Commit graph

16 commits

Author SHA1 Message Date
Jiro SEKIBA
1dfa27105a nilfs2: stop using periodic write_super callback
This removes nilfs_write_super and commit super block in nilfs
internal thread, instead of periodic write_super callback.

VFS layer calls ->write_super callback periodically.  However,
it looks like that calling back is ommited when disk I/O is busy.
And when cleanerd (nilfs GC) is runnig, disk I/O tend to be busy thus
nilfs superblock is not synchronized as nilfs designed.

To avoid it, syncing superblock by nilfs thread instead of pdflush.

Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:14 +09:00
Ryusuke Konishi
a97778457f nilfs2: fix oops due to inconsistent state in page with discrete b-tree nodes
Andrea Gelmini gave me a report that a kernel oops hit on a nilfs
filesystem with a 1KB block size when doing rsync.

This turned out to be caused by an inconsistency of dirty state
between a page and its buffers storing b-tree node blocks.

If the page had multiple buffers split over multiple logs, and if the
logs were written at a time, a dirty flag remained in the page even
every dirty flag in the buffers was cleared.

This will fix the failure by dropping the dirty flag properly for
pages with the discrete multiple b-tree nodes.

Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: stable@kernel.org
2009-08-01 22:48:32 +09:00
Ryusuke Konishi
8227b29722 nilfs2: fix hang problem of log writer which occurs after write failures
Leandro Lucarella gave me a report that nilfs gets stuck after its
write function fails.

The problem turned out to be caused by bugs which leave writeback flag
on pages.  This fixes the problem by ensuring to clear the writeback
flag in error path.

Reported-by: Leandro Lucarella <llucax@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
2009-07-05 10:44:20 +09:00
Ryusuke Konishi
0cfae3d879 nilfs2: remove unlikely directive causing mis-conversion of error code
The following error code handling in nilfs_segctor_write() function
wrongly converted negative error codes to a truth value (i.e. 1):

   err = unlikely(err) ? : res;

which originaly meant to be

   err = err ? : res;

This mis-conversion caused that write or sync functions receive the
unexpected error code.  This fixes the bug by removing the unlikely
directive.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@kernel.org
2009-07-05 10:44:19 +09:00
Ryusuke Konishi
071cb4b819 nilfs2: eliminate removal list of segments
This will clean up the removal list of segments and the related
functions from segment.c and ioctl.c, which have hurt code
readability.

This elimination is applied by using nilfs_sufile_updatev() previously
introduced in the patch ("nilfs2: add sufile function that can modify
multiple segment usages").

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi
4f6b828837 nilfs2: fix lock order reversal in nilfs_clean_segments ioctl
This is a companion patch to ("nilfs2: fix possible circular locking
for get information ioctls").

This corrects lock order reversal between mm->mmap_sem and
nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by
lockdep check:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00003-g360bdc1 #7
 -------------------------------------------------------
 mmap/5294 is trying to acquire lock:
  (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
        [<c01470a5>] __lock_acquire+0x1066/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c01836bc>] might_fault+0x68/0x88
        [<c023c61d>] copy_from_user+0x2a/0x111
        [<d0d120d0>] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2]
        [<d0d0e2aa>] nilfs_clean_segments+0x6d/0x1b9 [nilfs2]
        [<d0d11f68>] nilfs_ioctl+0x2ad/0x318 [nilfs2]
        [<c01a3be7>] vfs_ioctl+0x22/0x69
        [<c01a408e>] do_vfs_ioctl+0x460/0x499
        [<c01a4107>] sys_ioctl+0x40/0x5a
        [<c01031a4>] sysenter_do_call+0x12/0x38
        [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
        [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c0433f1d>] down_read+0x2a/0x3e
        [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
        [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
        [<c0183b0b>] __do_fault+0x165/0x376
        [<c01855cd>] handle_mm_fault+0x287/0x5d1
        [<c043712d>] do_page_fault+0x2fb/0x30a
        [<c0435462>] error_code+0x72/0x78
        [<ffffffff>] 0xffffffff

where nilfs_clean_segments() holds:

  nilfs->ns_segctor_sem -> copy_from_user()
                             --> page fault -> mm->mmap_sem

And, page fault path may hold:

  page fault -> mm->mmap_sem
         --> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem

Even though nilfs_clean_segments() does not perform write access on
given user pages, it may cause deadlock because nilfs->ns_segctor_sem
is shared per device and mm->mmap_sem can be shared with other tasks.

To avoid this problem, this patch moves all calls of copy_from_user()
outside the nilfs->ns_segctor_sem lock in the ioctl.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-11 14:54:41 +09:00
Ryusuke Konishi
e339ad31f5 nilfs2: introduce secondary super block
The former versions didn't have extra super blocks.  This improves the
weak point by introducing another super block at unused region in tail of
the partition.

This doesn't break disk format compatibility; older versions just ingore
the secondary super block, and new versions just recover it if it doesn't
exist.  The partition created by an old mkfs may not have unused region,
but in that case, the secondary super block will not be added.

This doesn't make more redundant copies of the super block; it is a future
work.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:20 -07:00
Ryusuke Konishi
cece552074 nilfs2: simplify handling of active state of segments
will reduce some lines of segment constructor.  Previously, the state was
complexly controlled through a list of segments in order to keep
consistency in meta data of usage state of segments.  Instead, this
presents ``calculated'' active flags to userland cleaner program and stop
maintaining its real flag on disk.

Only by this fake flag, the cleaner cannot exactly know if each segment is
reclaimable or not.  However, the recent extension of nilfs_sustat ioctl
struct (nilfs2-extend-nilfs_sustat-ioctl-struct.patch) can prevent the
cleaner from reclaiming in-use segment wrongly.

So, now I can apply this for simplification.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:20 -07:00
Ryusuke Konishi
c96fa464a5 nilfs2: mark minor flag for checkpoint created by internal operation
Nilfs creates checkpoints even for garbage collection or metadata updates
such as checkpoint mode change.  So, user often sees checkpoints created
only by such internal operations.

This is inconvenient in some situations.  For example, application that
monitors checkpoints and changes them to snapshots, will fall into an
infinite loop because it cannot distinguish internally created
checkpoints.

This patch solves this sort of problem by adding a flag to checkpoint for
identification.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi
458c5b0822 nilfs2: clean up sketch file
The sketch file is a file to mark checkpoints with user data.  It was
experimentally introduced in the original implementation, and now
obsolete.  The file was handled differently with regular files; the file
size got truncated when a checkpoint was created.

This stops the special treatment and will treat it as a regular file.
Most users are not affected because mkfs.nilfs2 no longer makes this file.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi
1f5abe7e7d nilfs2: replace BUG_ON and BUG calls triggerable from ioctl
Pekka Enberg advised me:
> It would be nice if BUG(), BUG_ON(), and panic() calls would be
> converted to proper error handling using WARN_ON() calls. The BUG()
> call in nilfs_cpfile_delete_checkpoints(), for example, looks to be
> triggerable from user-space via the ioctl() system call.

This will follow the comment and keep them to a minimum.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi
2c2e52fc4f nilfs2: extend nilfs_sustat ioctl struct
This adds a new argument to the nilfs_sustat structure.

The extended field allows to delete volatile active state of segments,
which was needed to protect freshly-created segments from garbage
collection but has confused code dealing with segments.  This
extension alleviates the mess and gives room for further
simplifications.

The volatile active flag is not persistent, so it's eliminable on this
occasion without affecting compatibility other than the ioctl change.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi
1088dcf4c3 nilfs2: remove timedwait ioctl command
This removes NILFS_IOCTL_TIMEDWAIT command from ioctl interface along
with the related flags and wait queue.

The command is terrible because it just sleeps in the ioctl.  I prefer
to avoid this by devising means of event polling in userland program.
By reconsidering the userland GC daemon, I found this is possible
without changing behaviour of the daemon and sacrificing efficiency.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:18 -07:00
Ryusuke Konishi
47420c7998 nilfs2: avoid double error caused by nilfs_transaction_end
Pekka Enberg pointed out that double error handlings found after
nilfs_transaction_end() can be avoided by separating abort operation:

 OK, I don't understand this. The only way nilfs_transaction_end() can
 fail is if we have NILFS_TI_SYNC set and we fail to construct the
 segment. But why do we want to construct a segment if we don't commit?

 I guess what I'm asking is why don't we have a separate
 nilfs_transaction_abort() function that can't fail for the erroneous
 case to avoid this double error value tracking thing?

This does the separation and renames nilfs_transaction_end() to
nilfs_transaction_commit() for clarification.

Since, some calls of these functions were used just for exclusion control
against the segment constructor, they are replaced with semaphore
operations.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:17 -07:00
Ryusuke Konishi
f30bf3e40f nilfs2: fix missed-sync issue for do_sync_mapping_range()
Chris Mason pointed out that there is a missed sync issue in
nilfs_writepages():

On Wed, 17 Dec 2008 21:52:55 -0500, Chris Mason wrote:
> It looks like nilfs_writepage ignores WB_SYNC_NONE, which is used by
> do_sync_mapping_range().

where WB_SYNC_NONE in do_sync_mapping_range() was replaced with
WB_SYNC_ALL by Nick's patch (commit:
ee53a891f4).

This fixes the problem by letting nilfs_writepages() write out the log of
file data within the range if sync_mode is WB_SYNC_ALL.

This involves removal of nilfs_file_aio_write() which was previously
needed to ensure O_SYNC sync writes.

Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:15 -07:00
Ryusuke Konishi
9ff05123e3 nilfs2: segment constructor
This adds the segment constructor (also called log writer).

The segment constructor collects dirty buffers for every dirty inode,
makes summaries of the buffers, assigns disk block addresses to the
buffers, and then submits BIOs for the buffers.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:15 -07:00