Commit graph

3842 commits

Author SHA1 Message Date
Matthew Wilcox
1abfd37013 [SCSI] Rename scsi_print_msg to spi_print_msg
Rename scsi_print_msg to spi_print_msg and move its prototype from
scsi_dbg.h to scsi_transport_spi.h

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 18:41:27 -08:00
James Bottomley
7b16318dea Fix up SCSI mismerge
I forgot to do a git-update-cache on the merged files ...
2005-12-15 20:17:02 -06:00
James Bottomley
2a1e1379ba Merge by hand (conflicts in scsi_lib.c)
This merge is pretty extensive.  The conflict is over the new
req->retries parameter, so I had to change the prototype to
scsi_setup_blk_pc_cmnd() and the usage in sd, sr and st.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 17:35:24 -06:00
Mike Christie
defd94b754 [SCSI] seperate max_sectors from max_hw_sectors
- export __blk_put_request and blk_execute_rq_nowait
needed for async REQ_BLOCK_PC requests
- seperate max_hw_sectors and max_sectors for block/scsi_ioctl.c and
SG_IO bio.c helpers per Jens's last comments. Since block/scsi_ioctl.c SG_IO was
already testing against max_sectors and SCSI-ml was setting max_sectors and
max_hw_sectors to the same value this does not change any scsi SG_IO behavior. It only
prepares ll_rw_blk.c, scsi_ioctl.c and bio.c for when SCSI-ml begins to set
a valid max_hw_sectors for all LLDs. Today if a LLD does not set it
SCSI-ml sets it to a safe default and some LLDs set it to a artificial low
value to overcome memory and feedback issues.

Note: Since we now cap max_sectors to BLK_DEF_MAX_SECTORS, which is 1024,
drivers that used to call blk_queue_max_sectors with a large value of
max_sectors will now see the fs requests capped to BLK_DEF_MAX_SECTORS.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 15:11:40 -08:00
Al Viro
a32972965e [PATCH] sun4c_memerr_reg __iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15 10:01:29 -08:00
Al Viro
f8ad23a401 [PATCH] fix iomem annotations in sparc32 pcic code
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15 10:01:28 -08:00
Mike Christie
17e01f216b [SCSI] add retries field to request for REQ_BLOCK_PC use
For tape we need to control the retries. This patch adds a retries
counter on the request for REQ_BLOCK_PC commands originating from
scsi_execute* to use. REQ_BLOCK_PC commands comming from the block
layer SG_IO path continue to use the retires set in the ULD init_command.
(scsi_execute* does not set the gendisk so we do not execute
the init_command in that path).

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14 19:04:11 -08:00
Mike Christie
6e68af666f [SCSI] Convert SCSI mid-layer to scsi_execute_async
Add scsi helpers to create really-large-requests and convert
scsi-ml to scsi_execute_async().

Per Jens's previous comments, I placed this function in scsi_lib.c.
I made it follow all the queue's limits - I think I did at least :), so
I removed the warning on the function header.

I think the scsi_execute_* functions should eventually take a request_queue
and be placed some place where the dm-multipath hw_handler can use them
if that failover code is going to stay in the kernel. That conversion
patch will be sent in another mail though.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14 19:03:35 -08:00
Mike Christie
6e39b69e7e [SCSI] export blk layer functions needed for blk_execute_rq_nowait
To send async requests we need these two functions exported.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14 19:00:50 -08:00
Linus Torvalds
7116317dc9 Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6 2005-12-14 18:58:46 -08:00
Linus Torvalds
a50e2cc7c8 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2005-12-14 18:40:02 -08:00
Bartlomiej Zolnierkiewicz
7b4df9ece9 [PATCH] ide: cleanup ide_driver_t
Remove unused fields: ioctl, ata[pi]_prebuilder.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15 02:20:15 +01:00
Bartlomiej Zolnierkiewicz
517bd1d5ea [PATCH] ide: cleanup ide.h
Remove:
* stale comment
* unused HOST() macro
* unused ata_{error,control}_t types
* unused atapi_select_t type
* ide_init_subdrivers() prototype

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15 02:19:57 +01:00
Jordan Crouse
8f29e650bf [PATCH] ide: AU1200 IDE update
Changes here include removing all of CONFIG_PM while it is being repeatedly
smacked with a lead pipe, moving the BURSTMODE param to a #define (it should
be defined almost always anyway), fixing the rqsize stuff, pulling ide_ioreg_t,
and general cleanups and whatnot.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15 02:17:46 +01:00
Jordan Crouse
65e5f2e3b4 [PATCH] ide: core modifications for AU1200
bart: slightly modified by me

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15 02:16:18 +01:00
Daniel Drake
ceef833bae [PATCH] via82cxxx IDE: Add VT8251 ISA bridge
Some motherboards (such as the Asus P5V800-MX) ship a
PCI_DEVICE_ID_VIA_82C586_1 IDE controller alongside a VT8251 southbridge.

This southbridge is currently unrecognised in the via82cxxx IDE driver,
preventing those users from getting DMA access to disks.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15 02:11:55 +01:00
Linus Torvalds
c7868048a7 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-12-14 15:48:06 -08:00
Daniel Jacobowitz
c2e2611425 [ARM] 3205/1: Handle new EABI relocations when loading kernel modules.
Patch from Daniel Jacobowitz

Handle new EABI relocations when loading kernel modules.  This is
necessary for CONFIG_AEABI kernels, and also for some broken
(since fixed) old ABI toolchains.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-14 22:04:22 +00:00
James Bottomley
c9526497cf [SCSI] Consolidate REQ_BLOCK_PC handling path (fix ipod panic)
This follows on from Jens' patch and consolidates all of the ULD
separate handlers for REQ_BLOCK_PC into a single call which has his
fix for our direction bug.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 21:29:27 -08:00
Matthew Wilcox
829b84675e [SCSI] Make scsi_transport_spi.h includable by itself
Add forward declarations to allow scsi_transport_spi.h to be compiled by
itself.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:54:40 -07:00
Moore, Eric Dean
4e06cbd42c [SCSI] pci_ids.h: add subclass code for SAS Controllers
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:44:15 -07:00
James Bottomley
7f23e146a1 [SCSI] correct some dropped const compiler warnings
Make the vendor, model and rev fields in scsi_device pointers to const
and update a few prototypes of functions using them.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:12:05 -07:00
Tony Luck
eed66cfcbb [IA64] Split 16-bit severity field in sal_log_record_header
ERR_SEVERITY item is defined as a 8 bits item in SAL documentation
($B.2.1 rev december 2003), but as an u16 in sal.h.
This has the side effect that current code in mca.c may not call
ia64_sal_clear_state_info() upon receiving corrected platform errors
if there are bits set in the validation byte.  Reported by Xavier Bru.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-13 10:41:49 -08:00
Jeff Garzik
50630195bb [libata] mark certain hardware (or drivers) with a no-atapi flag
Some hardware does not support the PACKET command at all.
Other hardware supports ATAPI, but the driver does something nasty such
as calling BUG() when an ATAPI command is issued.

For these such cases, we mark them with a new flag, ATA_FLAG_NO_ATAPI.

Initial version contributed by Ben Collins.
2005-12-13 02:29:45 -05:00
Antonino A. Daplas
be0d9b6c7a [PATCH] fbdev: Fix incorrect unaligned access in little-endian machines
The drawing function cfbfillrect does not work correctly when access is not
unsigned-long aligned.  It manifests as extra lines of pixels that are not
complete drawn.  Reversing the shift operator solves the problem, so I would
presume that this bug would manifest only on little endian machines.  The
function cfbcopyarea may also have this bug.

Aligned access should present no problems.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 22:31:17 -08:00
Knut Petersen
39942fd8ff [PATCH] fbdev: fix switch to KD_TEXT, enhanced version
Every framebuffer driver relies on the assumption that the set_par()
function of the driver is called before drawing functions and other
functions dependent on the hardware state are executed.

Whenever you switch from X to a framebuffer console for the very first
time, there is a chance that a broken X system has _not_ set the mode to
KD_GRAPHICS, thus the vt and framebuffer code executes a screen redraw and
several other functions before a set_par() is executed.  This is believed
to be not a bug of linux but a bug of X/xdm.  At least some X releases used
by SuSE and Debian show this behaviour.

There was a 2nd case, but that has been fixed by Antonino Daplas on
10-dec-2005.

This patch allows drivers to set a flag to inform fbcon_switch() that they
prefer a set_par() call on every console switch, working around the
problems caused by the broken X releases.

The flag will be used by the next release of cyblafb and might help other
drivers that assume a hardware state different to the one used by X.

As the default behaviour does not change, this patch should be acceptable
to everybody.

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 22:31:17 -08:00
Antonino A. Daplas
4743484718 [PATCH] fbcon: Add ability to save/restore graphics state
Add hooks to save and restore the graphics state.  These hooks are called in
fbcon_blank() when entering/leaving KD_GRAPHICS mode.  This is needed by
savagefb at least so it can cooperate with savage_dri and by cyblafb.

State save/restoration can be full or partial.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 22:31:17 -08:00
Linus Torvalds
0e67050666 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 2005-12-12 16:48:29 -08:00
Linus Torvalds
062dfa433c Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-12-12 15:25:58 -08:00
Dave Jones
68799398ce [PATCH] broken cast in parport_pc
Spotted by a Fedora user.  Compiling with DEBUG_PARPORT set fails due to
the broken cast.

Just remove it.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:45 -08:00
Keshavamurthy Anil S
bf8d5c52c3 [PATCH] kprobes: increment kprobe missed count for multiprobes
When multiple probes are registered at the same address and if due to some
recursion (probe getting triggered within a probe handler), we skip calling
pre_handlers and just increment nmissed field.

The below patch make sure it walks the list for multiple probes case.
Without the below patch we get incorrect results of nmissed count for
multiple probe case.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:45 -08:00
Keshavamurthy Anil S
00d7c05ab1 [PATCH] kprobes: no probes on critical path
For Kprobes critical path is the path from debug break exception handler
till the control reaches kprobes exception code.  No probes can be
supported in this path as we will end up in recursion.

This patch prevents this by moving the below function to safe __kprobes
section onto which no probes can be inserted.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:45 -08:00
Mauro Carvalho Chehab
dd81540810 [PATCH] V4L/DVB: (3151) I2C ID renamed to I2C_DRIVERID_INFRARED
I2C ID renamed to I2C_DRIVERID_INFRARED

Acked-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:45 -08:00
Mauro Carvalho Chehab
674434c691 [PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 4
Clean up whitespaces at v4l/dvb files

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:44 -08:00
Mauro Carvalho Chehab
afd1a0c9ac [PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 3
Clean up whitespaces at v4l/dvb files

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:44 -08:00
John McCutchan
8140a5005b [PATCH] inotify: add two inotify_add_watch flags
The below patch lets userspace have more control over the inodes that
inotify will watch.  It introduces two new flags.

        IN_ONLYDIR -- only watch the inode if it is a directory.
        This is needed to avoid the race that can occur when we want to be
        sure that we are watching a directory.

        IN_DONT_FOLLOW -- don't follow a symlink.  In combination
        with IN_ONLYDIR we can make sure that we don't watch the target of
        symlinks.

The issues the flags fix came up when writing the gnome-vfs inotify
backend.  Default behaviour is unchanged.

Signed-off-by: John McCutchan <ttb@tentacle.dhs.org>
Acked-by: Robert Love <rml@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:43 -08:00
Ingo Molnar
b88cb42428 [PATCH] add hlist_replace_rcu()
Add list_replace_rcu: replace old entry by new one.

Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:43 -08:00
Matt Helsley
5650b736ad [PATCH] Add timestamp field to process events
This adds a timestamp field to the events sent via the process event
connector.  The timestamp allows listeners to accurately account the
duration(s) between a process' events and offers strong means with which
to determine the order of events with respect to a given task while also
avoiding the addition of per-task data.

This alters the size and layout of the event structure and hence would
break compatibility if process events connector as it stands in 2.6.15-rc2
were released as a mainline kernel.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:42 -08:00
Matt Helsley
64123fd42c [PATCH] Add getnstimestamp function
There are several functions that might seem appropriate for a timestamp:

get_cycles()
current_kernel_time()
do_gettimeofday()
<read jiffies/jiffies_64>

Each has problems with combinations of SMP-safety, low resolution, and
monotonicity. This patch adds a new function that returns a monotonic SMP-safe
timestamp with nanosecond resolution where available.

Changes:
	Split timestamp into separate patch
	Moved to kernel/time.c
	Renamed to getnstimestamp
	Fixed unintended-pointer-arithmetic bug

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:42 -08:00
Dipankar Sarma
ab4720ec76 [PATCH] add rcu_barrier() synchronization point
This introduces a new interface - rcu_barrier() which waits until all
the RCUs queued until this call have been completed.

Reiser4 needs this, because we do more than just freeing memory object
in our RCU callback: we also remove it from the list hanging off
super-block.  This means, that before freeing reiser4-specific portion
of super-block (during umount) we have to wait until all pending RCU
callbacks are executed.

The only change of reiser4 made to the original patch, is exporting of
rcu_barrier().

Cc: Hans Reiser <reiser@namesys.com>
Cc: Vladimir V. Saveliev <vs@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:42 -08:00
Keith Owens
bf7ececa9b [IA64] Define an ia64 version of __raw_read_trylock
IA64 is using the generic version of __raw_read_trylock, which always
waits for the lock to be free instead of returning when the lock is in
use.  Define an ia64 version of __raw_read_trylock which behaves
correctly, and drop the generic one.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-12 08:54:18 -08:00
Linus Torvalds
913f2d792f Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-12-11 20:23:58 -08:00
Linus Torvalds
fe3f2053fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge 2005-12-11 20:23:25 -08:00
Linus Torvalds
7fc7e2eeec Remove (at least temporarily) the "incomplete PFN mapping" support
With the previous commit, we can handle arbitrary shared re-mappings
even without this complexity, and since the only known private mappings
are for strange users of /dev/mem (which never create an incomplete one),
there seems to be no reason to support it.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-11 19:57:52 -08:00
David Gibson
cbf52afdc0 [PATCH] powerpc: Add missing icache flushes for hugepages
On most powerpc CPUs, the dcache and icache are not coherent so
between writing and executing a page, the caches must be flushed.
Userspace programs assume pages given to them by the kernel are icache
clean, so we must do this flush between the kernel clearing a page and
it being mapped into userspace for execute.  We were not doing this
for hugepages, this patch corrects the situation.

We use the same lazy mechanism as we use for normal pages, delaying
the flush until userspace actually attempts to execute from the page
in question.

Tested on G5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-09 16:30:48 +11:00
Deepak Saxena
5b35193f58 [ARM] 3199/1: Remove bogus function prototype from arch-pxa/irq.h
Patch from Deepak Saxena

This looks like a leftover from 2.4 days...

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-08 23:34:44 +00:00
Christoph Lameter
f64fa6772a [IA64] Fix missing parameter for local_add/sub
Local add/sub macros need to have a parameter to specify
the addend/subtrahend respectively.

Signed-off-by: Christoph Lameter <clameter@sgi.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-07 11:30:11 -08:00
Robin Holt
bd1d6e2451 [IA64] Change SET_PERSONALITY to comply with comment in binfmt_elf.c.
We have a customer application which trips a bug.  The problem arises
when a driver attempts to call do_munmap on an area which is mapped, but
because current->thread.task_size has been set to 0xC0000000, the call
to do_munmap fails thinking it is an unmap beyond the user's address
space.

The comment in fs/binfmt_elf.c in load_elf_library() before the call
to SET_PERSONALITY() indicates that task_size must not be changed for
the running application until flush_thread, but is for ia64 executing
ia32 binaries.

This patch moves the setting of task_size from SET_PERSONALITY() to
flush_thread() as indicated.  The customer application no longer is able
to trip the bug.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-06 09:12:34 -08:00
John Keller
3ec829b689 [IA64-SGI] altix: pci_window fixup
Altix only patch to add fixup code that sets up
pci_controller->window. This code is a temporary
fix until ACPI support on Altix is added.

Also, corrects the usage of pci_dev->sysdata,
which had previously been used to reference
platform specific device info, to now point to
a pci_controller struct.

Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-06 09:09:23 -08:00
Steven Whitehouse
1f12bcc9d1 [DECNET]: add memory buffer settings
The patch (originally from Steve) simply adds memory buffer settings to 
DECnet similar to those in TCP.

Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-05 13:42:06 -08:00