If a client sets an owner (or group_owner or acl) attribute on open for
create, and the mapping of that owner to an id fails, then we return
BAD_OWNER. But BAD_OWNER is a seqid-mutating error, so we can't
shortcut the open processing that case: we have to at least look up the
owner so we can find the seqid to bump.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This BUG_ON just crashes the thread a little earlier than it would
otherwise--it doesn't seem useful.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We've now increased the size of the duplicate reply cache by quite a
bit, but the number of hash buckets has not changed. So, we've gone from
an average hash chain length of 16 in the old code to 4096 when the
cache is its largest. Change the code to scale out the number of buckets
with the max size of the cache.
At the same time, we also need to fix the hash function since the
existing one isn't really suitable when there are more than 256 buckets.
Move instead to use the stock hash_32 function for this. Testing on a
machine that had 2048 buckets showed that this gave a smaller
longest:average ratio than the existing hash function:
The formula here is longest hash bucket searched divided by average
number of entries per bucket at the time that we saw that longest
bucket:
old hash: 68/(39258/2048) == 3.547404
hash_32: 45/(33773/2048) == 2.728807
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The typical case with the DRC is a cache miss, so if we keep track of
the max number of entries that we've ever walked over in a search, then
we should have a reasonable estimate of the longest hash chain that
we've ever seen.
With that, we'll also keep track of the total size of the cache when we
see the longest chain. In the case of a tie, we prefer to track the
smallest total cache size in order to properly gauge the worst-case
ratio of max vs. avg chain length.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For presenting statistics relating to duplicate reply cache.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Break out the function that compares the rqstp and checksum against a
reply cache entry. While we're at it, track the efficacy of the checksum
over the NFS data by tracking the cases where we would have incorrectly
matched a DRC entry if we had not tracked it or the length.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The most common case is to do a search of the cache, followed by an
insert. In the case where we have to allocate an entry off the slab,
then we end up having to redo the search, which is wasteful.
Better optimize the code for the common case by eliminating the initial
search of the cache and always preallocating an entry. In the case of a
cache hit, we'll end up just freeing that entry but that's preferable to
an extra search.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up. This matches a similar API for the client side, and
keeps ULP fingers out the of the GSS mech switch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since we only enforce an upper bound, not a lower bound, a "negative"
length can get through here.
The symptom seen was a warning when we attempt to a kmalloc with an
excessive size.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
vfs_writev() updates the offset argument - but the code then passes the
offset to vfs_fsync_range(). Since offset now points to the offset after
what was just written, this is probably not what was intended
Introduced by face15025f "nfsd: use
vfs_fsync_range(), not O_SYNC, for stable writes".
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we end up doing "goto out_nomem" in this function, we'll call
nfsd_reply_cache_shutdown. That will attempt to walk the LRU list and
free entries, but that list may not be initialized yet if the server is
starting up for the first time. It's also possible for the shrinker to
kick in before we've initialized the LRU list.
Rearrange the initialization so that the LRU list_head and cache size
are initialized before doing any of the allocations that might fail.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's not safe to call hlist_del() on a newly initialized hlist_node.
That leads to a NULL pointer dereference. Only do that if the entry
is hashed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
Only compile-tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_new_stid() is no longer used since commit 3abdb60712 ("nfsd4:
simplify idr allocation"). Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.
A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.
Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.
Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives. Allowing simple, safe,
well understood work-arounds to known problematic software.
This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work. While writing this patch I saw a handful of such
cases. The most significant being autofs that lives in the module
autofs4.
This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.
After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module. The common pattern in the kernel is to call request_module()
without regards to the users permissions. In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted. In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull nfsd changes from J Bruce Fields:
"Miscellaneous bugfixes, plus:
- An overhaul of the DRC cache by Jeff Layton. The main effect is
just to make it larger. This decreases the chances of intermittent
errors especially in the UDP case. But we'll need to watch for any
reports of performance regressions.
- Containerized nfsd: with some limitations, we now support
per-container nfs-service, thanks to extensive work from Stanislav
Kinsbursky over the last year."
Some notes about conflicts, since there were *two* non-data semantic
conflicts here:
- idr_remove_all() had been added by a memory leak fix, but has since
become deprecated since idr_destroy() does it for us now.
- xs_local_connect() had been added by this branch to make AF_LOCAL
connections be synchronous, but in the meantime Trond had changed the
calling convention in order to avoid a RCU dereference.
There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.
* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
SUNRPC: make AF_LOCAL connect synchronous
nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
svcrpc: fix rpc server shutdown races
svcrpc: make svc_age_temp_xprts enqueue under sv_lock
lockd: nlmclnt_reclaim(): avoid stack overflow
nfsd: enable NFSv4 state in containers
nfsd: disable usermode helper client tracker in container
nfsd: use proper net while reading "exports" file
nfsd: containerize NFSd filesystem
nfsd: fix comments on nfsd_cache_lookup
SUNRPC: move cache_detail->cache_request callback call to cache_read()
SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
SUNRPC: rework cache upcall logic
SUNRPC: introduce cache_detail->cache_request callback
NFS: simplify and clean cache library
NFS: use SUNRPC cache creation and destruction helper for DNS cache
nfsd4: free_stid can be static
nfsd: keep a checksum of the first 256 bytes of request
sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
sunrpc: fix comment in struct xdr_buf definition
...
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
We're currently ignoring errors from vfs_getattr.
The correct thing to do is to do the stat in the main service procedure
not in the response encoding.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull user namespace and namespace infrastructure changes from Eric W Biederman:
"This set of changes starts with a few small enhnacements to the user
namespace. reboot support, allowing more arbitrary mappings, and
support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
user namespace root.
I do my best to document that if you care about limiting your
unprivileged users that when you have the user namespace support
enabled you will need to enable memory control groups.
There is a minor bug fix to prevent overflowing the stack if someone
creates way too many user namespaces.
The bulk of the changes are a continuation of the kuid/kgid push down
work through the filesystems. These changes make using uids and gids
typesafe which ensures that these filesystems are safe to use when
multiple user namespaces are in use. The filesystems converted for
3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The
changes for these filesystems were a little more involved so I split
the changes into smaller hopefully obviously correct changes.
XFS is the only filesystem that remains. I was hoping I could get
that in this release so that user namespace support would be enabled
with an allyesconfig or an allmodconfig but it looks like the xfs
changes need another couple of days before it they are ready."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
cifs: Enable building with user namespaces enabled.
cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
cifs: Convert struct cifs_sb_info to use kuids and kgids
cifs: Modify struct smb_vol to use kuids and kgids
cifs: Convert struct cifsFileInfo to use a kuid
cifs: Convert struct cifs_fattr to use kuid and kgids
cifs: Convert struct tcon_link to use a kuid.
cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
cifs: Convert from a kuid before printing current_fsuid
cifs: Use kuids and kgids SID to uid/gid mapping
cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
cifs: Override unmappable incoming uids and gids
nfsd: Enable building with user namespaces enabled.
nfsd: Properly compare and initialize kuids and kgids
nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
nfsd: Modify nfsd4_cb_sec to use kuids and kgids
nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
nfsd: Convert nfsxdr to use kuids and kgids
nfsd: Convert nfs3xdr to use kuids and kgids
...
The three variables are calculated from nr_free_buffer_pages so change
their types to unsigned long in case of overflow.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, NFSd is ready to operate in network namespace based containers.
So let's drop check for "init_net" and make it able to fly.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This tracker uses khelper kthread to execute binaries.
Execution itself is done from kthread context - i.e. global root is used.
This is not suitable for containers with own root.
So, disable this tracker for a while.
Note: one of possible solutions can be pass "init" callback to khelper, which
will swap root to desired one.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Functuon "exports_open" is used for both "/proc/fs/nfs/exports" and
"/proc/fs/nfsd/exports" files.
Now NFSd filesystem is containerised, so proper net can be taken from
superblock for "/proc/fs/nfsd/exports" reader.
But for "/proc/fs/nfsd/exports" only current->nsproxy->net_ns can be used.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch makes NFSD file system superblock to be created per net.
This makes possible to get proper network namespace from superblock instead of
using hard-coded "init_net".
Note: NFSd fs super-block holds network namespace. This garantees, that
network namespace won't disappear from underneath of it.
This, obviously, means, that in case of kill of a container's "init" (which is not a mount
namespace, but network namespace creator) netowrk namespace won't be
destroyed.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For most of SUNRPC caches (except NFS DNS cache) cache_detail->cache_upcall is
redundant since all that it's implementations are doing is calling
sunrpc_cache_pipe_upcall() with proper function address argument.
Cache request function address is now stored on cache_detail structure and
thus all the code can be simplified.
Now, for those cache details, which doesn't have cache_upcall callback (the
only one, which still has is nfs_dns_resolve_template)
sunrpc_cache_pipe_upcall will be called instead.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This callback will allow to simplify upcalls in further patches in this
series.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use uid_eq(uid, GLOBAL_ROOT_UID) instead of !uid.
Use gid_eq(gid, GLOBAL_ROOT_GID) instead of !gid.
Use uid_eq(uid, INVALID_UID) instead of uid == -1
Use gid_eq(uid, INVALID_GID) instead of gid == -1
Use uid = GLOBAL_ROOT_UID instead of uid = 0;
Use gid = GLOBAL_ROOT_GID instead of gid = 0;
Use !uid_eq(uid1, uid2) instead of uid1 != uid2.
Use !gid_eq(gid1, gid2) instead of gid1 != gid2.
Use uid_eq(uid1, uid2) instead of uid1 == uid2.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Change uid and gid in struct nfsd4_cb_sec to be of type kuid_t and
kgid_t.
In nfsd4_decode_cb_sec when reading uids and gids off the wire convert
them to kuids and kgids, and if they don't convert to valid kuids or
valid kuids ignore RPC_AUTH_UNIX and don't fill in any of the fields.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In struct nfs4_ace remove the member who and replace it with an
anonymous union holding who_uid and who_gid. Allowing typesafe
storage uids and gids.
Add a helper pace_gt for sorting posix_acl_entries.
In struct posix_user_ace_state to replace uid with a union
of kuid_t uid and kgid_t gid.
Remove all initializations of the deprecated posic_acl_entry
e_id field. Which is not present when user namespaces are enabled.
Split find_uid into two functions find_uid and find_gid that work
in a typesafe manner.
In nfs4xdr update nfsd4_encode_fattr to deal with the changes
in struct nfs4_ace.
Rewrite nfsd4_encode_name to take a kuid_t and a kgid_t instead
of a generic id and flag if it is a group or a uid. Replace
the group flag with a test for a valid gid.
Modify nfsd4_encode_user to take a kuid_t and call the modifed
nfsd4_encode_name.
Modify nfsd4_encode_group to take a kgid_t and call the modified
nfsd4_encode_name.
Modify nfsd4_encode_aclname to take an ace instead of taking the
fields of an ace broken out. This allows it to detect if the ace is
for a user or a group and to pass the appropriate value while still
being typesafe.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When reading uids and gids off the wire convert them to
kuids and kgids. If the conversion results in an invalid
result don't set the ATTR_UID or ATTR_GID.
When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When reading uids and gids off the wire convert them to kuids and
kgids.
When putting kuids and kgids onto the wire first convert them to uids
and gids the other side will understand.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
These trivial macros that don't currently do anything are the last
vestiages of an old attempt at uid mapping that was removed from the
kernel in September of 2002. Remove them to make it clear what the
code is currently doing.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Convert nfsd_map_name_to_uid to return a kuid_t value.
Convert nfsd_map_name_to_gid to return a kgid_t value.
Convert nfsd_map_uid_to_name to take a kuid_t parameter.
Convert nfsd_map_gid_to_name to take a kgid_t paramater.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
u32 and uid_t have the same size and semantics so this change
should have no operational effect. This just removes the WTF
factor when looking at variables that hold both uids and gids
whos type is uid_t.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Now that we're allowing more DRC entries, it becomes a lot easier to hit
problems with XID collisions. In order to mitigate those, calculate a
checksum of up to the first 256 bytes of each request coming in and store
that in the cache entry, along with the total length of the request.
This initially used crc32, but Chuck Lever and Jim Rees pointed out that
crc32 is probably more heavyweight than we really need for generating
these checksums, and recommended looking at using the same routines that
are used to generate checksums for IP packets.
On an x86_64 KVM guest measurements with ftrace showed ~800ns to use
csum_partial vs ~1750ns for crc32. The difference probably isn't
terribly significant, but for now we may as well use csum_partial.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Stones-thrown-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These routines are used by server and client code, so having them in a
separate header would be best.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't really need to preallocate at all; just allocate and initialize
everything at once, but leave the sc_type field initially 0 to prevent
finding the stateid till it's fully initialized.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When free nfs-client, it must free the ->cl_stateids.
Cc: stable@kernel.org
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we dynamically allocate them now, allow the system to call us up
to release them if it gets low on memory. Since these entries aren't
replaceable, only free ones that are expired or that are over the cap.
The the seeks value is set to '1' however to indicate that freeing the
these entries is low-cost.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's not sufficient to only clean the cache when requests come in. What
if we have a flurry of activity and then the server goes idle? Add a
workqueue job that will clean the cache every RC_EXPIRE period.
Care is taken to only run this when we expect to have entries expiring.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to keep entries around that we're declaring RC_NOCACHE.
Ditto if there's a problem with the entry.
With this change too, there's no need to test for RC_UNUSED in the
search function. If the entry's in the hash table then it's either
INPROG or DONE.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With the change to dynamically allocate entries, the cache is never
disabled on the fly. Remove this flag.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The existing code keeps a fixed-size cache of 1024 entries. This is much
too small for a busy server, and wastes memory on an idle one. This
patch changes the code to dynamically allocate and free these cache
entries.
A cap on the number of entries is retained, but it's much larger than
the existing value and now scales with the amount of low memory in the
machine.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...otherwise, we end up with the list ordering wrong. Currently, it's
not a problem since we skip RC_INPROG entries, but keeping the ordering
strict will be necessary for a later patch that adds a cache cleaner.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Later, we'll need more than one call site for this, so break it out
into a new function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a preprocessor constant for the expiry time of cache entries, and
move the test for an expired entry into a function. Note that the current
code does not test for RC_INPROG. It just assumes that it won't take more
than 2 minutes to fill out an in-progress entry.
I'm not sure how valid that assumption is though, so let's just ensure
that we never consider an RC_INPROG entry to be expired.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Entries can only get a c_type of RC_REPLBUFF iff they are
RC_DONE. Therefore the test for RC_DONE isn't necessary here.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we use kmalloc() which wastes a little bit of memory on each
allocation since it's a power of 2 allocator. Since we're allocating a
1024 of these now, and may need even more later, let's create a new
slabcache for them.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The locking rules for cache entries say that locking the cache_lock
isn't needed if you're just touching the current entry. Earlier
in this function we set rp->c_state to RC_UNUSED without any locking,
so I believe it's ok to do the same here.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it only stores the first 16 bytes of any address. struct
sockaddr_in6 is 28 bytes however, so we're currently ignoring the last
12 bytes of the address.
Expand the c_addr field to a sockaddr_in6, and cast it to a sockaddr_in
as necessary. Also fix the comparitor to use the existing RPC
helpers for this.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In func svc_export_parse, the uuid which used kmemdup to alloc will be
changed in func export_update.So the later kfree don't free this memory.
And it can't be free in func svc_export_parse because other place still
used.So put this operation in func svc_export_put.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code will allow silly things like:
echo "+2 +3 +4 +7.1">/proc/fs/nfsd/versions
Reported-by: Fan Chaoting <fanchaoting@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If CONFIG_LOCKDEP is disabled, then there would be a warning like this:
CC [M] fs/nfsd/nfs4state.o
fs/nfsd/nfs4state.c: In function ‘free_client’:
fs/nfsd/nfs4state.c:1051:19: warning: unused variable ‘nn’ [-Wunused-variable]
So, let's add "maybe_unused" tag to this variable.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the procedure of CREATE_SESSION, the state is locked after
alloc_conn_from_crses(). If the allocation fails, the function
goes to "out_free_session", and then "out" where there is an
unlock function.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In alloc_session(), numslots is the correct slot number used by the session.
But the slot number passed to nfsd4_put_drc_mem() is the one from nfs client.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It seems slightly simpler to make nfsd4_encode_fattr rather than its
callers responsible for advancing the write pointer on success.
(Also: the count == 0 check in the verify case looks superfluous.
Running out of buffer space is really the only reason fattr encoding
should fail with eresource.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 79f77bf9a4.
This is obviously wrong, and I have no idea how I missed seeing the
warning in testing: I must just not have looked at the right logs. The
caller bumps rq_resused/rq_next_page, so it will always be hit on a
large enough read.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Note the stateid is hashed early on in init_stid(), but isn't currently
being unhashed on error paths.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As far as I can tell this shouldn't currently happen--or if it does,
something is wrong and data is going to be corrupted.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the argument and reply together exceed the maximum payload size, then
a reply with a read-like operation can overlow the rq_pages array.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
To ensure ordering of read data with any following operations, turn off
zero copy if the read is not the final operation in the compound.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If len == 0 we end up with size = (0 - 1), which could cause bad things
to happen in copy_from_user().
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I honestly have no idea where I got 129 from, but it's a much bigger
value than the actual buffer size (INET6_ADDRSTRLEN).
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since NFSd service is per-net now, we have to pass proper network
context in nfsd_shutdown() from NFSd kthreads.
The simplest way I found is to get proper net from one of transports
with permanent sockets.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Function nfsd_shutdown is called from two places: nfsd_last_thread (when last
kernel thread is exiting) and nfsd_svc (in case of kthreads starting error).
When calling from nfsd_svc(), we can be sure that per-net resources are
allocated, so we don't need to check per-net nfsd_net_up boolean flag.
This allows us to remove nfsd_shutdown function at all and move check for
per-net nfsd_net_up boolean flag to nfsd_last_thread.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we have generic NFSd resurces, we have to introduce some way how to
allocate and destroy those resources on first per-net NFSd start and on
last per-net NFSd stop respectively.
This patch replaces global boolean nfsd_up flag (which is unused now) by users
counter and use it to determine either we need to allocate generic resources
or destroy them.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch moves nfsd_startup_generic() and nfsd_shutdown_generic()
calls to nfsd_startup_net() and nfsd_shutdown_net() respectively, which
allows us to call nfsd_startup_net() instead of nfsd_startup() and makes
the code look clearer. It also modifies nfsd_svc() and nfsd_shutdown()
to check nn->nfsd_net_up instead of global nfsd_up. The latter is now
used only for generic resources shutdown and is currently useless. It
will replaced by NFSd users counter later in this series.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSd have per-net resources and resources, used globally.
Let's move generic resources init and shutdown to separated functions since
they are going to be allocated on first NFSd service start and destroyed after
last NFSd service shutdown.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch makes main step in NFSd containerisation.
There could be different approaches to how to make NFSd able to handle
incoming RPC request from different network namespaces. The two main
options are:
1) Share NFSd kthreads betwween all network namespaces.
2) Create separated pool of threads for each namespace.
While first approach looks more flexible, second one is simpler and
non-racy. This patch implements the second option.
To make it possible to allocate separate pools of threads, we have to
make it possible to allocate separate NFSd service structures per net.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is simple: an NFSd service can be started at different times in
different network environments. So, its "boot time" has to be assigned
per net.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch introduces introduces per-net "nfsd_net_up" boolean flag, which has
the same purpose as general "nfsd_up" flag - skip init or shutdown of per-net
resources in case of they are inited on shutted down respectively.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSd resources are partially per-net and partially globally used.
This patch splits resources init and shutdown and moves per-net code to
separated functions.
Generic and per-net init and shutdown are called sequentially for a while.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There could be a situation, when NFSd was started in one network namespace, but
stopped in another one.
This will trigger kernel panic, because RPCBIND client is stored on per-net
NFSd data, and will be NULL on NFSd shutdown.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With NFSv4, if we create a file then open it we explicit avoid checking
the permissions on the file during the open because the fact that we
created it ensures we should be allow to open it (the create and the
open should appear to be a single operation).
However if the reply to an EXCLUSIVE create gets lots and the client
resends the create, the current code will perform the permission check -
because it doesn't realise that it did the open already..
This patch should fix this.
Note that I haven't actually seen this cause a problem. I was just
looking at the code trying to figure out a different EXCLUSIVE open
related issue, and this looked wrong.
(Fix confirmed with pynfs 4.0 test OPEN4--bfields)
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
[bfields: use OWNER_OVERRIDE and update for 4.1]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pointer to client tracking operations - client_tracking_ops - have to be
containerized, because different environment can support different trackers
(for example, legacy tracker currently is not suported in container).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix nfsd4_lockt and release_lockowner to lookup the referenced client,
so that it can renew it, or correctly return "expired", as appropriate.
Also share some code while we're here.
Reported-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Write the client's ip address to any state file and all appropriate
state for that client will be forgotten.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields