Commit graph

163 commits

Author SHA1 Message Date
Tejun Heo
22aac0896b [PATCH] libata: clear sdev->locked on door lock failure
SCSI EH locks door if sdev->locked is set.  Sometimes door lock
command fails continuously (e.g. when medium is not present) and as
libata uses EH to acquire sense data, this easily creates a loop where
a failed lock door invokes EH and EH issues lock door on completion.

This patch clears sdev->locked on door lock failure to break this
loop.  This problem has been spotted and diagnosed by Unicorn Chang
<uchang@tw.ibm.com>.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-09 01:16:27 -04:00
Tejun Heo
d6f26d1f1f [PATCH] libata: reimplement per-dev PM
Reimplement per-dev PM.  The original implementation directly put the
device into suspended mode and didn't synchronize w/ EH operations
including hotplug.  This patch reimplements ata_scsi_device_suspend()
and ata_scsi_device_resume() such that they request EH to perform the
respective operations.  Both functions synchronize with hotplug such
that it doesn't operate on detached devices.

Suspend waits for completion but resume just issues request and
returns.  This allows parallel wake up of devices and thus speeds up
system resume.

Due to sdev detach synchronization, it's not feasible to separate out
EH requesting from sdev handling; thus, ata_device_suspend/resume()
are removed and everything is implemented in the respective
libata-scsi functions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:28 -04:00
Tejun Heo
2832430435 [PATCH] libata: implement ATA_EHI_RESUME_LINK
Implement ATA_EHI_RESUME_LINK, which indicates that the link needs to
be resumed.  This used to be implied by ATA_EHI_HOTPLUGGED.  However,
hotplug isn't the only event which requires link resume and separating
this out allows other places to request link resume.  This
differentiation also allows better debounce timing selection.

This patch converts user scan to use ATA_EHI_RESUME_LINK.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 22:16:27 -04:00
Tejun Heo
b51e9e5db0 [PATCH] libata: add ap->pflags and move core dynamic flags to it
ap->flags is way too clamped.  Separate out core dynamic flags to
ap->pflags.  ATA_FLAG_DISABLED is a dynamic flag but left alone as
it's referenced by a lot of LLDs and it's gonna be removed once all
LLDs are converted to new EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 21:51:42 -04:00
Jesper Juhl
8f76078037 [PATCH] Remove redundant NULL checks before [kv]free - in drivers/
Remove redundant NULL chck before kfree + tiny CodingStyle cleanup for
drivers/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:48 -07:00
Brian King
99ba9e093d [PATCH] libata: Add ata_scsi_dev_disabled
Separate out parts of ata_scsi_find_dev to be reused in
future SAS/SATA patches.

Acked-by: Jeff Garzik <jgarzik@pobox.com>

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 23:46:45 -04:00
Jeff Garzik
ba6a13083c [libata] Add host lock to struct ata_port
Prepare for changes required to support SATA devices
attached to SAS HBAs. For these devices we don't want to
use host_set at all, since libata will not be the owner
of struct scsi_host.

Signed-off-by: Brian King <brking@us.ibm.com>

(with slight merge modifications made by...)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 23:46:10 -04:00
Jeff Garzik
71d530cd1b Merge branch 'master' into upstream
Conflicts:

	drivers/scsi/libata-core.c
	drivers/scsi/libata-scsi.c
	include/linux/pci_ids.h
2006-06-22 22:11:56 -04:00
Tejun Heo
d01712698c [PATCH] libata: fix oops caused rescanning NULL sdev
Depending on timing, ata_scsi_dev_rescan() might encounter a device
which is enabled but not yet attached to sdev.  On such cases, the
original code caused oops.  This patch makes ata_scsi_dev_rescan()
rescan only device which are attached to sdevs.

While at it, properly indent leading comment and add description about
how it's synchronized with sdev attach/detach.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12 10:23:21 -04:00
zhao, forrest
3057ac3c1a [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5)
This patch makes libata snoop 'SET FEATURES - WRITE CACHE
ENABLE/DISABLE' command, executing requisite revalidation processes
to update cached data.

Signed-off-by: Forrest Zhao <forrest.zhao@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12 00:18:35 -04:00
Christoph Hellwig
beb4048750 [SCSI] remove scsi_request infrastructure
With Achim patch the last user (gdth) is switched away from scsi_request
so we an kill it now.  Also disables some code in i2o_scsi that was
broken since the sg driver stopped using scsi_requests.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:24:40 -05:00
Christoph Hellwig
5d5ff44fe6 [SCSI] fix up request buffer reference in various scsi drivers
Various scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their
queuecommand functions.  Those fields are internal storage for the
midlayer only and are used to restore the original payload after
request_buffer and request_bufflen have been overwritten for EH.  Using
the buffer and bufflen fields means they do very broken things in error
handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-06 11:07:25 -04:00
Tejun Heo
ccf68c3405 [PATCH] libata-hp: hook warmplug
Hook transportt->user_scan() and hostt->slave_destroy().

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:28:09 +09:00
Tejun Heo
83c47bcb3c [PATCH] libata-hp: implement warmplug
Implement warmplug.  User-initiated unplug can be detected by
hostt->slave_destroy() and plug by transportt->user_scan().  This
patch only implements the two callbacks.  The next function will hook
them.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:28:07 +09:00
Tejun Heo
580b210232 [PATCH] libata-hp: implement SCSI part of hotplug
Implement SCSI part of hotplug.

This must be done in a separate context as SCSI makes use of EH during
probing.  SCSI scan fails silently if EH is in progress.  In such
cases, libata pauses briefly and retries until every device is
attached.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:28:05 +09:00
Tejun Heo
0ea035a3d1 [PATCH] libata-hp: implement ata_eh_detach_dev()
Implement ata_eh_detach_dev().  This function is responsible for
detaching an ATA device and offlining the associated SCSI device
atomically so that the detached device is not accessed after ATA
detach is complete.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:28:01 +09:00
Tejun Heo
3edebac41b [PATCH] libata-hp-prep: store attached SCSI device
Add device persistent field dev->sdev and store the attached SCSI
device.  With hotplug, libata needs to know the attached SCSI device
to offline and detach it, but scsi_device_lookup() cannot be used
because libata will reuse SCSI ID numbers - dead but not gone devices
(due to zombie opens, etc...) interfere with the lookup.

dev->sdev doesn't hold reference to the SCSI device.  It's cleared
when the SCSI device goes away.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:40 +09:00
Tejun Heo
315343637b [PATCH] libata-hp-prep: use __ata_scsi_find_dev()
Convert direct sdev -> dev lookup to __ata_scsi_find_dev().

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:36 +09:00
Tejun Heo
ab5b3a5b2d [PATCH] libata-hp-prep: update ata_scsi_find_dev() and friends
Separate out ata_find_dev() and __ata_scsi_find_dev() from
ata_scsi_find_dev().  These will be used by later hotplug
implementation.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:34 +09:00
Jeff Garzik
8190bdb929 [libata] libata-scsi, sata_mv: trim trailing whitespace 2006-05-24 01:53:39 -04:00
Alan Cox
f79d409fae [PATCH] libata - fix bracketing and DMA oops
The upstream tree has the ATA_DFLAG_PIO bug fixed but does not have the
pass throuugh bug fix

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 01:53:00 -04:00
Tejun Heo
f8bbfc247e [PATCH] SCSI: make scsi_implement_eh() generic API for SCSI transports
libata implemented a feature to schedule EH without an associated EH
by manipulating shost->host_eh_scheduled in ata_scsi_schedule_eh()
directly.  Move this function to scsi_error.c and rename it to
scsi_schedule_eh().  It is now an exported API for SCSI transports and
exported via new header file drivers/scsi/scsi_transport_api.h

This patch also de-export scsi_eh_wakeup() which was exported
specifically for ata_scsi_schedule_eh().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20 00:39:08 -04:00
Jeff Garzik
8d4ee71ff6 Merge branch 'max-sect' into upstream 2006-05-15 11:27:47 -04:00
Tejun Heo
a6e6ce8e8d [PATCH] libata-ncq: implement NCQ device configuration
Now that all NCQ related stuff are in place, implement NCQ device
configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ
support.

Original implementation is from Jens Axboe.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 21:03:48 +09:00
Tejun Heo
3dc1d88193 [PATCH] libata-ncq: implement NCQ command translation and exclusion
This patch implements NCQ command translation and exclusion.  Note
that NCQ commands don't use ata_rwcmd_protocol() to choose ATA
command.  This is because, unlike non-NCQ RW commands, NCQ commands
can only be used for NCQ protocol and FUA handling is done with a flag
rather than separate command.

NCQ enabled device will have queue depth larger than one but no two
non-NCQ commands can be issued simultaneously, neither can a non-NCQ
command and NCQ commands.  This patch makes ata_scsi_translate()
return SCSI_MLQUEUE_DEVICE_BUSY if such exclusion is necessary.  SCSI
midlayer will retry the command later.

As SCSI midlayer always retries once a command completes, this doesn't
incur unnecessary delays and as most commands will be NCQ ones for NCQ
device, so the overhead should be negligible.

Initial implementation is from Jens Axboe and using
SCSI_MLQUEUE_DEVICE_BUSY for exclusion is suggested by Jeff Garzik.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 21:03:45 +09:00
Tejun Heo
2115ea94a2 [PATCH] libata-ncq: pass ata_scsi_translate() return value to SCSI midlayer
ata_scsi_translate() will need to return SCSI_ML_QUEUE_DEVICE_BUSY to
achieve exlusion between NCQ and non-NCQ commands or among non-NCQ
commands.  Pass its return value upward to SCSI midlayer.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 21:03:39 +09:00
Tejun Heo
246619da30 [PATCH] libata-eh-fw: update SCSI command completion path for new EH
SCSI command completion path used to do some part of EH including
printing messages and obtaining sense data.  With new EH, all these
are responsibilities of the EH, update SCSI command completion path to
reflect this.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:16 +09:00
Tejun Heo
7b70fc0398 [PATCH] libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort()
ata_port_schedule_eh() directly schedules EH for @ap without
associated qc.  Once EH scheduled, no further qc is allowed and EH
kicks in as soon as all currently active qc's are drained.

ata_port_abort() schedules all currently active commands for EH by
qc_completing them with ATA_QCFLAG_FAILED set.  If ata_port_abort()
doesn't find any qc to abort, it directly schedule EH using
ata_port_schedule_eh().

These two functions provide ways to invoke EH for conditions which
aren't directly related to any specfic qc.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:07 +09:00
Tejun Heo
f15a1dafed [PATCH] libata: use ATA printk helpers
Use ATA printk helpers.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:57:56 +09:00
Tejun Heo
3373efd89d [PATCH] libata: use dev->ap
Use dev->ap where possible and eliminate superflous @ap from functions
and structures.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:57:53 +09:00
Tejun Heo
e61e067227 [PATCH] libata: implement qc->result_tf
Add qc->result_tf and ATA_QCFLAG_RESULT_TF.  This moves the
responsibility of loading result TF from post-compltion path to qc
execution path.  qc->result_tf is loaded if explicitly requested or
the qc failsa.  This allows more efficient completion implementation
and correct handling of result TF for controllers which don't have
global TF representation such as sil3124/32.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:57:40 +09:00
Tejun Heo
c44078c03f [PATCH] libata: silly fix in ata_scsi_start_stop_xlat()
Don't directly access &qc->tf when tf == &qc->tf.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:57:21 +09:00
Jeff Garzik
875999c553 Merge branch 'upstream' 2006-04-12 16:54:16 -04:00
Jeff Garzik
35bb94b116 libata: Add helper ata_shost_to_port() 2006-04-11 13:12:34 -04:00
Jeff Garzik
10a5fd5e6b Merge branch 'master'
Conflicts:

	drivers/scsi/libata-scsi.c
	include/linux/libata.h
2006-04-11 12:51:40 -04:00
Christoph Hellwig
9227c33de8 [PATCH] move ->eh_strategy_handler to the transport class
Overriding the whole EH code is a per-transport, not per-host thing.
Move ->eh_strategy_handler to the transport class, same as
->eh_timed_out.

Downside is that scsi_host_alloc can't check for the total lack of EH
anymore, but the transition period from old EH where we needed it is
long gone already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-10 14:15:47 -04:00
Albert Lee
95de719adc [PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter
Convert the ATAPI_ENABLE_DMADIR compile time option needed
by some SATA-PATA bridge to runtime module parameter.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04 08:44:24 -04:00
Tejun Heo
ece1d63619 [PATCH] libata: separate out libata-eh.c
A lot of EH codes are about to be added to libata.  Separate out
libata-eh.c.  ata_scsi_timed_out(), ata_scsi_error(),
ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and
ata_eh_qc_retry() are moved.  No code is changed by this patch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:21 -04:00
Tejun Heo
35e86b53b1 [PATCH] libata: dec scmd->retries for qcs with zero err_mask
qcs might get retried because of unrelated failure.  e.g. NCQ command
failure causes the whole command set to be aborted.  Decrement
scmd->retries for such retrials to avoid unnecessarily failing
commands.  Note that scmd->retries will be incremented the first time.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:20 -04:00
Tejun Heo
74e6c8c394 [PATCH] libata: don't read TF directly from sense generation functions
TF register might not be directly accessible depending on errors.
e.g. TF of failed NCQ command is in log page 10h.  Make reading TF
responsibility of error handlers.  For the current EH, simply push TF
reading into qc completion functions as they are practically part of
EH.  New EH will fill qc->tf with status registers before complting
qcs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:20 -04:00
Tejun Heo
058e55e120 [PATCH] libata: always generate sense if qc->err_mask is non-zero
Current sense generation code does not generate sense error if status
register value doesn't indicate error condition.  However, LLDD's may
indicate errors which 't show up in status register.  Completing such
qc's without generating sense results in successful completion of
failed commands.

Invoke ata_to_sense_error() regardless of status register if
qc->err_mask is not zero such that ata_to_sense_error() generates
default sense error.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:20 -04:00
Tejun Heo
2719736779 [PATCH] libata: add ATA_QCFLAG_IO
Add a new qc flag ATA_QCFLAG_IO.  This flag gets set for normal IO
commands originating from SCSI midlayer.  This information will be
used by EH to determine transfer speed reconfiguration.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:20 -04:00
Tejun Heo
198e0fed9e [PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED
Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency.
(ATA_FLAG_* are always about ports).

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:19 -04:00
Tejun Heo
c43c555c3a [PATCH] libata: ATA_FLAG_IN_EH is not used, kill it
Kill unused flag ATA_FLAG_IN_EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 10:09:19 -04:00
Tejun Heo
e1211e3fa7 [PATCH] libata: implement ata_dev_enabled and disabled()
This patch renames ata_dev_present() to ata_dev_enabled() and adds
ata_dev_disabled().  This is to discern the state where a device is
present but disabled from not-present state.  This disctinction is
necessary when configuring transfer mode because device selection
timing must not be violated even if a device fails to configure.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01 12:33:45 -05:00
Tejun Heo
8e0e694a3a [PATCH] libata: make ata_qc_issue complete failed qcs
There is no reason for the issuer to diddle with a failed qc as the
issuer has complete control over when a qc gets freed (usually in
->complete_fn).  Make ata_qc_issue() responsible for completing qcs
which failed to issue.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 10:14:42 -05:00
Jeff Garzik
79072f3890 Merge branch 'upstream' 2006-03-29 19:58:22 -05:00
Brian King
2af10a818d [PATCH] libata: ata_scsi_ioctl cleanup
In preparation for SAS, kill some unnecessary code in ata_scsi_ioctl
to find the ATA port and device given the scsi_device. Neither local
is used in the function.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 10:18:43 -05:00
Brian King
eb3f0f9c6c [PATCH] libata: ata_scsi_queuecmd cleanup
Encapsulate part of ata_scsi_queuecmd so that it can be
reused by future SAS patches.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 10:18:43 -05:00
Jeff Garzik
2e9edbf815 [libata] export ata_dev_pair; trim trailing whitespace
Mostly, trim trailing whitespace.

Also:
* export ata_dev_pair
* move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 09:56:57 -05:00