Commit Graph

14051 Commits (140a1ef2f91a00e1d25f0878c193abdc25bf6ebe)

Author SHA1 Message Date
Linus Torvalds 8ea656bdc9 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (21 commits)
  ARM: OMAP4: MMC: increase delay for pbias
  arm: omap2plus: move NAND_BLOCK_SIZE out of boards
  omap4: hwmod: Enable the keypad
  omap3: Free Beagle rev gpios when they are read, so others can read them later
  arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
  omap: rx51: Don't power up speaker amplifier at bootup
  omap: rx51: Set regulator V28_A always on
  ARM: OMAP4: MMC: no regulator off during probe for eMMC
  arm: omap2plus: fix ads7846 pendown gpio request
  ARM: OMAP2: Add missing iounmap in omap4430_phy_init
  ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
  ARM: omap2+: mux: Allow board mux settings to be NULL
  OMAP4: fix return value of omap4_l3_init
  OMAP: iovmm: fix SW flags passed by user
  arch/arm/mach-omap1/dma.c: Invert calls to platform_device_put and platform_device_del
  OMAP2+: mux: fix compilation warnings
  OMAP: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'
  arm: omap3: cm-t3517: fix section mismatch warning
  OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o
  ARM: OMAP2: Add missing include of linux/gpio.h
  ...
2011-06-07 18:46:37 -07:00
Linus Torvalds 0792644d22 Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra
* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  ARM: Tegra: Harmony: Fix conflicting GPIO numbering
2011-06-05 08:11:11 +09:00
Stephen Warren f2a4d8ae4d ARM: Tegra: Harmony: Fix conflicting GPIO numbering
Currently, both the WM8903 and TPS6586x chips attempt to register with
gpiolib using the same GPIO numbers. This causes the audio driver to
fail to initialize.

To solve this, add a define to board-harmony.h for the TPS6586x, and make
board-harmony-power.c use this define, instead of directly referencing
TEGRA_NR_GPIOS.

This fixes a regression introduced by commit
6f168f2fa6.
ARM: tegra: harmony: initialize the TPS65862 PMIC

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
2011-06-04 15:51:52 -07:00
Linus Torvalds cd4ecf877a Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: add DMAC clock definitions on SH7372
  ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO
  sh_mobile_meram: MERAM platform data for LCDC
2011-06-04 07:53:23 +09:00
Guennadi Liakhovetski 816af7422f ARM: mach-shmobile: add DMAC clock definitions on SH7372
These definitions are needed to let the runtime PM subsystem turn off
DMAC clocks, when it is suspended by the driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02 14:45:33 +09:00
Balaji T K 1fcecf281b ARM: OMAP4: MMC: increase delay for pbias
4 micro seconds is not enough for PBIAS if MMC regulator is
enabled from MMC regulator OFF.
Increase the delay for PBIAS to stabilize.
Wait for PBIAS and timeout if not.

Resolves MMC/SD failure on OMAP4
"Pbias Voltage is not same as LDO"

Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by:  Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 04:48:15 -07:00
Igor Grinberg 1704bf15de arm: omap2plus: move NAND_BLOCK_SIZE out of boards
Several boards defining mtd partitions also defined NAND_BLOCK_SIZE as
SZ_128K. Move the define to common-board-devices.h

This removes multiple defines of NAND_BLOCK_SIZE.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:05 -07:00
Shubhrajyoti D 4998b24573 omap4: hwmod: Enable the keypad
Commit 407a6888f7 (OMAP4: hwmod data:
Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPU) added the
entry for keypad, but did not enable it.

Enable the keypad in the hwmod database so it works.

Signed-off-by: Shubhrajyoti D<shubhrajyoti@ti.com>
Acked-by: Benoit Cousson<b-cousson@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:05 -07:00
Tasslehoff Kjappfot 5e2ffc308a omap3: Free Beagle rev gpios when they are read, so others can read them later
Free Beagle rev gpios when they are read, so others can read them later

Signed-off-by: Tasslehoff Kjappfot <tasskjapp@gmail.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:05 -07:00
Alexander Holler e2a346a2a0 arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Without msecure beeing high it isn't possible to set (or start)
the RTC.

Tested with a BeagleBoard C4.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:05 -07:00
Jarkko Nikula c0ad4fac50 omap: rx51: Don't power up speaker amplifier at bootup
Speaker amplifier is accidentally powered up in early TWL gpio setup. This
causes a few mA of needless battery current consumption. Without this patch
the amplifier can be shutdown only by having one active audio playback and
shutdown cycle to speaker output.

Thanks to Kalle Jokiniemi <kalle.jokiniemi@nokia.com> for noticing the issue.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:05 -07:00
Jarkko Nikula 2827411e25 omap: rx51: Set regulator V28_A always on
The V28_A domain in Nokia N900 that supplies VDD voltages to TLV320AIC34 and
TPA6130A2 should not be shutdown. This is because otherwise there will be
leak from VIO to VDD in TLV320AIC34 and this leak consumes more battery
current that is saved from keeping V28_A off. With this patch the battery
current consumption is approximately 1.5 mA lower.

Thanks to Kalle Jokiniemi <kalle.jokiniemi@nokia.com> for noticing the issue.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:05 -07:00
Balaji T K b1c1df7a7d ARM: OMAP4: MMC: no regulator off during probe for eMMC
eMMC does not handle power off when not in sleep state,
Skip regulator disable during probe when eMMC is
not in known state - state left by bootloader.

Resolves eMMC failure on OMAP4
mmc0: error -110 whilst initialising MMC card

Signed-off-by: Balaji T K <balajitk@ti.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Igor Grinberg e68273baf3 arm: omap2plus: fix ads7846 pendown gpio request
introduced by: 96974a24
(omap: consolidate touch screen initialization among different boards)

ads7846 driver can use either gpio_pendown or get_pendown_state()
callback. In case of gpio_pendown, it requests the provided gpio_pendown
thus resulting in double requesting that gpio:

ads7846 spi1.0: failed to request pendown GPIO57
ads7846: probe of spi1.0 failed with error -16

Fix this by restricting the gpio request to the case of
get_pendown_state() callback is used.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Todd Poynor 03b562d785 ARM: OMAP2: Add missing iounmap in omap4430_phy_init
!dev case needs iounmap before return.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Colin Cross 21a42c9275 ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
OMAP4 contains two separate instances of the padconf registers,
one in the core system config and one in the wakeup system config.
Pass in two tables to apply the correct values to each instance.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Colin Cross d4ff6121b4 ARM: omap2+: mux: Allow board mux settings to be NULL
OMAP4 has two mux instances, and the board may not have settings
for one of them.  Allow the board file to pass NULL for an
instance's mux settings, which will initialize the mux instance
but skip writing board settings.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Rabin Vincent 1499f2dbaf OMAP4: fix return value of omap4_l3_init
Don't PTR_ERR() a non-error pointer:

 initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs
 initcall omap4_l3_init+0x0/0xdc returned with error code -544980480

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Omar Ramirez Luna 50b4860d57 OMAP: iovmm: fix SW flags passed by user
Commit d038aee24d
"omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag",
changes iovmm to receive flags specified by user, however
the upper 16 bits of the flags are wiped by iovmm itself.

This fixes IOVMF_DA_FIXED flags from being lost, and lets the user
map its desired "device addresses".

Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Julia Lawall 77f7059a32 arch/arm/mach-omap1/dma.c: Invert calls to platform_device_put and platform_device_del
Platform_device_del should be called before platform_device_put, as
platform_device_put can delete the structure.

Additionally, improve the error handling code for the call to ioremap, so
that it calls platform_device_put.

The semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2;
@@

*platform_device_put(e1);
... when != e1 = e2
*platform_device_del(e1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 02:25:04 -07:00
Govindraj.R 30ebad9d75 OMAP2+: mux: fix compilation warnings
Fix below compilation warnings.

arch/arm/mach-omap2/omap_hwmod.c: In function 'omap_hwmod_for_each':
arch/arm/mach-omap2/omap_hwmod.c:1631: warning: 'ret' may be used uninitialized in this function

arch/arm/mach-omap2/mux.c: In function 'omap_mux_get_gpio':
arch/arm/mach-omap2/mux.c:917: warning: 'm' may be used uninitialized in this function

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 00:16:04 -07:00
Santosh Shilimkar 26a510ba12 OMAP: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'
Fix below build warning.

 CC	arch/arm/plat-omap/sram.o
	arch/arm/plat-omap/sram.c: In function 'omap_map_sram':
	arch/arm/plat-omap/sram.c:224: warning: format '%08lx' expects
	type 'long unsigned int', but argument 2 has type 'unsigned int'

While at this, convert SRAM printk(* "") to pr_*("").

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31 06:17:02 -07:00
Igor Grinberg 026fe79d75 arm: omap3: cm-t3517: fix section mismatch warning
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x11014): Section mismatch
in reference from the function cm_t3517_init_usbh() to the (unknown
reference) .init.data:(unknown)
The function cm_t3517_init_usbh() references
the (unknown reference) __initdata (unknown).
This is often because cm_t3517_init_usbh lacks a __initdata
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31 06:17:02 -07:00
Santosh Shilimkar 89c4705ed5 OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o
The serial*_data should have been marked as __initdata as per
it's usage in the board files. Fix the same to remove the
section mismatch warnings caused by it.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Silesh C V <silesh@ti.com>
[tony@atomide.com: updated with additional fixes from Silesh]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31 06:17:02 -07:00
Axel Lin f9fa1bb9d7 ARM: OMAP2: Add missing include of linux/gpio.h
I got some build error like below while executing "make omap2plus_defconfig".

  CC      arch/arm/mach-omap2/board-2430sdp.o
arch/arm/mach-omap2/board-2430sdp.c: In function 'omap_2430sdp_init':
arch/arm/mach-omap2/board-2430sdp.c:247: error: 'GPIOF_OUT_INIT_LOW' undeclared (first use in this function)
arch/arm/mach-omap2/board-2430sdp.c:247: error: (Each undeclared identifier is reported only once
arch/arm/mach-omap2/board-2430sdp.c:247: error: for each function it appears in.)

This patch fixes the build error by include linux/gpio.h instead of mach/gpio.h.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Syed Mohammed Khasim <x0khasim@ti.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Cc: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31 06:17:01 -07:00
Janusz Krzysztofik 046d886db1 OMAP: fix compilation error
Forward-declare platform_device structure in
arch/arm/plat-omap/include/plat/flash.h, otherwise compilation may break
with:

In file included from arch/arm/mach-omap1/flash.c:15:
arch/arm/plat-omap/include/plat/flash.h:14: warning: 'struct platform_device' declared inside parameter list
arch/arm/plat-omap/include/plat/flash.h:14: warning: its scope is only this definition or declaration, which is probably not what you want
arch/arm/mach-omap1/flash.c:16: warning: 'struct platform_device' declared inside parameter list
arch/arm/mach-omap1/flash.c:17: error: conflicting types for 'omap1_set_vpp'
arch/arm/plat-omap/include/plat/flash.h:14: error: previous declaration of 'omap1_set_vpp' was here

Detected and corrected while building for Amstrad Delta, confirmed with
omap1_defconfig.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-31 06:17:01 -07:00
Linus Torvalds 04830fccdc Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  gpio/pch_gpio: Support new device ML7223
  gpio: make gpio_{request,free}_array gpio array parameter const
  GPIO: OMAP: move to drivers/gpio
  GPIO: OMAP: move register offset defines into <plat/gpio.h>
  gpio: Convert gpio_is_valid to return bool
  gpio: Move the s5pc100 GPIO to drivers/gpio
  gpio: Move the s5pv210 GPIO to drivers/gpio
  gpio: Move the exynos4 GPIO to drivers/gpio
  gpio: Move to Samsung common GPIO library to drivers/gpio
  gpio/nomadik: add function to read GPIO pull down status
  gpio/nomadik: show all pins in debug
  gpio: move Nomadik GPIO driver to drivers/gpio
  gpio: move U300 GPIO driver to drivers/gpio
  langwell_gpio: add runtime pm support
  gpio/pca953x: Add support for pca9574 and pca9575 devices
  gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535
2011-05-28 10:56:34 -07:00
Linus Torvalds 571503e100 Merge branch 'setns'
* setns:
  ns: Wire up the setns system call

Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call
2011-05-28 10:51:01 -07:00
Eric W. Biederman 7b21fddd08 ns: Wire up the setns system call
32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28 10:48:39 -07:00
Grant Likely 1486a7409b Merge branch 'for_2.6.40/gpio-move' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next 2011-05-27 23:52:58 -06:00
Linus Torvalds 29a6ccca38 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (97 commits)
  mtd: kill CONFIG_MTD_PARTITIONS
  mtd: remove add_mtd_partitions, add_mtd_device and friends
  mtd: convert remaining users to mtd_device_register()
  mtd: samsung onenand: convert to mtd_device_register()
  mtd: omap2 onenand: convert to mtd_device_register()
  mtd: txx9ndfmc: convert to mtd_device_register()
  mtd: tmio_nand: convert to mtd_device_register()
  mtd: socrates_nand: convert to mtd_device_register()
  mtd: sharpsl: convert to mtd_device_register()
  mtd: s3c2410 nand: convert to mtd_device_register()
  mtd: ppchameleonevb: convert to mtd_device_register()
  mtd: orion_nand: convert to mtd_device_register()
  mtd: omap2: convert to mtd_device_register()
  mtd: nomadik_nand: convert to mtd_device_register()
  mtd: ndfc: convert to mtd_device_register()
  mtd: mxc_nand: convert to mtd_device_register()
  mtd: mpc5121_nfc: convert to mtd_device_register()
  mtd: jz4740_nand: convert to mtd_device_register()
  mtd: h1910: convert to mtd_device_register()
  mtd: fsmc_nand: convert to mtd_device_register()
  ...

Fixed up trivial conflicts in
 - drivers/mtd/maps/integrator-flash.c: removed in ARM tree
 - drivers/mtd/maps/physmap.c: addition of afs partition probe type
   clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-27 20:06:53 -07:00
Linus Torvalds 2a56d22202 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  ARM: 6945/1: Add unwinding support for division functions
  ARM: kill pmd_off()
  ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks
  ARM: 6943/1: mm: use TTBR1 instead of reserved context ID
  ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7
  ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
  ARM: add sendmmsg syscall
  ARM: 6863/1: allow hotplug on msm
  ARM: 6832/1: mmci: support for ST-Ericsson db8500v2
  ARM: 6830/1: mach-ux500: force PrimeCell revisions
  ARM: 6829/1: amba: make hardcoded periphid override hardware
  ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID
  ARM: 6827/1: mach-netx: delete hardcoded periphid
  ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume
  ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2
  ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM
  ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM
  at91: drop at572d940hf support
  at91rm9200: introduce at91rm9200_set_type to specficy cpu package
  at91: drop boot_params and PLAT_PHYS_OFFSET
  ...
2011-05-27 19:51:32 -07:00
Russell King 239df0fd5e Merge branches 'devel', 'devel-stable' and 'fixes' into for-linus 2011-05-27 22:59:57 +01:00
Laura Abbott 81479c246c ARM: 6945/1: Add unwinding support for division functions
The software division functions never had unwinding annotations
added. Currently, when a division by zero occurs the backtrace shown
will stop at Ldiv0 or some completely unrelated function. Add
unwinding annotations in hopes of getting a more useful backtrace
when a division by zero occurs.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-27 22:56:53 +01:00
Linus Torvalds ea0ca3a843 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  PXA: Use dev_pm_ops in z2_battery
  ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery
  ds2760_battery: Fix indexing of the 4 active full EEPROM registers
  power: Make test_power driver more dynamic.
  bq27x00_battery: Name of cycle count property
  max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)
  ARM: RX-51: Enable isp1704 power on/off
  isp1704_charger: Allow board specific powering routine
  gpio-charger: Add gpio_charger_resume
  power_supply: Add driver for MAX8903 charger
2011-05-27 10:12:35 -07:00
Kevin Hilman e5cdb13ff9 GPIO: OMAP: move to drivers/gpio
Move OMAP GPIO driver to drivers/gpio.  Builds whenever
CONFIG_ARCH_OMAP=y.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-27 08:43:34 -07:00
Kevin Hilman 5ee1a81b84 GPIO: OMAP: move register offset defines into <plat/gpio.h>
Register offset defines are moved to <plat/gpio.h> so they can be used
by SoC-specific device init code to fill out platform_data register
offsets.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-27 08:43:34 -07:00
Akinobu Mita 04b18ff9ca arm: use asm-generic/bitops/le.h
The previous style change enables to use asm-generic/bitops/le.h on arm.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:38 -07:00
Akinobu Mita a2812e1783 arch: add #define for each of optimized find bitops
The style that we normally use in asm-generic is to test the macro itself
for existence, so in asm-generic, do:

	#ifndef find_next_zero_bit_le
	extern unsigned long find_next_zero_bit_le(const void *addr,
		unsigned long size, unsigned long offset);
	#endif

and in the architectures, write

	static inline unsigned long find_next_zero_bit_le(const void *addr,
		unsigned long size, unsigned long offset)
	#define find_next_zero_bit_le find_next_zero_bit_le

This adds the #define for each of the optimized find bitops in the
architectures.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:38 -07:00
Kyungmin Park 82ab0f75ee gpio: Move the s5pc100 GPIO to drivers/gpio
Move the Samsung s5pc100 SoC GPIO driver to drivers/gpio

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:33:41 -06:00
Kyungmin Park 347ec4e47d gpio: Move the s5pv210 GPIO to drivers/gpio
Move the Samsung s5pv210 SoC GPIO driver to drivers/gpio

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:33:37 -06:00
Kyungmin Park ab48f16137 gpio: Move the exynos4 GPIO to drivers/gpio
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:32:50 -06:00
Kyungmin Park fed6a02247 gpio: Move to Samsung common GPIO library to drivers/gpio
It's common gpiolib for recent Samsung SoCs. Move to drivers/gpio

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:31:22 -06:00
Rickard Andersson bc6f5cf648 gpio/nomadik: add function to read GPIO pull down status
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com>
Reviewed-by: Martin Persson <martin.persson@stericsson.com>
[Split off from larger patch]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:30:18 -06:00
Grant Likely 37d7245764 gpio: move Nomadik GPIO driver to drivers/gpio
This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik
and into the desired location indicated by the subsystem
maintainer.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[grant.likely: squashed with kconfig fixup]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:30:03 -06:00
Linus Walleij 06caa7ad83 gpio: move U300 GPIO driver to drivers/gpio
This moves the U300 GPIO driver out of arch/arm/mach-u300 and into
the desired location indicated by the subsystem maintainer.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26 17:29:33 -06:00
Linus Torvalds 9f1912c48c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (57 commits)
  regulator: Fix 88pm8607.c printk format warning
  input: Add support for Qualcomm PMIC8XXX power key
  input: Add Qualcomm pm8xxx keypad controller driver
  mfd: Add omap-usbhs runtime PM support
  mfd: Fix ASIC3 SD Host Controller Configuration size
  mfd: Fix omap_usbhs_alloc_children error handling
  mfd: Fix omap usbhs crash when rmmoding ehci or ohci
  mfd: Add ASIC3 LED support
  leds: Add ASIC3 LED support
  mfd: Update twl4030-code maintainer e-mail address
  mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp
  mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0
  mfd: Provide ab8500-core enumerators for chip cuts
  mfd: Check twl4030-power remove script error condition after i2cwrite
  mfd: Fix twl6030 irq definitions
  mfd: Add phoenix lite (twl6025) support to twl6030
  mfd: Avoid to use constraint name in 88pm860x regulator driver
  mfd: Remove checking on max8925 regulator[0]
  mfd: Remove unused parameter from 88pm860x API
  mfd: Avoid to allocate 88pm860x static platform data
  ...
2011-05-26 12:14:20 -07:00
Linus Torvalds 829ae27329 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits)
  OMAP3: PM: Boot message is not an error, and not helpful, remove it
  OMAP3: cpuidle: change the power domains modes determination logic
  OMAP3: cpuidle: code rework for improved readability
  OMAP3: cpuidle: re-organize the C-states data
  OMAP3: clean-up mach specific cpuidle data structures
  OMAP3 cpuidle: remove useless SDP specific timings
  usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
  usb: otg: OMAP4430: Fixing the omap4430_phy_init function
  usb: musb: am35x: fix compile error when building am35x
  usb: musb: OMAP4430: Power down the PHY during board init
  omap: drop board-igep0030.c
  omap: igep0020: add support for IGEP3
  omap: igep0020: minor refactoring
  omap: igep0020: name refactoring for future merge with IGEP3
  omap: Remove support for omap2evm
  arm: omap2plus: GPIO cleanup
  omap: musb: introduce default board config
  omap: move detection of NAND CS to common-board-devices
  omap: use common initialization for PMIC i2c bus
  omap: consolidate touch screen initialization among different boards
  ...
2011-05-26 12:11:54 -07:00
Russell King cc780af5ac ARM: kill pmd_off()
pmd_off() has only one user, so lets consolidate this into its only
user.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26 19:50:30 +01:00
Lesly A M d7ac829fa3 mfd: Modifying the twl4030-power macro name Main_Ref to all caps
Modifying the macro name Main_Ref to all caps(MAIN_REF).

Suggested by Nishanth Menon <nm@ti.com>

Signed-off-by: Lesly A M <leslyam@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: David Derrick <dderrick@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:23 +02:00