Commit graph

6 commits

Author SHA1 Message Date
Eric Miao
198fc108ee [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
PXA27x and later processors support overlay1 and overlay2 on-top of the
base framebuffer (although under-neath the base is also possible). They
support palette and no-palette RGB formats, as well as YUV formats (only
available on overlay2). These overlays have dedicated DMA channels and
behave in a similar way as a framebuffer.

This heavily simplified and re-structured work is based on the original
pxafb_overlay.c (which is pending for mainline merge for a long time).

The major problems with this pxafb_overlay.c are (if you are interested
in the history):

  1. heavily redundant (the control logics for overlay1 and overlay2 are
     actually identical except for some small operations,  which are now
     abstracted into a 'pxafb_layer_ops' structure)

  2. a lot of useless and un-tested code (two workarounds which are now
     fixed on mature silicons)

  3. cursorfb is actually useless, hardware cursor should not be used
     this way, and the code was actually un-tested for a long time.

The code in this patch should be self-explanatory, I tried to add minimum
comments. As said, this is basically simplified, there are several things
still on the pending list:

  1. palette mode is un-supported and un-tested (although re-using the
     palette code of the base framebuffer is actually very easy now with
     previous clean-up patches)

  2. fb_pan_display for overlay(s) is un-supported

  3. the base framebuffer can actually be abstracted by 'pxafb_layer' as
     well, which will help further re-use of the code and keep a better
     and consistent structure. (This is the reason I named it 'pxafb_layer'
     instead of 'pxafb_overlay' or something alike)

See Documentation/fb/pxafb.txt for additional usage information.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 18:00:04 +08:00
Eric Miao
878f578319 [ARM] pxafb: cleanup of the color format manipulation code
1. introduce var_to_depth() to calculate the color depth including the
   transparency bit

2. the conversion from 'fb_var_screeninfo' to LCCR3 BPP bits can be re-
   used by overlays (in OVLxC1), thus an individual pxafb_var_to_bpp()
   has been separated out.

3. pxafb_setmode() should really set the color bitfields correctly at
   begining, introduce a pxafb_set_pixfmt() for this

4. allow user apps to specify color formats within fb_var_screeninfo,
   and checking of this in pxafb_check_var() has been simplified as
   below:

   a) pxafb_var_to_bpp() should pass - which means a basically correct
      bits_per_pixel and color depth setting
   b) the RGBT bitfields are then forced into supported values by
      pxafb_set_pixfmt()

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao
a0427509a7 [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
Add the palette format support for LCCR4_PAL_FOR_3, and fix the
issue of LCCR4 being never assigned.

Also remove the useless pxafb_set_truecolor().

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao
6e354846e8 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
dma branching is enabled by extending the current setup_frame_dma()
function to allow a 2nd set of frame/palette dma descriptors to be
used.

As a result, pxafb_dma_buff.dma_desc[], pxafb_dma_buff.pal_desc[]
and pxafb_info.fdadr[] are doubled.

This allows maximum re-use of the current dma setup code, although
the pxafb_info.fdadr[xx] for FBRx register values looks a bit odd.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao
69bdea7047 [ARM] pxafb: allow insertion of delay to the smart panel command sequence
Some smart panel requires a delay between command sequences, while PXA
LCD controller didn't provide such one, let's emulate this by software.

A software delay marker can be inserted into the command sequence, once
pxafb_smart_queue() detects this, it flushes the previous commands and
delay for a specified number of milliseconds.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17 22:50:52 +08:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Renamed from include/asm-arm/arch-pxa/regs-lcd.h (Browse further)