Commit graph

29 commits

Author SHA1 Message Date
Peter Korsgaard
b7d66c88c9 powerpc/mpc83xx: Fix usb mux setup for mpc834x
usb0 and usb1 mux settings in the sicrl register were swapped (twice!)
in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci
and full speed devices.

The USB port config on mpc834x is done using 2 muxes: Port 0 is always
used for MPH port 0, and port 1 can either be used for MPH port 1 or DR
(unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM
figure 1-4..

mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit
positions of the usb0 / usb1 mux settings swapped. It would basically
work if you specified port1 instead of port0 for the MPH controller (and
happened to use ULPI phys), which is what all the 834x dts have done,
even though that configuration is physically invalid.

Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:31 -05:00
Kumar Gala
28eac2b74c powerpc/fsl: Remove cell-index from PCI nodes
The cell-index property isn't used on PCI nodes and is ill defined.
Remove it for now and if someone comes up with a good reason and
consistent definition for it we can add it back

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:14 -05:00
Anton Vorontsov
70b3adbba0 powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:04 -05:00
Andy Fleming
b31a1d8b41 gianfar: Convert gianfar to an of_platform_driver
Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method.  The old way used fields in einfo, which no longer
exists.  The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:29:15 -08:00
Anton Vorontsov
fd657efc67 powerpc: Remove device_type = "board_control" properties in .dts files
We don't want to encourage the bogus device_type usage.

The device type isn't used in the code, so we can simply remove it from
the documentation and dts files.

Boards should specify proper compatible entries instead.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-20 23:33:04 -05:00
John Rigby
5b70a09705 powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.
Modify mpc83xx_add_bridge to get config space register base address from
the device tree instead of immr + hardcoded offset.

83xx pci nodes have this change:
    register properties now contain two address length tuples:
	First is the pci bridge register base, this has always been there.
	Second is the config base, this is new.

This is documented in dts-bindings/fsl/83xx-512x-pci.txt

The changes accomplish these things:
    mpc83xx_add_bridge no longer needs to call get_immrbase
    it uses hard coded addresses if the second register value is missing

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:58 -05:00
Kumar Gala
aeb42762b8 powerpc/83xx: Add missing cell-index to dma-channel device nodes
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23 22:05:10 -05:00
Kim Phillips
cf0d19fb30 powerpc/fsl: proliferate simple-bus compatibility to soc nodes
add simple-bus compatible property to soc nodes for 83xx/85xx platforms
that were missing them.  Add same to platform probe code.

This fixes SoC device drivers (such as talitos) to succeed in matching
devices present in the soc node.

also update mpc836x_rdk dts to new SEC bindings (overlooked in commit
3fd4473: powerpc/fsl: update crypto node definition and device tree
instances).

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-29 17:48:35 -05:00
Kim Phillips
3fd44736db powerpc/fsl: update crypto node definition and device tree instances
delete obsolete device-type property, delete model property
(use compatible property instead), prepend "fsl," to Freescale
specific properties. Add nodes to device trees that are missing them,
and fix broken property values in other trees.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 07:55:47 -05:00
Kumar Gala
dee805532a powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
Added DMA nodes for the elo/elo-plus DMA engines.

Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that
its the same as all the other boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-27 16:04:29 -05:00
Kim Phillips
b277b02588 [POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dts
According to the 8349EA ref man, the second PCI PHB IRQ is 67.  Thanks to Peter
Van Ackeren for finding this.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:29:45 -06:00
Paul Gortmaker
cda13dd164 [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.

The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e.  the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.

The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.

I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 16:16:38 -06:00
Anton Vorontsov
f3a2b29d93 [POWERPC] fsl_spi: stop using device_type = "spi"
Also:
- rename "fsl_spi" to "fsl,spi";
- add and use cell-index property, if found;
- split probing code out of fsl_spi_init, thus we can call
  it for legacy device_type probing and new "compatible" probing.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:32:58 -06:00
Paul Gortmaker
eedd62ed53 [POWERPC] 83xx: mpc834x_mds - Convert device tree source to dts-v1
Move mpc834x_mds device tree source forward to dts-v1 format.  Nothing
too complex in this one, so it boils down to just adding a bunch of 0x
in the right places and converting clock speeds to decimal.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:32:44 -06:00
Li Yang
866b6ddd28 [POWERPC] 83xx: USB device tree cleanups
Remove device_type = "usb" for 83xx SoC USB controller

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:33:05 -06:00
Kumar Gala
ea082fa94e [POWERPC] FSL: Added aliases node to device trees
Added aliases nodes for kurobox, 83xx, 85xx, and 86xx platforms.
This included added labels and cell-index properties for serial and
pci nodes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-12 01:51:03 -06:00
Kumar Gala
e77b28eb19 [POWERPC] FSL: enet device tree cleanups
* Removed address fields in ethernet nodes
* Removed #address-cells, #size-cells from gianfar nodes
* Added cell-index to gianfar and ucc ethernet nodes
* Added enet[0..3] labels
* Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio"
* Removed device_type = "mdio"

The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo
but it is now considered deprecated.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-12 01:50:45 -06:00
Kumar Gala
ec9686c4a5 [POWERPC] FSL: I2C device tree cleanups
* Removed device_type = "i2c"
* Added missing second I2C controller on MPC8548 CDS, MPC8544 DS
* Added #address-cells, #size-cells, and cell-index where missing

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 23:17:24 -06:00
Kim Phillips
27f49807d7 [POWERPC] 8xxx: MDS board RTC fixes
Now the rtc class ds1374 driver has been added, remove the old rtc
driver hookup code, add rtc node to device trees, and turn on the
new driver in the defconfigs.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20 15:39:54 -06:00
Peter Korsgaard
33799e3379 [POWERPC] spi: Use fsl_spi instead of mpc83xx_spi
According to booting-without-of.txt, compatible should be "fsl_spi" and
mode "cpu" or "qe" for the fsl SPI controllers.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:17 -05:00
Grant Likely
ad25a4cca7 [POWERPC] mpc8349: Add linux,network-index to ethernet nodes in device tree
cuImage needs to know the logical index of the ethernet devices in order
to assign mac addresses.  This adds the needed properties.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
CC: Scott Wood <scottwood@freescale.com>
CC: Kumar Gala <galak@kernel.crashing.org>
CC: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:22 +10:00
Kumar Gala
1b3c5cdab4 [POWERPC] Move PCI nodes to be sibilings with SOC nodes
Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:22 -05:00
Kumar Gala
f0c8ac8083 [POWERPC] DTS cleanup
Removed the following cruft from .dts files:
* 32-bit in cpu node -- doesn't exist in any spec and not used by kernel
* removed built-in (chrp legacy)
* Removed #interrupt-cells in places they don't need to be set
* Fixed ranges on lite5200*
* Removed clock-frequency from i8259 pic node, not sure where this came from
* Removed big-endian from i8259 pic nodes, this was just bogus

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:16 -05:00
Roy Zang
344ffde71e [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
Updated the 83xx & 85xx device tree PCI related compartible property.

Used the following compatible properties:
	PCI     "fsl,mpc8349-pci"
	PCI     "fsl,mpc8540-pci"
	PCI-X:  "fsl,mpc8540-pcix"
	PCIe:   "fsl,mpc8548-pcie"

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Timur Tabi
eae98266e7 [POWERPC] Fix MAC address entries for 83xx, 85xx, and 86xx device trees
For the 83xx, 85xx, and 86xx device trees, add a "local-mac-address" property
to every Ethernet node that didn't have one.  Add a comment indicating that
the "address" and/or "mac-address" properties are deprecated in DTS files
and will be removed at a later time.  Change all MAC address properties to
have a zero MAC address value.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-03 02:05:41 -05:00
Scott Wood
3fae4210ba [POWERPC] 83xx: Fix the PCI ranges in the MPC834x_MDS device tree.
The MPC834x_MDS device tree's PCI non-prefetchable MMIO range was
specified incorrectly.  Both the local and bus addresses start at
0x90000000.
    
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:07:52 -05:00
Stuart Yoder
500798d48f [POWERPC] Remove unused, undocumented #cpus property from cpus node
The #cpus property is unused and undocumented and is therefore
being removed.

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-09 15:03:24 +11:00
Kumar Gala
d71a1dc62b [POWERPC] 83xx: Cleaned up 83xx platform dts files
* Fixed up top level compatible property for all boards
* Removed explicit linux,phandle usage. Use references and labels now
* Fixed interrupt sense attribute, some interrupts were marked edge, that are level

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-16 10:10:52 -06:00
Kumar Gala
49baa91d68 [POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDS
The MPC834x SYS board has always been called the MPC834x MDS since its public
release.  Removed all references to SYS and replaced with MDS.  Additionally
renamed the .dts to match the defconfig (mpc834x_mds*).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-09 11:39:46 -06:00
Renamed from arch/powerpc/boot/dts/mpc8349emds.dts (Browse further)