Commit graph

179 commits

Author SHA1 Message Date
Andrew Patterson
bd1f46deba PCI: fix nested spinlock hang in aer_inject
The aer_inject module hangs in aer_inject() when checking the device's
error masks.  The hang is due to a recursive use of the aer_inject lock.
The aer_inject() routine grabs the lock while processing the error and then
calls pci_read_config_dword to read the masks. The pci_read_config_dword
routine is earlier overridden by pci_read_aer, which among other things,
grabs the aer_inject lock.

Fixed by moving the pci_read_config_dword calls to read the masks to before
the lock is taken.

Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-25 10:42:52 -08:00
Youquan,Song
b49bfd3290 PCIe AER: prevent AER injection if hardware masks error reporting
The Correcteable/Uncorrectable Error Mask Registers are used by PCIe AER
driver which will controls the reporting of individual errors to PCIe RC
via PCIe error messages.

If hardware masks special error reporting to RC, the aer_inject driver
should not inject aer error.

Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Youquan, Song <youquan.song@intel.com>
Acked-by: Ying, Huang <ying.huang@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04 15:52:49 -08:00
Youquan,Song
46256f83d0 PCI: AER: fix aer inject result in kernel oops
If the BIOS does not export _OSC to allow OS take over the PCIe AER, the
pcie aer driver will not initialize the aer service. However, the
aer_inject driver does not check this scenario, which results in a kernel
oops when injecting an aer error into OS.  For example:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
IP: [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23
PGD 155c41067 PUD 157fe0067 PMD 0
Oops: 0002 [#1] SMP
Pid: 5119, comm: aer-inject Not tainted 2.6.32-rc8-mce #2
RIP: 0010:[<ffffffff812e08f7>]  [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23
RSP: 0018:ffff880157f81e28  EFLAGS: 00010096
RAX: 0000000000000296 RBX: 0000000000000000 RCX: 0000000000000100
RDX: 0000000000010000 RSI: 0000000000000246 RDI: 0000000000000350
RBP: ffff880157f81e28 R08: 0000000000000004 R09: ffff880157f81dac
R10: ffff88015a666f60 R11: ffff88015a666f40 R12: ffff88015758cc00
R13: 0000000000000350 R14: 0000000000000000 R15: 0000000000000100
FS:  00007f4d4a66e6f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000350 CR3: 000000015661a000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process aer-inject (pid: 5119, threadinfo ffff880157f80000, task ffff8801585f4340)
Stack:
 ffff880157f81e78 ffffffff811b1615 ffff880157f81e78 ffffffff81222823
Call Trace:
 [<ffffffff811b1615>] aer_irq+0x38/0x117
 [<ffffffff81222823>] ? device_for_each_child+0x5f/0x6f
 [<ffffffffa00967bf>] aer_inject_write+0x409/0x45e [aer_inject]
 [<ffffffff810eb80e>] vfs_write+0xae/0x16a
 [<ffffffff810eb98e>] sys_write+0x47/0x6e
 [<ffffffff8100ba2b>] system_call_fastpath+0x16/0x1b
RIP  [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23
 RSP <ffff880157f81e28>
CR2: 0000000000000350

So check the _OSC before assuming that AER is available to the OS.

Signed-off-by: Youquan, Song <youquan.song@intel.com>
Acked-by: Ying, Huang <ying.huang@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04 08:31:46 -08:00
Hidetoshi Seto
40da4186a5 PCI: pcie portdrv: style cleanup
No change in logic.

Before:
  drivers/pci/pcie/portdrv_core.c:
    total: 7 errors, 2 warnings, 508 lines checked
  drivers/pci/pcie/portdrv_pci.c:
    total: 4 errors, 2 warnings, 300 lines checked

After:
  drivers/pci/pcie/portdrv_core.c:
    total: 0 errors, 0 warnings, 506 lines checked
  drivers/pci/pcie/portdrv_pci.c:
    total: 0 errors, 0 warnings, 299 lines checked

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04 08:29:37 -08:00
Stefan Assmann
7e8af37a9a PCI: change PCI nomenclature in drivers/pci/ (non-comment changes)
Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG
terms listed in the "Trademark and Logo Usage Guidelines".
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf

Patch is limited to drivers/pci/ and changes concern non-comment parts or
anything that might be visible to the user.

Signed-off-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16 13:37:54 -08:00
Stefan Assmann
45e829ea41 PCI: change PCI nomenclature in drivers/pci/ (comment changes)
Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG
terms listed in the "Trademark and Logo Usage Guidelines".
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf

Patch is limited to drivers/pci/ and changes concern comments only.

Signed-off-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16 13:37:53 -08:00
Alexey Dobriyan
471452104b const: constify remaining dev_pm_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:25 -08:00
Kenji Kaneshige
b26a34aa47 PCI: fix BUG_ON triggered by logical PCIe root port removal
This problem happened when removing PCIe root port using PCI logical
hotplug operation.

The immediate cause of this problem is that the pointer to invalid
data structure is passed to pcie_update_aspm_capable() by
pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received
a pointer to root port link, it unconfigures the root port link and
frees its data structure at first. At this point, there are not links
to configure under the root port and the data structure for root port
link is already freed. So pcie_aspm_exit_link_state() must not call
pcie_update_aspm_capable() and pcie_config_aspm_path().

This patch fixes the problem by changing pcie_aspm_exit_link_state()
not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if
the specified link is root port link.

------------[ cut here ]------------
kernel BUG at drivers/pci/pcie/aspm.c:606!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove
CPU 1
Modules linked in: shpchp
Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6
RIP: 0010:[<ffffffff811df69b>]  [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe
RSP: 0018:ffff88082a2f5ca0  EFLAGS: 00010202
RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006
RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000
RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000
R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000
R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20
FS:  00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00)
Stack:
 ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00
<0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168
<0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2
Call Trace:
 [<ffffffff811dff52>] pcie_aspm_exit_link_state+0xf5/0x11e
 [<ffffffff811d7db2>] pci_stop_bus_device+0x76/0x7e
 [<ffffffff811d7d67>] pci_stop_bus_device+0x2b/0x7e
 [<ffffffff811d7e4f>] pci_remove_bus_device+0x15/0xb9
 [<ffffffff811dcb8c>] remove_callback+0x29/0x3a
 [<ffffffff81135aeb>] sysfs_schedule_callback_work+0x15/0x6d
 [<ffffffff81072790>] worker_thread+0x19d/0x298
 [<ffffffff8107273b>] ? worker_thread+0x148/0x298
 [<ffffffff81135ad6>] ? sysfs_schedule_callback_work+0x0/0x6d
 [<ffffffff810765c0>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff810725f3>] ? worker_thread+0x0/0x298
 [<ffffffff8107629e>] kthread+0x7d/0x85
 [<ffffffff8102eafa>] child_rip+0xa/0x20
 [<ffffffff8102e4bc>] ? restore_args+0x0/0x30
 [<ffffffff81076221>] ? kthread+0x0/0x85
 [<ffffffff8102eaf0>] ? child_rip+0x0/0x20
Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c
RIP  [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe
 RSP <ffff88082a2f5ca0>
---[ end trace 6ae0f65bdeab8555 ]---

Reported-by: Alex Chiang <achiang@hp.com>
Tested-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 16:09:59 -08:00
Andrew Patterson
638bba0828 PCI: remove ifdefed pci_cleanup_aer_correct_error_status
The pci_cleanup_aer_correct_error_status() function has been
#if 0'd out since 2.6.25.  Time to remove the dead code.

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 16:03:19 -08:00
Andrew Patterson
6cdfd995a6 PCI: unconditionally clear AER uncorr status register during cleanup
The current implementation of pci_cleanup_aer_uncorrect_error_status
only clears either fatal or non-fatal error status bits depending
on the state of the I/O channel. This implementation will then often
leave some bits set after PCI error recovery completes.  The uncleared bit
settings will then be falsely reported the next time an AER interrupt is
generated for that hierarchy. An easy way to illustrate this issue is to
use the aer-inject module to simultaneously inject both an uncorrectable
non-fatal and uncorrectable fatal error.  One of the errors will not be
cleared.

This patch resolves this issue by unconditionally clearing all bits in
the AER uncorrectable status register. All settings and corrective action
strategies are saved and determined before
pci_cleanup_aer_uncorrect_error_status is called, so this change should not
affect errory handling functionality.

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 16:03:11 -08:00
Kenji Kaneshige
f9f45604ed PCI: portdrv: remove redundant definitions
Remove unnecessary definitions from portdrv.h and use generic
definitions instead.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:56:24 -08:00
Kenji Kaneshige
694f88ef7a PCI: portdrv: remove unnecessary struct pcie_port_data
Remove 'port_type' field in struct pcie_port_data(), because we can
get port type information from struct pci_dev. With this change, this
patch also does followings:

 - Remove struct pcie_port_data because it no longer has any field.
 - Remove portdrv private definitions about port type (PCIE_RC_PORT,
   PCIE_SW_UPSTREAM_PORT and PCIE_SW_DOWNSTREAM_PORT), and use generic
   definitions instead.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:56:19 -08:00
Kenji Kaneshige
40717c39b1 PCI: portdrv: minor cleanup for pcie_port_device_register
Minor cleanups for pcie_port_device_register().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:56:10 -08:00
Kenji Kaneshige
fbb5de70bb PCI: portdrv: add missing irq cleanup
Add missing service irqs cleanup in the error code path of
pcie_port_device_register().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:56:06 -08:00
Kenji Kaneshige
1ce5e83063 PCI: portdrv: enable device before irq initialization
Call pci_enable_device() before initializing service irqs, because
legacy interrupt is initialized in pci_enable_device() on some
architectures.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:55:59 -08:00
Kenji Kaneshige
dc5351784e PCI: portdrv: cleanup service irqs initialization
This patch cleans up the service irqs initialization as follows:

 - Remove 'irq_mode' field in pcie_port_data and related definitions,
   which is not needed because we can get the same information from
   'is_msix', 'is_msi' and 'pin' fields in struct pci_dev.

 - Change the name of 'vectors' argument of assign_interrupt_mode() to
   'irqs' because it holds irq numbers actually. People might confuse
   it with CPU vector or MSI/MSI-X vector.

 - Change function name assign_interrupt_mode() to init_service_irqs()
   becasuse we no longer have 'irq_mode' data structure, and new name
   is more straightforward (IMO).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:55:51 -08:00
Kenji Kaneshige
d013598d9a PCI: portdrv: check capabilities first
Move capability check capability to the beginning of
pcie_port_device_register() prevents redundant execution path.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:55:44 -08:00
Kenji Kaneshige
9e5d0b16da PCI: portdrv: move PME capability check
No reason to check PME capability outside get_port_device_capability().
Do it in get_port_device_capability().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:55:37 -08:00
Kenji Kaneshige
2dd60e96b4 PCI: portdrv: remove redundant pcie type calculation
PCIe port type is already stored in 'pcie_type' field of struct
pci_dev. So we don't need to get it from pci configuration space.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:55:26 -08:00
Kenji Kaneshige
52a0f24bea PCI: portdrv: cleanup pcie_device registration
In the current port bus driver implementation, pcie_device allocation,
initialization and registration are done in separated functions. Doing
those in one function make the code simple and easier to read.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:55:18 -08:00
Kenji Kaneshige
898294c975 PCI: portdrv: remove redundant pcie_port_device_probe
We don't need pcie_port_device_probe() because we can get pci
device/port type using pci_is_pcie() and 'pcie_type' fields in struct
pci_dev. Remove pcie_port_device_probe().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:55:12 -08:00
Kenji Kaneshige
b44d7db364 PCIe AER: use pci_is_pcie()
Changes for PCIe AER driver to use pci_is_pcie() instead of checking
pci_dev->is_pcie.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:17 -08:00
Kenji Kaneshige
8b06477dc4 PCIe ASPM: use pci_is_pcie()
Change for PCIe ASPM driver to use pci_is_pcie() instead of checking
pci_dev->is_pcie.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:17 -08:00
Kenji Kaneshige
db9538a749 PCIe ASPM: use pci_pcie_cap()
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCIe ASPM driver. This avoids unnecessary search in PCI
configuration space.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:14 -08:00
Kenji Kaneshige
dba90dfe48 PCIe port bus: use pci_pcie_cap()
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCI Express Port Bus driver. This avoids unnecessary serarch
in PCI configuration space.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:13 -08:00
Kenji Kaneshige
39a53062cb PCIe AER: use pci_pcie_cap()
Use pcie_cap() instead of pci_find_capability() to get PCIe capability
offset in PCIe AER driver. This avoids unnecessary search in PCI
configuration space.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:13 -08:00
Andrew Patterson
476f644edf PCI: fix memory leak in aer_inject
Fixed probable typo in aer_inject cleanup code resulting in a memory
leak.

Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 13:06:38 -08:00
Andrew Patterson
1d02435594 PCI: use better error return values in aer_inject
Replaced some error return values in aer_inject. Use -ENODEV when we
can't find a device and -ENOTTY when the device does not support PCIe AER.

Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 13:06:38 -08:00
Andrew Patterson
cc5d153a0c PCI: add support for PCI domains to aer_inject
Add support for PCI domains (segments) to aer_inject.

Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 13:06:37 -08:00
Matt Domsch
0584396157 PCI: PCIe AER: honor ACPI HEST FIRMWARE FIRST mode
Feedback from Hidetoshi Seto and Kenji Kaneshige incorporated.  This
correctly handles PCI-X bridges, PCIe root ports and endpoints, and
prints debug messages when invalid/reserved types are found in the
HEST.  PCI devices not in domain/segment 0 are not represented in
HEST, thus will be ignored.

Today, the PCIe Advanced Error Reporting (AER) driver attaches itself
to every PCIe root port for which BIOS reports it should, via ACPI
_OSC.

However, _OSC alone is insufficient for newer BIOSes.  Part of ACPI
4.0 is the new APEI (ACPI Platform Error Interfaces) which is a way
for OS and BIOS to handshake over which errors for which components
each will handle.  One table in ACPI 4.0 is the Hardware Error Source
Table (HEST), where BIOS can define that errors for certain PCIe
devices (or all devices), should be handled by BIOS ("Firmware First
mode"), rather than be handled by the OS.

Dell PowerEdge 11G server BIOS defines Firmware First mode in HEST, so
that it may manage such errors, log them to the System Event Log, and
possibly take other actions.  The aer driver should honor this, and
not attach itself to devices noted as such.

Furthermore, Kenji Kaneshige reminded us to disallow changing the AER
registers when respecting Firmware First mode.  Platform firmware is
expected to manage these, and if changes to them are allowed, it could
break that firmware's behavior.

The HEST parsing code may be replaced in the future by a more
feature-rich implementation.  This patch provides the minimum needed
to prevent breakage until that implementation is available.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 13:06:25 -08:00
Linus Torvalds
2caa731819 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Prevent AER driver from being loaded on non-root port PCIE devices
  PCI: get larger bridge ranges when space is available
  PCI: pci.c: fix kernel-doc notation
  PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers
  PCI PM: Read device power state from register after updating it
  PCI: remove pci_assign_resource_fixed()
  PCI: PCIe portdrv: remove "-driver" from driver name
2009-10-12 14:38:34 -07:00
Alexey Dobriyan
d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Kenji Kaneshige
30fc24b5cb PCI: Prevent AER driver from being loaded on non-root port PCIE devices
A bug was seen on boards using a PLX 8518 switch device which advertises
AER on each of it's transparent bridges. The AER driver was loaded for
each bridge and this driver tried to access the AER source ID register
whenever an interrupt occured on the shared PCI INTX lines. The source
ID register does not exist on non root port PCIE device's  which
advertise AER and trying to access this register causes a unsupported
request error on the bridge. Thus, when the next interrupt occurs,
another error is found and the non existent source ID register is
accessed again, and so it goes on.

The result is a spammed dmesg with unsupported request PCI express
errors on the bridge device that the AER driver is loaded against.

Reported-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-07 09:28:56 -07:00
Bjorn Helgaas
e3fb20f9c8 PCI: PCIe portdrv: remove "-driver" from driver name
No need to include "-driver" in the driver name.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Tom Long Nguyen <tom.l.nguyen@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-06 09:41:48 -07:00
Andi Kleen
3e77a3f789 PCI: Disable AER with pci=nomsi
When booting with pci=nomsi aer causes lost interrupts and
lockdep inversions.

So check if MSIs are not disabled before initializing the aer
driver.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-17 10:05:27 -07:00
Kenji Kaneshige
7557b5d632 PCI ASPM: support L1 only
The definition of the ASPM support field in the Link Capabilities
Register had been changed by the "ASPM optionality ECN" as follows:

<Before>
	00b	Reserved
	01b	L0s Supported
	10b	Reserved
	11b	L0s and L1 Supported

<After>
	00b	No ASPM Support
	01b	L0s Supported
	10b	L1 Supported
	11b	L0s and L1 Supported

Current linux ASPM driver doesn't enable ASPM if the support field is
00b or 10b. So there is no impact about 00b. But current linux ASPM
driver doesn't enable L1 if the support field is 10b. With this patch,
10b (L1 support) is handled properly.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-17 10:05:16 -07:00
Rafael J. Wysocki
e9d8288871 PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
After commit c82f63e411
(PCI: check saved state before restore) pcie_portdrv_slot_reset()
may not work correctly if dev->error_state is equal to
pci_channel_io_frozen, because dev->state_saved need not be set at
that time.  Fix this issue by setting dev->state_saved before
pci_restore_state() is called in pcie_portdrv_slot_reset().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-14 13:38:55 -07:00
Jesse Barnes
9965976a38 PCI: pcie portdrv: remove unused variable
Remove unused port_data variable left over from the MCH hotplug quirk
cleanup.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-11 08:46:07 -07:00
Eric W. Biederman
0ba379ec0f PCI: Simplify hotplug mch quirk.
There is a very old quirk for the intel E7502 E7320 and E7525 memory
controller hubs that disables usage of msi interrupts on pcie hotplug
bridges of those devices, and disables changing the affinity of irqs.

Today all we have to do to disable msi on a specific device is to set
dev->no_msi, which is much more straightforward than the previous
logic.

The re-running of this fixup after pci hotplug happens below these
devices is totally bogus.  All of the state we change is pure software
state and we don't change the hardware at all.  Which means hotplug on
the lower devices doesn't have a chance to change this state.  So we
can safely remove the special case from the pciehp driver and the pcie
portdriver.

I suspect the special case was someone's expermental debug code that
slipped in. Certainly it isn't mentioned in commit
6fb8880a61510295aece04a542767161f624dffe aka BKrev:
41966101LJ_ogfOU0m2aE6teZfQnuQ where the code first appears.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 14:06:49 -07:00
Hidetoshi Seto
b1c089b7ca PCI: pcie, aer: report all error before recovery
This patch is required not to lost error records by action invoked on
error recovery, such as slot reset etc.

Following sample (real machine + dummy record injected by aer-inject)
shows that record of 28:00.1 could not be retrieved by recovery of 28:00.0:

- Before:

pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801
e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID)
e1000e 0000:28:00.0:   device [8086:1096] error status/mask=00001000/00100000
e1000e 0000:28:00.0:    [12] Poisoned TLP           (First)
e1000e 0000:28:00.0:   TLP Header: 00000000 00000001 00000002 00000003
e1000e 0000:28:00.0: broadcast error_detected message
e1000e 0000:28:00.0: broadcast slot_reset message
e1000e 0000:28:00.0: setting latency timer to 64
e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.1: setting latency timer to 64
e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.0: broadcast resume message
e1000e 0000:28:00.0: AER driver successfully recovered
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

- After:

pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801
e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID)
e1000e 0000:28:00.0:   device [8086:1096] error status/mask=00001000/00100000
e1000e 0000:28:00.0:    [12] Poisoned TLP           (First)
e1000e 0000:28:00.0:   TLP Header: 00000000 00000001 00000002 00000003
e1000e 0000:28:00.1: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2801(Receiver ID)
e1000e 0000:28:00.1:   device [8086:1096] error status/mask=00081000/00100000
e1000e 0000:28:00.1:    [12] Poisoned TLP           (First)
e1000e 0000:28:00.1:    [19] ECRC
e1000e 0000:28:00.1:   TLP Header: 00000000 00000001 00000002 00000003
e1000e 0000:28:00.1:   Error of this Agent(2801) is reported first
e1000e 0000:28:00.0: broadcast error_detected message
e1000e 0000:28:00.0: broadcast slot_reset message
e1000e 0000:28:00.0: setting latency timer to 64
e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.1: setting latency timer to 64
e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.0: broadcast resume message
e1000e 0000:28:00.0: AER driver successfully recovered
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:50:13 -07:00
Hidetoshi Seto
79e4b89be8 PCI: pcie, aer: change error print format
Use dev_printk like format.

Sample (real machine + dummy error injected by aer-inject):

- Before:

+------ PCI-Express Device Error ------+
Error Severity          : Corrected
PCIE Bus Error type     : Data Link Layer
Bad TLP                 :
Receiver ID             : 2800
VendorID=8086h, DeviceID=1096h, Bus=28h, Device=00h, Function=00h
+------ PCI-Express Device Error ------+
Error Severity          : Corrected
PCIE Bus Error type     : Data Link Layer
Bad TLP                 :
Bad DLLP                :
Receiver ID             : 2801
VendorID=8086h, DeviceID=1096h, Bus=28h, Device=00h, Function=01h
Error of this Agent(2801) is reported first

- After:

pcieport-driver 0000:00:02.0: AER: Multiple Corrected error received: id=2801
e1000e 0000:28:00.0: PCIE Bus Error: severity=Corrected, type=Data Link Layer, id=2800(Receiver ID)
e1000e 0000:28:00.0:   device [8086:1096] error status/mask=00000040/00000000
e1000e 0000:28:00.0:    [ 6] Bad TLP
e1000e 0000:28:00.1: PCIE Bus Error: severity=Corrected, type=Data Link Layer, id=2801(Receiver ID)
e1000e 0000:28:00.1:   device [8086:1096] error status/mask=000000c0/00000000
e1000e 0000:28:00.1:    [ 6] Bad TLP
e1000e 0000:28:00.1:    [ 7] Bad DLLP
e1000e 0000:28:00.1:   Error of this Agent(2801) is reported first

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:50:05 -07:00
Hidetoshi Seto
273024ded7 PCI: pcie, aer: flags to bits
Compact struct and codes.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:49:56 -07:00
Hidetoshi Seto
3472a18773 PCI: pcie, aer: remove unused macros
Cleanup.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:49:36 -07:00
Hidetoshi Seto
e7a0d92b19 PCI: pcie, aer: report multiple/first error on a device
Multiple bits might be set in the Uncorrectable Error Status
register.  But aer_print_error_source() only report a error of
the lowest bit set in the error status register.

So print strings for all bits unmasked and set.

And check First Error Pointer to mark the error occured first.
This FEP is not valid when the corresponing bit of the Uncorrectable
Error Status register is not set, or unimplemented or undefined.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:49:26 -07:00
Hidetoshi Seto
0d90c3ac0b PCI: pcie, aer: refer mask state in mask register properly
ERR_{,UN}CORRECTABLE_ERROR_MASK are set of error bits which linux know,
set of PCI_ERR_COR_* and PCI_ERR_UNC_* defined in linux/pci_regs.h.
This masks make aerdrv not to report errors of unknown bit, while aerdrv
have ability to report such undefined errors as "Unknown Error Bit %2d".

OTOH aerdrv_errprint does not have any check of setting in mask register.
So it could report masked wrong error by finding bit in status without
knowing that the bit is masked in the mask register.

This patch changes aerdrv to use mask state in mask register propely
instead of defined/hardcoded ERR_{,UN}CORRECTABLE_ERROR_MASK.
This change prevents aerdrv from reporting masked error, and also enable
reporting unknown errors.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:49:07 -07:00
Hidetoshi Seto
24dbb7beb2 PCI: pcie, aer: remove spinlock in aerdrv_errprint.c
The static buffer errmsg_buff[] is used only for building error
message in fixed format, and is protected by a spinlock.

This patch removes this buffer and the spinlock.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:48:19 -07:00
Hidetoshi Seto
0d465f2350 PCI: pcie, aer: fix report of multiple errors
The flag AER_MULTI_ERROR_VALID_FLAG in info->flag does mean that the
root port receives multiple error messages.  Error messages can be
posted from different devices, so it does not mean that each reported
device has multiple errors.

If there are multiple error devices and the root port has valid error
source ID, it would be nice to report which device is the error source
reported first.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:47:46 -07:00
Hidetoshi Seto
1b4ffcf843 PCI: pcie, aer: init struct aer_err_info for reuse
In case of multiple errors, struct aer_err_info would be reused among
all reported devices.  So the info->status should be initialized before
recycled.  Otherwise error of one device might be reported as the error
of another device.  Also info->flags has similar problem on reporting
TLP header.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:47:32 -07:00
Hidetoshi Seto
f158575696 PCI: pcie, aer: rework MASK macros in aerdrv_errprint.c
Definitions of MASK macros in aerdrv_errprint.c are tricky and unsafe.

For example, AER_AGENT_TRANSMITTER_MASK(_sev, _stat) does work like:
  static inline func(int _sev, int _stat)
  {
    if (_sev == AER_CORRECTABLE)
      return (_stat & (PCI_ERR_COR_REP_ROLL|PCI_ERR_COR_REP_TIMER));
    else
      return (_stat & PCI_ERR_COR_REP_ROLL);
  }
In case of else path here, for uncorrectable errors, testing bits in
_stat by PCI_ERR_COR_* does not make sense because _stat should have only
PCI_ERR_UNC_* bits originated in uncorrectable error status register.
But at this time this is safe because uncorrectable error using bit
position same to PCI_ERR_COR_REP_ROLL(= bit position 8) is not defined.
Likewise, AER_AGENT_COMPLETER_MASK is always PCI_ERR_UNC_COMP_ABORT but
it works because bit 15 of correctable error status is not defined.

It means that these MASK macros will turn to be wrong once if new error
is defined. (In fact, bit 15 of correctable is now defined in PCIe 2.1)

This patch changes these MASK macros to be more strict, not to return
PCI_ERR_COR_* bits for uncorrectable error status and vise versa.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:47:16 -07:00
Hidetoshi Seto
bd8fedd045 PCI: pcie, aer: AER_PR for printing in aerdrv_errprint.c
Add workaround macro to reduce the number of checkpatch warning:
 WARNING: printk() should include KERN_ facility level

Before:
  total: 0 errors, 10 warnings, 247 lines checked
After:
  total: 0 errors, 1 warnings, 243 lines checked

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:46:54 -07:00