Commit graph

1455 commits

Author SHA1 Message Date
Guenter Roeck
2dd59c26e9 hwmon: (w83627ehf) Update Kconfig for W83677HG-B, NCT6775F and NCT6776F
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:19 -07:00
Guenter Roeck
3382a918da hwmon: (w83627ehf) Store rpm instead of raw fan speed data
Since the fan speed value can be above 0xff, we can no longer use
that value to determine if the fan speed reading is valid. This
makes it difficult to manipulate the stored fan speed register value.

If we store rpm instead of the fan speed register value, we do not
need to correct it if the fan divisor value is changed, and the above
mentioned problem no longer exists.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:18 -07:00
Guenter Roeck
26bc440e3f hwmon: (w83627ehf) Use 16 bit fan count registers if supported
Some of the chips supported by this driver have 13 bit or 16 bit fan count
registers. This patch improves support for those registers, specifically for
NCT6775F. With the changes in this patch, fan speed is reported correctly even
if the fan divider is set to a low value, which results in a fan speed reading
above 0xff.

With this patch, the width of fan count registers is no longer used to determine
if the chip has fan divider register(s) or not. A dedicated flag is used instead
to determine if this is the case.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:18 -07:00
Guenter Roeck
ec3e5a1644 hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F
This patch adds support for NCT6775F and NCT6776F to the w83627ehf driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Ian Dobson <i.dobson@planet-ian.com> (NCT6776F)
Tested-by: Zachary Marzec <zmarzec@gmail.com> (ASUS P8P67 PRO/NCT6776F)
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:17 -07:00
Guenter Roeck
b84bb51862 hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup
If SmartFan IV mode was configured at startup, it should be possible
to re-enable it later on.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:16 -07:00
Guenter Roeck
279af1a91a hwmon: (w83627ehf) Convert register arrays to 16 bit, and convert access to pointers
For newer chips, several registers are banked and thus need to be 16 bit.
Also, register addresses change.

To prepare for those chips, convert affected register arrays to 16 bit,
and change access to those registers to array pointers in struct w83627ehf_data.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:16 -07:00
Guenter Roeck
d36cf32c9a hwmon: (w83627ehf) Improve support for W83667HG-B
Add support for 4th temperature sensor on W83677HG-B.
Display temperature labels on W83677HG-B to report temperature sources.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:14 -07:00
Guenter Roeck
83cc8985b8 hwmon: (w83627ehf) Optimize multi-bank register access
Assume that each register is banked, and set the bank for each access.
Cache the bank number so it only needs to be set if it changes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:14 -07:00
Guenter Roeck
e7e1ca6ef4 hwmon: (w83627ehf) Fixed most checkpatch warnings and errors
This cleanup fixes most of the checkpatch warnings and errors in the w83627ehf
driver. Remaining warnings and errors are left untouched on purpose to avoid
making the code less readable.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:13 -07:00
Guenter Roeck
bce26c58df hwmon: (w83627ehf) Unify temperature register access, and use strict string conversions
This patch unifies temperature register access, and replaces simple_strtoXXX
with strict_strtoXXX throughout the driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:13 -07:00
per.dalen@appeartv.com
de7790155f hwmon: Add support for LTC4151
LTC4151 is High Voltage I2C Current and Voltage Monitor from Linear
Technology.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:11 -07:00
Guenter Roeck
9f6ad1ce64 hwmon: (pmbus) Fix LINEAR16 data format
LINEAR16 data format is unsigned, not signed. Impact is that affected
attributes report negative values in the upper half of the supported
value range.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:11 -07:00
Guenter Roeck
8677011a5d hwmon: (pmbus) Continuously update temperature limit registers
PMBus only has one set of limit registers for up to three temperature sensors.
Thus, changing a limit for one of the temperature sensors affects limits for
other temperature sensors in the same page (and potentially multiple pages
depending on the chip implementation). To handle this situation, re-read all
temperature limit registers when updating sensor data. This way, all affected
temperature limits are updated whenever the limit for a single sensor is
changed.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:10 -07:00
Guenter Roeck
b49547a5df hwmon: (pmbus) Improve support for paged temperature sensors
Assumption so far was that PMBus devices would support TEMP2 and TEMP3 registers
only on page 0, and that only the TEMP1 register would be used/supported
on other pages.

Turns out that is not correct. UCD92xx devices support TEMP1 and TEMP2 on
page 0, and TEMP2 on other pages. So it is necessary to change the core code
such that it does not make a page based assumptions about temperature register
support.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:09 -07:00
Guenter Roeck
954df6763c hwmon: (pmbus) Improve support for paged fans
So far, it seemed like fans would either all be in page 0, or that
there would be one page per fan.

Turns out this was a wrong assumption. There is at least one PMBus
fan controller which supports three pages with four fans each.
Update code to handle this situation.

Reported-by: Greg Schnorr <gschnorr@cisco.com>
Tested-by: Greg Schnorr <gschnorr@cisco.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Greg Schnorr <gschnorr@cisco.com>
2011-03-14 22:39:09 -07:00
Guenter Roeck
83274c68a3 hwmon: (pmbus) More stringent checking of VOUT_MODE register
Some PMBus chips do not support the VOUT_MODE register. To make matters worse,
such chips may not return an error when reading the register either, but instead
return 0xff.

Check if the register exists using pmbus_check_byte_register() before reading
its value. In addition, validate the returned value and ignore it if it is 0xff
(which is invalid).

Reported-by: Greg Schnorr <gschnorr@cisco.com>
Tested-by: Greg Schnorr <gschnorr@cisco.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Greg Schnorr <gschnorr@cisco.com>
2011-03-14 22:39:08 -07:00
Guenter Roeck
a3eeb45353 hwmon: (pmbus) Add support for Maxim MAX34440/MAX34441
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:39:07 -07:00
Guenter Roeck
dcb7d0668b hwmon: (pmbus) Add support for Maxim MAX16064
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:39:07 -07:00
Guenter Roeck
8ea3238ba1 hwmon: (pmbus) Add support for Maxim MAX8688
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:39:06 -07:00
Guenter Roeck
442aba7872 hwmon: PMBus device driver
This driver adds support for hardware monitoring features of various PMBus
devices.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:36:26 -07:00
Guenter Roeck
06923f8442 hwmon: (lm85) Add support for EMC6D103S
EMC6D103S is similar to EMC6D103, only it does not support registers 62[5:7],
6D[0:7], and 6E[0:7]. Register respective sysfs attributes and update affected
registers for all other chips only.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
4f8ab430fa hwmon: (lm85) Do not update hysteresis and temp_auto_off if auto_temp_min is changed
So far, the driver updates temp_auto_hyst and temp_auto_off if temp_auto_min changes.
This may cause problems if temp_auto_off was not configured before configuring
temp_auto_min, because one of the variables used (off_desired) is not initialized
in this case.

To simplify the code, and for consistency with other drivers, no longer update the delta
between "min" and "off" until the user sets the "off" value again.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
bc6db2b5ce hwmon: (lm85) Use function to remove sysfs attribute files
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
de24880586 hwmon: (lm85) Use boolean to determine if VID5 is configured
ADT7463 and ADT7468 optionally support VID5 instead of the standard +12V
measurement input. Use a boolean to identify the chip configuration instead of
hardcoding it several times.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
502b5a0199 hwmon: Add support for Lineage Compact Power Line PEM devices
This patch adds support for hardware monitoring of Lineage Compact Power Line
Power Entry Modules.

Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:25 -07:00
Mark Brown
4e9be65059 hwmon: (lis3lv02d) Convert SPI to dev_pm_ops
There is a move to deprecate bus-specific PM operations and move to
using dev_pm_ops instead in order to reduce the amount of boilerplate
code in buses and facilitiate updates to the PM core. Do this move for
the lis3lv02d SPI driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:25 -07:00
stigge@antcom.de
177f3b920c hwmon: (max6639) Set reasonable default PWM frequency
This patch initializes register CONFIG3 to a reasonable default PWM frequency
of 25kHz, to prevent audible sound in fan.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:25 -07:00
stigge@antcom.de
a5b79d62f2 hwmon: Driver for Maxim MAX6639
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:24 -07:00
Hans de Goede
d9ebaa4547 hwmon/f71882fg: Set platform drvdata to NULL later
This avoids a possible race leading to trying to dereference NULL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-13 07:42:52 -07:00
Hans de Goede
14a4019de8 hwmon/f71882fg: Fix a typo in a comment
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-13 07:40:41 -07:00
Grant Likely
4ebb24f707 dt/sparc: Eliminate users of of_platform_{,un}register_driver
Get rid of old users of of_platform_driver in arch/sparc.  Most
of_platform_driver users can be converted to use the platform_bus
directly.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 01:36:39 -07:00
axel lin
a7254d68b6 hwmon: (adt7411) add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26 08:59:32 -08:00
axel lin
6407deb594 hwmon: (ad7414) add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26 08:59:32 -08:00
Jan Beulich
f065a93e16 hwmon: (lm85) extend to support EMC6D103 chips
The interface is identical EMC6D102, so all that needs to be added are
some definitions and their uses.

Registers apparently missing in EMC6D103S/EMC6D103:A2 compared to EMC6D103:A0,
EMC6D103:A1, and EMC6D102 (according to the data sheets), but used
unconditionally in the driver: 62[5:7], 6D[0:7], and 6E[0:7]. For that
reason, EMC6D103S chips don't get enabled for the time being.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
(Guenter Roeck: Replaced EMC6D103_A2 with EMC6D103S per EMC6D103S datasheet)
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
2011-02-18 17:43:36 -08:00
Clemens Ladisch
aa4790a628 hwmon: (k10temp) add support for AMD Family 12h/14h CPUs
Add the PCI ID to support the internal temperature sensor of the
AMD "Llano" and "Brazos" processor families.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org # ca86828: x86, AMD, PCI: Add AMD northbridge PCI device
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-18 06:14:24 -08:00
Clemens Ladisch
2c6315da6a hwmon: (jc42) do not allow writing to locked registers
On systems where the temperature sensor is actually used, the BIOS is
likely to have locked the alarm registers.  In that case, all writes
through the corresponding sysfs files would be silently ignored.

To prevent this, detect the locks and make the affected sysfs files
read-only.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:33 -08:00
Clemens Ladisch
d5622f5b6c hwmon: (jc42) more helpful documentation
The documentation lists standard numbers and chip names in excruciating
detail, but that's all it does.  To help mere mortals in deciding
whether to enable this driver, mention what this sensor is for and in
which systems it might be found.

Also add a link to the actual JC 42.4 specification.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:32 -08:00
Clemens Ladisch
e866729605 hwmon: (jc42) fix type mismatch
In set_temp_crit_hyst(), make the variable 'val' have the correct
type for strict_strtoul().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:31 -08:00
Guenter Roeck
bcf721d14d hwmon: (emc1403) Fix I2C address range
I2C address range included 0x2a, which the chips do not support.
Replace with 0x29 which is supported but was missing.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-02-09 13:45:52 -08:00
Dirk Eibach
2778fb13ba hwmon: (lm63) Consider LM64 temperature offset
LM64 has 16 degrees Celsius temperature offset on all
remote sensor registers.
This was not considered When LM64 support was added to lm63.c.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
2011-02-09 13:45:42 -08:00
Kalhan Trisal
a20f0bc10c hwmon: (lis3) turn down the no IRQ message
Turn down the no IRQ message - on some platforms that's a normal state of
affairs.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-25 09:10:50 -08:00
Luca Tettamanti
86ca33e825 hwmon: (asus_atk0110) Override interface detection on Sabertooth X58
ASUS Sabertooth X58 has a bug in ACPI that prevents the reading of MCH
temperature when the "old" ATK0110 interface is used. Add a DMI entry
to override the detection heuristic and force the use of the "new"
interface on this board.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Tested-by: Joris Creyghton <jorisctn@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-23 09:30:08 -08:00
Henrik Rydberg
9d1f8a40dd hwmon: (applesmc) Properly initialize lockdep attributes
The switch to dynamically allocated sysfs attributes left the
internal lockdep members uninitialized, causing a formal bug.
This patch adds sysfs_attr_init() to the node creation function,
remedying the problem.

Reported-and-tested-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-23 09:28:50 -08:00
Guenter Roeck
c7bf71c517 hwmon: (lm93) Add support for LM94
This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18 12:22:54 -08:00
Juerg Haefliger
06f3d9fb4a hwmon: (dme1737) Minor cleanups
Minor cleanups. Mostly removing assignments in if statements to get
rid of checkpatch errors.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:13 +01:00
Juerg Haefliger
d4b94e1fa6 hwmon: (dme1737) Add support for in7 for SCH5127
Add support for the 1.5V voltage monitoring input (in7) of the
SMSC SCH5127 chip.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:13 +01:00
Jekyll Lai
7a1b76f2a4 hwmon: (emc1403) Add EMC1423 support
EMC1423 uses the similar register and adds a hardware shutdown pin to
protect exceed temperature. This function is set by resistor; it's not
necessary to do anything in the driver except add the emc1423 pid of 0x23.

Signed-off-by: Jekyll Lai <jekyll_lai@wistron.com>
[Updated Kconfig/comments and minor further changes asked for by the hwmon
 maintainers]
Signed-off-by: Alan Cox <alan@linux.intel.com>
[Fixed checkpatch warning]
Signed-of--by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:12 +01:00
Jean Delvare
36c7fe133e hwmon: (w83793) Drop useless mutex
This is the same case as fschmd, from which the code was copied as far
as I can see. So the same clean-up applies:

The WDIOC_GETSUPPORT ioctl only needs a mutex because it operates on a
static variable. There is no good reason to keep this variable static,
so let's just make it non-static and drop the now useless mutex
altogether.

See the discussion at:
http://marc.info/?l=lm-sensors&m=125563869402323&w=2

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-12 21:55:11 +01:00
Jean Delvare
1b7243e8f5 hwmon: (fschmd) Drop useless mutex
As discussed one year ago, the WDIOC_GETSUPPORT ioctl only needs a
mutex because it operates on a static variable. There is no good
reason to keep this variable static, so let's just make it non-static
and drop the now useless mutex altogether.

See the discussion at:
http://marc.info/?l=lm-sensors&m=125563869402323&w=2

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-12 21:55:11 +01:00
Joe Perches
1ca28218eb hwmon: (w83781d) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

[JD: Optimize repeated debug messages]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:11 +01:00
Joe Perches
5e24e0c365 hwmon: (pc87427) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:11 +01:00
Joe Perches
9e991c6fad hwmon: (pc87360) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

[JD: Also convert debug messages]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:11 +01:00
Joe Perches
ce47da742d hwmon: (lm78) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:10 +01:00
Joe Perches
a8ca103793 hwmon: (it87) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:10 +01:00
Jean Delvare
a516dc3e9b hwmon: (w83793) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:10 +01:00
Jean Delvare
c32301b595 hwmon: (w83792d) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Jean Delvare
0de2b24480 hwmon: (adm9240) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Jean Delvare
f790674d3f hwmon: (via686a) Initialize fan_div values
Functions set_fan_min() and set_fan_div() assume that the fan_div
values have already been read from the register. The driver currently
doesn't initialize them at load time, they are only set when function
via686a_update_device() is called. This means that set_fan_min() and
set_fan_div() misbehave if, for example, "sensors -s" is called
before any monitoring application (e.g. "sensors") is has been run.

Fix the problem by always initializing the fan_div values at device
bind time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Jean Delvare
014bcd28a0 hwmon: (w83795) Silent false warning from gcc
The code triggers a false warning with older versions of gcc:
w83795.c: In function 'w83795_update_device':
w83795.c:475: warning: 'lsb' may be used uninitialized in this function

I admit that the code is a little tricky, but I see no way to write it
differently without hurting performance. So let's just silent the
warning with a needless initialization.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Steven Hardy
5d84291da3 hwmon: (ads7828) Update email contact details
Trivial patch updating my email contact details due to change of
employer, and because I no longer have access to the previously used
domain.

Unfortunately I also no longer have access to any ads7828 hardware, but
am happy to support/maintain the driver if others are able to test
changes.

Signed-off-by: Steve Hardy <shardy@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:08 +01:00
Roland Stigge
6099469805 hwmon: Support for Dallas Semiconductor DS620
Driver for Dallas Semiconductor DS620 temperature sensor and thermostat

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-09 09:10:10 -08:00
Urs Fleisch
430400b863 hwmon: driver for Sensirion SHT21 humidity and temperature sensor
Signed-off-by: Urs Fleisch <urs.fleisch@sensirion.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:56:28 -08:00
Jan Beulich
ae9e0ce73e hwmon: (via-cputemp) sync hotplug handling with coretemp/pkgtemp
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:48 -08:00
Davide Rizzo
0f1deb4b82 hwmon: (lm95241) Rewrite to avoid using macros
Signed-off-by: Davide Rizzo <elpa.rizzo@gmail.com>
[guenter.roeck@ericsson.com: Formatting changes]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:47 -08:00
Guenter Roeck
2bfe814826 hwmon: (applesmc) Fix checkpatch errors and fix value range checks
This patch fixes all checkpatch errors and most of the checkpatch warnings.
It also fixes the range check in applesmc_store_fan_speed().

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
2011-01-08 10:55:46 -08:00
Henrik Rydberg
41e71f9717 hwmon: (applesmc) Update copyright information
With the preceding patches, git blame assigns about half of
the file to the present author. Add a line to the copyright
to reflect this.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:45 -08:00
Henrik Rydberg
0b8ad5a57b hwmon: (applesmc) Silence driver
Make the driver report a single line on success.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:44 -08:00
Henrik Rydberg
0b0b5dff89 hwmon: (applesmc) Simplify feature sysfs handling
Given the dynamic node construction method, the setup of the
accelerometer, light sensor and keyboard backlight sysfs nodes
can be simplified. This patch does not contain any logic changes.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:43 -08:00
Henrik Rydberg
3eba2bf7c5 hwmon: (applesmc) Dynamic creation of fan files
With the dynamic temperature group in place, the setup of fans
can be simplified. This patch sets up the fans dynamically, removing
a hundred lines of code.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:42 -08:00
Henrik Rydberg
40ef06f112 hwmon: (applesmc) Extract all features generically
With temperature keys being determined automatically, the dmi match
data is only used to assign features that can easily be detected from
the smc. This patch removes the dmi match data altogether, and reduces
the match table to the main machine models.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:41 -08:00
Henrik Rydberg
dcdea2614a hwmon: (applesmc) Handle new temperature format
The recent Macbooks have temperature registers of a new type.
This patch adds the logic to handle them.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:40 -08:00
Henrik Rydberg
9792dadfce hwmon: (applesmc) Dynamic creation of temperature files
The current driver creates temperature files based on a list
of temperature keys given per device. Apart from slow adaption
to new machine models, the number of sensors also depends on
the number of processors. This patch looks up the temperature
keys dynamically, thereby supporting all models.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:39 -08:00
Henrik Rydberg
5874583d56 hwmon: (applesmc) Introduce a register lookup table
One main problem with the current driver is the inability to quickly
search for supported keys, resulting in detailed feature maps per
machine model which are cumbersome to maintain.

This patch adds a register lookup table, which enables binary search
for supported keys. The lookup also reduces the io frequency, so the
original mutex is replaced by locks around the actual io.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
[guenter.roeck@ericsson.com: Added value range check to key_at_index_store()]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:38 -08:00
Joe Perches
1ee7c71bd1 hwmon: (applesmc) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:37 -08:00
Henrik Rydberg
2344cd0c2e hwmon: (applesmc) Relax the severity of device init failure
The device init is used to reset the accelerometer. Failure to reset
is not severe enough to stop loading the module or to resume from
hibernation.  This patch relaxes failure to a warning and drops
output in case of success.

Cc: stable@kernel.org
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:35 -08:00
Edgar Hucek
132af03233 hwmon: (applesmc) Add MacBookAir3,1(3,2) support
This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the
applesmc driver.

[rydberg@euromail.se: minor cleanup]
Cc: stable@kernel.org
Signed-off-by: Edgar Hucek <gimli@dark-green.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:34 -08:00
Joe Perches
18de030f1d hwmon: (w83627hf) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:33 -08:00
Joe Perches
abdc6fd189 hwmon: (w83627ehf) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:32 -08:00
Joe Perches
9d72be0da1 hwmon: (vt8231) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:31 -08:00
Joe Perches
5ed9ba6b87 hwmon: (vt1211) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:30 -08:00
Joe Perches
774f7827e1 hwmon: (via686a) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:29 -08:00
Joe Perches
edb8d53c68 hwmon: (via-cputemp) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:28 -08:00
Joe Perches
512504e9f5 hwmon: (smsc47m1) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:27 -08:00
Joe Perches
bf1a85eff8 hwmon: (smsc47b397) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:19 -08:00
Joe Perches
4b2515dbb9 hwmon: (sis5595) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:18 -08:00
Joe Perches
14a613cc23 hwmon: (pkgtemp) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:17 -08:00
Joe Perches
2caec1343e hwmon: (pcf8591) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:16 -08:00
Joe Perches
5713017ec5 hwmon: (lm70) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:15 -08:00
Joe Perches
63366d37ad hwmon: (lis3lv02d) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:14 -08:00
Joe Perches
55d705cce8 hwmon: (ibmaem) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:13 -08:00
Joe Perches
c95df1ae69 hwmon: (core) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:11 -08:00
Joe Perches
1f923c7a67 hwmon: (hwmon-vid) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:10 -08:00
Joe Perches
53ab0e6888 hwmon: (hp_accel) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:09 -08:00
Joe Perches
22d3b41281 hwmon: (f71882fg) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:08 -08:00
Joe Perches
e54c5ad61f hwmon: (f71805f) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:07 -08:00
Joe Perches
9c6e13b411 hwmon: (dme1737) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:06 -08:00
Joe Perches
f8bb892568 hwmon: (coretemp) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:05 -08:00
Joe Perches
ac561494d4 hwmon: (asus_atk0110) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:04 -08:00
Joe Perches
4d630e2ba5 hwmon: (asb1000) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:03 -08:00
Joe Perches
2e991201e4 hwmon: (adt7470) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:02 -08:00
Joe Perches
fe826749ae hwmon: (abituguru3) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats
Added a few static strings to standardize logging messages.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:01 -08:00
Joe Perches
28ebfa13f9 hwmon: (abituguru) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats
Added a few static strings to standardize logging messages.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:00 -08:00
Maurus Cuelenaere
b518a64983 hwmon: (s3c-hwmon) Fix compilation
The owner field was removed from struct attribute in
6fd69dc578, so don't assign it anymore.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-02 15:31:11 -08:00
Linus Torvalds
dc99bf7823 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (ltc4215) make sysfs file match the alarm cause
2010-12-14 13:36:26 -08:00
Ira W. Snyder
0a6bf658c3 hwmon: (ltc4215) make sysfs file match the alarm cause
The ltc4215 driver used the chip's "power good" status bit to provide
the power1_alarm file. This is wrong: the chip is really reporting the
status of one of the monitored voltages.

Change the sysfs file from power1_alarm to in2_min_alarm instead. This
matches the voltage that the chip is raising an alarm for.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-12-13 09:54:50 -08:00
Gabriele Gorla
8b0f1840a4 hwmon: (adm1026) Allow 1 as a valid divider value
Allow 1 as a valid div value as specified in the ADM1026 datasheet.

Signed-off-by: Gabriele Gorla <gorlik@penguintown.net>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-12-08 16:27:22 +01:00
Gabriele Gorla
52bc9802ce hwmon: (adm1026) Fix setting fan_div
Prevent setting fan_div from stomping on other fans that share the
same I2C register.

Signed-off-by: Gabriele Gorla <gorlik@penguintown.net>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-12-08 16:27:22 +01:00
Jean Delvare
6229cdb236 hwmon: (it87) Fix manual fan speed control on IT8721F
The manual fan speed control logic of the IT8721F is much different
from what older devices had. Update the code to properly support that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-12-08 16:27:22 +01:00
Guenter Roeck
32292f49f9 hwmon: (lis3lv02d_i2c) Fix compile warnings
This commit fixes the following compile warnings.

From v2.6.37-rc2/m68k/m68k-allmodconfig, v2.6.37-rc2/powerpc/powerpc-randconfig:
drivers/hwmon/lis3lv02d_i2c.c:222: warning: 'lis3_i2c_runtime_suspend' defined but not used
drivers/hwmon/lis3lv02d_i2c.c:231: warning: 'lis3_i2c_runtime_resume' defined but not used

Seen if CONFIG_PM_RUNTIME is not set.

From v2.6.37-rc2/sh4/sh-allyesconfig:
drivers/hwmon/lis3lv02d_i2c.c:191: warning: 'lis3lv02d_i2c_suspend' defined but not used
drivers/hwmon/lis3lv02d_i2c.c:201: warning: 'lis3lv02d_i2c_resume' defined but not used

Seen if CONFIG_PM is set but CONFIG_PM_SLEEP is not.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-22 12:23:39 -08:00
Guenter Roeck
c48a291635 hwmon: (i5k_amb) Fix compile warning
This patch fixes the following compile warning.

drivers/hwmon/i5k_amb.c:500: warning: 'i5k_amb_ids' defined but not used

The warning is seen if the driver is built into the kernel (not as module).

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-22 12:23:39 -08:00
Jean Delvare
52d159eecc hwmon: (w83795) Check for BEEP pin availability
On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.

The W83795G has a dedicated BEEP pin so the functionality is always
available there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:57 +01:00
Jean Delvare
793c51d5fd hwmon: (w83795) Clear intrusion alarm immediately
When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:57 +01:00
Jean Delvare
cf6b9ea661 hwmon: (w83795) Read the intrusion state properly
We can't read the intrusion state from the real-time alarm registers
as we do for all other alarm flags, because real-time alarm bits don't
stick (by definition) and the intrusion state has to stick until
explicitly cleared (otherwise it has little value.)

So we have to use the interrupt status register instead, which is read
from the same address but with a configuration bit flipped in another
register.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
2a2d27da00 hwmon: (w83795) Print the actual temperature channels as sources
Don't expose raw register values to user-space. Decode and encode
temperature channels selected as temperature sources as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
edff2f8d81 hwmon: (w83795) List all usable temperature sources
Temperature sources are not correlated directly with temperature
channels. A look-up table is required to find out which temperature
sources can be used depending on which temperature channels (both
analog and digital) are enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
d5ab845a13 hwmon: (w83795) Expose fan control method
Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
ae51cd9bcd hwmon: (w83795) Fix fan control mode attributes
There were two bugs:
* Speed cruise mode was improperly reported for all fans but fan1.
* Fan control method (PWM vs. DC) was mixed with the control mode.
  It will be added back as a separate attribute, as per the standard
  sysfs interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
61ec2da506 hwmon: (lm95241) Check validity of input values
This clears the following build-time warnings I was seeing:

drivers/hwmon/lm95241.c: In function "set_interval":
drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max2":
drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max1":
drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min2":
drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min1":
drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type2":
drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type1":
drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result

This also fixes a small race in set_interval() as a side effect: by
working with a temporary local variable we prevent data->interval from
being accessed at a time it contains the interval value in the wrong
unit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Davide Rizzo <elpa.rizzo@gmail.com>
2010-11-15 21:38:56 +01:00
Hans J. Koch
2aa25c22c4 hwmon: Change mail address of Hans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-15 21:38:56 +01:00
Axel Lin
4f5b7994f0 hwmon: (gpio-fan) Fix fan_ctrl_init error path
In current implementation, the sysfs entries is not removed before return -ENODEV.

Creating the sysfs attribute should be the last thing done by the function,
after all the rest has been successful.
Otherwise there is a small window during which user-space can access the attribute
but the driver isn't ready to deal with the requests.

Fix it by moving sysfs_create_group to be the last thing done by the function.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-11 09:43:51 -08:00
Axel Lin
f0030d87be hwmon: (ad7414) Return proper error code for ad7414_probe()
Return proper error if i2c_check_functionality reports
the adapter does not support the capability we need.

Also remove unneeded initialization for err variable.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-11 09:32:07 -08:00
Axel Lin
f7334b4ca9 hwmon: (adt7470) Return proper error code for adt7470_probe()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-11 09:32:07 -08:00
Jean Delvare
475200c088 hwmon: (ltc4261) Fix error message format
adapter->id is deprecated and not set by any adapter driver, so this
was certainly not what the author wanted to use. adapter->nr maybe,
but as dev_err() already includes this value, as well as the client's
address, there's no point repeating them. Better print a simple error
message in plain English words.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-05 10:17:19 -07:00
Guenter Roeck
69f8b74193 hwmon: (ltc4261) Add missing newline in debug message
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-05 10:17:19 -07:00
Jean Delvare
44c1bcd4bc hwmon: (it87) Add support for the IT8721F/IT8758E
Add support for the IT8721F/IT8758E. These new chips differ from the
older IT87xxF chips in the following ways:
* ADC LSB is 12 mV instead of 16 mV.
* PWM values are 8-bit instead of 7-bit.
There are other minor changes we don't have to care about in the
driver.

Another change is that we will handle internal voltage scaling in the
driver instead of delegating the work to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare
0df6454da9 hwmon: (it87) Move conversion functions
Move conversion functions until after structure defintions. This is
needed for future changes which make use of the structures in the
conversion funtcions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare
0b22ce3b7d hwmon: Remove many EXPERIMENTAL flags
Remove the dependency on EXPERIMENTAL for all drivers which are in
the kernel tree for a long time, are known to work properly and for
which we have documentation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Juerg Haefliger <juergh@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
f6c61cff8b hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
The ADT7468 supports a high-frequency PWM output mode where all PWM
outputs are driven by a 22.5 kHz clock. Add support for this mode, and
document it, as it may surprise the user that setting one PWM output
frequency also affects the other PWM outputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
c36364dbf3 hwmon: (lm85) Document the ADT7468 as supported
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
fa7a5797e5 hwmon: (lm85) Fix ADT7468 frequency table
The ADT7468 uses the same frequency table as the ADT7463.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
918ee91c07 hwmon: I2C addresses are constant
We can mark normal_i2c const. Almost all drivers do that already, so
fix the 3 remaining ones before they are used as (bad) examples for
new drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: George Joseph <george.joseph@fairview5.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
bd5f47ec96 Move ams driver to macintosh
The ams driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/macintosh seems much more
appropriate, as the driver is only useful on PowerBooks and iBooks.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Stelian Pop <stelian@popies.net>
Cc: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
2010-10-28 20:31:50 +02:00
Jean Delvare
6dfee85397 hwmon: (pcf8591) Don't attempt to detect devices
The PCF8591 can't be detected, don't even try. There are plenty of
other means to instantiate i2c devices these days.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2010-10-28 20:31:50 +02:00
Jean Delvare
4275fcd65d hwmon: (pcf8591) Register as a hwmon device
Register PCF8591 devices as hwmon devices. There's little point in
implementing the standard sysfs interface if we don't register it in
a way libsensors will pick it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2010-10-28 20:31:49 +02:00
Jean Delvare
2437710102 hwmon: (w83795) Use standard attributes for chassis intrusion
Follow the standard attribute naming for the chassis intrusion
feature. I couldn't test the beeping (my board apparently doesn't do
that) but the alarm works fine.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
00030af231 hwmon: (w83795) Exclude fan control feature by default
The fan control feature of the w83795 driver is insufficiently
reviewed and tested for public consumption at this time, so make it
optional and disabled by default. We will change the default when
review and testing is deemed sufficient. Ultimately the option will
go away.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
e3760b432d hwmon: (w83795) Add myself as co-author and maintainer
I've made so many changes to the w83795 driver that it's only fair to
list myself as a co-author. I'll also maintain the driver for some
time. There's more work needed on the driver for sure.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
eb02755a50 hwmon: (w83795) More style cleanups
Cleanups suggested by Guenter Roeck, falling into 4 categories:
* Swapping test orders, because if (var == CONSTANT) is much easier to
  read than if (CONSTANT == var).
* Simplifying comparisons with 0.
* Dropping unneeded masks.
* Dropping unneeded parentheses and curly braces.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
5d2cd958f7 hwmon: (w83795) Fix LSB reading of voltage limits
Wrong index caused the wrong register value to be read, resulting in
random LSB for voltage limits.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:49 +02:00
Jean Delvare
21fc977551 hwmon: (w83795) Use dev_get_drvdata() where possible
When we don't need the client pointer, calling dev_get_drvdata() is
more efficient that calling to_i2c_client() and then
i2c_get_clientdata().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:49 +02:00
Jean Delvare
1bb3450ce5 hwmon: (w83795) Delay reading pwm config registers
Wait until we need the pwm config register values, instead of
pre-reading them. This saves over 1 second on modprobe on my test
system.

Obviously this time is added when first accessing pwm config
attributes, however not everybody will use them, so it seems unfair
to slow down driver loading (and thus boot) for an optional feature.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
2ae61de905 hwmon: (w83795) Delay reading limit registers
Wait until we need the limit register values, instead of pre-reading
them. This saves 544 ms on modprobe on my test system. Obviously this
time is added when first running "sensors" or any other monitoring
application, but I think it is better than slowing down the boot.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
0d7237bfd1 hwmon: (w83795) Move register reads to dedicated functions
Move initial register reads out of probe, to dedicated functions.
This makes the code clearer, and will be needed if we want to delay
calling these functions until they are needed, or want to call them
periodically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:48 +02:00
Jean Delvare
476a4e5d37 hwmon: (w83795) Pack similar register reads
Pack similar register reads using for loops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
fd7f82b8a3 hwmon: (w83795) Make W83795_REG_PWM more efficient
Cascaded conditionals are inefficient. Reorder the fields so that
PWM register addresses can be computed more efficiently.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:48 +02:00
Jean Delvare
5f7b77cbd4 hwmon: (w83795) Don't pre-read values we'll update later
There is no point in reading registers during initialization if we
will refresh the values in the update function later. This is only
slowing down the driver loading with no benefit, stop doing it.
This change saves 480 ms on driver load on my test system.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
39deb6993e hwmon: (w83795) Simplify temperature sensor type handling
All 3 temperature sensor type sysfs functions (show_temp_mode,
store_temp_mode and show_dts_mode) can be simplified. We don't
create these files when the correponding input isn't in temperature
monitoring mode, so there is no point in handling that case.
Likewise, we don't allow changing inputs from temperature to voltage,
so the code handling this case is dead and can be removed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
cd316df582 hwmon: (w83795) Drop _NUM constants
Consistently use ARRAY_SIZE() to control for loops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
49c7347a44 hwmon: (w83795) Drop REST_VLT_BEGIN/END
Get rid of REST_VLT_BEGIN and REST_VLT_END, they don't make the code
more readable.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
7eb8d508b5 hwmon: (w83795) Fix parity checks
x % 1 is obviously wrong, as it always evaluates to 0. You want
x % 2, or x & 1, for parity checking.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
a654b9d4e7 hwmon: (w83795) Get rid of VRLSB_SHIFT
VRLSB_SHIFT is a non-sense, the actual shift depends on the sensor
type (fans need 4, other sensors need 6). Get rid of it to prevent
any confusion. Also get rid of the useless masking, the meaningful
bits are always the MSb so there's nothing to mask out after
shifting.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
c1a792a6ee hwmon: (w83795) Avoid reading the same register twice
Shorten driver load time by avoiding duplicate register access during
initialization. This saves 112 ms on modprobe on my test system.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
02728ffef9 hwmon: (w83795) Rework beep_enable implementation
Handle beep_enable just like all other beep bits. It doesn't need
anything special, so let's avoid redundant code. This also saves a
duplicate register read at initialization time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
54891a3c13 hwmon: (w83795) Report PECI agent Tbase values
On systems with PECI, report PECI agent Tbase temperature values.
This is informative only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
dd127f5ccd hwmon: (w83795) Properly handle negative temperatures
The temperature registers hold regular 2's complement values, no need
to add any arithmetics.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
a0ce402fb0 hwmon: (w83795) Rename temperature limit attributes
Follow the standard for temperature limit attribute naming, so that
libsensors will pick the values.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
01879a855f hwmon: (w83795) Fix PWM duty cycle frequency attributes
The PWM duty cycle frequenty attributes are improperly named
(fanN_div instead of pwmN_div) and contain raw values instead of
actual frequencies. Rename them and fix their contents.

Also improve the logic when the user asks for a new frequency, to
always pick the closest supported frequency. The algorithm could
certainly be optimized, but the operation is infrequent enough that
I don't think it's worth the effort.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
0e256018b0 hwmon: (w83795) Add support for dynamic in0-2 limits
The W83795G can be configured to set the in0, in1 and/or in2 voltage
limits dynamically based on VID input pins. Switch the respective
sysfs attributes to read-only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
6c82b2f3fb hwmon: (w83795) Fix LSB reading of fan speeds
Misplaced parentheses caused the wrong register value to be read,
resulting in random LSB for fan speed values and limits.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
71caf46fbf hwmon: (w83795) Clean up probe function
* The data structure is zalloc'd, so no need to set individual fields
  to 0 explicitly.
* Refactor the handling of pins that can be used for either
  temperature or voltage monitoring.
* Misc other clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
6f9dfd85f7 hwmon: (w83795) Fix in17-in20 gain factor
Gain bit set means 1x gain and cleared means 8x gain, not the other
way around.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
80646b9586 hwmon: (w83795) Only start monitoring if needed
This saves an SMBus write if monitoring was already enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
86ef4d2fd5 hwmon: (w83795) Add const markers
Attribute structures can be made const. Same for the I2C address
list.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
b2cc528e58 hwmon: (w83795) Only create fan[1-8]_target files when needed
Only create fan[1-8]_target files when the fan in question can be
controlled (PWM output is present.) Also name these files according
to the standard.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
b5f6a90a0b hwmon: (w83795) Move PWM attributes to a dedidated array
Use a dedicated 2D array for PWM attributes. This way, PWM attributes
are handled the same way as other attributes, this is more consistent.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
87df0dad3e hwmon: (w83795) Use 2D arrays for many device attributes
Use 2D arrays for in, fan, temp and dts device attributes. Using
linear arrays is too risky as we have to skip some groups depending
on the device model and configuration. Adding or removing an
attribute would let the driver build silently but then it would crash
at runtime. With 2D arrays, the consistency checking happens at build
time, which is much safer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
6f3dcde9c6 hwmon: (w83795) Merge w83795_create_files and w83795_remove_files
Functions w83795_create_files and w83795_remove_files iterate over
the same set of files, just calling a different function. Merge them
into a single function which takes the action as a parameter. This
saves code, and also ensure that file creation and deletion are in
sync.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
892514a637 hwmon: (w83795) Move file creation to a separate function too
Function w83795_probe() is way too big, move file creation to a separate
function to make it more readable.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
2fa09878ba hwmon: (w83795) Move files removal to a separate function
Sysfs files must be removed on device removal but also when device
registration fails. Move the code to a separate function to avoid
code redundancy.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
2be381de0f hwmon: (w83795) Improve detection routine
Check for additional identification registers. Improve debugging
messages on failed detection.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
b2469f422f hwmon: (w83795) Refactor bank selection
Move the bank selection code to a separate function, to avoid
duplicating it in read and write functions. Improve error reporting
on register access error.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
093d1a4794 hwmon: (w83795) Drop duplicate enum
Enum chips and chip_types are redundant, get rid of the former. Fix
the detection code to properly identify the chip variant and name the
client accordingly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
315bacfdbe hwmon: (w83795) Misc cleanups
* Improve driver description.
* Drop unused macro.
* Drop unreachable code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Wei Song
792d376b4f hwmon: New driver for the W83795G/ADG monitoring chips
There is still much work needed, but I wanted to give Wei the credit
he deserves. I've merged some of my own fixes already, to make
gcc and checkpatch happy. Individual fixes and improvements from me
will follow.

[JD: Fix build errors]
[JD: Coding style cleanups]
[JD: Get rid of forward declarations]
[JD: Drop VID support]
[JD: Drop fault output control feature]
[JD: Use lowercase for inline function names]
[JD: Use strict variants of the strtol/ul functions]
[JD: Shorten the read and write function names]

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Maurus Cuelenaere
62991f7ab3 hwmon: (s3c-hwmon) Depend on S3C_ADC
This way we don't need to modify Kconfig every time a new SoC comes along to
make this driver support it. Also fix some typos while I'm at it.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Thomas Gleixner
9c627e3be3 hwmon: (s3c-hwmon) Use a real mutex
The semaphore which protects the ADC is semantically a mutex. Use a
real mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Shubhrajyoti D
caaa0f36c3 hwmon: (lm75) Trivial changes to pacify the checkpatch
Some trivial changes to pacify the checkpatch.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Shubhrajyoti D
e3cd9528af hwmon: (lm75) Make the writing to sysfs more robust
Currently we get the checkpatch warning
consider using strict_strtol in preference to simple_strtol.
Also we should not allow any partially numeric values.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Jean Delvare
c4f99a2b8f hwmon: (lm90) Add support for the W83L771W/G
I was wondering if that chip ever existed publicly... Apparently yes,
so add support for it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:44 +02:00
Guenter Roeck
0c01b644f7 hwmon: (lm90) Add support for update_interval sysfs attribute
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Guenter Roeck
1179324c41 hwmon: (lm90) Introduce capability flag to indicate broken ALERT functionality
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Guenter Roeck
4667bcb8d8 hwmon: (lm90) Introduce chip parameter structure
Instead of using switch/case and if statements in probe, define chip specific
functionality in a parameter structure array.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
15b66ab690 hwmon: (lm90) Rearrange code to no longer require forward declarations
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
06e1c0a216 hwmon: (lm90) Add support for max6695 and max6696
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
6948708dd0 hwmon: (lm90) Add support for extra features of max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
13c84951a3 hwmon: (lm90) Add explicit support for max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
96512861c3 hwmon: (lm90) Simplify set_temp11 register calculations
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
b6fc1bacc7 hwmon: (lm90) Introduce function to delete sysfs files
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
88073bb1ba hwmon: (lm90) Introduce device feature bits
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
11e578129a hwmon: (lm90) Fix checkpatch errors
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:42 +02:00
Andreas Herrmann
628b4504cf hwmon: (k8temp) Remove superfluous CPU family check
The family check in k8temp is not required because the driver is
already bound to a northbridge device only used with K8 CPUs.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:42 +02:00
Samu Onkalo
b11e7b3f3b hwmon: lis3: Release resources in case of failure
If lis3lv02d_init_device fails, HW resources were not released
properly. In case of failure call release_resources if available.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:44:59 -07:00
Samu Onkalo
029756d0b8 hwmon: lis3: Enhance lis3 selftest with IRQ line test
Configure chip to data ready mode in selftest and count received
interrupts to see that interrupt line(s) are working.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:39 -07:00
Samu Onkalo
f10a5407b5 hwmon: lis3: use block read to access data registers
Add optional blockread function to interface driver. If available
the chip driver uses it for data register access. For 12 bit device
it reads 6 bytes to get 3*16bit data. For 8 bit device it reads out
5 bytes since every second byte is dummy.
This optimizes bus usage and reduces number of operations and
interrupts needed for one data update.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:39 -07:00
Samu Onkalo
477bc918c2 hwmon: lis3: Adjust fuzziness for 8 bit device
Default fuziness is set smaller for 8 device.
In 12 bit device LSB is quite close to 1 mg
(mg = 1 / 1000 of earth gravity).
In 8bit device LSB is about 18 mg.
Set fuziness to 1 for 8 bit device.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:39 -07:00
Samu Onkalo
cc23aa1ce2 hwmon: lis3: New parameters to platform data
Added default output data rate setting to platform data.
If default rate is 0, reset default value is used.
Added control for duration via platform data.
Added possibility to configure interrupts to trig on
both rising and falling edge. The lis3 WU unit can be
configured quite many ways and with some configurations it
is quite handy to get coordinate refresh when some
event trigs and when it reason goes away.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:38 -07:00
Samu Onkalo
ed37d7f619 hwmon: lis3: restore axis enabled bits
All axis enable bits are set to 0 at module remove.
Restore reset default value at init.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:38 -07:00
Samu Onkalo
2a7fade7e0 hwmon: lis3: Power on corrections
Sometimes lis3 chip seems to fail to setup factory tuning at boot up.
This probably happens if there is some odd power ramp down ramp up sequence
for example in device restart. Set boot bit in control2 register to
trig boot sequence manually and wait until it is finished.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:38 -07:00
Samu Onkalo
821f664644 hwmon: lis3: Update coordinates at polled device open
Call input device poll function at device open to refresh coordinates
immediately. This is needed for the case where poll interval is set to
zero and coordinate updates happens purely under interrupt control.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:38 -07:00
Samu Onkalo
e726111f95 hwmon: lis3: Cleanup interrupt handling
Irqcfg moved to chip data instead of platform data.
This simplifies access in interrupt handler little bit.

Input device open and close functions set status for
interrupt threaded handler once.

Unnecessary check for interrupt source removed since
it is enough that active interrupt line indicates that
there was an interrupt.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:38 -07:00