Commit graph

431 commits

Author SHA1 Message Date
Nicolas Pitre
3fd9825c42 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
In the non highmem case, if two memory banks of 1GB each are provided,
the second bank would evade suppression since its virtual base would
be 0.  Fix this by disallowing any memory bank which virtual base
address is found to be lower than PAGE_OFFSET.

Reported-by: Lennert Buytenhek <buytenh@marvell.com>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 09:49:45 +00:00
Nicolas Pitre
08e445bd6a [ARM] 5366/1: fix shared memory coherency with VIVT L1 + L2 caches
When there are multiple L1-aliasing userland mappings of the same physical
page, we currently remap each of them uncached, to prevent VIVT cache
aliasing issues. (E.g. writes to one of the mappings not being immediately
visible via another mapping.)  However, when we do this remapping, there
could still be stale data in the L2 cache, and an uncached mapping might
bypass L2 and go straight to RAM.  This would cause reads from such
mappings to see old data (until the dirty L2 line is eventually evicted.)

This issue is solved by forcing a L2 cache flush whenever the shared page
is made L1 uncacheable.

Ideally, we would make L1 uncacheable and L2 cacheable as L2 is PIPT. But
Feroceon does not support that combination, and the TEX=5 C=0 B=0 encoding
for XSc3 doesn't appear to work in practice.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-28 16:55:00 +00:00
Russell King
24f11ec001 [ARM] fix section-based ioremap
Tomi Valkeinen reports:
  Running with latest linux-omap kernel on OMAP3 SDP board, I have
  problem with iounmap(). It looks like iounmap() does not properly
  free large areas. Below is a test which fails for me in 6-7 loops.

	for (i = 0; i < 200; ++i) {
		vaddr = ioremap(paddr, size);
		if (!vaddr) {
			printk("couldn't ioremap\n");
			break;
		}
		iounmap(vaddr);
	}

The changes to vmalloc.c weren't reflected in the ARM ioremap
implementation.  Turns out the fix is rather simple.

Tested-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Tested-by: Matt Gerassimoff <mgeras@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-25 17:36:34 +00:00
Russell King
7dd8c4f352 [ARM] fix StrongARM-11x0 page copy implementation
Which had the 'from' and 'to' pages reversed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-24 11:41:17 +00:00
Nicolas Pitre
98007c230e [ARM] 5364/1: allow flush_ioremap_region() to be used from modules
Without this, the pxa2xx-flash driver cannot be used as a module.

Reported-by: Chris Lawrence <chrisdl@netspace.net.au>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-12 13:51:03 +00:00
David Howells
9c93af1ede NOMMU: Rename ARM's struct vm_region
Rename ARM's struct vm_region so that I can introduce my own global version
for NOMMU.  It's feasible that the ARM version may wish to use my global one
instead.

The NOMMU vm_region struct defines areas of the physical memory map that are
under mmap.  This may include chunks of RAM or regions of memory mapped
devices, such as flash.  It is also used to retain copies of file content so
that shareable private memory mappings of files can be made.  As such, it may
be compatible with what is described in the banner comment for ARM's vm_region
struct.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-01-08 12:04:47 +00:00
Russell King
c613bbba6f Merge branch 'mxc-pu-imxfb' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6 into devel 2008-12-17 20:04:45 +00:00
Russell King
7e1548a597 Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2008-12-15 22:13:26 +00:00
Russell King
67306da610 [ARM] Ensure linux/hardirqs.h is included where required
... for the removal of it from asm-generic/local.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-15 10:34:48 +00:00
Julia Lawall
6ce1b871db [ARM] eliminate NULL test and memset after alloc_bootmem
As noted by Akinobu Mita in patch b1fceac2b9,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:03 +00:00
Russell King
baa745a337 [ARM] Fix alignment fault handling for ARMv6 and later CPUs
On ARMv6 and later CPUs, it is possible for userspace processes to
get stuck on a misaligned load or store due to the "ignore fault"
setting; unlike previous CPUs, retrying the instruction without
the 'A' bit set does not always cause the load to succeed.

We have no real option but to default to fixing up alignment faults
on these CPUs, and having the CPU fix up those misaligned accesses
which it can.

Reported-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-07 09:44:55 +00:00
Russell King
c5b84b3bb0 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
Conflicts:

	arch/arm/mach-pxa/pxa25x.c
2008-12-02 22:07:40 +00:00
Eric Miao
59c7bcd4d6 [ARM] pxa: add base PXA935 support due to CPUID change
PXA935 has changed its implementor ID from Intel to Marvell, this
patch modifies arch/arm/boot/compressed/head.S and proc-xsc3.S to
support a smooth bootup.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:42:40 +08:00
Russell King
657e1de8e7 Merge branch 'for-rmk-realview' of git://linux-arm.org/linux-2.6 into devel 2008-12-01 17:53:45 +00:00
Jon Callan
4c3ea37171 RealView: Add Cortex-A9 support to the EB board
This patch adds the necessary definitions and Kconfig entries to enable
Cortex-A9 (ARMv7 SMP) tiles on the RealView/EB board.

Signed-off-by: Jon Callan <Jon.Callan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:56 +00:00
Russell King
37efe6427d [ARM] use asm/sections.h
Update to use the asm/sections.h header rather than declaring these
symbols ourselves.  Change __data_start to _data to conform with the
naming found within asm/sections.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01 11:53:07 +00:00
Russell King
87c52578bd [ARM] Remove linux/sched.h from asm/cacheflush.h and asm/uaccess.h
... and fix those drivers that were incorrectly relying upon
that include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29 18:49:55 +00:00
Russell King
5bed1fb328 [ARM] Remove unnecessary mach/hardware.h includes in arch/arm/mm
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 23:20:39 +00:00
Russell King
7ef4de17cc Merge branch 'highmem' into devel
Conflicts:

	arch/arm/mach-clps7500/include/mach/memory.h
2008-11-28 15:39:02 +00:00
Nicolas Pitre
252d4c276d [ARM] remove bogus #ifdef CONFIG_HIGHMEM in show_pte()
The restriction on !CONFIG_HIGHMEM is unneeded since page tables are
currently never allocated with highmem pages, and actually disable PTE
dump whenever highmem is configured.  Let's have a dynamic test to better
describe the current limitation instead.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:47 +00:00
Nicolas Pitre
9210807cb5 [ARM] prevent the vmalloc cmdline argument from eating all memory
Commit 8d5796d2ec allows for the vmalloc
area to be resized from the kernel cmdline.  Make sure it cannot overlap
with RAM entirely.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:47 +00:00
Nicolas Pitre
6db015e49c [ARM] mem_init() cleanups
Make free_area() arguments pfn based, and return number of freed pages.
This will simplify highmem initialization later.

Also, codepages, datapages and initpages are actually codesize, datasize
and initsize.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:46 +00:00
Nicolas Pitre
a1bbaec0cd [ARM] split highmem into its own memory bank
Doing so will greatly simplify the bootmem initialization code as each
bank is therefore entirely lowmem or highmem with no crossing between
those zones.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:45 +00:00
Nicolas Pitre
4b5f32cee0 [ARM] rationalize memory configuration code some more
Currently there are two instances of struct meminfo: one in
kernel/setup.c marked __initdata, and another in mm/init.c with
permanent storage.  Let's keep only the later to directly populate
the permanent version from arm_add_memory().

Also move common validation tests between the MMU and non-MMU cases
into arm_add_memory() to remove some duplication.  Protection against
overflowing the membank array is also moved in there in order to cover
the kernel cmdline parsing path as well.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:44 +00:00
Nicolas Pitre
43ae286b7d [ARM] fix a couple clear_user_highpage assembly constraints
In all cases the kaddr is assigned an input register even though it is
modified in the assembly code.  Let's assign a new variable to the
modified value and mark those inline asm with volatile otherwise they
get optimized away because the output variable is otherwise not used.

Also fix a few conversion errors in copypage-feroceon.c and
copypage-v4mc.c.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:43 +00:00
Russell King
303c644365 [ARM] clearpage: provide our own clear_user_highpage()
For similar reasons as copy_user_page(), we want to avoid the
additional kmap_atomic if it's unnecessary.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 23:53:48 +00:00
Russell King
063b0a4207 [ARM] copypage: provide our own copy_user_highpage()
We used to override the copy_user_page() function.  However, this
is not only inefficient, it also causes additional complexity for
highmem support, since we convert from a struct page to a kernel
direct mapped address and back to a struct page again.

Moreover, with highmem support, we end up pointlessly setting up
kmap entries for pages which we're going to remap.  So, push the
kmapping down into the copypage implementation files where it's
required.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 23:53:47 +00:00
Russell King
d73e60b714 [ARM] copypage: convert assembly files to C
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 23:53:46 +00:00
Russell King
f412b09f4e Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into devel 2008-11-27 12:42:48 +00:00
Russell King
c750815e2d [ARM] Arrange for platforms to select appropriate CPU support
Rather than:

	config CPU_BLAH
		bool
		depends on ARCH_FOO || MACH_BAR
		default y if ARCH_FOO || MACH_BAR

arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly.

Acked-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Brian Swetland <swetland@google.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:38:00 +00:00
Russell King
59f0cb0fdd [ARM] remove memzero()
As suggested by Andrew Morton, remove memzero() - it's not supported
on other architectures so use of it is a potential build breaking bug.
Since the compiler optimizes memset(x,0,n) to __memzero() perfectly
well, we don't miss out on the underlying benefits of memzero().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:37:59 +00:00
Catalin Marinas
8553cb67d2 Modern processors may need to drain the WB before WFI
Since WFI may cause the processor to enter a low-power mode, data may
still be in the write buffer. This patch adds a DSB (or DWB) to the
cpu_(v6|v7)_do_idle functions before the WFI.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-10 14:14:11 +00:00
Russell King
ebb4c65869 [ARM] iop: iop3xx needs registers mapped uncached+unbuffered
Mikael Pettersson reported:

   The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0
   (the first ethernet port) on my Thecus n2100 XScale box.

   There is however still a strange "ghost" device that gets partially
   detected in 2.6.28-rc2 vanilla.

The IOP321 manual says:

  The user designates the memory region containing the OCCDR as
  non-cacheable and non-bufferable from the IntelR XScaleTM core.
  This guarantees that all load/stores to the OCCDR are only of
  DWORD quantities.

Ensure that the OCCDR is so mapped.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-09 11:18:36 +00:00
Nicolas Pitre
72bc2b1ad6 [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range
Same fix as commit c7cf72dcad: when 'start' and 'end' are less than a
cacheline apart and 'start' is unaligned we are done after cleaning and
invalidating the first cacheline.

Cc: <stable@kernel.org>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-08 23:08:54 +00:00
Russell King
878708f290 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop 2008-11-06 18:04:23 +00:00
Dan Williams
c7cf72dcad [ARM] xsc3: fix xsc3_l2_inv_range
When 'start' and 'end' are less than a cacheline apart and 'start' is
unaligned we are done after cleaning and invalidating the first
cacheline.  So check for (start < end) which will not walk off into
invalid address ranges when (start > end).

This issue was caught by drivers/dma/dmatest.

2.6.27 is susceptible.

Cc: <stable@kernel.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de>
Cc: Lennert Buytenhek <buytenh@marvell.com>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-06 10:48:29 -07:00
Russell King
b1cce6b1b2 [ARM] mm: fix page table initialization
As a result of the ptebits changes, we ended up marking device mappings
as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with
serial ports and the like.  While reviewing the section mapping table
entries, other errors in the memory type settings for devices were
detected and confirmed to prevent Xscale3 platforms booting.

Tested on:
	OMAP34xx (ARMv7),
	OMAP24xx (ARMv6),
	OMAP16xx (ARM926T, ARMv5),
	PXA311 (Xscale3),
	PXA272 (Xscale),
	PXA255 (Xscale),
	IXP42x (Xscale),
	S3C2410 (ARM920T, ARMv4T),
	ARM720T (ARMv4T)
	StrongARM-110 (ARMv4)

Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Mike Rapoport <mike@compulab.co.il>
Tested-by: Ben Dooks <ben-linux@fluff.org>
Tested-by: Anders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06 17:45:32 +00:00
Russell King
ab4f2ee130 [ARM] fix naming of MODULE_START / MODULE_END
As of 73bdf0a60e, the kernel needs
to know where modules are located in the virtual address space.
On ARM, we located this region between MODULE_START and MODULE_END.
Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END.
Update ARM to use the same naming, so is_vmalloc_or_module_addr()
can work properly.  Also update the comment on mm/vmalloc.c to
reflect that ARM also places modules in a separate region from the
vmalloc space.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06 17:13:47 +00:00
Jon Callan
73b63efaac ARMv7: Add SMP initialisation to proc-v7.S
This patch adds the SMP/nAMP mode setting to __v7_setup and also sets
TTBR to shared page table walks if SMP is enabled. The PTWs are also
marked inner cacheable for both SMP and UP modes (setting this is fine
even if the CPU doesn't support the feature).

Signed-off-by: Jon Callan <Jon.Callan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-06 13:23:09 +00:00
Catalin Marinas
6b07d7fea0 ARMv7: Do not set TTBR0 in __v7_setup
This register is set in __enable_mmu in the head.S file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-06 13:23:08 +00:00
Catalin Marinas
c30c2f99e1 ARMv7: Add extra barriers for flush_cache_all compressed/head.S
The flush_cache_all function on ARMv7 is implemented as a series of
cache operations by set/way. These are not guaranteed to be ordered with
previous memory accesses, requiring a DMB. This patch also adds barriers
for the TLB operations in compressed/head.S

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-06 13:23:07 +00:00
Dan Williams
6bee00dbbc [ARM] xsc3: revert writethrough memory-type encoding change
Commit 40df2d1d "[ARM] Update Xscale and Xscale3 PTE mappings" was
fingered by git-bisect for a boot failure on iop13xx.  The change made
L_PTE_MT_WRITETHROUGH mappings L2-uncacheable.  Russell points out that
this mapping is used for the vector page.  Given the regression, and the
fact this page is used often, restore the old behaviour.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-10-24 10:21:45 -07:00
Catalin Marinas
f80a3bb252 [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S
A typo caused these values to be swapped leading to incorrect memory
type attributes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-22 19:40:21 +01:00
Russell King
f20e3b5fe7 Merge branch 'for-rmk' of git://git.android.com/kernel into devel 2008-10-22 19:34:09 +01:00
Brian Swetland
1637de0c9b [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM
The MSM architecture covers a wider family of chips than just the MSM7X00A.
Move to a more generic name, in perparation for supporting the specific
SoC variants as sub-architectures (ARCH_MSM7X01A, ARCH_MSM722X, etc).  This
gives us ARCH_MSM for the (many) common peripherals.

This also removes the unused/obsolete config item MSM7X00A_IDLE.

Signed-off-by: Brian Swetland <swetland@google.com>
2008-10-22 02:39:32 -07:00
Anders Grafström
e4d2a5985a [ARM] 5310/1: Fix cache flush functions for ARMv4
ARMv4 (ARM720T) cache flush functions are broken in 2.6.19+ kernels.
The issue was introduced by commit f12d0d7c77
This patch corrects the CPU_CP15 ifdef statements so that they actually
do something.

Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-17 13:44:27 +01:00
Russell King
b6825d2df5 Merge branch 'omap-all' into devel
Conflicts:

	arch/arm/mach-omap2/gpmc.c
	arch/arm/mach-omap2/irq.c
2008-10-14 22:24:42 +01:00
Russell King
6defd90433 Merge branch 'for-rmk' of git://git.marvell.com/orion
Merge branch 'orion-devel' into devel
2008-10-09 21:33:07 +01:00
Russell King
6a4690c22f Merge branch 'ptebits' into devel
Conflicts:

	arch/arm/Kconfig
2008-10-09 21:31:56 +01:00
Syed Mohammed, Khasim
2885f00049 ARM: OMAP3: Add minimal Beagle board support
Add minimal Beagle board support. Based on earlier patches
by Syed Mohammed Khasim with some fixes from linux-omap tree.

Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09 17:51:42 +03:00