an nvram bit (or a trivial driver patch to set this bit).
This dual port PHY requires special handling if the ports are swapped.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:24 -08:00
Eilon Greenstein
35b19ba51c bnx2x: Removing the board type
There are too many different board types and this field is not scalable.
Removing it and making decisions according to other fields

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:15 -08:00
Eilon Greenstein
1c06328c03 bnx2x: Flow control enhancement
Setting better HW thresholds and enabling FW capabilities for better
enforcement. Also set the HW to more efficiently use the internal buffers if
this is a single port design

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:15 -08:00
Eilon Greenstein
8a1c38d17d bnx2x: BW shaper enhancements
Some of the configuration can be set when loading the device and shouldn't be
re-calculated after each link up indication since it is not dependent on the
link speed

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:14 -08:00
Eilon Greenstein
de832a55d2 bnx2x: Per queue statistics
Re-ordering the statistics to enhance readability and adding per queue
statistics (available via ethtool -S)

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:12 -08:00
Eilon Greenstein
8badd27aa0 bnx2x: MSI support
Enabling MSI on top of MSI-X and INTA. Also changing the module parameter to
allow choosing INTA or MSI even when MSI-X is available. The default status
block should not be reversed for endianity. Since MSI can issue
re-configuration, the interrupt disable function now requires mmiowb

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:05 -08:00
Eilon Greenstein
8d9c5f34a2 bnx2x: New FW
This is the FW blob and the relevant definitions without any logic. It
also contains the minimal mandatory code changes to work with this FW
but it does not contain enabling of the new features that this FW
provides.

This FW is needed for:
- More efficient multi-queue
- per queue statistics
- Big-endian issue with MSI
- Improved pause response

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:24:08 -08:00
Eilon Greenstein
3347162995 bnx2x: Spelling mistakes
Spelling mistakes
Spelling has to L's in it...

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13 16:05:37 -07:00
Yitchak Gertner
bb2a0f7ae4 bnx2x: New statistics code
To avoid race conditions with link up/down and driver up/down - the
statistics handling was re-written in a form of state machine.
Also supporting statistics for 57711

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-23 20:33:36 -07:00
Eilon Greenstein
34f80b04f3 bnx2x: Add support for BCM57711 HW
Supporting the 57711 and 57711E - refers to in the code as E1H. The
57710 is referred to as E1.

To support the new members in the family, the bnx2x structure was
divided to 3 parts: common, port and function. These changes caused some
rearrangement in the bnx2x.h file.

A set of accessories macros were added to make access to the bnx2x
structure more readable

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-23 20:33:01 -07:00
Eilon Greenstein
ad8d394804 bnx2x: New init infrastructure
This new initialization code supports the 57711 HW. It also supports
the emulation and FPGA for the 57711 and 57710 initializations values
(very small amount of code which is very helpful in the lab - less
than 30 lines).

The initialization is done via DMAE after the DMAE block is ready -
before it is ready, some of the initialization is done via PCI
configuration transactions (referred to as indirect write).  A mutex
to protect the DMAE from being overlapped was added.  There are few
new registers which needs to be initialized by SW - the full comment
for those registers is added to the register file.  A place holder for
the 57711 (referred to as E1H) microcode was added- the microcode
itself is too big and it is split over the following 4 patches

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-23 20:29:02 -07:00
Eliezer Tamir
f14106478e [BNX2X]: Correct Link management
Properly protect PHY access between two devices on the same board with
a HW lock.

Use GPIO to clear all previous configurations before changing link
parameters.

Shut down the external PHY in case of fan failure.

Reducing the MDC/MDIO clock to 2.5MHz due to problems with some
devices.

Resolve the flow control response according to autoneg with external
PHY.

Unmasking all PHY interrupts in single write to prevent a race in the
interrupts order.

LASI indication fixes to work with peculiarities of PHYs.

Disable MAC RX to avoid a HW bug when closing the MAC under traffic.

Disable parallel detection on HiGig due to HW limitation.

Updating the shared memory structure to work with the current
bootcode.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28 11:51:50 -08:00
Eliezer Tamir
a2fbb9ea23 add bnx2x driver for BCM57710
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:03:53 -08:00