Commit graph

23 commits

Author SHA1 Message Date
Joerg Roedel
fffcda1183 x86, gart: Rename pci-gart_64.c to amd_gart_64.c
This file only contains code relevant for the northbridge
gart in AMD processors. This patch renames the file to
represent this fact in the filename.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-05-10 17:22:06 +02:00
Olaf Hering
d404ab0a11 move x86 specific oops=panic to generic code
The oops=panic cmdline option is not x86 specific, move it to generic code.
Update documentation.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:11 -07:00
Lucas De Marchi
a6c3270b04 x86: Fix misspelling and align params
Fix 'upto' misspelling and align parameters.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-2-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-18 10:39:30 +01:00
Christoph Hellwig
7974891db2 x86: Always use irq stacks
IRQ stacks provide much better safety against unexpected stack use from
interrupts, at the minimal downside of slightly higher memory usage.
Enable irq stacks also for the default 8k stack on 32-bit kernels to
minimize the problem of stack overflows through interrupt activity.

This is what the 64-bit kernel and various other architectures already do.

Signed-off-by: Christoph Hellwig <hch@lst.de>
LKML-Reference: <20100628121554.GA6605@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-06-29 12:12:59 +02:00
David Rientjes
ca2107c9d6 x86, numa: Remove configurable node size support for numa emulation
Now that numa=fake=<size>[MG] is implemented, it is possible to remove
configurable node size support.  The command-line parsing was already
broken (numa=fake=*128, for example, would not work) and since fake nodes
are now interleaved over physical nodes, this support is no longer
required.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1002151343080.26927@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-15 14:34:18 -08:00
David Rientjes
8df5bb34de x86, numa: Add fixed node size option for numa emulation
numa=fake=N specifies the number of fake nodes, N, to partition the
system into and then allocates them by interleaving over physical nodes.
This requires knowledge of the system capacity when attempting to
allocate nodes of a certain size: either very large nodes to benchmark
scalability of code that operates on individual nodes, or very small
nodes to find bugs in the VM.

This patch introduces numa=fake=<size>[MG] so it is possible to specify
the size of each node to allocate.  When used, nodes of the size
specified will be allocated and interleaved over the set of physical
nodes.

FAKE_NODE_MIN_SIZE was also moved to the more-appropriate
include/asm/numa_64.h.

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1002151342510.26927@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-15 14:34:10 -08:00
Ingo Molnar
0d5959723e Merge branch 'linus' into x86/mce3
Conflicts:
	arch/x86/kernel/cpu/mcheck/mce_64.c
	arch/x86/kernel/irq.c

Merge reason: Resolve the conflicts above.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 23:31:52 +02:00
Hidetoshi Seto
62fdac5913 x86, mce: Add boot options for corrected errors
This patch introduces three boot options (no_cmci, dont_log_ce
and ignore_ce) to control handling for corrected errors.

The "mce=no_cmci" boot option disables the CMCI feature.

Since CMCI is a new feature so having boot controls to disable
it will be a help if the hardware is misbehaving.

The "mce=dont_log_ce" boot option disables logging for corrected
errors. All reported corrected errors will be cleared silently.
This option will be useful if you never care about corrected
errors.

The "mce=ignore_ce" boot option disables features for corrected
errors, i.e. polling timer and cmci.  All corrected events are
not cleared and kept in bank MSRs.

Usually this disablement is not recommended, however it will be
a help if there are some conflict with the BIOS or hardware
monitoring applications etc., that clears corrected events in
banks instead of OS.

[ And trivial cleanup (space -> tab) for doc is included. ]

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4A30ACDF.5030408@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 11:42:18 +02:00
Andi Kleen
3c0797925f x86, mce: switch x86 machine check handler to Monarch election.
On Intel platforms machine check exceptions are always broadcast to
all CPUs.  This patch makes the machine check handler synchronize all
these machine checks, elect a Monarch to handle the event and collect
the worst event from all CPUs and then process it first.

This has some advantages:

- When there is a truly data corrupting error the system panics as
  quickly as possible. This improves containment of corrupted
  data and makes sure the corrupted data never hits stable storage.

- The panics are synchronized and do not reenter the panic code
  on multiple CPUs (which currently does not handle this well).

- All the errors are reported. Currently it often happens that
  another CPU happens to do the panic first, but reports useless
  information (empty machine check) because the real error
  happened on another CPU which came in later.
  This is a big advantage on Nehalem where the 8 threads per CPU
  lead to often the wrong CPU winning the race and dumping
  useless information on a machine check.  The problem also occurs
  in a less severe form on older CPUs.

- The system can detect when no CPUs detected a machine check
  and shut down the system.  This can happen when one CPU is so
  badly hung that that it cannot process a machine check anymore
  or when some external agent wants to stop the system by
  asserting the machine check pin.  This follows Intel hardware
  recommendations.

- This matches the recommended error model by the CPU designers.

- The events can be output in true severity order

- When a panic happens on another CPU it makes sure to be actually
  be able to process the stop IPI by enabling interrupts.

The code is extremly careful to handle timeouts while waiting
for other CPUs. It can't rely on the normal timing mechanisms
(jiffies, ktime_get) because of its asynchronous/lockless nature,
so it uses own timeouts using ndelay() and a "SPINUNIT"

The timeout is configurable. By default it waits for upto one
second for the other CPUs.  This can be also disabled.

From some informal testing AMD systems do not see to broadcast
machine checks, so right now it's always disabled by default on
non Intel CPUs or also on very old Intel systems.

Includes fixes from Ying Huang
Fixed a "ecception" in a comment (H.Seto)
Moved global_nwo reset later based on suggestion from H.Seto
v2: Avoid duplicate messages

[ Impact: feature, fixes long standing problems. ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-03 14:45:12 -07:00
Andi Kleen
8780e8e0f6 x86, mce: improve documentation
Document that check_interval set to 0 means no polling.
Noticed by Hidetoshi Seto

Also add a reference from boot options to the sysfs tunables

Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-28 09:24:15 -07:00
Yinghai Lu
888a589f6b mm, x86: remove MEMORY_HOTPLUG_RESERVE related code
after:

 | commit b263295dbf
 | Author: Christoph Lameter <clameter@sgi.com>
 | Date:   Wed Jan 30 13:30:47 2008 +0100
 |
 |    x86: 64-bit, make sparsemem vmemmap the only memory model

we don't have MEMORY_HOTPLUG_RESERVE anymore.

Historically, x86-64 had an architecture-specific method for memory hotplug
whereby it scanned the SRAT for physical memory ranges that could be
potentially used for memory hot-add later. By reserving those ranges
without physical memory, the memmap would be allocated and left dormant
until needed. This depended on the DISCONTIG memory model which has been
removed so the code implementing HOTPLUG_RESERVE is now dead.

This patch removes the dead code used by MEMORY_HOTPLUG_RESERVE.

(Changelog authored by Mel.)

v2: updated changelog, and remove hotadd= in doc

[ Impact: remove dead code ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Workflow-found-OK-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A0C4910.7090508@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 09:13:31 +02:00
H. Peter Anvin
2feceeff1e x86: fix typo in address space documentation
Fix a trivial typo in Documentation/x86/x86_64/mm.txt.

[ Impact: documentation only ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Rik van Riel <riel@redhat.com>
2009-05-05 19:10:18 -07:00
Rik van Riel
c898faf91b x86: 46 bit physical address support on 64 bits
Extend the maximum addressable memory on x86-64 from 2^44 to
2^46 bytes. This requires some shuffling around of the vmalloc
and virtual memmap memory areas, to keep them away from the
direct mapping of up to 64TB of physical memory.

This patch also introduces a guard hole between the vmalloc
area and the virtual memory map space.  There's really no
good reason why we wouldn't have a guard hole there.

[ Impact: future hardware enablement ]

Signed-off-by: Rik van Riel <riel@redhat.com>
LKML-Reference: <20090505172856.6820db22@cuia.bos.redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-05 19:10:18 -07:00
Thadeu Lima de Souza Cascardo
21acb9caa2 trivial: fix where cgroup documentation is not correctly referred to
cgroup documentation was moved to Documentation/cgroups/. There are some
places that still refer to Documentation/controllers/,
Documentation/cgroups.txt and Documentation/cpusets.txt. Fix those.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:02 +02:00
Ingo Molnar
fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Ingo Molnar
78f902ccc5 Merge commit 'v2.6.28-rc8' into x86/doc 2008-12-16 22:04:48 +01:00
Jiri Slaby
a4c52791fa x86, 64-bit: update address space documentation
Impact: documentation update

Commit a6523748bd
(paravirt/x86, 64-bit: move __PAGE_OFFSET to leave a space for hypervisor)
changed address space without changing the documentation.

Change it according to the code change -- direct mapping start:
ffff810000000000 => ffff880000000000 which gives 57 TiB, something
between 45 and 46 bits.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 19:30:28 +01:00
Cyrill Gorcunov
5b9a0e14eb x86: nmi - nmi_watchdog boot param docs cleanup
Impact: documentation update

1) nmi_watchdog boot parameter is common to 32/64 bit modes. So
   move it from Documentation/x86/x86_64/boot-options.txt to
   Documentation/kernel-parameters.txt and integrate with.

2) Also fix [panic] keyword placement -- it ought to be at first
   position otherwise it will not be recognized.

3) Document lapic and ioapic keywords.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03 09:17:39 +01:00
Uwe Hermann
71cced6eb0 doc/x86: fix doc subdirs
The Documentation/i386 and Documentation/x86_64 directories and their
contents have been moved into Documentation/x86. Fix references to
those files accordingly.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28 16:36:42 +01:00
Luiz Fernando N. Capitulino
1befdefcf4 x86: remove 8254 timer texts from Documentation
Commit ecd29476ae removed the
"disable_8254_timer" and "enable_8254_timer" kernel parameters from
the kernel but did not remove the references to them from two
files in the Documentation directory: kernel-parameters.txt and
x86/x86_64/boot-options.txt.

This change completes the removal.

Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 18:20:14 +02:00
Paul Jackson
200001eb14 x86 boot: only pick up additional EFI memmap if add_efi_memmap flag
Applies on top of the previous patch:
  x86 boot: add code to add BIOS provided EFI memory entries to kernel

Instead of always adding EFI memory map entries (if present) to the
memory map after initially finding either E820 BIOS memory map entries
and/or kernel command line memmap entries, -instead- only add such
additional EFI memory map entries if the kernel boot option:

    add_efi_memmap

is specified.

Requiring this 'add_efi_memmap' option is backward compatible with
kernels that didn't load such additional EFI memory map entries in
the first place, and it doesn't override a configuration that tries
to replace all E820 or EFI BIOS memory map entries with ones given
entirely on the kernel command line.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:10:41 +02:00
Ingo Molnar
3c1ca43faf Merge branch 'x86/setup' into x86/devel 2008-07-08 09:43:01 +02:00
H. Peter Anvin
23deb06821 x86: move x86-specific documentation into Documentation/x86
The current organization of the x86 documentation makes it appear as
if the "i386" documentation doesn't apply to x86-64, which is does.
Thus, move that documentation into Documentation/x86, and move the
x86-64-specific stuff into Documentation/x86/x86_64 with the eventual
goal to move stuff that isn't actually 64-bit specific back into
Documentation/x86.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-30 17:19:03 -07:00