Commit graph

2024 commits

Author SHA1 Message Date
Lars Ellenberg
e99dc367b3 drbd: kill dead code
This code became obsolete and unused last December with
 drbd: bitmap keep track of changes vs on-disk bitmap

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:12 +01:00
Lars Ellenberg
10f6d9926c drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails
Just deal with it more gracefully, if we fail to add even a single page
to an empty bio. We used to BUG_ON() there, but it has been observed in
some Xen deployment, so we need to handle that case more robustly now.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:10 +01:00
Philipp Reisner
039312b648 drbd: Removed left over, now wrong comments
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:09 +01:00
Lars Ellenberg
873b0d5f98 drbd: serialize admin requests for new verify run with pending bitmap io
This is an addendum to
 drbd: serialize admin requests for new resync with pending bitmap io

It avoids a race that could trigger "FIXME" assert log messages.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:07 +01:00
Lars Ellenberg
e636db5b95 drbd: fix potential imbalance of ap_in_flight
When we receive a barrier ack, we walk the ring list of drbd requests
in the transfer log of the respective epoch, do some housekeeping,
and free those objects.

We tried to keep epochs of mirrored and unmirrored drbd requests
separate, and assert that no local-only requests are present in a
barrier_acked epoch.

It turns out that this has quite a number of corner cases and would
add bloated code without functional benefit.

We now revert the (insufficient) commits
 drbd: Fixed an issue with AHEAD -> SYNC_SOURCE transitions
 drbd: Ensure that an epoch contains only requests of one kind
and instead fix the processing of barrier acks to cope with
a mix of local-only and mirrored requests.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:06 +01:00
Lars Ellenberg
0ddc5549f8 drbd: silence some noisy log messages during disconnect
If we fail to send the information that we lost our disk,
we have no connection, and no disk: no access to data anymore.
That is either expected (deconfiguration), or there will be so much
noise in the logs that "Sending state failed" is not useful at all.
Drop it.

If the reason for a shorter than expected receive was a signal,
which we sent because we already decided to disconnect,
these additional log messages are confusing and useless.

This patch follows this pattern:
 - dev_warn(DEV, "short read expecting header on sock: r=%d\n", r);
 + if (!signal_pending(current))
 + 	dev_warn(DEV, "short read expecting header on sock: r=%d\n", r);

Also make them all dev_warn for consistency.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:04 +01:00
Lars Ellenberg
20ceb2b22e drbd: describe bitmap locking for bulk operation in finer detail
Now that we do no longer in-place endian-swap the bitmap, we allow
selected bitmap operations (testing bits, sometimes even settting bits)
during some bulk operations.

This caused us to hit a lot of FIXME asserts similar to
	FIXME asender in drbd_bm_count_bits,
	bitmap locked for 'write from resync_finished' by worker
Which now is nonsense: looking at the bitmap is perfectly legal
as long as it is not being resized.

This cosmetic patch defines some flags to describe expectations in finer
detail, so the asserts in e.g. bm_change_bits_to() can be skipped if
appropriate.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:02 +01:00
Lars Ellenberg
62b0da3a24 drbd: log UUIDs whenever they change
All decisions about sync, sync direction, and wether or not to
allow a connect or attach are based on our set of UUIDs to tag a
data generation.

Log changes to the UUIDs whenever they occur,
logging "new current UUID P:Q:R:S" is more useful
than "Creating new current UUID".

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:48:01 +01:00
Philipp Reisner
d07c9c10e5 drbd: We can not process BIOs with a size of 0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:47:59 +01:00
Philipp Reisner
cd88d030d4 drbd: Provide hints with the error message when clearing the sync pause flag
When the user clears the sync-pause flag, and sync stays in pause
state, give hints to the user, why it still is in pause state.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:47:58 +01:00
Lars Ellenberg
79a30d2d71 drbd: queue bitmap writeout more intelligently
The "lazy writeout" of cleared bitmap pages happens during resync, and
should happen again once the resync finishes cleanly, or is aborted.

If resync finished cleanly, or was aborted because of peer disk
failure, we trigger the writeout from worker context in the after
state change work.

If resync was aborted because of connection failure, we should not
immediately trigger bitmap writeout, but rather postpone the
writeout to after the connection cleanup happened.  We now do it
in the receiver context from drbd_disconnect().

If resync was aborted because of local disk failure, well, there
is nothing to write to anymore.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:47:56 +01:00
Lars Ellenberg
54b956abef drbd: don't pointlessly queue bitmap send, if we lost connection
This is a minor optimization and cleanup,
and also considerably reduces some harmless (but noisy) race with
the connection cleanup code.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:47:55 +01:00
Lars Ellenberg
194bfb32db drbd: serialize admin requests for new resync with pending bitmap io
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:47:53 +01:00
Lars Ellenberg
6c922ed543 drbd: only generate and send a new sync uuid after a successful state change
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:47:52 +01:00
Philipp Reisner
20ee639024 drbd: cleaned up __set_current_state() followed by schedule_timeout() calls
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:47:42 +01:00
Philipp Reisner
6a35c45f89 drbd: Ensure that an epoch contains only requests of one kind
The assert in drbd_req.c:755 forces us to have only requests of
one kind in an epoch. The two kinds we distinguish here are:
local-only or mirrored.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:42 +01:00
Philipp Reisner
2deb8336d0 drbd: Fixed P_NEG_ACK processing for protocol A and B
Protocol A has no P_WRITE_ACKs, but has P_NEG_ACKs.
The master bio might already be completed, therefore the
request is no longer in the collision hash.
=> Do not try to validate block_id as request

In Protocol B we might already have got a P_RECV_ACK
but then get a P_NEG_ACK after wards.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:40 +01:00
Philipp Reisner
94f2b05f03 drbd: Killed an assert that is no longer valid
The point is that drbd_disconnect() can be called with a cstate of
WFConnection.

That happens if the user issues "drbdsetup disconnect" while the
drbd_connect() function executes. Then drbdd_init() will call
drbdd(), which in turn will return without receiving any
packets. Then drbdd_init() will end up calling drbd_disconnect()
with a cstate of WFConnection.

Bottom line: This assertion is wrong as it is, and we do not
see value in fixing it. => Removing it.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:39 +01:00
Philipp Reisner
148efa165e drbd: Do not drop net config if sending in drbd_send_protocol() fails
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:37 +01:00
Philipp Reisner
370a43e798 drbd: Work on the Ahead -> SyncSource transition
The test if rs_pending_cnt == 0 was too weak. Using Test for
unacked_cnt == 0 instead. Moved that into the worker.

Since unacked_cnt gets already increased when an P_RS_DATA_REQ
comes in.

Also using a timer to make Ahead -> SyncSource -> Ahead cycles
slower...

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:36 +01:00
Philipp Reisner
71c78cfba2 drbd: Nothing should stop SyncSource -> Ahead transitions
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:34 +01:00
Philipp Reisner
4a23f26496 drbd: Do not full sync if a P_SYNC_UUID packet gets lost
See also commit from 2009-08-15
"drbd_uuid_compare(): Do not full sync in case a P_SYNC_UUID packet gets lost."

We saw cases where the History UUIDs where not as expected. So the
detection of the special case did not trigger. With the sync UUID
no longer being a random number, but deducible from the previous
bitmap UUID, the detection of this special case becomes more
reliable.

The SyncUUID now is the previous bitmap UUID + 0x1000000000000.

Rule 5a:
Cs = H1p & H1p + Offset = Bp
  Connection was lost before SyncUUID Packet came through.
  Corrent (peer) UUIDs:
   Bp = H1p
   H1p = H2p
   H2p = 0
  Become Sync target.

Rule 7a:
Cp = H1s & H1s + Offset = Bs
  Connection was lost before SyncUUID Packet came through.
  Correct (own) UUIDs:
   Bs = H1s
   H1s = H2s
   H2s = 0
  Become Sync source.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:32 +01:00
Philipp Reisner
2b8a90b555 drbd: Corrected off-by-one error in DRBD_MINOR_COUNT_MAX
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:31 +01:00
Andreas Gruenbacher
110a204a35 drbd: Remove useless / wrong comments
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:29 +01:00
Philipp Reisner
794abb753e drbd: Cleaned up the resync timer logic
Besides removed a few lines of code, this moves the inspection
of the state from before the queuing process to after the queuing.
I.e. more closely to the actual invocation of the work.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:28 +01:00
Philipp Reisner
da0a78161d drbd: Be more careful with SyncSource -> Ahead transitions
We may not get from SyncSource to Ahead if we have sent some
P_RS_DATA_REPLY packets to the peer and are waiting for
P_WRITE_ACK.

Again, this is not relevant for proper tuned systems, but makes
sure that the not-tuned system does not get diverging bitmaps.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:26 +01:00
Philipp Reisner
d612d309e4 drbd: No longer answer P_RS_DATA_REQUEST packets when in C_AHEAD mode
When the sync source node replies to a P_RS_DATA_REQUEST packet
when it is already in ahead mode. I.e. those two packets
crossed each other on the wire, that may lead to diverging
bitmaps.

  This never happens in a well-tuned-system. In a well-tuned-
  system the resync controller has reduced the resync speed
  to zero long before we got into ahead-mode.

But we have to be prepared for the not-well-tuned-system
of course as well.
Because -> diverging bitmaps = non terminating resync.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:25 +01:00
Philipp Reisner
617049aa7d drbd: Fixed an issue with AHEAD -> SYNC_SOURCE transitions
Create a new barrier when leaving the AHEAD mode.

  Otherwise we trigger the assertion in req_mod(, barrier_acked)
  D_ASSERT(req->rq_state & RQ_NET_SENT);

The new barrier is created by recycling the newest existing one.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:23 +01:00
Lars Ellenberg
0719427278 drbd: ratelimit io error messages
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:21 +01:00
Philipp Reisner
3f98688afc drbd: There might be a resync after unfreezing IO due to no disk [Bugz 332]
When on-no-data-accessible is set to suspend-io, also consider that
a Primary, SyncTarget node losses its connection.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:20 +01:00
Lars Ellenberg
725a97e43e drbd: fix potential access of on-stack wait_queue_head_t after return
I run into something declaring itself as "spinlock deadlock",
 BUG: spinlock lockup on CPU#1, kjournald/27816, ffff88000ad6bca0
 Pid: 27816, comm: kjournald Tainted: G        W 2.6.34.6 #2
 Call Trace:
  <IRQ>  [<ffffffff811ba0aa>] do_raw_spin_lock+0x11e/0x14d
  [<ffffffff81340fde>] _raw_spin_lock_irqsave+0x6a/0x81
  [<ffffffff8103b694>] ? __wake_up+0x22/0x50
  [<ffffffff8103b694>] __wake_up+0x22/0x50
  [<ffffffffa07ff661>] bm_async_io_complete+0x258/0x299 [drbd]
but the call traces do not fit at all,
all other cpus are cpu_idle.

I think it may be this race:

drbd_bm_write_page
 wait_queue_head_t io_wait;
 atomic_t in_flight;
 bm_async_io
  submit_bio
					bm_async_io_complete
					  if (atomic_dec_and_test(in_flight))
 wait_event(io_wait,
	atomic_read(in_flight) == 0)
 return
					    wake_up(io_wait)

The wake_up now accesses the wait_queue_head_t spinlock, which is no
longer valid, since the stack frame of drbd_bm_write_page has been
clobbered now.

Fix this by using struct completion, which does both the condition test
as well as the wake_up inside its spinlock, so this race cannot happen.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:45:08 +01:00
Lars Ellenberg
06d33e968d drbd: improve on bitmap write out timing
Even though we now track the need for bitmap writeout per bitmap page,
there is no need to trigger the writeout while a resync is going on.

Once the resync is finished (or aborted),
we trigger bitmap writeout anyways.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:40 +01:00
Lars Ellenberg
418e0a927d drbd: spelling fix in log message
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:38 +01:00
Lars Ellenberg
7648cdfe52 drbd: be less noisy with some log messages
We expect changes to a bitmap page in drbd_bm_write_page,
that's why we submit a copy page.

If a page changes during global writeout, that would be unexpected,
and reason to warn, though.

Also, often page writeout can be skipped (on activity log transactions
during normal operation, for example), no need to log that everytime.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:37 +01:00
Lars Ellenberg
5a22db8968 drbd: serialize sending of resync uuid with pending w_send_oos
To improve the latency of IO requests during bitmap exchange,
we recently allowed writes while waiting for the bitmap, sending "set
out-of-sync" information packets for any newly dirtied bits.

We have to make sure that the new resync-uuid does not overtake
these "set oos" packets. Once the resync-uuid is received, the
sync target starts the resync process, and expects the bitmap to
only be cleared, not re-set.

If we use this protocol extension, we queue the generation and sending
of the resync-uuid on the worker, which naturally serializes with all
previously queued packets.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:35 +01:00
Lars Ellenberg
f735e36354 drbd: add debugging assert to make sure the protocol is clean
We expect to only receive the recently introduced "set out of sync"
packets in specific states. If we receive them in different states, that
may confuse the resync process to the point where it won't terminate, or
think it made negative progress.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:34 +01:00
Philipp Reisner
c88d65e223 drbd: Documenting drbd_should_do_remote() and drbd_should_send_oos()
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:32 +01:00
Lars Ellenberg
2265b473ae drbd: fix potential dereference of NULL pointer
If drbd used to have crypto digest algorithms configured, then is being
unconfigured (but not unloaded), it frees the algorithms, but does not
reset the config.  If it then is reconfigured to use the very same
algorithm, it "forgot" to re-allocate the algorithms, thinking that the
config has not changed in that aspect.
It will then Oops on the first attempt to actually use those algorithms.

Fix this by resetting the config to defaults after cleanup.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:30 +01:00
Lars Ellenberg
02851e9f00 drbd: move bitmap write from resync_finished to after_state_change
We must not call it directly from resync_finished,
as we may be in either receiver or worker context there.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:29 +01:00
Lars Ellenberg
84e7c0f7d1 drbd: Removed a reference to debug macros removed long time ago
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:27 +01:00
Lars Ellenberg
6850c44214 drbd: get rid of unused debug code
Long time ago, we had paranoia code in the bitmap that allocated one
extra word, assigned a magic value, and checked on every occasion that
the magic value was still unchanged.

That debug code is unused, the extra long word complicates code a bit.
Get rid of it.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:26 +01:00
Lars Ellenberg
4b0715f096 drbd: allow petabyte storage on 64bit arch
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:24 +01:00
Lars Ellenberg
19f843aa08 drbd: bitmap keep track of changes vs on-disk bitmap
When we set or clear bits in a bitmap page,
also set a flag in the page->private pointer.

This allows us to skip writes of unchanged pages.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:43:19 +01:00
Lars Ellenberg
95a0f10cdd drbd: store in-core bitmap little endian, regardless of architecture
Our on-disk bitmap is a little endian bitstream.
Up to now, we have stored the in-core copy of that in
native endian, applying byte order conversion when necessary.

Instead, keep the bitmap pages little endian, as they are read from disk,
and use the generic_*_le_bit family of functions.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:40 +01:00
Lars Ellenberg
7777a8ba1f drbd: bitmap: don't count unused bits (fix non-terminating resync)
We trusted the on-disk bitmap to have unused bits cleared.
In case that is not true for whatever reason,
and we take a code path where the unused bits don't get cleared
elsewhere (bm_clear_surplus is not called), we may miscount the bits,
and get confused during resync, waiting for bits to get cleared that we
don't even use: the resync process would not terminate.

Fix this by masking out unused bits in __bm_count_bits.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:38 +01:00
Andreas Gruenbacher
1b881ef775 drbd: Rename __inc_ap_bio_cond to may_inc_ap_bio
The old name is confusing: the function does not increment anything.
Also rename _inc_ap_bio_cond to inc_ap_bio_cond: there is no need for
an underscore.
Finally, make it clear that these functions return boolean values.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:37 +01:00
Andreas Gruenbacher
24dccabb39 drbd: Fix: drbd_bitmap_io does not return an enum determine_dev_size
I guess bitmap I/O errors are supposed to cause drbd_determin_dev_size
to return dev_size_error.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:35 +01:00
Andreas Gruenbacher
2c46407d24 drbd: receive_bitmap_plain: Get rid of ugly and useless enum
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:34 +01:00
Andreas Gruenbacher
f70af118e3 drbd: send_bitmap_rle_or_plain: Get rid of ugly and useless enum
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:32 +01:00
Andreas Gruenbacher
78fcbdae22 drbd: receive_bitmap: Missing free_page() on error path
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:30 +01:00
Andreas Gruenbacher
de1f8e4a0a drbd: receive_bitmap: Avoid casting enum drbd_state_rv to int
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:29 +01:00
Andreas Gruenbacher
4114be815f drbd: receive_bitmap: Fix the wrong return value
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:27 +01:00
Andreas Gruenbacher
f2024e7ce2 drbd: drbd_nl_disk_conf: Avoid a compiler warning
Warning: comparison between ‘enum drbd_ret_code’ and ‘enum drbd_state_rv’

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:26 +01:00
Andreas Gruenbacher
81e84650c2 drbd: Use the standard bool, true, and false keywords
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:24 +01:00
Andreas Gruenbacher
6184ea2145 drbd: This code is dead now
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:22 +01:00
Andreas Gruenbacher
bb4379464e drbd: Another small enum drbd_state_rv cleanup
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:21 +01:00
Andreas Gruenbacher
bf885f8a67 drbd: Be more explicit about functions that return an enum drbd_state_rv
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:19 +01:00
Andreas Gruenbacher
c8b325632f drbd: Rename enum drbd_state_ret_codes to enum drbd_state_rv
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:18 +01:00
Andreas Gruenbacher
116676ca62 drbd: Rename enum drbd_ret_codes to enum drbd_ret_code
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:16 +01:00
Andreas Gruenbacher
0cf9d27e38 drbd: Get rid of unnecessary macros (2)
The FAULT_ACTIVE macro just wraps the drbd_insert_fault macro for no
apparent reason.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:15 +01:00
Andreas Gruenbacher
662d91a23a drbd: Get rid of unnecessary macros (1)
This macro doesn't save much code, but makes things a lot harder to read.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:13 +01:00
Andreas Gruenbacher
2f58dcfc85 drbd: Rename drbd_make_request_26 to drbd_make_request
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:11 +01:00
Andreas Gruenbacher
96756784a6 drbd: Remove left-over prototype
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:10 +01:00
Andreas Gruenbacher
cab2f74b45 drbd: Make sure that drbd_send() has sent the right number of bytes
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2011-03-10 11:36:08 +01:00
Lars Ellenberg
220df4d006 drbd: fix incomplete error message
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:36:02 +01:00
Andreas Gruenbacher
7e458c32da drbd: Removed an unnecessary #undef
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:22 +01:00
Lars Ellenberg
8a3c104438 drbd: fix regression, we need to close drbd epochs during normal operation
commit e2041475e6ddb081734d161f6421977323f5a9b9
drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmap

Contained a bad chunk that tried to optimize away drbd barriers during
bitmap exchange, but accidentally dropped them for normal mode as well.

Impact: depending on activity log size and access pattern, activity log
extents may not be recycled in time, causeing IO to block indefinetely.

Fix: skip drbd barriers only if there is no connection to send them on,
or the request being completed has not been on the network at all.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:20 +01:00
Philipp Reisner
09b9e79793 drbd: Implemented the before-resync-source handler
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:18 +01:00
Philipp Reisner
2561b9c1f1 drbd: --force option for disconnect
As the network connection can be lost at any time, a --force option
for disconnect is just a matter of completeness.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:17 +01:00
Lars Ellenberg
42ff269d10 drbd: add packet_type 27 (return_code_only) to netlink api
In case we ever should add an other packet type,
we must not reuse 27, as that currently used for
"empty" return code only replies.
Document it as such.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:15 +01:00
Lars Ellenberg
3e3a7766c2 drbd: use kzalloc and memset(,0,) to start with clean buffers in drbd_nl
Make sure we start with clean buffers to not accidentally send garbage
back to userspace. Note: has not been observed; but just in case.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:14 +01:00
Lars Ellenberg
17a93f3007 drbd: remove /proc/drbd before unregistering from netlink
There still exists a (theoretical) race on module unload, where
/proc/drbd may still exist, but the netlink callback has been
unregistered already, allowing drbdsetup to shout without listeners,
and get no reply.

Reorder remove_proc_entry and unregister of netlink callback.
drbdsetup first checks for existence of the proc entry,
and if that is missing, won't even try to contact the module.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:12 +01:00
Lars Ellenberg
3da127fa88 drbd: increase module count on /proc/drbd access
If someone holds /proc/drbd open, previously rmmod would
"succeed" in starting the unload, but then block on remove_proc_entry,
leading to a situation where the lsmod does not show drbd anymore,
but /proc/drbd being still there (but no longer accessible).

I'd rather have rmmod fail up front in this case.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:11 +01:00
Philipp Reisner
c507f46f26 drbd: Removed 20 seconds upper bound for side-stepping
Given low-enough network bandwidth combined with a IO
pattern that hammers onto a single RS-extent, side-stepping
might be necessary for much longer times.

Changed the code to print a single informal message after
20 seconds, but it keeps on stepping aside forever.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:09 +01:00
Philipp Reisner
1fc80cf378 drbd: Becoming sync target may not happen out of < C_WF_REPORT_PARAMS
This patch is acutally a necessary addendum to the patch
"fix for spurious full sync (becoming sync target looked like invalidate)"

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:07 +01:00
Philipp Reisner
3719094ec2 drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmap
* C_STARTING_SYNC_S, C_STARTING_SYNC_T In these states the bitmap gets
  written to disk. Locking out of app-IO is done by using the
  drbd_queue_bitmap_io() and drbd_bitmap_io() functions these days.
  It is no longer necessary to lock out app-IO based on the connection
  state.
  App-IO that may come in after the BITMAP_IO flag got cleared before the
  state transition to C_SYNC_(SOURCE|TARGET) does not get mirrored, sets
  a bit in the local bitmap, that is already set, therefore changes nothing.

* C_WF_BITMAP_S In this state we send updates (P_OUT_OF_SYNC packets).
  With that we make sure they have the same number of bits when going
  into the C_SYNC_(SOURCE|TARGET) connection state.

* C_UNCONNECTED: The receiver starts, no need to lock out IO.

* C_DISCONNECTING: in drbd_disconnect() we had a wait_event()
  to wait until ap_bio_cnt reaches 0. Removed that.

* C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE
  C_PROTOCOL_ERROR, C_TEAR_DOWN: Same as C_DISCONNECTING

* C_WF_REPORT_PARAMS: IO still possible since that is still
  like C_WF_CONNECTION.

And we do not need to send barriers in C_WF_BITMAP_S connection state.

Allow concurrent accesses to the bitmap when receiving the bitmap.
Everything gets ORed anyways.

A drbd_free_tl_hash() is in after_state_chg_work(). At that point
all the work items of the last connections must have been processed.

Introduced a call to drbd_free_tl_hash() into drbd_free_mdev()
for paranoia reasons.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:06 +01:00
Philipp Reisner
ab17b68f45 drbd: Improvements in sanitize_state()
The relevant change is that the state change to C_FW_BITMAP_S should
implicitly change pdsk to C_CONSISTENT. (Think of it as C_OUTDATED, only
without the guarantee that the peer has the outdated written to its
meta data)

At that opportunity I restructured the switch statement so that it
gets evaluated every time. (Has declarative character)

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:04 +01:00
Philipp Reisner
22afd7ee94 drbd: Fixed race condition in drbd_queue_bitmap_io
May only test for ap_bio_cnt == 0 under req_lock. It can increase
only under req_lock.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:03 +01:00
Philipp Reisner
8869d683b7 drbd: Fixed inc_ap_bio()
The condition must be checked after perpare_to_wait(). The old
implementaion could loose wakeup events. Never observed in real
life.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:35:01 +01:00
Philipp Reisner
127b317844 drbd: use test_and_set_bit() to decide if bm_io_work should be queued
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:59 +01:00
Philipp Reisner
aeda1cd6a5 drbd: Begin to account BIO processing time before inc_ap_bio()
Since inc_ap_bio() might sleep already

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:57 +01:00
Philipp Reisner
f91ab6282d drbd: Implemented side-stepping in drbd_res_begin_io()
Before:
  drbd_rs_begin_io() locked app-IO out of an RS extent, and
  waited then until all previous app-IO in that area finished.
  (But not only until the disk-IO was finished but until the
   barrier/epoch ack came in for that == round trip time latency ++)

After:
  As soon as a new app-IO waits wants to start new IO on that
  RS extent, drbd_rs_begin_io() steps aside (clearing the
  BME_NO_WRITES flag again). It retries after 100ms.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:56 +01:00
Philipp Reisner
9d77a5fee9 drbd: Make some functions static
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:54 +01:00
Philipp Reisner
e3555d8545 drbd: Implemented priority inheritance for resync requests
We only issue resync requests if there is no significant application IO
going on. = Application IO has higher priority than resnyc IO.

If application IO can not be started because the resync process locked
an resync_lru entry, start the IO operations necessary to release the
lock ASAP.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:53 +01:00
Philipp Reisner
59817f4fab drbd: Do not cleanup resync LRU for the Ahead/Behind SyncSource/SyncTarget transitions
This one should be replaced with moving this cleanup to the
'right' position.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:51 +01:00
Philipp Reisner
c4752ef128 drbd: When proxy's buffer drained off go into regular resync mode
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:49 +01:00
Philipp Reisner
73a01a18b9 drbd: New packet for Ahead/Behind mode: P_OUT_OF_SYNC
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:48 +01:00
Philipp Reisner
67531718d8 drbd: Implemented two new connection states Ahead/Behind
In this connection mode, the ahead node no longer replicates
application IO. The behind's disk becomes out dated.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:46 +01:00
Philipp Reisner
422028b1ca drbd: New configuration parameters for dealing with network congestion
net {
    on_congestion {block|pull-ahead|disconnect};
    congestion-fill {sectors};
    congestion-extents {al-extents};
}

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:45 +01:00
Philipp Reisner
759fbdfba6 drbd: Track the numbers of sectors in flight
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:43 +01:00
Lars Ellenberg
688593c5a8 drbd: Renamed write_flags_to_bio() to wire_flags_to_bio()
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:34:32 +01:00
Lars Ellenberg
4896e8c1b8 drbd: restore compatibility with 32bit kernels
With commit
drbd: further converge progress display of resync and online-verify
accidentally an u64/u64 div was introduced, causing an unresolvable
symbol __udivdi3 to be reference. Actually for that division, 32bit are
still suficient for now, so we can revert to unsigned long instead.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:13 +01:00
Lars Ellenberg
1816a2b47a drbd: properly use max_hw_sectors to limit the our bio size
To ease tracking of bios in some hash tables, we want it to
not cross certain boundaries (128k, used to be 32k).
We limit the maximum bio size using queue parameters.

Historically some defines and variables we use there have been named
max_segment_size, which was misguided. Rename them to max_bio_size,
and use [blk_]queue_max_hw_sectors where appropriate.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:11 +01:00
Lars Ellenberg
3129b1b9ae drbd: debug: limit nelink-broadcast of request on digest mismatch to 32k
We used to be limited to 32k requests,
but have increased that limit to 128k now.

This part of the code can only deal with 32k,
it would scramble arbitrary pages for larger requests.

As it is used for debugging only anyways,
it is ok to simply truncate the dumped data here.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:09 +01:00
Lars Ellenberg
470be44ab1 drbd: detect modification of in-flight buffers
With data-integrity digest enabled, double-check on the sending side
for modifications by upper layers of buffers under write back,
so we can tell it appart from corruption on the "wire".

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:08 +01:00
Lars Ellenberg
5f9915bbb8 drbd: further converge progress display of resync and online-verify
Show progressbar and ETA always, with proc_details >= 1 also show the
current sector position for both resync and online-verify on both nodes.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:06 +01:00
Lars Ellenberg
18edc0b9d7 drbd: fix potential wrap of 32bit oos:%lu display in /proc/drbd
When converting bits (4k resolution, still) to kB, we shift left.  If it
was a large number of bits on a 32bit box (>= 4 TiB storage), we may
wrap the 32bit unsigned long base type, resulting in incorrect display.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:04 +01:00
Lars Ellenberg
2649f0809f drbd: use the resync controller for online-verify requests as well
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:03 +01:00
Lars Ellenberg
e65f440d47 drbd: factor out drbd_rs_number_requests
Preparation patch to be able to use the auto-throttling resync controller
for online-verify requests as well.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:19:01 +01:00
Lars Ellenberg
9bd28d3c90 drbd: factor out drbd_rs_controller_reset
Preparation patch to be able to use the auto-throttling resync controller
for online-verify requests as well.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:18:59 +01:00
Lars Ellenberg
439d595379 drbd: show progress bar and ETA for online-verify
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:18:58 +01:00
Lars Ellenberg
ea5442aff6 drbd: advance progress step marks for online-verify
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:18:56 +01:00
Lars Ellenberg
c6ea14dfa3 drbd: factor out advancement of resync marks for progress reporting
This is in preparation to unify progress reporting of
online-verify and resync requests.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:18:54 +01:00
Lars Ellenberg
de228bba67 drbd: initialize online-verify progress tracking on verify target
For partial (resumed) online verify, initialize the resync step marks
once we know what the online verify start sector is.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:18:53 +01:00
Lars Ellenberg
30b743a2d5 drbd: improve online-verify progress tracking
For a partial (resumed) online-verify, initialize rs_total not to total
bits, but to number of bits to check in this run, to match the meaning
rs_total has for actual resync.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:18:51 +01:00
Lars Ellenberg
2652561886 drbd: only reset online-verify start sector if verify completed
For network hickups during online-verify, on the next verify
triggered, we by default want to resume where it left off.

After any replication link interruption, there will be a (possibly
empty) resync.  Do not reset online-verify start sector if some resync
completed, that would defeats the purpose.

Only reset the start sector once a verify run is completed.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10 11:18:49 +01:00
Jens Axboe
4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe
721a9602e6 block: kill off REQ_UNPLUG
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:27 +01:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Tejun Heo
3c0d206092 pktcdvd: Convert to bdops->check_events()
Convert from ->media_changed() to ->check_events().

pktcdvd needs to forward all event related operations to the
underlying device.  Forward ->check_events() instead of
->media_changed() and inherit disk->[async_]events.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Peter Osterlund <petero2@telia.com>
2011-03-09 19:54:28 +01:00
Tejun Heo
6fac80e3aa umem: Drop dummy ->media_changed()
umem doesn't implement media changed detection and there's no need to
implement dummy callback anymore.  Remove it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:28 +01:00
Tejun Heo
3a200911ad xsysace: Convert to bdops->check_events()
Convert from ->media_changed() to ->check_events().

xsysace buffers media changed state and clears it on revalidation.  It
will behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:28 +01:00
Tejun Heo
aaa7c01546 ub: Convert to bdops->check_events()
Convert from ->media_changed() to ->check_events().

ub buffers media changed state and clears it on revalidation.  It will
behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
2011-03-09 19:54:28 +01:00
Tejun Heo
4bbde77787 swim[3]: Convert to bdops->check_events()
Convert from ->media_changed() to ->check_events().

Both swim and swim3 buffer media changed state and clear it on
revalidation.  They will behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Laurent Vivier <laurent@lvivier.info>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-09 19:54:28 +01:00
Tejun Heo
507daea227 dac960: Convert to bdops->check_events()
Convert from ->media_changed() to ->check_events().

DAC960 media change notification seems to be one way (once set, never
cleared) and will generate spurious events when polled once the
condition triggers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:28 +01:00
Tejun Heo
b1b56b93f3 paride: Convert to bdops->check_events()
Convert paride drivers from ->media_changed() to ->check_events().

pcd and pd buffer and clear events after reporting; however, pf
unconditionally reports MEDIA_CHANGE and will generate spurious events
when polled.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tim Waugh <tim@cyberelk.net>
2011-03-09 19:54:28 +01:00
Tejun Heo
1a8a74f03f floppy,{ami|ata}flop: Convert to bdops->check_events()
Convert the floppy drivers from ->media_changed() to ->check_events().
Both floppy and ataflop buffer media changed state bit and clear them
on revalidation and will behave correctly with kernel event polling.

I can't tell how amiflop clears its event and it's possible that it
may generate spurious events when polled.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Owen Smith
51de69523f xen: Union the blkif_request request specific fields
Prepare for extending the block device ring to allow request
specific fields, by moving the request specific fields for
reads, writes and barrier requests to a union member.

Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Owen Smith <owen.smith@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-08 15:07:00 -05:00
Tejun Heo
e83a46bbb1 Merge branch 'for-linus' of ../linux-2.6-block into block-for-2.6.39/core
This merge creates two set of conflicts.  One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.

The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core.  The conflict
isn't trivial but the resolution is straight-forward.

* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
  should be called with @force_kblockd set to %true.

* elv_insert() in blk_kick_flush() should use
  %ELEVATOR_INSERT_REQUEUE.

Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.

Signed-off-by: Tejun Heo <tj@kernel.org>
2011-03-04 19:09:02 +01:00
David S. Miller
0a0e9ae1bd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x.h
2011-03-03 21:27:42 -08:00
Patrick McHardy
01a16b21d6 netlink: kill eff_cap from struct netlink_skb_parms
Netlink message processing in the kernel is synchronous these days,
capabilities can be checked directly in security_netlink_recv() from
the current process.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Reviewed-by: James Morris <jmorris@namei.org>
[chrisw: update to include pohmelfs and uvesafb]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 13:32:07 -08:00
Petr Uzel
fd51469fb6 block: kill loop_mutex
Following steps lead to deadlock in kernel:

dd if=/dev/zero of=img bs=512 count=1000
losetup -f img
mkfs.ext2 /dev/loop0
mount -t ext2 -o loop /dev/loop0 mnt
umount mnt/

Stacktrace:
[<c102ec04>] irq_exit+0x36/0x59
[<c101502c>] smp_apic_timer_interrupt+0x6b/0x75
[<c127f639>] apic_timer_interrupt+0x31/0x38
[<c101df88>] mutex_spin_on_owner+0x54/0x5b
[<fe2250e9>] lo_release+0x12/0x67 [loop]
[<c10c4eae>] __blkdev_put+0x7c/0x10c
[<c10a4da5>] fput+0xd5/0x1aa
[<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop]
[<fe225110>] lo_release+0x39/0x67 [loop]
[<c10c4eae>] __blkdev_put+0x7c/0x10c
[<c10a59d9>] deactivate_locked_super+0x17/0x36
[<c10b6f37>] sys_umount+0x27e/0x2a5
[<c10b6f69>] sys_oldumount+0xb/0xe
[<c1002897>] sysenter_do_call+0x12/0x26
[<ffffffff>] 0xffffffff

Regression since 2a48fc0ab2, which introduced the private
loop_mutex as part of the BKL removal process.

As per [1], the mutex can be safely removed.

[1] http://www.gossamer-threads.com/lists/linux/kernel/1341930

Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172

Signed-off-by: Petr Uzel <petr.uzel@suse.cz>
Cc: stable@kernel.org
Reviewed-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-03 11:53:25 -05:00
Vivek Goyal
cd25f54961 loop: No need to initialize ->queue_lock explicitly before calling blk_cleanup_queue()
Now we initialize ->queue_lock at queue allocation time so driver does
not have to worry about initializing it before calling
blk_cleanup_queue().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 19:06:49 -05:00
Grant Likely
1c48a5c93d dt: Eliminate of_platform_{,un}register_driver
Final step to eliminate of_platform_bus_type.  They're all just
platform drivers now.

v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 13:22:46 -07:00
Linus Torvalds
638691a7a4 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: Fix - again - partition detection when array becomes active
  Fix over-zealous flush_disk when changing device size.
  md: avoid spinlock problem in blk_throtl_exit
  md: correctly handle probe of an 'mdp' device.
  md: don't set_capacity before array is active.
  md: Fix raid1->raid0 takeover
2011-02-25 11:13:26 -08:00
Stefano Stabellini
c80a420995 xen-blkfront: handle Xen major numbers other than XENVBD
This patch makes sure blkfront handles correctly virtual device numbers
corresponding to Xen emulated IDE and SCSI disks: in those cases
blkfront translates the major number to XENVBD and the minor number to a
low xvd minor.

Note: this behaviour is different from what old xenlinux PV guests used
to do: they used to steal an IDE or SCSI major number and use it
instead.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2011-02-25 16:43:05 +00:00
NeilBrown
93b270f76e Fix over-zealous flush_disk when changing device size.
There are two cases when we call flush_disk.
In one, the device has disappeared (check_disk_change) so any
data will hold becomes irrelevant.
In the oter, the device has changed size (check_disk_size_change)
so data we hold may be irrelevant.

In both cases it makes sense to discard any 'clean' buffers,
so they will be read back from the device if needed.

In the former case it makes sense to discard 'dirty' buffers
as there will never be anywhere safe to write the data.  In the
second case it *does*not* make sense to discard dirty buffers
as that will lead to file system corruption when you simply enlarge
the containing devices.

flush_disk calls __invalidate_devices.
__invalidate_device calls both invalidate_inodes and invalidate_bdev.

invalidate_inodes *does* discard I_DIRTY inodes and this does lead
to fs corruption.

invalidate_bev *does*not* discard dirty pages, but I don't really care
about that at present.

So this patch adds a flag to __invalidate_device (calling it
__invalidate_device2) to indicate whether dirty buffers should be
killed, and this is passed to invalidate_inodes which can choose to
skip dirty inodes.

flusk_disk then passes true from check_disk_change and false from
check_disk_size_change.

dm avoids tripping over this problem by calling i_size_write directly
rathher than using check_disk_size_change.

md does use check_disk_size_change and so is affected.

This regression was introduced by commit 608aeef17a which causes
check_disk_size_change to call flush_disk, so it is suitable for any
kernel since 2.6.27.

Cc: stable@kernel.org
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-24 17:25:47 +11:00
Jiri Kosina
0a9d59a246 Merge branch 'master' into for-next 2011-02-15 10:24:31 +01:00
Soren Hansen
de1f016f88 nbd: remove module-level ioctl mutex
Commit 2a48fc0ab2 ("block: autoconvert trivial BKL users to private
mutex") replaced uses of the BKL in the nbd driver with mutex
operations.  Since then, I've been been seeing these lock ups:

 INFO: task qemu-nbd:16115 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 qemu-nbd      D 0000000000000001     0 16115  16114 0x00000004
  ffff88007d775d98 0000000000000082 ffff88007d775fd8 ffff88007d774000
  0000000000013a80 ffff8800020347e0 ffff88007d775fd8 0000000000013a80
  ffff880133730000 ffff880002034440 ffffea0004333db8 ffffffffa071c020
 Call Trace:
  [<ffffffff815b9997>] __mutex_lock_slowpath+0xf7/0x180
  [<ffffffff815b93eb>] mutex_lock+0x2b/0x50
  [<ffffffffa071a21c>] nbd_ioctl+0x6c/0x1c0 [nbd]
  [<ffffffff812cb970>] blkdev_ioctl+0x230/0x730
  [<ffffffff811967a1>] block_ioctl+0x41/0x50
  [<ffffffff81175c03>] do_vfs_ioctl+0x93/0x370
  [<ffffffff81175f61>] sys_ioctl+0x81/0xa0
  [<ffffffff8100c0c2>] system_call_fastpath+0x16/0x1b

Instrumenting the nbd module's ioctl handler with some extra logging
clearly shows the NBD_DO_IT ioctl being invoked which is a long-lived
ioctl in the sense that it doesn't return until another ioctl asks the
driver to disconnect.  However, that other ioctl blocks, waiting for the
module-level mutex that replaced the BKL, and then we're stuck.

This patch removes the module-level mutex altogether.  It's clearly
wrong, and as far as I can see, it's entirely unnecessary, since the nbd
driver maintains per-device mutexes, and I don't see anything that would
require a module-level (or kernel-level, for that matter) mutex.

Signed-off-by: Soren Hansen <soren@linux2go.dk>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>		[2.6.37.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11 16:12:20 -08:00
Justin P. Mattock
8e572bab39 fix typos 'comamnd' -> 'command' in comments
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
2011-02-02 11:31:21 +01:00
Stephen M. Cameron
68264e9d67 cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Tracey Dent
a0700bdd0b drivers/block/aoe/Makefile: replace the use of <module>-objs with <module>-y
Change Makefile to use <modules>-y instead of <modules>-objs because -objs
is deprecated and should now be switched.  According to
(documentation/kbuild/makefiles.txt).

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Sergey Senozhatsky
ee71a96867 loop: queue_lock NULL pointer derefence in blk_throtl_exit
Performing
$ sudo mount -o loop -o umask=0 /dev/sdb1 /mnt/
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

$ sudo modprobe -r loop

results in oops:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
 IP: [<ffffffff812479d4>] do_raw_spin_lock+0x14/0x122
 Process modprobe (pid: 6189, threadinfo ffff88009a898000, task ffff880154a88000)
 Call Trace:
  [<ffffffff81486788>] _raw_spin_lock_irq+0x4a/0x51
  [<ffffffff8123404b>] ? blk_throtl_exit+0x3b/0xa0
  [<ffffffff8105b120>] ? cancel_delayed_work_sync+0xd/0xf
  [<ffffffff8123404b>] blk_throtl_exit+0x3b/0xa0
  [<ffffffff81229bc8>] blk_release_queue+0x21/0x65
  [<ffffffff8123bb06>] kobject_release+0x51/0x66
  [<ffffffff8123bab5>] ? kobject_release+0x0/0x66
  [<ffffffff8123ce1e>] kref_put+0x43/0x4d
  [<ffffffff8123ba27>] kobject_put+0x47/0x4b
  [<ffffffff8122717c>] blk_cleanup_queue+0x56/0x5b
  [<ffffffffa01c3824>] loop_exit+0x68/0x844 [loop]
  [<ffffffff8107cccc>] sys_delete_module+0x1e8/0x25b
  [<ffffffff814864c9>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff81002112>] system_call_fastpath+0x16/0x1b

because of an attempt to acquire NULL queue_lock.
I added the same lines as in blk_queue_make_request -
index 44e18c0..49e6a54 100644`fall back to embedded per-queue lock'.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Tracey Dent
04de96c9c6 drivers/block/Makefile: replace the use of <module>-objs with <module>-y
Change Makefile to use <modules>-y instead of <modules>-objs because -objs
is deprecated and should now be switched.  According to
(documentation/kbuild/makefiles.txt).

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Linus Torvalds
7b0cb1bdac Merge branch 'for-2.6.38/drivers' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/drivers' of git://git.kernel.dk/linux-2.6-block:
  cciss: reinstate proper FIFO order of command queue list
  floppy: replace NO_GEOM macro with a function
2011-01-13 10:50:24 -08:00
Linus Torvalds
275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Linus Torvalds
a170315420 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix cleanup when trying to mount inexistent image
  net/ceph: make ceph_msgr_wq non-reentrant
  ceph: fsc->*_wq's aren't used in memory reclaim path
  ceph: Always free allocated memory in osdmap_decode()
  ceph: Makefile: Remove unnessary code
  ceph: associate requests with opening sessions
  ceph: drop redundant r_mds field
  ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS
  ceph: add dir_layout to inode
2011-01-13 10:25:24 -08:00
Yehuda Sadeh
766fc43973 rbd: fix cleanup when trying to mount inexistent image
Previously we didn't clean up the sysfs entry that was just
created.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-12 15:15:18 -08:00
Linus Torvalds
94d4c4cd56 Merge branch 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/xenbus: making backend support modular is too complex
  xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND
  xen/xenbus: fixup checkpatch issues in xenbus_probe*
  xen/netfront: select XEN_XENBUS_FRONTEND
  xen/xenbus: clean up noise in xenbus_probe_frontend.c
  xen/xenbus: clean up noise in xenbus_probe_backend.c
  xen/xenbus: clean up noise in xenbus_probe.c
  xen/xenbus: cleanup debug noise in xenbus_comms.c
  xen/xenbus: clean up error handling
  xen/xenbus: make frontend bus GPL
  xen/xenbus: make sure backend bus is registered earlier
  xenbus/frontend: register bus earlier
  xen: remove xen/evtchn.h
  xen: add backend driver support
  xen: separate out frontend xenbus
2011-01-12 08:37:35 -08:00
Jens Axboe
e6e1ee936d cciss: reinstate proper FIFO order of command queue list
Commit 8a3173de inadvertently changed the ordering when
switching to hlists. Change to regular list heads so we
can use tail list adds, this improves performance.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-10 21:50:33 +01:00
Linus Torvalds
23d69b09b7 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
  usb: don't use flush_scheduled_work()
  speedtch: don't abuse struct delayed_work
  media/video: don't use flush_scheduled_work()
  media/video: explicitly flush request_module work
  ioc4: use static work_struct for ioc4_load_modules()
  init: don't call flush_scheduled_work() from do_initcalls()
  s390: don't use flush_scheduled_work()
  rtc: don't use flush_scheduled_work()
  mmc: update workqueue usages
  mfd: update workqueue usages
  dvb: don't use flush_scheduled_work()
  leds-wm8350: don't use flush_scheduled_work()
  mISDN: don't use flush_scheduled_work()
  macintosh/ams: don't use flush_scheduled_work()
  vmwgfx: don't use flush_scheduled_work()
  tpm: don't use flush_scheduled_work()
  sonypi: don't use flush_scheduled_work()
  hvsi: don't use flush_scheduled_work()
  xen: don't use flush_scheduled_work()
  gdrom: don't use flush_scheduled_work()
  ...

Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
2011-01-07 16:58:04 -08:00
Ian Campbell
2de06cc1f1 xen: separate out frontend xenbus
Impact: refactor

Make a distinct frontend xenbus, in preparation for adding a backend xenbus.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[corresponds to 2fd433a4188f in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
 with adjustments to reflect changes in the code which is moved]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:29:17 -05:00
David S. Miller
17f7f4d9fc Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/ipv4/fib_frontend.c
2010-12-26 22:37:05 -08:00
Tejun Heo
30d65030fd xen: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush info->work instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-12-24 15:59:06 +01:00
Tejun Heo
8aa0f41384 floppy: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush floppy_work instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
2010-12-24 15:59:06 +01:00
Linus Torvalds
453434cf3f Fix build error in drivers/block/cciss.c
.. caused by a missing semi-colon, introduced in commit 0fc13c8995
("cciss: fix cciss_revalidate panic").

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Thiago Farina <tfransosi@gmail.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-20 21:21:49 -08:00
Linus Torvalds
7f8635cc9e Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix cciss_revalidate panic
  block: max hardware sectors limit wrapper
  block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
  blk-throttle: Correct the placement of smp_rmb()
  blk-throttle: Trim/adjust slice_end once a bio has been dispatched
  block: check for proper length of iov entries earlier in blk_rq_map_user_iov()
  drbd: fix for spin_lock_irqsave in endio callback
  drbd: don't recvmsg with zero length
2010-12-20 09:19:46 -08:00
Jens Axboe
3603b8eacc Fix compile warnings due to missing removal of a 'ret' variable
Commit a8adbe3 forgot to remove the return variable, kill it.

drivers/block/loop.c: In function 'lo_splice_actor':
drivers/block/loop.c:398: warning: unused variable 'ret'
[...]
fs/nfsd/vfs.c: In function 'nfsd_splice_actor':
fs/nfsd/vfs.c:848: warning: unused variable 'ret'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-20 09:15:19 +01:00
Stephen M. Cameron
0fc13c8995 cciss: fix cciss_revalidate panic
If you delete a logical drive, and then run BLKRRPART (e.g. via fdisk)
on a logical drive which is "after" the deleted logical drive in the h->drv[]
array, then cciss_revalidate panics because it will access the null pointer
h->drv[x] when x hits the deleted drive.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 09:01:37 +01:00
Michał Mirosław
a8adbe378b fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
This patch pulls calls to buf->ops->confirm() from all actors passed
(also indirectly) to splice_from_pipe_feed().

Is avoiding the call to buf->ops->confirm() while splice()ing to
/dev/null is an intentional optimization? No other user does that
and this will remove this special case.

Against current linux.git 6313e3c217.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:56:44 +01:00
Jeremy Fitzhardinge
667c78afae xen: Provide a variant of __RING_SIZE() that is an integer constant expression
Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where
this is being used to specify array sizes.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Miller <davem@davemloft.net>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-15 12:34:28 -08:00
Linus Torvalds
04ed0978d5 Merge branch 'rbd-sysfs' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'rbd-sysfs' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: replace the rbd sysfs interface
2010-12-02 08:05:22 -08:00
Yehuda Sadeh
dfc5606dc5 rbd: replace the rbd sysfs interface
The new interface creates directories per mapped image
and under each it creates a subdir per available snapshot.
This allows keeping a cleaner interface within the sysfs
guidelines. The ABI documentation was updated too.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 15:53:22 -08:00
Lars Ellenberg
a115413de1 drbd: fix for spin_lock_irqsave in endio callback
In commit 9b7f76dc37919ea36caa9680a3f765e5b19b25fb,
 Author: Lars Ellenberg <lars.ellenberg@linbit.com>
 Date:   Wed Aug 11 23:40:24 2010 +0200

    drbd: new configuration parameter c-min-rate

a bad chunk slipped through, which is now reverted as well,
restoring the correct irqsave for the endio callback.

This patch also add comments at both req_mod()
and in the endio callback so it should not happen again.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-11-27 19:50:43 +01:00
Lars Ellenberg
c13f7e1a94 drbd: don't recvmsg with zero length
This should fix a performance degradation we observed recently.

If we don't expect any subheader, we should not call into the tcp stack,
as that may add considerable latency if there is no data available at
this point.

For a synthetic synchronous write load with single outstanding writes,
this additional latency when processing the "unplug remote" packet
added up to a performance degradation factor >= 10.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-11-27 19:50:43 +01:00
Jens Axboe
f30195c502 Merge branch 'cleanup-bd_claim' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into for-2.6.38/core 2010-11-27 19:49:18 +01:00
Linus Torvalds
78daa87b1d Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix build for PROC_FS disabled
  block: fix amiga and atari floppy driver compile warning
  blk-throttle: Fix calculation of max number of WRITES to be dispatched
  ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()
  xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests
  xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER
  xen/blkfront: change blk_shadow.request to proper pointer
  xen/blkfront: map REQ_FLUSH into a full barrier
2010-11-27 07:17:50 +09:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Jens Axboe
bbe425cd9a cciss: fix build for PROC_FS disabled
The recent patch to fix the removal of a non-existing proc
directory introduced this build problem for !CONFIG_PROC_FS:

drivers/block/cciss.c:4929: error: 'proc_cciss' undeclared (first use in this function)

Fix it by moving proc_cciss outside of the CONFIG_PROC_FS scope.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-17 11:56:13 +01:00
Jeff Garzik
f281233d3e SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 13:33:23 -08:00
Vivek Goyal
3e9bb2a071 block: fix amiga and atari floppy driver compile warning
Geert, my crosstool don't produce warning below. I guess this has to do
something with compiler version.

- Geert noticed following warning during compilation.

  drivers/block/amiflop.c:1344: warning: ‘rq’ may be used uninitialized in
  this function
  drivers/block/ataflop.c:1402: warning: ‘rq’ may be used uninitialized in
  this function

- Initialize rq to NULL to fix the warning. If we can't find a suitable request
  to dispatch, this function should return NULL instead of a possibly garbage
  pointer.

- Cross compile tested only. Don't have hardware to test it.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 19:32:43 +01:00
David S. Miller
c25ecd0a21 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-11-14 11:57:05 -08:00
Tejun Heo
d4d7762995 block: clean up blkdev_get() wrappers and their users
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().

blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.

All users are converted.  Most conversions are mechanical and don't
introduce any behavior difference.  There are several exceptions.

* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
  reason to OR it explicitly on blkdev_put().

* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
  sb->s_mode.

* With the above changes, sb->s_mode now always should contain
  FMODE_EXCL.  WARN_ON_ONCE() added to kill_block_super() to detect
  errors.

The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:18 +01:00
Tejun Heo
e525fd89d3 block: make blkdev_get/put() handle exclusive access
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:17 +01:00
Linus Torvalds
8a9f772c14 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (27 commits)
  block: remove unused copy_io_context()
  Documentation: remove anticipatory scheduler info
  block: remove REQ_HARDBARRIER
  ioprio: rcu_read_lock/unlock protect find_task_by_vpid call (V2)
  ioprio: fix RCU locking around task dereference
  block: ioctl: fix information leak to userland
  block: read i_size with i_size_read()
  cciss: fix proc warning on attempt to remove non-existant directory
  bio: take care not overflow page count when mapping/copying user data
  block: limit vec count in bio_kmalloc() and bio_alloc_map_data()
  block: take care not to overflow when calculating total iov length
  block: check for proper length of iov entries in blk_rq_map_user_iov()
  cciss: remove controllers supported by hpsa
  cciss: use usleep_range not msleep for small sleeps
  cciss: limit commands allocated on reset_devices
  cciss: Use kernel provided PCI state save and restore functions
  cciss: fix board status waiting code
  drbd: Removed checks for REQ_HARDBARRIER on incomming BIOs
  drbd: REQ_HARDBARRIER -> REQ_FUA transition for meta data accesses
  drbd: Removed the BIO_RW_BARRIER support form the receiver/epoch code
  ...
2010-11-12 08:52:47 -08:00
Jens Axboe
1ff5125fb8 Merge branch 'upstream/blkfront' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into for-linus
Conflicts:
	drivers/block/xen-blkfront.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-12 08:47:04 +01:00
Christoph Hellwig
02e031cbc8 block: remove REQ_HARDBARRIER
REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:54:09 +01:00
Jens Axboe
00e375e7e9 Merge branch 'for-2.6.37/drivers' into for-linus
Conflicts:
	drivers/block/cciss.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:51:27 +01:00
Mike Snitzer
77304d2aba block: read i_size with i_size_read()
Convert direct reads of an inode's i_size to using i_size_read().

i_size_{read,write} use a seqcount to protect reads from accessing
incomple writes.  Concurrent i_size_write()s require mutual exclussion
to protect the seqcount that is used by i_size_{read,write}.  But
i_size_read() callers do not need to use additional locking.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:53 +01:00
Jens Axboe
90fdb0b98a cciss: fix proc warning on attempt to remove non-existant directory
Randy reports that he gets the following stack trace when
removing the cciss module:

[  109.164277] Pid: 3463, comm: rmmod Not tainted 2.6.37-rc1 #7
[  109.164280] Call Trace:
[  109.164292]  [<ffffffff8107eb8d>] warn_slowpath_common+0xc6/0xf3
[  109.164299]  [<ffffffff8107ecaa>] warn_slowpath_fmt+0x5b/0x6b
[  109.164307]  [<ffffffff8155175b>] ? _raw_spin_unlock+0x40/0x4b
[  109.164313]  [<ffffffff8123dd1e>] remove_proc_entry+0x156/0x35e
[  109.164320]  [<ffffffff812cd91b>] ? do_raw_spin_unlock+0xff/0x10f
[  109.164327]  [<ffffffff8113823d>] ? trace_hardirqs_on+0x10/0x4a
[  109.164333]  [<ffffffff8155162d>] ? _raw_spin_unlock_irq+0x4c/0x7b
[  109.164339]  [<ffffffff8154d4d1>] ? wait_for_common+0x145/0x15e
[  109.164345]  [<ffffffff81075337>] ? default_wake_function+0x0/0x22
[  109.164357]  [<ffffffffa0615a8f>] cciss_cleanup+0xa9/0xc7 [cciss]
[  109.164365]  [<ffffffff810d3cb0>] sys_delete_module+0x2d6/0x368
[  109.164371]  [<ffffffff8155036b>] ? lockdep_sys_exit_thunk+0x35/0x67
[  109.164377]  [<ffffffff810fdfaf>] ? audit_syscall_entry+0x172/0x1a5
[  109.164383]  [<ffffffff815502f5>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  109.164389]  [<ffffffff8100ea72>] system_call_fastpath+0x16/0x1b
[  109.164394] ---[ end trace 88e8568246ed0b1d ]---

which will happen if you don't actually have an HP CISS adapter,
since it'll do an uncondional removal of a proc directory it
never attempted to create in that case.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:52 +01:00
Eric Dumazet
840a185ddd aoe: remove dev_base_lock use from aoecmd_cfg_pkts()
dev_base_lock is the legacy way to lock the device list, and is planned
to disappear. (writers hold RTNL, readers hold RCU lock)

Convert aoecmd_cfg_pkts() to RCU locking.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08 13:50:07 -08:00
Pekka Enberg
2b51dca79a floppy: replace NO_GEOM macro with a function
This patch replaces the NO_GEOM macro with a proper static inline function and
converts an open-coded caller in check_floppy_change() to use it.

Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 14:44:34 +01:00
Vivek Goyal
d017bf6b4f floppy: fix another use-after-free
While scanning the floopy code due to c093ee4f07 ("floppy: fix
use-after-free in module load failure path"), I found one more instance
of trying to access disk->queue pointer after doing put_disk() on
gendisk.  For some reason , floppy moule still loads/unloads fine.  The
object is probably still around with right pointer values.

 o There seems to be one more instance of trying to cleanup the request
   queue after we have called put_disk() on associated gendisk.

 o This fix is more out of code inspection.  Even without this fix for
   some reason I am able to load/unload floppy module without any
   issues.

 o Floppy module loads/unloads fine after the fix.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-06 07:49:56 -07:00
Linus Torvalds
c093ee4f07 floppy: fix use-after-free in module load failure path
Commit 488211844e ("floppy: switch to one queue per drive instead of
sharing a queue") introduced a use-after-free.  We do "put_disk()" on
the disk device _before_ we then clean up the queue associated with that
disk.

Move the put_disk() down to avoid dereferencing a free'd data structure.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05 17:45:59 -07:00
Jeremy Fitzhardinge
dcb8baecea xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests
Some(?) Xen block backends fail BLKIF_OP_WRITE_BARRIER requests, which
Linux uses as a cache flush operation.  In that case, disable use
of FLUSH.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Daniel Stodden <daniel.stodden@citrix.com>
2010-11-02 13:46:46 -04:00
Jeremy Fitzhardinge
be2f8373c1 xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER
The BLKIF_OP_WRITE_BARRIER is a full ordered barrier, so we can use it
to implement FUA as well as a plain FLUSH.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Christoph Hellwig <hch@lst.de>
2010-11-02 11:27:59 -04:00
Jeremy Fitzhardinge
a945b9801a xen/blkfront: change blk_shadow.request to proper pointer
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-02 11:27:58 -04:00
Jeremy Fitzhardinge
c64e38ea17 xen/blkfront: map REQ_FLUSH into a full barrier
Implement a flush as a full barrier, since we have nothing weaker.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Christoph Hellwig <hch@lst.de>
2010-11-02 10:43:51 -04:00
Linus Torvalds
18cb657ca1 Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: register xen pci notifier
  xen: initialize cpu masks for pv guests in xen_smp_init
  xen: add a missing #include to arch/x86/pci/xen.c
  xen: mask the MTRR feature from the cpuid
  xen: make hvc_xen console work for dom0.
  xen: add the direct mapping area for ISA bus access
  xen: Initialize xenbus for dom0.
  xen: use vcpu_ops to setup cpu masks
  xen: map a dummy page for local apic and ioapic in xen_set_fixmap
  xen: remap MSIs into pirqs when running as initial domain
  xen: remap GSIs as pirqs when running as initial domain
  xen: introduce XEN_DOM0 as a silent option
  xen: map MSIs into pirqs
  xen: support GSI -> pirq remapping in PV on HVM guests
  xen: add xen hvm acpi_register_gsi variant
  acpi: use indirect call to register gsi in different modes
  xen: implement xen_hvm_register_pirq
  xen: get the maximum number of pirqs from xen
  xen: support pirq != irq

* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
  X86/PCI: Remove the dependency on isapnp_disable.
  xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
  MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
  x86: xen: Sanitse irq handling (part two)
  swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
  MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
  xen/pci: Request ACS when Xen-SWIOTLB is activated.
  xen-pcifront: Xen PCI frontend driver.
  xenbus: prevent warnings on unhandled enumeration values
  xenbus: Xen paravirtualised PCI hotplug support.
  xen/x86/PCI: Add support for the Xen PCI subsystem
  x86: Introduce x86_msi_ops
  msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
  x86/PCI: Export pci_walk_bus function.
  x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
  x86/PCI: Clean up pci_cache_line_size
  xen: fix shared irq device passthrough
  xen: Provide a variant of xen_poll_irq with timeout.
  xen: Find an unbound irq number in reverse order (high to low).
  xen: statically initialize cpu_evtchn_mask_p
  ...

Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28 17:11:17 -07:00
Mike Miller
6fa9775208 cciss: remove overlapping PCI IDs
This patch removes the controller overlap between cciss and hpsa. It was
decided that no overlap should exist. All new controllers will use the hpsa
SCSI based driver.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:33:27 -06:00
Vasiliy Kulikov
7ab5118d7c block: cciss: fix information leak to userland
Structure IOCTL_Command_struct is copied to userland with
some padding fields at the end of the struct unitialized.
It leads to leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:31:55 -06:00
Andrew Morton
027b180d74 drivers/block/aoe/aoeblk.c: ratelimit a warning printk
As described in https://bugzilla.kernel.org/show_bug.cgi?id=19922

: I had an AoE device go down overnight, and while a server was trying to
: write to it, it was also writing this message to its logs:
:
: 209                 printk(KERN_INFO "aoe: device %ld.%d is not up\n",
: 210                         d->aoemajor, d->aoeminor);
:
: The message appeared many times per second, and over several hours
: produced about 7.5 gigabytes of log files, filling up all free space on
: the root filesystem.

Cc: "Ed L. Cashin" <ecashin@coraid.com>
Suggested-by: Roman Mamedov <roman@rm.pp.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:15:26 -06:00
Geert Uytterhoeven
e1fbd9210d drivers/block/z2ram.c: correct printing of sector_t
If CONFIG_LBDAF=y, `sector_t' becomes `u64' instead of `unsigned long':

drivers/block/z2ram.c: In function ¡do_z2_request¢:
drivers/block/z2ram.c:83: warning: format %lu expects type `long unsigned int', but argument 2 has type `sector_t'

Hence always cast it to `unsigned long long' for printing.  Also do the
pr_err() dance, while we're at it.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:15:26 -06:00
Tejun Heo
5ad21a3374 aoe: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
Directly cancel aoedev->work on free instead of depending on
flush_scheduled_works().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:15:26 -06:00
Nicolas Kaiser
2027ae1fa9 drivers/block/drbd/drbd_main.c: fix error path
Failure to create drbd_ee_mempool appears not to get checked.  Looks like
a copy-and-paste problem to me.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-28 06:15:26 -06:00
Milan Broz
51a0bb0c2e loop: Properly clear sysfs in autoclear mode
In autoclear mode bdev is NULL but the sysfs
entry should be destroyed otherwise this warning appears:

WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x82/0x95()
sysfs: cannot create duplicate filename '/devices/virtual/block/loop0/loop'

Fixes commit ee86273062

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-27 19:51:30 -06:00
Peter Zijlstra
61ecdb801e mm: strictly nested kmap_atomic()
Ensure kmap_atomic() usage is strictly nested

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Linus Torvalds
51f00a471c Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mtd/m25p80: add support to parse the partitions by OF node
  of/irq: of_irq.c needs to include linux/irq.h
  of/mips: Cleanup some include directives/files.
  of/mips: Add device tree support to MIPS
  of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch
  of/device: Rework to use common platform_device_alloc() for allocating devices
  of/xsysace: Fix OF probing on little-endian systems
  of: use __be32 types for big-endian device tree data
  of/irq: remove references to NO_IRQ in drivers/of/platform.c
  of/promtree: add package-to-path support to pdt
  of/promtree: add of_pdt namespace to pdt code
  of/promtree: no longer call prom_ functions directly; use an ops structure
  of/promtree: make drivers/of/pdt.c no longer sparc-only
  sparc: break out some PROM device-tree building code out into drivers/of
  of/sparc: convert various prom_* functions to use phandle
  sparc: stop exporting openprom.h header
  powerpc, of_serial: Endianness issues setting up the serial ports
  of: MTD: Fix OF probing on little-endian systems
  of: GPIO: Fix OF probing on little-endian systems
2010-10-25 08:19:14 -07:00
Stephen M. Cameron
4205df3400 cciss: remove controllers supported by hpsa
We would prefer not to have any overlap between the two drivers.
Remove the cciss_allow_hpsa option, as it it is no longer needed.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:47:31 +02:00
Stephen M. Cameron
332c2f80a8 cciss: use usleep_range not msleep for small sleeps
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:09 +02:00
Stephen M. Cameron
186fb9cf6a cciss: limit commands allocated on reset_devices
This is to conserve memory in a memory-limited kdump scenario

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:08 +02:00
Stephen M. Cameron
f442e64b93 cciss: Use kernel provided PCI state save and restore functions
and use the doorbell reset method if available (which doesn't
lock up the controller if you properly save and restore all
the PCI registers that you're supposed to.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:07 +02:00
Stephen M. Cameron
afa842fa64 cciss: fix board status waiting code
After a reset, we should first wait for the board to become "not ready",
and then wait for it to become "ready", instead of immediately
waiting for it to become "ready", and do this waiting *after*
restoring PCI config space registers.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 18:45:06 +02:00
Jens Axboe
53c2eb24ff Merge branch 'for-jens' of git://git.drbd.org/linux-2.6-drbd into for-2.6.37/drivers 2010-10-23 18:43:55 +02:00
Philipp Reisner
650789c87f drbd: Removed checks for REQ_HARDBARRIER on incomming BIOs
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-23 13:02:34 +02:00
Philipp Reisner
a8a4e51e69 drbd: REQ_HARDBARRIER -> REQ_FUA transition for meta data accesses
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-23 13:01:45 +02:00
Philipp Reisner
2451fc3b2b drbd: Removed the BIO_RW_BARRIER support form the receiver/epoch code
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-23 13:00:48 +02:00
Linus Torvalds
5cc1035062 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.
2010-10-22 20:30:48 -07:00
Linus Torvalds
a2887097f2 Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...
2010-10-22 17:07:18 -07:00
Linus Torvalds
8abfc6e7a4 Merge branch 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block: (95 commits)
  cciss: fix PCI IDs for new Smart Array controllers
  drbd: add race-breaker to drbd_go_diskless
  drbd: use dynamic_dev_dbg to optionally log uuid changes
  dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not set
  drbd: cleanup: change "<= 0" to "== 0"
  drbd: relax the grace period of the md_sync timer again
  drbd: add some more explicit drbd_md_sync
  drbd: drop wrong debug asserts, fix recently introduced race
  drbd: cleanup useless leftover warn/error printk's
  drbd: add explicit drbd_md_sync to drbd_resync_finished
  drbd: Do not log an ASSERT for P_OV_REQUEST packets while C_CONNECTED
  drbd: fix for possible deadlock on IO error during resync
  drbd: fix unlikely access after free and list corruption
  drbd: fix for spurious fullsync (uuids rotated too fast)
  drbd: allow for explicit resync-finished notifications
  drbd: preparation commit, using full state in receive_state()
  drbd: drbd_send_ack_dp must not rely on header information
  drbd: Fix regression in recv_bm_rle_bits (compressed bitmap)
  drbd: Fixed a stupid copy and paste error
  drbd: Allow larger values for c-fill-target.
  ...

Fix up trivial conflict in drivers/block/ataflop.c due to BKL removal
2010-10-22 17:03:12 -07:00